board/plankton/usb_pd_policy.c: Format with clang-format

BUG=b:236386294
BRANCH=none
TEST=none

Change-Id: I726f230313d145a37fdfc5de3fafdaf61e8633e7
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3728836
Reviewed-by: Jeremy Bettis <jbettis@chromium.org>

1 files changed, 19 insertions, 24 deletions

diff --git a/board/plankton/usb_pd_policy.c b/board/plankton/usb_pd_policy.c
index 238f2297f5..51993dd1fa 100644
--- a/board/plankton/usb_pd_policy.c
+++ b/board/plankton/usb_pd_policy.c
@@ -18,8 +18,8 @@
 #include "usb_pd_pdo.h"
 #include "usb_pd_tcpm.h"
 
-#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
+#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ##args)
+#define CPRINTS(format, args...) cprints(CC_USBPD, format, ##args)
 
 /* Acceptable margin between requested VBUS and measured value */
 #define MARGIN_MV 400 /* mV */
@@ -27,7 +27,6 @@
 /* Whether alternate mode has been entered or not */
 static int alt_mode;
 
-
 void pd_set_input_current_limit(int port, uint32_t max_ma,
 				uint32_t supply_voltage)
 {
@@ -77,22 +76,18 @@ __override int pd_check_power_swap(int port)
 	return 1;
 }
 
-__override int pd_check_data_swap(int port,
-				  enum pd_data_role data_role)
+__override int pd_check_data_swap(int port, enum pd_data_role data_role)
 {
 	/* Always allow data swap */
 	return 1;
 }
 
-__override void pd_check_pr_role(int port,
-				 enum pd_power_role pr_role,
+__override void pd_check_pr_role(int port, enum pd_power_role pr_role,
 				 int flags)
 {
 }
 
-__override void pd_check_dr_role(int port,
-				 enum pd_data_role dr_role,
-				 int flags)
+__override void pd_check_dr_role(int port, enum pd_data_role dr_role, int flags)
 {
 	/* If Plankton is in USB hub mode, always act as UFP */
 	if (board_in_hub_mode() && dr_role == PD_ROLE_DFP &&
@@ -110,8 +105,8 @@ const uint32_t vdo_idh = VDO_IDH(0, /* data caps as USB host */
 const uint32_t vdo_product = VDO_PRODUCT(CONFIG_USB_PID, CONFIG_USB_BCD_DEV);
 
 const uint32_t vdo_ama = VDO_AMA(CONFIG_USB_PD_IDENTITY_HW_VERS,
-				 CONFIG_USB_PD_IDENTITY_SW_VERS,
-				 0, 0, 0, 0, /* SS[TR][12] */
+				 CONFIG_USB_PD_IDENTITY_SW_VERS, 0, 0, 0,
+				 0, /* SS[TR][12] */
 				 0, /* Vconn power */
 				 0, /* Vconn power required */
 				 1, /* Vbus power required */
@@ -139,13 +134,13 @@ static int svdm_response_svids(int port, uint32_t *payload)
 #define MODE_CNT 1
 #define OPOS 1
 
-const uint32_t vdo_dp_mode[MODE_CNT] =  {
-	VDO_MODE_DP(0,		   /* UFP pin cfg supported : none */
+const uint32_t vdo_dp_mode[MODE_CNT] = {
+	VDO_MODE_DP(0, /* UFP pin cfg supported : none */
 		    MODE_DP_PIN_E, /* DFP pin cfg supported */
-		    1,		   /* no usb2.0	signalling in AMode */
-		    CABLE_PLUG,	   /* its a plug */
-		    MODE_DP_V13,   /* DPv1.3 Support, no Gen2 */
-		    MODE_DP_SNK)   /* Its a sink only */
+		    1, /* no usb2.0	signalling in AMode */
+		    CABLE_PLUG, /* its a plug */
+		    MODE_DP_V13, /* DPv1.3 Support, no Gen2 */
+		    MODE_DP_SNK) /* Its a sink only */
 };
 
 static int svdm_response_modes(int port, uint32_t *payload)
@@ -167,13 +162,13 @@ static int dp_status(int port, uint32_t *payload)
 	if (opos != OPOS)
 		return 0; /* nak */
 
-	payload[1] = VDO_DP_STATUS(0,                /* IRQ_HPD */
-				   (hpd == 1),       /* HPD_HI|LOW */
-				   0,		     /* request exit DP */
-				   0,		     /* request exit USB */
-				   0,		     /* MF pref */
+	payload[1] = VDO_DP_STATUS(0, /* IRQ_HPD */
+				   (hpd == 1), /* HPD_HI|LOW */
+				   0, /* request exit DP */
+				   0, /* request exit USB */
+				   0, /* MF pref */
 				   !gpio_get_level(GPIO_USBC_SS_USB_MODE),
-				   0,		     /* power low */
+				   0, /* power low */
 				   0x2);
 	return 2;
 }