ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 259 deletions

diff --git a/baseboard/brya/baseboard.h b/baseboard/brya/baseboard.h
deleted file mode 100644
index 757b504d16..0000000000
--- a/baseboard/brya/baseboard.h
+++ /dev/null
@@ -1,259 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Brya baseboard configuration */
-
-#ifndef __CROS_EC_BASEBOARD_H
-#define __CROS_EC_BASEBOARD_H
-
-/*
- * By default, enable all console messages excepted HC, ACPI and event:
- * The sensor stack is generating a lot of activity.
- */
-#define CC_DEFAULT     (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC)))
-#undef CONFIG_HOSTCMD_DEBUG_MODE
-#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF
-
-/* NPCX9 config */
-#define NPCX9_PWM1_SEL    1  /* GPIO C2 is used as PWM1. */
-/*
- * This defines which pads (GPIO10/11 or GPIO64/65) are connected to
- * the "UART1" (NPCX_UART_PORT0) controller when used for
- * CONSOLE_UART.
- */
-#define NPCX_UART_MODULE2	1 /* 1:GPIO64/65 for UART1 */
-
-/* EC Defines */
-#define CONFIG_LTO
-#define CONFIG_CBI_EEPROM
-#define CONFIG_BOARD_VERSION_CBI
-#define CONFIG_CRC8
-#define CONFIG_DPTF
-#define CONFIG_FPU
-
-/* Verified boot configs */
-#define CONFIG_VBOOT_EFS2
-#define CONFIG_VBOOT_HASH
-#define CONFIG_VSTORE
-#define CONFIG_VSTORE_SLOT_COUNT 1
-
-#define CONFIG_HIBERNATE_PSL
-
-/* Work around double CR50 reset by waiting in initial power on. */
-#define CONFIG_BOARD_RESET_AFTER_POWER_ON
-
-/* Host communication */
-#define CONFIG_HOSTCMD_ESPI
-#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4
-
-/*
- * TODO(b/179648721): implement sensors
- */
-#define CONFIG_TABLET_MODE
-#define CONFIG_TABLET_MODE_SWITCH
-#define CONFIG_GMR_TABLET_MODE
-
-#define CONFIG_MKBP_EVENT
-#define CONFIG_MKBP_USE_HOST_EVENT
-#define CONFIG_MKBP_INPUT_DEVICES
-
-/* LED */
-#define CONFIG_LED_COMMON
-
-/* Common charger defines */
-#define CONFIG_CHARGE_MANAGER
-#define CONFIG_CHARGER
-#define CONFIG_CHARGER_DISCHARGE_ON_AC
-#define CONFIG_CHARGER_INPUT_CURRENT		512
-
-#define CONFIG_CMD_CHARGER_DUMP
-
-#define CONFIG_USB_CHARGER
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-/*
- * Don't allow the system to boot to S0 when the battery is low and unable to
- * communicate on locked systems (which haven't PD negotiated)
- */
-#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT	15000
-#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON		15001
-
-/* Common battery defines */
-#define CONFIG_BATTERY_SMART
-#define CONFIG_BATTERY_FUEL_GAUGE
-#define CONFIG_BATTERY_CUT_OFF
-#define CONFIG_BATTERY_PRESENT_CUSTOM
-#define CONFIG_BATTERY_HW_PRESENT_CUSTOM
-#define CONFIG_BATTERY_REVIVE_DISCONNECT
-#define CONFIG_CMD_BATT_MFG_ACCESS
-/*
- * Enable support for battery hostcmd, supporting longer strings.
- * support for EC_CMD_BATTERY_GET_STATIC version 1.
- */
-#define CONFIG_BATTERY_V2
-#define CONFIG_BATTERY_COUNT 1
-#define CONFIG_HOSTCMD_BATTERY_V2
-
-/* Chipset config */
-#define CONFIG_CHIPSET_ALDERLAKE_SLG4BD44540
-
-#define CONFIG_CHIPSET_RESET_HOOK
-#define CONFIG_CPU_PROCHOT_ACTIVE_LOW
-#define CONFIG_EXTPOWER_GPIO
-#define CONFIG_POWER_BUTTON
-#define CONFIG_POWER_BUTTON_X86
-#define CONFIG_POWER_S0IX
-#define CONFIG_POWER_SLEEP_FAILURE_DETECTION
-#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE
-#define CONFIG_LOW_POWER_IDLE
-
-#define CONFIG_HOSTCMD_ESPI_RESET_SLP_SX_VW_ON_ESPI_RST
-
-/*
- * TODO(b/191742284): When DAM enabled coreboot image is flashed on top of DAM
- * disabled coreboot, S5 exit is taking more than 4 seconds, then EC triggers
- * system shutdown. This WA deselects CONFIG_BOARD_HAS_RTC_RESET to prevent
- * EC from system shutdown.
- */
-/* #define CONFIG_BOARD_HAS_RTC_RESET */
-
-#define CONFIG_CMD_AP_RESET_LOG
-#define CONFIG_HOSTCMD_AP_RESET
-
-/* Buttons / Switches */
-#define CONFIG_VOLUME_BUTTONS
-#define CONFIG_SWITCH
-
-/* Common Keyboard Defines */
-#define CONFIG_CMD_KEYBOARD
-
-#define CONFIG_KEYBOARD_COL2_INVERTED
-#define CONFIG_KEYBOARD_KEYPAD
-#define CONFIG_KEYBOARD_PROTOCOL_8042
-#ifdef CONFIG_KEYBOARD_VIVALDI
-#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI2
-#else
-#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI3
-#endif
-
-/* Thermal features */
-#define CONFIG_THROTTLE_AP
-#define CONFIG_CHIPSET_CAN_THROTTLE
-
-#define CONFIG_PWM
-
-/* Enable I2C Support */
-#define CONFIG_I2C
-#define CONFIG_I2C_CONTROLLER
-
-/* EDP back-light control defines */
-#define CONFIG_BACKLIGHT_LID
-
-/* UART COMMAND */
-#define CONFIG_CMD_CHARGEN
-
-/* USB Type C and USB PD defines */
-/* Enable the new USB-C PD stack */
-#define CONFIG_USB_PD_TCPMV2
-#define CONFIG_USB_DRP_ACC_TRYSRC
-#define CONFIG_USB_PD_REV30
-
-#define CONFIG_CMD_HCDEBUG
-#define CONFIG_CMD_PPC_DUMP
-#define CONFIG_CMD_TCPC_DUMP
-
-#define CONFIG_USB_POWER_DELIVERY
-#define CONFIG_USB_PD_ALT_MODE
-#define CONFIG_USB_PD_ALT_MODE_DFP
-#define CONFIG_USB_PD_ALT_MODE_UFP
-#define CONFIG_USB_PD_DISCHARGE_PPC
-#define CONFIG_USB_PD_DUAL_ROLE
-#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
-#define CONFIG_USB_PD_TCPC_LOW_POWER
-#define CONFIG_USB_PD_TCPM_TCPCI
-#define CONFIG_USB_PD_TCPM_NCT38XX
-
-#define CONFIG_USB_PD_TCPM_MUX
-#define CONFIG_HOSTCMD_PD_CONTROL		/* Needed for TCPC FW update */
-#define CONFIG_CMD_USB_PD_PE
-
-/*
- * The PS8815 TCPC was found to require a 50ms delay to consistently work
- * with non-PD chargers.  Override the default low-power mode exit delay.
- */
-#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
-#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE	(50*MSEC)
-
-/* Enable USB3.2 DRD */
-#define CONFIG_USB_PD_USB32_DRD
-
-#define CONFIG_USB_PD_TRY_SRC
-#define CONFIG_USB_PD_VBUS_DETECT_TCPC
-
-#define CONFIG_USBC_PPC
-/* Note - SN5S330 support automatically adds
- * CONFIG_USBC_PPC_POLARITY
- * CONFIG_USBC_PPC_SBU
- * CONFIG_USBC_PPC_VCONN
- */
-#define CONFIG_USBC_PPC_DEDICATED_INT
-
-#define CONFIG_USBC_SS_MUX
-#define CONFIG_USB_MUX_VIRTUAL
-
-#define CONFIG_USBC_VCONN
-#define CONFIG_USBC_VCONN_SWAP
-
-/* Enabling SOP* communication */
-#define CONFIG_CMD_USB_PD_CABLE
-#define CONFIG_USB_PD_DECODE_SOP
-
-/*
- * USB ID
- * This is allocated specifically for Brya
- * http://google3/hardware/standards/usb/
- */
-#define CONFIG_USB_PID 0x504F
-/* Device version of product. */
-#define CONFIG_USB_BCD_DEV 0x0000
-
-#ifndef __ASSEMBLER__
-
-#include <stdbool.h>
-#include <stdint.h>
-
-#include "common.h"
-#include "baseboard_usbc_config.h"
-#include "extpower.h"
-
-/**
- * Configure run-time data structures and operation based on CBI data. This
- * typically includes customization for changes in the BOARD_VERSION and
- * FW_CONFIG fields in CBI. This routine is called from the baseboard after
- * the CBI data has been initialized.
- */
-__override_proto void board_cbi_init(void);
-
-/**
- * Initialize the FW_CONFIG from CBI data. If the CBI data is not valid, set the
- * FW_CONFIG to the board specific defaults.
- */
-__override_proto void board_init_fw_config(void);
-
-/*
- * Check battery disconnect state.
- * This function will return if battery is initialized or not.
- * @return true - initialized. false - not.
- */
-__override_proto bool board_battery_is_initialized(void);
-
-/*
- * Return the board revision number.
- */
-uint8_t get_board_id(void);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BASEBOARD_H */