drop unnecessary boards, chips and cts tests

The only board which would be built from this branch is Cr50. bds,
fizz and host boards are necessary for proper make infrastructure
operation and tests.

lm4 and npcx are chips used by the bds and fizz boards, so they are
also kept around.

BRANCH=cr50, cr50-mp
BUG=b:145912698
TEST='make buildall -j' succeeds

Change-Id: I937b2b8642c1fe91578fc9615438ae22c165b20f
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1986942
Reviewed-by: Namyoon Woo <namyoon@chromium.org>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>

1 files changed, 0 insertions, 188 deletions

diff --git a/baseboard/intelrvp/baseboard.c b/baseboard/intelrvp/baseboard.c
deleted file mode 100644
index 50aa4d83db..0000000000
--- a/baseboard/intelrvp/baseboard.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Intel-RVP family-specific configuration */
-
-#include "adc_chip.h"
-#include "charge_state.h"
-#include "espi.h"
-#include "fan.h"
-#include "hooks.h"
-#include "pca9555.h"
-#include "peci.h"
-#include "power.h"
-#include "temp_sensor.h"
-#include "thermistor.h"
-
-/* Wake-up pins for hibernate */
-const enum gpio_signal hibernate_wake_pins[] = {
-	GPIO_AC_PRESENT,
-	GPIO_LID_OPEN,
-	GPIO_POWER_BUTTON_L,
-};
-const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SNS_AMBIENT] = {
-		.name = "ADC_TEMP_SNS_AMBIENT",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = ADC_TEMP_SNS_AMBIENT_CHANNEL,
-	},
-	[ADC_TEMP_SNS_DDR] = {
-		.name = "ADC_TEMP_SNS_DDR",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = ADC_TEMP_SNS_DDR_CHANNEL,
-	},
-	[ADC_TEMP_SNS_SKIN] = {
-		.name = "ADC_TEMP_SNS_SKIN",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = ADC_TEMP_SNS_SKIN_CHANNEL,
-	},
-	[ADC_TEMP_SNS_VR] = {
-		.name = "ADC_TEMP_SNS_VR",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = ADC_TEMP_SNS_VR_CHANNEL,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-#ifdef CONFIG_TEMP_SENSOR
-/* Temperature sensors */
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SNS_AMBIENT] = {
-		.name = "Ambient",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v0_22k6_47k_4050b,
-		.idx = ADC_TEMP_SNS_AMBIENT,
-		.action_delay_sec = 5,
-	},
-	[TEMP_SNS_BATTERY] = {
-		.name = "Battery",
-		.type = TEMP_SENSOR_TYPE_BATTERY,
-		.read = charge_get_battery_temp,
-		.idx = 0,
-		.action_delay_sec = 1,
-	},
-	[TEMP_SNS_DDR] = {
-		.name = "DDR",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v0_22k6_47k_4050b,
-		.idx = ADC_TEMP_SNS_DDR,
-		.action_delay_sec = 1,
-	},
-#ifdef CONFIG_PECI
-	[TEMP_SNS_PECI] = {
-		.name = "PECI",
-		.type = TEMP_SENSOR_TYPE_CPU,
-		.read = peci_temp_sensor_get_val,
-		.idx = 0,
-		.action_delay_sec = 1,
-	},
-#endif /* CONFIG_PECI */
-	[TEMP_SNS_SKIN] = {
-		.name = "Skin",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v0_22k6_47k_4050b,
-		.idx = ADC_TEMP_SNS_SKIN,
-		.action_delay_sec = 1,
-	},
-	[TEMP_SNS_VR] = {
-		.name = "VR",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v0_22k6_47k_4050b,
-		.idx = ADC_TEMP_SNS_VR,
-		.action_delay_sec = 1,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-#endif /* CONFIG_TEMP_SENSOR */
-
-#ifdef CONFIG_FANS
-/* Physical fan config */
-const struct fan_conf fan_conf_0 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = 0,
-	.pgood_gpio = GPIO_ALL_SYS_PWRGD,
-	.enable_gpio = GPIO_FAN_POWER_EN,
-};
-
-/* Physical fan rpm config */
-const struct fan_rpm fan_rpm_0 = {
-	.rpm_min = BOARD_FAN_MIN_RPM,
-	.rpm_start = BOARD_FAN_MIN_RPM,
-	.rpm_max = BOARD_FAN_MAX_RPM,
-};
-
-/* FAN channels */
-const struct fan_t fans[] = {
-	[FAN_CH_0] = {
-		.conf = &fan_conf_0,
-		.rpm = &fan_rpm_0,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT);
-
-const static struct ec_thermal_config thermal_a = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-	.temp_fan_off = C_TO_K(15),
-	.temp_fan_max = C_TO_K(50),
-};
-
-struct ec_thermal_config thermal_params[] = {
-	[TEMP_SNS_AMBIENT] = thermal_a,
-	[TEMP_SNS_BATTERY] = thermal_a,
-	[TEMP_SNS_DDR] = thermal_a,
-#ifdef CONFIG_PECI
-	[TEMP_SNS_PECI] = thermal_a,
-#endif
-	[TEMP_SNS_SKIN] = thermal_a,
-	[TEMP_SNS_VR] = thermal_a,
-};
-BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
-#endif /* CONFIG_FANS */
-
-static void board_init(void)
-{
-	/* Enable SOC SPI */
-	gpio_set_level(GPIO_EC_SPI_OE_N, 1);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_LAST);
-
-static void board_interrupts_init(void)
-{
-	/* DC Jack interrupt */
-	gpio_enable_interrupt(GPIO_DC_JACK_PRESENT);
-}
-DECLARE_HOOK(HOOK_INIT, board_interrupts_init, HOOK_PRIO_FIRST);
-
-int ioexpander_read_intelrvp_version(int *port0, int *port1)
-{
-	if (pca9555_read(I2C_PORT_PCA9555_BOARD_ID_GPIO,
-		I2C_ADDR_PCA9555_BOARD_ID_GPIO,
-		PCA9555_CMD_INPUT_PORT_0, port0))
-		return -1;
-
-	return pca9555_read(I2C_PORT_PCA9555_BOARD_ID_GPIO,
-		I2C_ADDR_PCA9555_BOARD_ID_GPIO,
-		PCA9555_CMD_INPUT_PORT_1, port1);
-}