ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 213 deletions

diff --git a/baseboard/brask/baseboard.h b/baseboard/brask/baseboard.h
deleted file mode 100644
index 4b9d8f386a..0000000000
--- a/baseboard/brask/baseboard.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Brask baseboard configuration */
-
-#ifndef __CROS_EC_BASEBOARD_H
-#define __CROS_EC_BASEBOARD_H
-
-/*
- * By default, enable all console messages excepted HC
- */
-#define CC_DEFAULT     (CC_ALL & ~(BIT(CC_HOSTCMD)))
-
-/* NPCX9 config */
-#define NPCX9_PWM1_SEL    1  /* GPIO C2 is used as PWM1. */
-/*
- * This defines which pads (GPIO10/11 or GPIO64/65) are connected to
- * the "UART1" (NPCX_UART_PORT0) controller when used for
- * CONSOLE_UART.
- */
-#define NPCX_UART_MODULE2	1 /* 1:GPIO64/65 for UART1 */
-
-/* CrOS Board Info */
-#define CONFIG_CBI_EEPROM
-#define CONFIG_BOARD_VERSION_CBI
-#define CONFIG_CRC8
-
-/* EC Defines */
-#define CONFIG_LTO
-#define CONFIG_FPU
-
-/* Verified boot configs */
-#define CONFIG_VBOOT_EFS2
-#define CONFIG_VBOOT_HASH
-#define CONFIG_VSTORE
-#define CONFIG_VSTORE_SLOT_COUNT 1
-
-/* Work around double CR50 reset by waiting in initial power on. */
-#define CONFIG_BOARD_RESET_AFTER_POWER_ON
-
-/* Host communication */
-#define CONFIG_HOSTCMD_ESPI
-#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4
-#define CONFIG_HOSTCMD_ESPI_RESET_SLP_SX_VW_ON_ESPI_RST
-
-/* LED */
-#define CONFIG_LED_COMMON
-
-/* Common charger defines */
-#define CONFIG_CHARGE_MANAGER
-
-/* USBC BC1.2 */
-#define CONFIG_USB_CHARGER
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-/* Support Barrel Jack */
-#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT
-#define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1
-/*
- * TODO(b/197475210): Don't allow the system to boot to S0 when
- * the power is lower than CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON
- * since there is no battery.
- */
-#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON		30000
-
-/* Chipset config */
-#define CONFIG_CHIPSET_ALDERLAKE_SLG4BD44540
-#define CONFIG_CHIPSET_RESET_HOOK
-#define CONFIG_CHIPSET_CAN_THROTTLE
-#define CONFIG_CPU_PROCHOT_ACTIVE_LOW
-#define CONFIG_EXTPOWER_GPIO
-#define CONFIG_POWER_S0IX
-#define CONFIG_POWER_SLEEP_FAILURE_DETECTION
-#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE
-
-/*
- * TODO(b/191742284): When DAM enabled coreboot image is flashed on top of DAM
- * disabled coreboot, S5 exit is taking more than 4 seconds, then EC triggers
- * system shutdown. This WA deselects CONFIG_BOARD_HAS_RTC_RESET to prevent
- * EC from system shutdown.
- */
-/* #define CONFIG_BOARD_HAS_RTC_RESET */
-
-#define CONFIG_CMD_AP_RESET_LOG
-#define CONFIG_HOSTCMD_AP_RESET
-
-/* Buttons */
-#define CONFIG_DEDICATED_RECOVERY_BUTTON
-#define CONFIG_DEDICATED_RECOVERY_BUTTON_2
-#define CONFIG_EMULATED_SYSRQ
-#define CONFIG_POWER_BUTTON
-#define CONFIG_POWER_BUTTON_IGNORE_LID
-#define CONFIG_POWER_BUTTON_INIT_IDLE
-#define CONFIG_POWER_BUTTON_X86
-
-/* Matrix Keyboard Protocol */
-#define CONFIG_MKBP_EVENT
-#define CONFIG_MKBP_INPUT_DEVICES
-#define CONFIG_MKBP_USE_HOST_EVENT
-
-/* Thermal features */
-#define CONFIG_DPTF
-#define CONFIG_THROTTLE_AP
-
-#define CONFIG_PWM
-
-/* Enable I2C Support */
-#define CONFIG_I2C
-#define CONFIG_I2C_CONTROLLER
-
-/* UART COMMAND */
-#define CONFIG_CMD_CHARGEN
-
-/* USB Type C and USB PD defines */
-/* Enable the new USB-C PD stack */
-#define CONFIG_USB_PD_TCPMV2
-#define CONFIG_USB_DRP_ACC_TRYSRC
-#define CONFIG_USB_PD_REV30
-
-#define CONFIG_CMD_HCDEBUG
-#define CONFIG_CMD_PPC_DUMP
-#define CONFIG_CMD_TCPC_DUMP
-
-#define CONFIG_USB_POWER_DELIVERY
-#define CONFIG_USB_PD_ALT_MODE
-#define CONFIG_USB_PD_ALT_MODE_DFP
-#define CONFIG_USB_PD_ALT_MODE_UFP
-#define CONFIG_USB_PD_DISCHARGE_PPC
-#define CONFIG_USB_PD_DUAL_ROLE
-#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
-#define CONFIG_USB_PD_TCPC_LOW_POWER
-#define CONFIG_USB_PD_TCPM_TCPCI
-#define CONFIG_USB_PD_TCPM_NCT38XX
-
-#define CONFIG_USB_PD_TCPM_MUX
-#define CONFIG_HOSTCMD_PD_CONTROL		/* Needed for TCPC FW update */
-#define CONFIG_CMD_USB_PD_PE
-
-/*
- * The PS8815 TCPC was found to require a 50ms delay to consistently work
- * with non-PD chargers.  Override the default low-power mode exit delay.
- */
-#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
-#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE	(50*MSEC)
-
-/* Enable USB3.2 DRD */
-#define CONFIG_USB_PD_USB32_DRD
-
-#define CONFIG_USB_PD_TRY_SRC
-#define CONFIG_USB_PD_VBUS_DETECT_TCPC
-
-#define CONFIG_USBC_PPC
-/* Note - SN5S330 support automatically adds
- * CONFIG_USBC_PPC_POLARITY
- * CONFIG_USBC_PPC_SBU
- * CONFIG_USBC_PPC_VCONN
- */
-#define CONFIG_USBC_PPC_DEDICATED_INT
-
-#define CONFIG_USBC_SS_MUX
-#define CONFIG_USB_MUX_VIRTUAL
-
-#define CONFIG_USBC_VCONN
-#define CONFIG_USBC_VCONN_SWAP
-
-/* Enabling SOP* communication */
-#define CONFIG_CMD_USB_PD_CABLE
-#define CONFIG_USB_PD_DECODE_SOP
-
-/*
- * USB ID
- * This is allocated specifically for Brask
- * http://google3/hardware/standards/usb/
- */
-#define CONFIG_USB_PID 0x5058
-/* Device version of product. */
-#define CONFIG_USB_BCD_DEV 0x0000
-
-/* Remove predefined features */
-#undef CONFIG_HIBERNATE
-#undef CONFIG_KEYBOARD_BOOT_KEYS
-#undef CONFIG_KEYBOARD_RUNTIME_KEYS
-#undef CONFIG_LID_SWITCH
-#undef CONFIG_KEYBOARD_VIVALDI
-
-#ifndef __ASSEMBLER__
-
-#include <stdbool.h>
-#include <stdint.h>
-
-#include "common.h"
-#include "baseboard_usbc_config.h"
-#include "extpower.h"
-
-/*
- * Configure run-time data structures and operation based on CBI data. This
- * typically includes customization for changes in the BOARD_VERSION and
- * FW_CONFIG fields in CBI. This routine is called from the baseboard after
- * the CBI data has been initialized.
- */
-__override_proto void board_cbi_init(void);
-
-/*
- * Initialize the FW_CONFIG from CBI data. If the CBI data is not valid, set the
- * FW_CONFIG to the board specific defaults.
- */
-__override_proto void board_init_fw_config(void);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BASEBOARD_H */