ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 553 deletions

diff --git a/board/blipper/board.c b/board/blipper/board.c
deleted file mode 100644
index 2ca56a1b51..0000000000
--- a/board/blipper/board.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Blipper board-specific configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "cbi_fw_config.h"
-#include "cros_board_info.h"
-#include "cbi_ssfc.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "driver/accel_lis2dw12.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "driver/tcpm/raa489000.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/usb_mux/it5205.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "intc.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "tcpm/tcpci.h"
-#include "temp_sensor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define INT_RECHECK_US 5000
-
-__override struct keyboard_scan_config keyscan_config = {
-	.output_settle_us = 80,
-	.debounce_down_us = 30 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-	.actual_key_mask = {
-		0x1c, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
-	},
-};
-
-/* C0 interrupt line shared by BC 1.2 and charger */
-static void check_c0_line(void);
-DECLARE_DEFERRED(check_c0_line);
-
-static void hdmi_hpd_interrupt(enum gpio_signal s)
-{
-	gpio_set_level(GPIO_USB_C1_DP_HPD, !gpio_get_level(s));
-}
-
-static void notify_c0_chips(void)
-{
-	/*
-	 * The interrupt line is shared between the TCPC and BC 1.2 detection
-	 * chip.  Therefore we'll need to check both ICs.
-	 */
-	schedule_deferred_pd_interrupt(0);
-	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-static void check_c0_line(void)
-{
-	/*
-	 * If line is still being held low, see if there's more to process from
-	 * one of the chips
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		notify_c0_chips();
-		hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-	}
-}
-
-static void usb_c0_interrupt(enum gpio_signal s)
-{
-	/* Cancel any previous calls to check the interrupt line */
-	hook_call_deferred(&check_c0_line_data, -1);
-
-	/* Notify all chips using this line that an interrupt came in */
-	notify_c0_chips();
-
-	/* Check the line again in 5ms */
-	hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-
-}
-
-static void c0_ccsbu_ovp_interrupt(enum gpio_signal s)
-{
-	cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event");
-	pd_handle_cc_overvoltage(0);
-}
-
-/* Must come after other header files and interrupt handler declarations */
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_VSNS_PP3300_A] = {
-		.name = "PP3300_A_PGOOD",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH0
-	},
-	[ADC_TEMP_SENSOR_1] = {
-		.name = "TEMP_SENSOR1",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH2
-	},
-	[ADC_TEMP_SENSOR_2] = {
-		.name = "TEMP_SENSOR2",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH3
-	},
-	[ADC_TEMP_SENSOR_3] = {
-		.name = "TEMP_SENSOR3",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH15
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* BC 1.2 chips */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-		.flags = PI3USB9201_ALWAYS_POWERED,
-	},
-};
-
-/* Charger chips */
-const struct charger_config_t chg_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
-		.drv = &isl923x_drv,
-	},
-};
-
-/* TCPCs */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0,
-			.addr_flags = RAA489000_TCPC0_I2C_FLAGS,
-		},
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-		.drv = &raa489000_tcpm_drv,
-	},
-};
-
-/* USB Muxes */
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS,
-		.driver = &it5205_usb_mux_driver,
-	},
-};
-
-static const struct ec_response_keybd_config blipper_keybd = {
-	.num_top_row_keys = 10,
-	.action_keys = {
-		TK_BACK,		/* T1 */
-		TK_REFRESH,		/* T2 */
-		TK_FULLSCREEN,		/* T3 */
-		TK_OVERVIEW,		/* T4 */
-		TK_SNAPSHOT,		/* T5 */
-		TK_BRIGHTNESS_DOWN,	/* T6 */
-		TK_BRIGHTNESS_UP,	/* T7 */
-		TK_VOL_MUTE,		/* T8 */
-		TK_VOL_DOWN,		/* T9 */
-		TK_VOL_UP,		/* T10 */
-	},
-	.capabilities = KEYBD_CAP_SCRNLOCK_KEY | KEYBD_CAP_NUMERIC_KEYPAD,
-};
-
-__override const struct ec_response_keybd_config
-*board_vivaldi_keybd_config(void)
-{
-		return &blipper_keybd;
-}
-
-/* USB-A charging control */
-const int usb_port_enable[USB_PORT_COUNT] = {
-	GPIO_EN_USB_A0_VBUS
-};
-
-static uint32_t board_id;
-
-/* Sensors */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* Matrices to rotate accelerometers into the standard reference. */
-static const mat33_fp_t lid_lis2dwl_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;
-
-/* Lid accel private data */
-static struct stprivate_data g_lis2dwl_data;
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LIS2DWL,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &lis2dw12_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_lis2dwl_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LIS2DWL_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_lis2dwl_ref,
-		.default_range = 2, /* g */
-		.min_frequency = LIS2DW12_ODR_MIN_VAL,
-		.max_frequency = LIS2DW12_ODR_MAX_VAL,
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 12500 | ROUND_UP_FLAG,
-			},
-			/* Sensor on for lid angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DS3,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-				MOTIONSENSE_TYPE_ACCEL),
-		.int_signal = GPIO_BASE_SIXAXIS_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.rot_standard_ref = NULL,		/* identity matrix */
-		.default_range = 4,  /* g */
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DS3,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-				MOTIONSENSE_TYPE_GYRO),
-		.int_signal = GPIO_BASE_SIXAXIS_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-		.rot_standard_ref = NULL,               /* identity matrix */
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	},
-};
-
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-void board_init(void)
-{
-	gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C0_CCSBU_OVP_ODL);
-
-	gpio_enable_interrupt(GPIO_HDMI_HPD_SUB_ODL);
-
-	/* Set LEDs luminance */
-	pwm_set_duty(PWM_CH_LED_RED, 70);
-	pwm_set_duty(PWM_CH_LED_GREEN, 70);
-	pwm_set_duty(PWM_CH_LED_WHITE, 70);
-
-	/* Enable Base Accel interrupt for Beetley */
-	if (get_cbi_fw_config_tablet_mode() == TABLET_MODE_PRESENT)
-		gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-
-	/*
-	 * If interrupt lines are already low, schedule them to be processed
-	 * after inits are completed.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL))
-		hook_call_deferred(&check_c0_line_data, 0);
-
-	/* Setting scan mask KSO11, KSO12, KSO13 and KSO14 */
-	keyscan_config.actual_key_mask[11] = 0xfe;
-	keyscan_config.actual_key_mask[12] = 0xff;
-	keyscan_config.actual_key_mask[13] = 0xff;
-	keyscan_config.actual_key_mask[14] = 0xff;
-
-	cbi_get_board_version(&board_id);
-
-	if (get_cbi_fw_config_tablet_mode() == TABLET_MODE_ABSENT) {
-		motion_sensor_count = 0;
-		gmr_tablet_switch_disable();
-		/*
-		 * Base accel is not stuffed, don't allow
-		 * line to float.
-		 */
-		gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L,
-				GPIO_INPUT | GPIO_PULL_DOWN);
-
-		gpio_set_flags(GPIO_VOLDN_BTN_ODL,
-				GPIO_INPUT | GPIO_PULL_DOWN);
-
-		gpio_set_flags(GPIO_VOLUP_BTN_ODL,
-				GPIO_INPUT | GPIO_PULL_DOWN);
-
-	}
-
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_hibernate(void)
-{
-	/*
-	 * Charger IC need to be put into their "low power mode" before
-	 * entering the Z-state.
-	 *
-	 * b:186717219: In order to solve the power consumption problem of
-	 * hibernate，HW solution is adopted after board id 3 to solve the
-	 * problem that AC cannot wake up hibernate mode.
-	 */
-	if (board_id > 2)
-		raa489000_hibernate(0, true);
-	else
-		raa489000_hibernate(0, false);
-}
-
-__override void board_pulse_entering_rw(void)
-{
-	/*
-	 * On the ITE variants, the EC_ENTERING_RW signal was connected to a pin
-	 * which is active high by default.  This causes Cr50 to think that the
-	 * EC has jumped to its RW image even though this may not be the case.
-	 * The pin is changed to GPIO_EC_ENTERING_RW2.
-	 */
-	gpio_set_level(GPIO_EC_ENTERING_RW, 1);
-	gpio_set_level(GPIO_EC_ENTERING_RW2, 1);
-	usleep(MSEC);
-	gpio_set_level(GPIO_EC_ENTERING_RW, 0);
-	gpio_set_level(GPIO_EC_ENTERING_RW2, 0);
-}
-
-void board_reset_pd_mcu(void)
-{
-	/*
-	 * Nothing to do.  TCPC C0 is internal, TCPC C1 reset pin is not
-	 * connected to the EC.
-	 */
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-	int regval;
-
-	/*
-	 * The interrupt line is shared between the TCPC and BC1.2 detector IC.
-	 * Therefore, go out and actually read the alert registers to report the
-	 * alert status.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		if (!tcpc_read16(0, TCPC_REG_ALERT, &regval)) {
-			/* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */
-			if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0))
-				regval &= ~((1 << 14) | (1 << 13) | (1 << 12));
-
-			if (regval)
-				status |= PD_STATUS_TCPC_ALERT_0;
-		}
-	}
-
-	return status;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma,
-			    int charge_mv)
-{
-	int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
-	/*
-	 * b/147463641: The charger IC seems to overdraw ~4%, therefore we
-	 * reduce our target accordingly.
-	 */
-	icl = icl * 96 / 100;
-	charge_set_input_current_limit(icl, charge_mv);
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
-	if (port < 0 || port > board_get_usb_pd_port_count())
-		return;
-
-	raa489000_set_output_current(port, rp);
-}
-
-int board_is_sourcing_vbus(int port)
-{
-	int regval;
-
-	tcpc_read(port, TCPC_REG_POWER_STATUS, &regval);
-	return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS);
-
-}
-
-int board_set_active_charge_port(int port)
-{
-	if (port != 0 && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	CPRINTUSB("New chg p%d", port);
-
-	/* Disable all ports. */
-	if (port == CHARGE_PORT_NONE) {
-		tcpc_write(0, TCPC_REG_COMMAND,
-				TCPC_REG_COMMAND_SNK_CTRL_LOW);
-		raa489000_enable_asgate(0, false);
-		return EC_SUCCESS;
-	}
-
-	/* Check if port is sourcing VBUS. */
-	if (board_is_sourcing_vbus(port)) {
-		CPRINTUSB("Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-	/* Enable requested charge port. */
-	if (raa489000_enable_asgate(port, true) ||
-	    tcpc_write(0, TCPC_REG_COMMAND,
-		       TCPC_REG_COMMAND_SNK_CTRL_HIGH)) {
-		CPRINTUSB("p%d: sink path enable failed.", port);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	return EC_SUCCESS;
-}
-
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_LED_RED] = {
-		.channel = 1,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 2400,
-	},
-
-	[PWM_CH_LED_GREEN] = {
-		.channel = 2,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 2400,
-	},
-
-	[PWM_CH_LED_WHITE] = {
-		.channel = 3,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 2400,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/* Thermistors */
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_1] = {.name = "Charge",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_1},
-	[TEMP_SENSOR_2] = {.name = "Ambient",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_2},
-	[TEMP_SENSOR_3] = {.name = "5V_Inductor",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_3},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/* This callback disables keyboard when convertibles are fully open */
-__override void lid_angle_peripheral_enable(int enable)
-{
-	int chipset_in_s0 = chipset_in_state(CHIPSET_STATE_ON);
-
-	/*
-	 * If the lid is in tablet position via other sensors,
-	 * ignore the lid angle, which might be faulty then
-	 * disable keyboard.
-	 */
-	if (tablet_get_mode())
-		enable = 0;
-
-	if (enable) {
-		keyboard_scan_enable(1, KB_SCAN_DISABLE_LID_ANGLE);
-	} else {
-		/*
-		 * Ensure that the chipset is off before disabling the keyboard.
-		 * When the chipset is on, the EC keeps the keyboard enabled and
-		 * the AP decides whether to ignore input devices or not.
-		 */
-		if (!chipset_in_s0)
-			keyboard_scan_enable(0, KB_SCAN_DISABLE_LID_ANGLE);
-	}
-}