diff options
| author | Jack Rosenthal <jrosenth@chromium.org> | 2021-11-04 12:11:58 -0600 |
|---|---|---|
| committer | Commit Bot <commit-bot@chromium.org> | 2021-11-05 04:22:34 +0000 |
| commit | 252457d4b21f46889eebad61d4c0a65331919cec (patch) | |
| tree | 01856c4d31d710b20e85a74c8d7b5836e35c3b98 /board/atlas/gpio.inc | |
| parent | 08f5a1e6fc2c9467230444ac9b582dcf4d9f0068 (diff) | |
| download | chrome-ec-stabilize-14695.85.B-ish.tar.gz | |
ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
Diffstat (limited to 'board/atlas/gpio.inc')
| -rw-r--r-- | board/atlas/gpio.inc | 157 |
1 files changed, 0 insertions, 157 deletions
diff --git a/board/atlas/gpio.inc b/board/atlas/gpio.inc deleted file mode 100644 index 4ce44cc130..0000000000 --- a/board/atlas/gpio.inc +++ /dev/null @@ -1,157 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -/* USB PD interrupt handler section */ -GPIO_INT(USB_C0_PD_INT_ODL, PIN(6, 1), GPIO_INT_FALLING | GPIO_PULL_UP, tcpc_alert_event) -GPIO_INT(USB_C1_PD_INT_ODL, PIN(F, 5), GPIO_INT_FALLING | GPIO_PULL_UP, tcpc_alert_event) - -/* power seq interrupt handler section */ -GPIO_INT(ROP_DSW_PWROK_EC, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(ROP_EC_RSMRST_L, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(MECH_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt) -GPIO_INT(SLP_S0_L, PIN(A, 4), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SLP_SUS_L_PCH, PIN(D, 4), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(ROP_EC_ACOK, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) - -/* misc interrupt handler section */ -GPIO_INT(EC_WP_L, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) - -/* SoC section */ -GPIO(RSMRST_L, PIN(3, 7), GPIO_OUT_LOW) /* SOC Resume Reset */ -GPIO(EC_PCH_PWR_BTN_L, PIN(C, 1), GPIO_OUT_HIGH) /* Power button to SOC */ -GPIO(EC_PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW) /* RTC Reset (broken) */ -GPIO(EC_PCH_WAKE_L, PIN(7, 4), GPIO_ODR_HIGH) /* PCH wake */ -GPIO(EC_PROCHOT_ODL, PIN(3, 4), GPIO_ODR_HIGH | GPIO_SEL_1P8V) /* SOC PROCHOT# */ -GPIO(SYS_RESET_L, PIN(0, 2), GPIO_ODR_HIGH) /* SOC reset */ -GPIO(USB_C0_DP_HPD, PIN(C, 5), GPIO_INPUT) /* C0 Hotplug Detect */ -GPIO(USB_C1_DP_HPD, PIN(C, 6), GPIO_INPUT) /* C1 Hotplug Detect */ - -/* power seq section */ -GPIO(EC_PCH_ACPRESENT, PIN(7, 3), GPIO_ODR_LOW) /* ACOK to SOC */ -/* note: SLP_SUS_L_PMIC is an input in the schematics */ -GPIO(SLP_SUS_L_PMIC, PIN(E, 4), GPIO_OUT_LOW) /* SOC SLP_SUS# */ -GPIO(SLP_S4_L, PIN(A, 3), GPIO_INPUT) /* SOC SLP_S4# */ -GPIO(SLP_S3_L, PIN(A, 6), GPIO_INPUT) /* SOC SLP_S3# */ -GPIO(ROP_INT_L, PIN(D, 5), GPIO_INPUT | GPIO_PULL_UP) /* PMIC IRQ (Unused) */ - -/* USB PD section */ -GPIO(EN_USB_C0_5V_OUT, PIN(6, 7), GPIO_OUT_LOW) /* C0 5V Enable */ -GPIO(EN_USB_C0_CHARGE_L, PIN(0, 3), GPIO_OUT_LOW) /* alt fn */ -GPIO(EN_USB_C0_3A, PIN(6, 2), GPIO_OUT_LOW) /* 1.5/3.0 C0 current limit selection */ -GPIO(EN_USB_C1_5V_OUT, PIN(7, 0), GPIO_OUT_LOW) /* C1 5V Enable */ -GPIO(EN_USB_C1_CHARGE_L, PIN(0, 4), GPIO_OUT_LOW) /* alt fn */ -GPIO(EN_USB_C1_3A, PIN(8, 3), GPIO_OUT_LOW) /* alt fn 1.5/3.0 C1 current limit selection */ - -GPIO(USB2_VBUSSENSE, PIN(A, 2), GPIO_OUT_LOW) /* USB OTG ID */ -GPIO(USB2_ID, PIN(A, 0), GPIO_OUT_LOW) /* USB OTG VBUS Sense */ - -GPIO(USB_PD_RST_L, PIN(F, 1), GPIO_OUT_LOW) /* C0,C1 PD Reset */ - -/* misc section */ -GPIO(CCD_MODE_ODL, PIN(E, 3), GPIO_INPUT) /* Case Closed Debug Mode */ -GPIO(EC_BATT_PRES_L, PIN(E, 5), GPIO_INPUT) /* Battery Present */ -GPIO(EC_ENTERING_RW, PIN(E, 1), GPIO_OUTPUT) /* EC Entering RW */ -GPIO(EC_BL_DISABLE_L, PIN(D, 3), GPIO_INPUT) /* Enable Backlight */ -GPIO(EC_BRD_ID1, PIN(9, 6), GPIO_INPUT) /* Board ID bit0 */ -GPIO(EC_BRD_ID2, PIN(9, 3), GPIO_INPUT) /* Board ID bit1 */ -GPIO(EC_BRD_ID3, PIN(F, 0), GPIO_INPUT) /* Board ID bit2 */ -GPIO(KBD_BL_EN, PIN(7, 5), GPIO_OUT_LOW) /* KB backlight enable */ -GPIO(EC_PLATFORM_RST, PIN(8, 6), GPIO_OUT_LOW) /* EC Reset to LDO_EN */ - -/* I2C pins - these will be reconfigured for alternate function below */ - -GPIO(EC_I2C1_USB_C0_SCL, PIN(9, 0), GPIO_INPUT) /* alt fn I2C1_SCL */ -GPIO(EC_I2C1_USB_C0_SDA, PIN(8, 7), GPIO_INPUT) /* alt fn I2C1_SDA */ -GPIO(EC_I2C2_USB_C1_SCL, PIN(9, 2), GPIO_INPUT) /* alt fn I2C2_SCL */ -GPIO(EC_I2C2_USB_C1_SDA, PIN(9, 1), GPIO_INPUT) /* alt fn I2C2_SDA */ -GPIO(EC_I2C5_GYRO_SCL, PIN(3, 3), GPIO_INPUT) /* alt fn I2C5_SCL */ -GPIO(EC_I2C5_GYRO_SDA, PIN(3, 6), GPIO_INPUT) /* alt fn I2C5_SDA */ -GPIO(EC_I2C3_SENSOR_3V3_SCL, PIN(D, 1), GPIO_INPUT) /* alt fn I2C3_SCL */ -GPIO(EC_I2C3_SENSOR_3V3_SDA, PIN(D, 0), GPIO_INPUT) /* alt fn I2C3_SDA */ -GPIO(EC_I2C0_POWER_SCL, PIN(B, 5), GPIO_INPUT) /* alt fn I2C0_SCL */ -GPIO(EC_I2C0_POWER_SDA, PIN(B, 4), GPIO_INPUT) /* alt fn I2C0_SDA */ -GPIO(EC_I2C4_BATTERY_SCL, PIN(F, 3), GPIO_INPUT) /* alt fn I2C4_SCL */ -GPIO(EC_I2C4_BATTERY_SDA, PIN(F, 2), GPIO_INPUT) /* alt fn I2C4_SDA */ - -/* Not connected */ -GPIO(NC_GPIO32, PIN(3, 2), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO35, PIN(3, 5), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO40, PIN(4, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO44, PIN(4, 4), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO45, PIN(4, 5), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO50, PIN(5, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO56, PIN(5, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO57, PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO63, PIN(6, 3), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO66, PIN(6, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO82, PIN(8, 2), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO95, PIN(9, 5), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOB1, PIN(B, 1), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOB2, PIN(B, 2), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOB3, PIN(B, 3), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOB6, PIN(B, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOC7, PIN(C, 7), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOD6, PIN(D, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOD7, PIN(D, 7), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOE0, PIN(E, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(ACCELGYRO3_INT_L, PIN(4, 1), GPIO_INPUT | GPIO_PULL_UP) - -/* WoV is unused */ -GPIO(NC_GPIO94, PIN(9, 4), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIO97, PIN(9, 7), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOA5, PIN(A, 5), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOA7, PIN(A, 7), GPIO_INPUT | GPIO_PULL_UP) -GPIO(NC_GPIOB0, PIN(B, 0), GPIO_INPUT | GPIO_PULL_UP) - -/* Power Switch Logic (PSL) inputs */ -ALTERNATE(PIN_MASK(0, 0x03), 0, MODULE_PMU, 0) /* PSL3&GPI01, PSL2&GPI00 */ -ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0) /* GPIOD2 */ - -/* gpio alternate functions */ -ALTERNATE(PIN_MASK(0, 0x18), 0, MODULE_GPIO, 0) /* GPIO03,4 */ - -ALTERNATE(PIN_MASK(8, 0x08), 0, MODULE_GPIO, 0) /* GPIO83 */ - -/* GPIOA3,1 are enabled by default even though they are ALT functions */ - -/* PWM channels */ -ALTERNATE(PIN_MASK(6, 0x01), 0, MODULE_PWM, 0) /* GPIO60 PWM7 CHARGE_LED5 */ -ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* GPIO80 PWM3 KBD_BL_PWM */ -ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* GPIOB7 PWM5 CHARGE_LED6 */ -ALTERNATE(PIN_MASK(C, 0x1d), 0, MODULE_PWM, 0) /* GPIOC4,3,2,0 PWM2,0,1,6 CHARGE_LED2,1,4,3 */ - -/* I2C alternate functions */ -ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0) /* I2C0_SCL0|I2C0_SDA0 */ -ALTERNATE(PIN_MASK(9, 0x01), 0, MODULE_I2C, 0) /* I2C1_SCL0 */ -ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1_SDA0 */ -ALTERNATE(PIN_MASK(9, 0x06), 0, MODULE_I2C, 0) /* I2C2_SCL0|I2C2_SDA0 */ -ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* I2C3_SCL0|I2C3_SDA0 */ -ALTERNATE(PIN_MASK(F, 0x0c), 0, MODULE_I2C, 0) /* I2C4_SCL1|I2C4_SDA1 */ -ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* I2C5_SDA0|I2C5_SCL0 */ - -/* ADC alternate functions */ -ALTERNATE(PIN_MASK(4, 0x0c), 0, MODULE_ADC, 0) /* ADC2-3 */ - -/* UART alternate functions */ -ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART from EC to Servo */ - -/* keyboard */ -#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP) -#define GPIO_KB_OUTPUT (GPIO_ODR_HIGH) -#define GPIO_KB_OUTPUT_COL2 (GPIO_OUT_LOW) - -/* keyboard alternate functions */ -ALTERNATE(PIN_MASK(0, 0xe0), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) -ALTERNATE(PIN_MASK(1, 0x7f), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) -ALTERNATE(PIN_MASK(2, 0xfc), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) -GPIO(EC_KB_ROW02_INV, PIN(1, 7), GPIO_KB_OUTPUT_COL2) |