ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

9 files changed, 0 insertions, 1446 deletions

diff --git a/board/boldar/battery.c b/board/boldar/battery.c
deleted file mode 100644
index 48f7fcda84..0000000000
--- a/board/boldar/battery.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all Volteer battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* LGC\011 L17L3PB0 Battery Information */
-	/*
-	 * Battery info provided by ODM on b/143477210, comment #11
-	 */
-	[BATTERY_LGC011] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x10, 0x10 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x6000,
-				.disconnect_val = 0x6000,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= TARGET_WITH_MARGIN(13200, 5),
-			.voltage_normal		= 11550, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 45,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 75,
-		},
-	},
-	/* LGC AP18C8K Battery Information */
-	[BATTERY_LGC_AP18C8K] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC KT0030G020",
-			.device_name = "AP18C8K",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x43,
-				.reg_mask = 0x0001,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max		= 13050,
-			.voltage_normal		= 11250,
-			.voltage_min		= 9000,
-			.precharge_current	= 256,
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 75,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC011;
diff --git a/board/boldar/board.c b/board/boldar/board.c
deleted file mode 100644
index 49a3a79831..0000000000
--- a/board/boldar/board.c
+++ /dev/null
@@ -1,588 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer board-specific configuration */
-#include "button.h"
-#include "common.h"
-#include "accelgyro.h"
-#include "cbi_ec_fw_config.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi260.h"
-#include "driver/als_tcs3400.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/ppc/syv682x.h"
-#include "driver/retimer/bb_retimer_public.h"
-#include "driver/sync.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/rt1715.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/tcpm/tusb422.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "tablet_mode.h"
-#include "throttle_ap.h"
-#include "uart.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tbt.h"
-#include "usb_pd_tcpm.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
-
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
-	/* Increase from 50 us, because KSO_02 passes through the H1. */
-	.output_settle_us = 80,
-	/* Other values should be the same as the default configuration. */
-	.debounce_down_us = 9 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-	.actual_key_mask = {
-		0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
-	},
-};
-
-/******************************************************************************/
-/*
- * FW_CONFIG defaults for Volteer if the CBI data is not initialized.
- */
-union volteer_cbi_fw_config fw_config_defaults = {
-	.usb_db = DB_USB4_GEN2,
-};
-
-static void board_init(void)
-{
-	/* Illuminate motherboard and daughter board LEDs equally to start. */
-	pwm_enable(PWM_CH_LED4_SIDESEL, 1);
-	pwm_set_duty(PWM_CH_LED4_SIDESEL, 50);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-
-const struct fan_conf fan_conf_0 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = MFT_CH_0,	/* Use MFT id to control fan */
-	.pgood_gpio = -1,
-	.enable_gpio = GPIO_EN_PP5000_FAN,
-};
-
-/* Default */
-const struct fan_rpm fan_rpm_0 = {
-	.rpm_min = 3000,
-	.rpm_start = 3000,
-	.rpm_max = 10000,
-};
-
-const struct fan_t fans[FAN_CH_COUNT] = {
-	[FAN_CH_0] = {
-		.conf = &fan_conf_0,
-		.rpm = &fan_rpm_0,
-	},
-};
-
-/******************************************************************************/
-/* EC thermal management configuration */
-
-const static struct ec_thermal_config thermal_cpu = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-	},
-	.temp_fan_off = C_TO_K(15),
-	.temp_fan_max = C_TO_K(50),
-};
-
-/*
- * Inductor limits - used for both charger and PP3300 regulator
- *
- * Need to use the lower of the charger IC, PP3300 regulator, and the inductors
- */
-const static struct ec_thermal_config thermal_inductor = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-	},
-	.temp_fan_off = C_TO_K(15),
-	.temp_fan_max = C_TO_K(55),
-};
-
-
-struct ec_thermal_config thermal_params[] = {
-	[TEMP_SENSOR_1_CHARGER]			= thermal_inductor,
-	[TEMP_SENSOR_2_PP3300_REGULATOR]	= thermal_inductor,
-	[TEMP_SENSOR_3_DDR_SOC]			= thermal_cpu,
-	[TEMP_SENSOR_4_FAN]			= thermal_cpu,
-};
-BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
-	[MFT_CH_0] = {
-		.module = NPCX_MFT_MODULE_1,
-		.clk_src = TCKC_LFCLK,
-		.pwm_id = PWM_CH_FAN,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/******************************************************************************/
-/* I2C port map configuration */
-const struct i2c_port_t i2c_ports[] = {
-	{
-		.name = "sensor",
-		.port = I2C_PORT_SENSOR,
-		.kbps = 400,
-		.scl = GPIO_EC_I2C0_SENSOR_SCL,
-		.sda = GPIO_EC_I2C0_SENSOR_SDA,
-	},
-	{
-		.name = "usb_c0",
-		.port = I2C_PORT_USB_C0,
-		.kbps = 1000,
-		.scl = GPIO_EC_I2C1_USB_C0_SCL,
-		.sda = GPIO_EC_I2C1_USB_C0_SDA,
-	},
-	{
-		.name = "usb_c1",
-		.port = I2C_PORT_USB_C1,
-		.kbps = 1000,
-		.scl = GPIO_EC_I2C2_USB_C1_SCL,
-		.sda = GPIO_EC_I2C2_USB_C1_SDA,
-	},
-	{
-		.name = "usb_1_mix",
-		.port = I2C_PORT_USB_1_MIX,
-		.kbps = 100,
-		.scl = GPIO_EC_I2C3_USB_1_MIX_SCL,
-		.sda = GPIO_EC_I2C3_USB_1_MIX_SDA,
-	},
-	{
-		.name = "power",
-		.port = I2C_PORT_POWER,
-		.kbps = 100,
-		.scl = GPIO_EC_I2C5_BATTERY_SCL,
-		.sda = GPIO_EC_I2C5_BATTERY_SDA,
-	},
-	{
-		.name = "eeprom",
-		.port = I2C_PORT_EEPROM,
-		.kbps = 400,
-		.scl = GPIO_EC_I2C7_EEPROM_PWR_SCL_R,
-		.sda = GPIO_EC_I2C7_EEPROM_PWR_SDA_R,
-	},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/******************************************************************************/
-/* PWM configuration */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_LED1_BLUE] = {
-		.channel = 2,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		.freq = 4800,
-	},
-	[PWM_CH_LED2_GREEN] = {
-		.channel = 0,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		.freq = 4800,
-	},
-	[PWM_CH_LED3_RED] = {
-		.channel = 1,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		.freq = 4800,
-	},
-	[PWM_CH_LED4_SIDESEL] = {
-		.channel = 7,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		/*
-		 * If using the side select to run both LEDs at the same time,
-		 * the frequency should be 1/2 of the color channel PWM
-		 * frequency to drive each LED equally.
-		 */
-		.freq = 2400,
-	},
-	[PWM_CH_FAN] = {
-		.channel = 5,
-		.flags = PWM_CONFIG_OPEN_DRAIN,
-		.freq = 25000
-	},
-	[PWM_CH_KBLIGHT] = {
-		.channel = 3,
-		.flags = 0,
-		/*
-		 * Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent
-		 * flicker. Higher frequencies consume similar average power to
-		 * lower PWM frequencies, but higher frequencies record a much
-		 * lower maximum power.
-		 */
-		.freq = 2400,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/******************************************************************************/
-/* Volteer specific USB daughter-board configuration */
-
-/* USBC TCPC configuration for USB3 daughter board */
-static const struct tcpc_config_t tcpc_config_p1_usb3 = {
-	.bus_type = EC_BUS_TYPE_I2C,
-	.i2c_info = {
-		.port = I2C_PORT_USB_C1,
-		.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-	},
-	.flags = TCPC_FLAGS_TCPCI_REV2_0 | TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V,
-	.drv = &ps8xxx_tcpm_drv,
-};
-
-/*
- * USB3 DB mux configuration - the top level mux still needs to be set to the
- * virtual_usb_mux_driver so the AP gets notified of mux changes and updates
- * the TCSS configuration on state changes.
- */
-static const struct usb_mux usbc1_usb3_db_retimer = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &tcpci_tcpm_usb_mux_driver,
-	.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	.next_mux = NULL,
-};
-
-static const struct usb_mux mux_config_p1_usb3_active = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-	.next_mux = &usbc1_usb3_db_retimer,
-};
-
-static const struct usb_mux mux_config_p1_usb3_passive = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-};
-
-/******************************************************************************/
-/* USB-A charging control */
-
-const int usb_port_enable[USB_PORT_COUNT] = {
-	GPIO_EN_PP5000_USBA,
-};
-
-static void ps8815_reset(void)
-{
-	int val;
-
-	gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 0);
-	msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS,
-			   PS8815_PWR_H_RST_H_DELAY_MS));
-	gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 1);
-	msleep(PS8815_FW_INIT_DELAY_MS);
-
-	/*
-	 * b/144397088
-	 * ps8815 firmware 0x01 needs special configuration
-	 */
-
-	CPRINTS("%s: patching ps8815 registers", __func__);
-
-	if (i2c_read8(I2C_PORT_USB_C1,
-		      PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f was %02x", val);
-
-	if (i2c_write8(I2C_PORT_USB_C1,
-		       PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, 0x31) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f set to 0x31");
-
-	if (i2c_read8(I2C_PORT_USB_C1,
-		      PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f now %02x", val);
-}
-
-void board_reset_pd_mcu(void)
-{
-	enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type();
-
-	/* No reset available for TCPC on port 0 */
-	/* Daughterboard specific reset for port 1 */
-	if (usb_db == DB_USB3_ACTIVE) {
-		ps8815_reset();
-		usb_mux_hpd_update(USBC_PORT_C1, USB_PD_MUX_HPD_LVL_DEASSERTED |
-						 USB_PD_MUX_HPD_IRQ_DEASSERTED);
-	}
-}
-
-/*
- * Set up support for the USB3 daughterboard:
- *   Parade PS8815 TCPC (integrated retimer)
- *   Diodes PI3USB9201 BC 1.2 chip (same as USB4 board)
- *   Silergy SYV682A PPC (same as USB4 board)
- *   Virtual mux with stacked retimer
- */
-static void config_db_usb3_active(void)
-{
-	tcpc_config[USBC_PORT_C1] = tcpc_config_p1_usb3;
-	usb_muxes[USBC_PORT_C1] = mux_config_p1_usb3_active;
-}
-
-/*
- * Set up support for the passive USB3 daughterboard:
- *   TUSB422 TCPC (already the default)
- *   PI3USB9201 BC 1.2 chip (already the default)
- *   Silergy SYV682A PPC (already the default)
- *   Virtual mux without stacked retimer
- */
-
-static void config_db_usb3_passive(void)
-{
-	usb_muxes[USBC_PORT_C1] = mux_config_p1_usb3_passive;
-}
-
-static void config_port_discrete_tcpc(int port)
-{
-	/*
-	 * Support 2 Pin-to-Pin compatible parts: TUSB422 and RT1715, for
-	 * simplicity allow either and decide at runtime which we are using.
-	 * Default to TUSB422, and switch to RT1715 if it is on the I2C bus and
-	 * the VID matches.
-	 */
-
-	int regval;
-
-	if (i2c_read16(port ? I2C_PORT_USB_C1 : I2C_PORT_USB_C0,
-		       RT1715_I2C_ADDR_FLAGS, TCPC_REG_VENDOR_ID,
-		       &regval) == EC_SUCCESS) {
-		if (regval == RT1715_VENDOR_ID) {
-			CPRINTS("C%d: RT1715 detected", port);
-			tcpc_config[port].i2c_info.addr_flags =
-				RT1715_I2C_ADDR_FLAGS;
-			tcpc_config[port].drv = &rt1715_tcpm_drv;
-			return;
-		}
-	}
-	CPRINTS("C%d: Default to TUSB422", port);
-}
-
-static const char *db_type_prefix = "USB DB type: ";
-__override void board_cbi_init(void)
-{
-	enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type();
-
-	config_port_discrete_tcpc(0);
-	switch (usb_db) {
-	case DB_USB_ABSENT:
-		CPRINTS("%sNone", db_type_prefix);
-		break;
-	case DB_USB4_GEN2:
-		config_port_discrete_tcpc(1);
-		CPRINTS("%sUSB4 Gen1/2", db_type_prefix);
-		break;
-	case DB_USB4_GEN3:
-		config_port_discrete_tcpc(1);
-		CPRINTS("%sUSB4 Gen3", db_type_prefix);
-		break;
-	case DB_USB3_ACTIVE:
-		config_db_usb3_active();
-		CPRINTS("%sUSB3 Active", db_type_prefix);
-		break;
-	case DB_USB3_PASSIVE:
-		config_db_usb3_passive();
-		config_port_discrete_tcpc(1);
-		CPRINTS("%sUSB3 Passive", db_type_prefix);
-		break;
-	default:
-		CPRINTS("%sID %d not supported", db_type_prefix, usb_db);
-	}
-
-	if ((!IS_ENABLED(TEST_BUILD) && !ec_cfg_has_numeric_pad()) ||
-	    get_board_id() <= 2)
-		keyboard_raw_set_cols(KEYBOARD_COLS_NO_KEYPAD);
-}
-
-/******************************************************************************/
-/* USBC PPC configuration */
-struct ppc_config_t ppc_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
-		.drv = &sn5s330_drv,
-	},
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_USB_C1,
-		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
-		.drv = &syv682x_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
-unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
-
-/******************************************************************************/
-/* PPC support routines */
-void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_INT_ODL:
-		sn5s330_interrupt(USBC_PORT_C0);
-		break;
-	case GPIO_USB_C1_PPC_INT_ODL:
-		syv682x_interrupt(USBC_PORT_C1);
-	default:
-		break;
-	}
-}
-
-/******************************************************************************/
-/* BC1.2 charger detect configuration */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_USB_C1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);
-
-/******************************************************************************/
-/* USBC TCPC configuration */
-struct tcpc_config_t tcpc_config[] = {
-	[USBC_PORT_C0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0,
-			.addr_flags = TUSB422_I2C_ADDR_FLAGS,
-		},
-		.drv = &tusb422_tcpm_drv,
-	},
-	[USBC_PORT_C1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C1,
-			.addr_flags = TUSB422_I2C_ADDR_FLAGS,
-		},
-		.drv = &tusb422_tcpm_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
-BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);
-
-/******************************************************************************/
-/* USBC mux configuration - Tiger Lake includes internal mux */
-struct usb_mux usbc0_tcss_usb_mux = {
-	.usb_port = USBC_PORT_C0,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-};
-struct usb_mux usbc1_tcss_usb_mux = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-};
-
-struct usb_mux usb_muxes[] = {
-	[USBC_PORT_C0] = {
-		.usb_port = USBC_PORT_C0,
-		.next_mux = &usbc0_tcss_usb_mux,
-		.driver = &bb_usb_retimer,
-		.hpd_update = bb_retimer_hpd_update,
-		.i2c_port = I2C_PORT_USB_1_MIX,
-		.i2c_addr_flags = USBC_PORT_C0_BB_RETIMER_I2C_ADDR,
-	},
-	[USBC_PORT_C1] = {
-		.usb_port = USBC_PORT_C1,
-		.next_mux = &usbc1_tcss_usb_mux,
-		.driver = &bb_usb_retimer,
-		.hpd_update = bb_retimer_hpd_update,
-		.i2c_port = I2C_PORT_USB_1_MIX,
-		.i2c_addr_flags = USBC_PORT_C1_BB_RETIMER_I2C_ADDR,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
-
-struct bb_usb_control bb_controls[] = {
-	[USBC_PORT_C0] = {
-		.usb_ls_en_gpio = GPIO_USB_C0_LS_EN,
-		.retimer_rst_gpio = GPIO_USB_C0_RT_RST_ODL,
-	},
-	[USBC_PORT_C1] = {
-		.usb_ls_en_gpio = GPIO_USB_C1_LS_EN,
-		.retimer_rst_gpio = GPIO_USB_C1_RT_RST_ODL,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(bb_controls) == USBC_PORT_COUNT);
-
-static void board_tcpc_init(void)
-{
-	/* Don't reset TCPCs after initial reset */
-	if (!system_jumped_late())
-		board_reset_pd_mcu();
-
-	/* Enable PPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);
-
-	/* Enable TCPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);
-
-	/* Enable BC1.2 interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
-}
-DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_CHIPSET);
-
-/******************************************************************************/
-/* TCPC support routines */
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	/*
-	 * Check which port has the ALERT line set
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL))
-		status |= PD_STATUS_TCPC_ALERT_0;
-	if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL))
-		status |= PD_STATUS_TCPC_ALERT_1;
-
-	return status;
-}
-
-int ppc_get_alert_status(int port)
-{
-	if (port == USBC_PORT_C0)
-		return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0;
-	else
-		return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0;
-}
diff --git a/board/boldar/board.h b/board/boldar/board.h
deleted file mode 100644
index 96289e71b7..0000000000
--- a/board/boldar/board.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Baseboard features */
-#include "baseboard.h"
-
-/* Optional features */
-
-/*
- * The RAM and flash size combination on the the NPCX797FC does not leave
- * any unused flash space that can be used to store the .init_rom section.
- */
-#undef CONFIG_CHIP_INIT_ROM_REGION
-
-#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands while in dev. */
-
-#define CONFIG_VBOOT_EFS2
-
-#define CONFIG_POWER_BUTTON
-
-#define CONFIG_HOSTCMD_ESPI_RESET_SLP_SX_VW_ON_ESPI_RST
-
-#undef CONFIG_UART_TX_BUF_SIZE
-#define CONFIG_UART_TX_BUF_SIZE 4096
-
-/* Chipset features */
-#define CONFIG_POWER_PP5000_CONTROL
-
-/* LED defines */
-#define CONFIG_LED_PWM
-/* Although there are 2 LEDs, they are both controlled by the same lines. */
-#define CONFIG_LED_PWM_COUNT 1
-
-/* Keyboard features */
-
-/* Sensors */
-/* LIS2DH12 Lid accel */
-#define CONFIG_ACCEL_LIS2DH
-
-/* BMI260 accel/gyro in base */
-#define CONFIG_ACCELGYRO_BMI260
-#define CONFIG_ACCELGYRO_BMI260_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-/* TCS3400 ALS/RGB */
-#define CONFIG_ALS
-#define ALS_COUNT		1
-#define CONFIG_ALS_TCS3400
-#define CONFIG_ALS_TCS3400_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS)
-
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK \
-	(BIT(LID_ACCEL) | BIT(CLEAR_ALS))
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE		BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID		LID_ACCEL
-
-/* USB Type C and USB PD defines */
-/*
- * USB ID
- * This is allocated specifically for Volteer
- * http://google3/hardware/standards/usb/
- */
-#define CONFIG_USB_PID 0x503E
-
-#define CONFIG_USB_PD_PORT_MAX_COUNT			2
-
-/* TODO: b/144165680 - measure and check these values on Volteer */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY	30000 /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY	30000 /* us */
-
-/*
- * SN5S30 PPC supports up to 24V VBUS source and sink, however passive USB-C
- * cables only support up to 60W.
- */
-#define PD_OPERATING_POWER_MW	15000
-#define PD_MAX_POWER_MW		60000
-#define PD_MAX_CURRENT_MA	3000
-#define PD_MAX_VOLTAGE_MV	20000
-
-/* Enabling Thunderbolt-compatible mode */
-#define CONFIG_USB_PD_TBT_COMPAT_MODE
-
-/* Enabling USB4 mode */
-#define CONFIG_USB_PD_USB4
-#define USBC_PORT_C0_BB_RETIMER_I2C_ADDR	0x37
-#define USBC_PORT_C1_BB_RETIMER_I2C_ADDR	0x40
-
-/* USB Type A Features */
-#define USB_PORT_COUNT			1
-#define CONFIG_USB_PORT_POWER_DUMB
-
-/* USBC PPC*/
-#define CONFIG_USBC_PPC_SN5S330		/* USBC port C0 */
-#define CONFIG_USBC_PPC_SYV682X		/* USBC port C1 */
-
-/* BC 1.2 */
-
-/* Volume Button feature */
-
-/* Fan features */
-
-/* charger defines */
-#define CONFIG_CHARGER_SENSE_RESISTOR		10
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC	10
-
-/*
- * Macros for GPIO signals used in common code that don't match the
- * schematic names. Signal names in gpio.inc match the schematic and are
- * then redefined here to so it's more clear which signal is being used for
- * which purpose.
- */
-#define GPIO_AC_PRESENT			GPIO_ACOK_OD
-#define GPIO_EC_INT_L			GPIO_EC_PCH_INT_ODL
-#define GPIO_EN_PP5000			GPIO_EN_PP5000_A
-#define GPIO_ENTERING_RW		GPIO_EC_ENTERING_RW
-#define GPIO_LID_OPEN			GPIO_EC_LID_OPEN
-#define GPIO_KBD_KSO2			GPIO_EC_KSO_02_INV
-#define GPIO_PACKET_MODE_EN		GPIO_EC_H1_PACKET_MODE
-#define GPIO_PCH_WAKE_L			GPIO_EC_PCH_WAKE_ODL
-#define GPIO_PCH_PWRBTN_L		GPIO_EC_PCH_PWR_BTN_ODL
-#define GPIO_PCH_RSMRST_L		GPIO_EC_PCH_RSMRST_ODL
-#define GPIO_PCH_RTCRST			GPIO_EC_PCH_RTCRST
-#define GPIO_PCH_SLP_S0_L		GPIO_SLP_S0_L
-#define GPIO_PCH_SLP_S3_L		GPIO_SLP_S3_L
-#define GPIO_PCH_DSW_PWROK		GPIO_EC_PCH_DSW_PWROK
-#define GPIO_POWER_BUTTON_L		GPIO_H1_EC_PWR_BTN_ODL
-#define GPIO_RSMRST_L_PGOOD		GPIO_PG_EC_RSMRST_ODL
-#define GPIO_CPU_PROCHOT		GPIO_EC_PROCHOT_ODL
-#define GPIO_SYS_RESET_L		GPIO_SYS_RST_ODL
-#define GPIO_WP_L			GPIO_EC_WP_L
-#define GPIO_USB_C1_BC12_INT_ODL	GPIO_USB_C1_MIX_INT_ODL
-#define GPIO_VOLUME_UP_L		GPIO_EC_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L		GPIO_EC_VOLDN_BTN_ODL
-#define GMR_TABLET_MODE_GPIO_L		GPIO_TABLET_MODE_L
-
-/* I2C Bus Configuration */
-#define CONFIG_I2C
-#define I2C_PORT_ACCEL		I2C_PORT_SENSOR
-#define I2C_PORT_SENSOR		NPCX_I2C_PORT0_0
-#define I2C_PORT_USB_C0		NPCX_I2C_PORT1_0
-#define I2C_PORT_USB_C1		NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_1_MIX	NPCX_I2C_PORT3_0
-#define I2C_PORT_POWER		NPCX_I2C_PORT5_0
-#define I2C_PORT_EEPROM		NPCX_I2C_PORT7_0
-
-#define I2C_PORT_BATTERY	I2C_PORT_POWER
-#define I2C_PORT_CHARGER	I2C_PORT_EEPROM
-
-#define I2C_ADDR_EEPROM_FLAGS	0x50
-#define CONFIG_I2C_CONTROLLER
-
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum battery_type {
-	BATTERY_LGC011,
-	BATTERY_LGC_AP18C8K,
-	BATTERY_TYPE_COUNT,
-};
-
-enum pwm_channel {
-	PWM_CH_LED1_BLUE = 0,
-	PWM_CH_LED2_GREEN,
-	PWM_CH_LED3_RED,
-	PWM_CH_LED4_SIDESEL,
-	PWM_CH_FAN,
-	PWM_CH_KBLIGHT,
-	PWM_CH_COUNT
-};
-
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	CLEAR_ALS,
-	RGB_ALS,
-	SENSOR_COUNT,
-};
-
-enum usbc_port {
-	USBC_PORT_C0 = 0,
-	USBC_PORT_C1,
-	USBC_PORT_COUNT
-};
-
-void board_reset_pd_mcu(void);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/boldar/build.mk b/board/boldar/build.mk
deleted file mode 100644
index 838d6a16ce..0000000000
--- a/board/boldar/build.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-# -*- makefile -*-
-# Copyright 2020 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m7fc
-BASEBOARD:=volteer
-
-board-y=board.o
-board-y+=battery.o
-board-y+=led.o
-board-y+=sensors.o
diff --git a/board/boldar/ec.tasklist b/board/boldar/ec.tasklist
deleted file mode 100644
index 292de51cdb..0000000000
--- a/board/boldar/ec.tasklist
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHG_RAMP, chg_ramp_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE)
diff --git a/board/boldar/gpio.inc b/board/boldar/gpio.inc
deleted file mode 100644
index f41d198df5..0000000000
--- a/board/boldar/gpio.inc
+++ /dev/null
@@ -1,182 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* Wake Source interrupts */
-GPIO_INT(EC_LID_OPEN,          PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt)
-GPIO_INT(EC_WP_L,              PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
-GPIO_INT(H1_EC_PWR_BTN_ODL,    PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)
-GPIO_INT(ACOK_OD,              PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt)
-
-/* Power sequencing interrupts */
-GPIO_INT(SLP_S0_L,             PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt)
-#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3
-GPIO_INT(SLP_S3_L,             PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt)
-#endif
-GPIO_INT(SLP_SUS_L,            PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_EC_RSMRST_ODL,     PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_EC_DSW_PWROK,      PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_EC_ALL_SYS_PWRGD,  PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt)
-
-/* Sensor Interrupts */
-GPIO_INT(EC_IMU_INT_L,         PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi260_interrupt)
-GPIO_INT(EC_ALS_RGB_INT_L,     PIN(D, 4), GPIO_INT_FALLING, tcs3400_interrupt)
-GPIO_INT(TABLET_MODE_L,        PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr)
-/*
- * Lid g-sensor interrupt unused on Volteer, configure as regular input for
- * power saving.
- */
-GPIO(EC_ACCEL_INT,		PIN(8, 1), GPIO_INPUT | GPIO_PULL_UP)
-
-/* USB-C interrupts */
-GPIO_INT(USB_C0_TCPC_INT_ODL,	PIN(E, 0), GPIO_INT_BOTH, tcpc_alert_event)
-GPIO_INT(USB_C1_TCPC_INT_ODL,	PIN(A, 2), GPIO_INT_BOTH, tcpc_alert_event)
-
-GPIO_INT(USB_C0_PPC_INT_ODL,	PIN(6, 2), GPIO_INT_BOTH, ppc_interrupt)
-GPIO_INT(USB_C1_PPC_INT_ODL,	PIN(F, 5), GPIO_INT_BOTH, ppc_interrupt)
-
-GPIO_INT(USB_C0_BC12_INT_ODL,	PIN(E, 4), GPIO_INT_BOTH, bc12_interrupt)
-GPIO_INT(USB_C1_MIX_INT_ODL,	PIN(0, 3), GPIO_INT_BOTH, bc12_interrupt)
-
-/* HDMI interrupts */
-
-/* Volume button interrupts */
-GPIO_INT(EC_VOLDN_BTN_ODL,		PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
-GPIO_INT(EC_VOLUP_BTN_ODL,		PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
-
-/* Power Sequencing Signals */
-GPIO(EN_PP3300_A,              PIN(A, 3), GPIO_OUT_LOW)
-GPIO(EN_PP5000_A,              PIN(A, 4), GPIO_OUT_LOW)
-GPIO(EN_PPVAR_VCCIN,           PIN(4, 3), GPIO_OUT_LOW) /* Enables VCCIN IMPV9 */
-GPIO(EC_PCH_DSW_PWROK,         PIN(C, 0), GPIO_OUT_LOW)
-
-/* Other wake sources */
-/*
- * GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an
- * interrupt handler because it is automatically handled by the PSL.
- *
- * We need to lock the setting so this gpio can't be reconfigured to overdrive
- * the real reset signal. (This is the PSL input pin not the real reset pin).
- */
-GPIO(EC_RST_ODL,		PIN(0, 2), GPIO_INT_BOTH |
-					   GPIO_HIB_WAKE_HIGH |
-					   GPIO_LOCKED)
-
-/* AP/PCH Signals */
-GPIO(EC_PCH_SYS_PWROK,         PIN(3, 7), GPIO_OUT_LOW)
-GPIO(EC_PCH_RSMRST_ODL,        PIN(A, 6), GPIO_ODR_LOW) /* TODO - b/140950085 - implement TGL sequencing requirement */
-GPIO(EC_PCH_PWR_BTN_ODL,       PIN(C, 1), GPIO_ODR_HIGH)
-GPIO(EC_PCH_RTCRST,            PIN(7, 6), GPIO_OUT_LOW)
-GPIO(EC_PCH_WAKE_ODL,          PIN(7, 4), GPIO_ODR_HIGH)
-GPIO(EC_ENTERING_RW,           PIN(E, 3), GPIO_OUT_LOW)
-GPIO(EC_PROCHOT_ODL,           PIN(6, 3), GPIO_ODR_HIGH)
-GPIO_INT(EC_PROCHOT_IN_L,      PIN(F, 0), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt)
-GPIO(SYS_RST_ODL,              PIN(C, 5), GPIO_ODR_HIGH)
-
-GPIO(EC_PCH_INT_ODL,           PIN(B, 0), GPIO_ODR_HIGH)
-
-/* USB and USBC Signals */
-GPIO(EN_PP5000_USBA,		PIN(C, 6), GPIO_OUT_LOW)	/* Enable USB-A charging - all ports */
-GPIO(USB_A_LOW_PWR_OD,		PIN(6, 6), GPIO_ODR_LOW)	/* Don't limit USB-A charging by default - all ports */
-GPIO(USB_C0_RT_RST_ODL,		PIN(4, 1), GPIO_ODR_LOW)	/* RST to Burnside bridge */
-GPIO(USB_C1_RT_RST_ODL,		PIN(8, 3), GPIO_ODR_LOW)
-GPIO(USB_C0_OC_ODL,		PIN(B, 1), GPIO_ODR_HIGH)
-GPIO(USB_C1_OC_ODL,		PIN(5, 0), GPIO_ODR_HIGH)
-/* There is currently no need to service this interrupt. */
-GPIO(USB_C0_RT_INT_ODL,		PIN(F, 2), GPIO_INPUT)
-GPIO(USB_C1_RT_INT_ODL,		PIN(F, 3), GPIO_INPUT)
-
-/* Don't have a load switch for retimer */
-UNIMPLEMENTED(USB_C0_LS_EN)
-UNIMPLEMENTED(USB_C1_LS_EN)
-
-/* Misc Signals */
-GPIO(EC_H1_PACKET_MODE,		PIN(7, 5), GPIO_OUT_LOW)	/* H1 Packet Mode */
-/*
- * Despite their names, M2_SSD_PLN and M2_SSD_PLA are active-low, and M2_SSD_PLN
- * is open-drain.
- * TODO(b/138954381): Change these names when they change on the schematic.
- */
-GPIO(M2_SSD_PLN,		PIN(A, 0), GPIO_ODR_HIGH)	/* SSD power-loss notification */
-GPIO(M2_SSD_PLA,		PIN(7, 0), GPIO_INPUT)		/* SSD power-loss acknowledgment */
-GPIO(CCD_MODE_ODL,		PIN(E, 5), GPIO_INPUT)		/* Case Closed Debug Mode */
-GPIO(EC_SLP_S0IX,		PIN(7, 2), GPIO_INPUT | GPIO_PULL_UP)
-
-GPIO(CATERR_L,			PIN(3, 4), GPIO_INPUT)		/* Catastrophic error */
-GPIO(EC_ESPI_ALERT_L,		PIN(5, 7), GPIO_INPUT | GPIO_SEL_1P8V)
-
-/*
- * eDP backlight - both PCH and EC have enable pins that must be high
- * for the backlight to turn on. Default state is high, and can be turned
- * off during sleep states.
- */
-GPIO(EC_EDP_BL_EN,             PIN(D, 3), GPIO_OUT_HIGH)
-
-/* Unused signals */
-GPIO(UNUSED_GPIO96,             PIN(9, 6), GPIO_INPUT | GPIO_PULL_UP)
-
-/* I2C pins - Alternate function below configures I2C module on these pins */
-GPIO(EC_I2C0_SENSOR_SCL,       PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C0_SENSOR_SDA,       PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C1_USB_C0_SCL,       PIN(9, 0), GPIO_INPUT)
-GPIO(EC_I2C1_USB_C0_SDA,       PIN(8, 7), GPIO_INPUT)
-GPIO(EC_I2C2_USB_C1_SCL,       PIN(9, 2), GPIO_INPUT)
-GPIO(EC_I2C2_USB_C1_SDA,       PIN(9, 1), GPIO_INPUT)
-GPIO(EC_I2C3_USB_1_MIX_SCL,    PIN(D, 1), GPIO_INPUT)
-GPIO(EC_I2C3_USB_1_MIX_SDA,    PIN(D, 0), GPIO_INPUT)
-GPIO(EC_I2C5_BATTERY_SCL,      PIN(3, 3), GPIO_INPUT)
-GPIO(EC_I2C5_BATTERY_SDA,      PIN(3, 6), GPIO_INPUT)
-GPIO(EC_I2C7_EEPROM_PWR_SCL_R, PIN(B, 3), GPIO_INPUT)
-GPIO(EC_I2C7_EEPROM_PWR_SDA_R, PIN(B, 2), GPIO_INPUT)
-
-/* Battery signals */
-GPIO(EC_BATT_PRES_ODL, 		PIN(E, 1), GPIO_INPUT)
-
-/* Alternate functions GPIO definitions */
-ALTERNATE(PIN_MASK(B, BIT(5) | BIT(4)), 0, MODULE_I2C, (GPIO_INPUT | GPIO_SEL_1P8V)) /* I2C0 */
-ALTERNATE(PIN_MASK(9, BIT(0) | BIT(2) | BIT(1)), 0, MODULE_I2C, 0)                   /* I2C1 SCL / I2C2 */
-ALTERNATE(PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0)                                     /* I2C1 SDA */
-ALTERNATE(PIN_MASK(D, BIT(1) | BIT(0)), 0, MODULE_I2C, 0)                            /* I2C3 */
-ALTERNATE(PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0)                            /* I2C5 */
-ALTERNATE(PIN_MASK(B, BIT(3) | BIT(2)), 0, MODULE_I2C, 0)                            /* I2C7 */
-
-/* This selects between an LED module on the motherboard and one on the daughter
- * board, to be controlled by LED_{1,2,3}_L. PWM allows driving both modules at
- * the same time. */
-ALTERNATE(PIN_MASK(6, BIT(0)), 0, MODULE_PWM, 0)                                     /* LED_SIDESEL_4_L */
-ALTERNATE(PIN_MASK(C, BIT(2) | BIT(3) | BIT(4)), 0, MODULE_PWM, 0)                   /* LED_{3,2,1}_L */
-
-/* Fan signals */
-GPIO(EN_PP5000_FAN,            PIN(6, 1), GPIO_OUT_LOW)
-ALTERNATE(PIN_MASK(B, BIT(7)), 0, MODULE_PWM, 0)	/* FAN_PWM */
-ALTERNATE(PIN_MASK(4, BIT(0)), 0, MODULE_PWM, 0)	/* FAN_SPEED_TACH */
-
-/* Keyboard pins */
-#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP)
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_00-01 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_02-07 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */
-GPIO(EC_KSO_02_INV, PIN(1, 7),                        GPIO_OUT_LOW)  /* KSO_02 */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */
-ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-13 */
-ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_14 */
-ALTERNATE(PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0)                     /* EC_KB_BL_PWM */
-
-/* UART */
-ALTERNATE(PIN_MASK(6, BIT(5) | BIT(4)), 0, MODULE_UART, 0)                           /* UART from EC to Servo */
-
-/* Power Switch Logic (PSL) inputs */
-ALTERNATE(PIN_MASK(D, BIT(2)), 0, MODULE_PMU, 0)                    /* GPIOD2 = EC_LID_OPEN */
-ALTERNATE(PIN_MASK(0, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_PMU, 0)  /* GPIO00 = ACOK_OD,
-                                                                       GPIO01 = H1_EC_PWR_BTN_ODL
-                                                                       GPIO02 = EC_RST_ODL */
-
-/* Temperature sensors */
-ALTERNATE(PIN_MASK(4, BIT(2) | BIT(4) | BIT(5)), 0, MODULE_ADC, 0) /* TEMP_SENSOR1,2,4 */
-ALTERNATE(PIN(F, 1), 0, MODULE_ADC, 0) /* TEMP_SENSOR3 */
diff --git a/board/boldar/led.c b/board/boldar/led.c
deleted file mode 100644
index 6ee71bbe19..0000000000
--- a/board/boldar/led.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control for Volteer
- */
-
-#include "charge_manager.h"
-#include "common.h"
-#include "ec_commands.h"
-#include "hooks.h"
-#include "led_common.h"
-#include "led_pwm.h"
-#include "pwm.h"
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_POWER_LED,
-};
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-struct pwm_led_color_map led_color_map[] = {
-				/* Red, Green, Blue */
-	[EC_LED_COLOR_RED] =    {  100,   0,     0 },
-	[EC_LED_COLOR_GREEN] =  {    0, 100,     0 },
-	[EC_LED_COLOR_BLUE] =   {    0,   0,   100 },
-	/* The green LED seems to be brighter than the others, so turn down
-	 * green from its natural level for these secondary colors.
-	 */
-	[EC_LED_COLOR_YELLOW] = {  100,  70,     0 },
-	[EC_LED_COLOR_WHITE] =  {  100,  70,   100 },
-	[EC_LED_COLOR_AMBER] =  {  100,  20,     0 },
-};
-
-struct pwm_led pwm_leds[] = {
-	/* 2 RGB diffusers controlled by 1 set of 3 channels. */
-	[PWM_LED0] = {
-		.ch0 = PWM_CH_LED3_RED,
-		.ch1 = PWM_CH_LED2_GREEN,
-		.ch2 = PWM_CH_LED1_BLUE,
-		.enable = &pwm_enable,
-		.set_duty = &pwm_set_duty,
-	},
-};
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	brightness_range[EC_LED_COLOR_RED] = 255;
-	brightness_range[EC_LED_COLOR_GREEN] = 255;
-	brightness_range[EC_LED_COLOR_BLUE] = 255;
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	enum pwm_led_id pwm_id;
-
-	/* Convert ec_led_id to pwm_led_id. */
-	if (led_id == EC_LED_ID_POWER_LED)
-		pwm_id = PWM_LED0;
-	else
-		return EC_ERROR_UNKNOWN;
-
-	if (brightness[EC_LED_COLOR_RED])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_RED);
-	else if (brightness[EC_LED_COLOR_GREEN])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_GREEN);
-	else if (brightness[EC_LED_COLOR_BLUE])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_BLUE);
-	else if (brightness[EC_LED_COLOR_YELLOW])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_YELLOW);
-	else if (brightness[EC_LED_COLOR_WHITE])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_WHITE);
-	else if (brightness[EC_LED_COLOR_AMBER])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_AMBER);
-	else
-		/* Otherwise, the "color" is "off". */
-		set_pwm_led_color(pwm_id, -1);
-
-	return EC_SUCCESS;
-}
-
-/* Illuminates the LED on the side of the active charging port. If not charging,
- * illuminates both LEDs.
- */
-static void led_set_charge_port_tick(void)
-{
-	int port;
-	int side_select_duty;
-
-	port = charge_manager_get_active_charge_port();
-	switch (port) {
-	case 0:
-		side_select_duty = 100;
-		break;
-	case 1:
-		side_select_duty = 0;
-		break;
-	default:
-		side_select_duty = 50;
-	}
-
-	if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED))
-		pwm_set_duty(PWM_CH_LED4_SIDESEL, side_select_duty);
-}
-DECLARE_HOOK(HOOK_TICK, led_set_charge_port_tick, HOOK_PRIO_DEFAULT);
diff --git a/board/boldar/sensors.c b/board/boldar/sensors.c
deleted file mode 100644
index 25fab11549..0000000000
--- a/board/boldar/sensors.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer family-specific sensor configuration */
-#include "common.h"
-#include "accelgyro.h"
-#include "driver/accel_lis2dh.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/accelgyro_bmi260.h"
-#include "driver/als_tcs3400.h"
-#include "driver/sync.h"
-#include "keyboard_scan.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "task.h"
-#include "tablet_mode.h"
-#include "util.h"
-
-/******************************************************************************/
-/* Sensors */
-static struct mutex g_lid_accel_mutex;
-static struct mutex g_base_mutex;
-
-/* Lid accel private data */
-static struct stprivate_data g_lis2dh_data;
-
-/* BMI260 private data */
-static struct bmi_drv_data_t g_bmi260_data;
-
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
-	.als_cal.scale = 1,
-	.als_cal.uscale = 0,
-	.als_cal.offset = 0,
-	.als_cal.channel_scale = {
-		.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc from VPD */
-		.cover_scale = ALS_CHANNEL_SCALE(1.0),     /* CT */
-	},
-};
-
-/*
- * TODO: b/146166425 need to calibrate ALS/RGB sensor. At default settings,
- * shining phone flashlight on sensor pegs all readings at 0xFFFF.
- */
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
-	.calibration.rgb_cal[X] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.rgb_cal[Y] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Z] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.irt = INT_TO_FP(1),
-	.saturation.again = TCS_DEFAULT_AGAIN,
-	.saturation.atime = TCS_DEFAULT_ATIME,
-};
-
-/* Rotation matrix for the lid accelerometer */
-static const mat33_fp_t lid_standard_ref = {
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LIS2DH,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &lis2dh_drv,
-		.mutex = &g_lid_accel_mutex,
-		.drv_data = &g_lis2dh_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LIS2DH_ADDR0_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.min_frequency = LIS2DH_ODR_MIN_VAL,
-		.max_frequency = LIS2DH_ODR_MAX_VAL,
-		.default_range = 2, /* g, to support tablet mode */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI260,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi260_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi260_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMI260_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_ACCEL_MIN_FREQ,
-		.max_frequency = BMI_ACCEL_MAX_FREQ,
-		.default_range = 4, /* g */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI260,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi260_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi260_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMI260_ADDR0_FLAGS,
-		.default_range = 1000, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_GYRO_MIN_FREQ,
-		.max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-	[CLEAR_ALS] = {
-		.name = "Clear Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_drv,
-		.drv_data = &g_tcs3400_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-		.min_frequency = TCS3400_LIGHT_MIN_FREQ,
-		.max_frequency = TCS3400_LIGHT_MAX_FREQ,
-		.config = {
-			/* Run ALS sensor in S0 */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 1000,
-			},
-		},
-	},
-
-	[RGB_ALS] = {
-		/*
-		 * RGB channels read by CLEAR_ALS and so the i2c port and
-		 * address do not need to be defined for RGB_ALS.
-		 */
-		.name = "RGB Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT_RGB,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_rgb_drv,
-		.drv_data = &g_tcs3400_rgb_data,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
-static void baseboard_sensors_init(void)
-{
-	/* Note - BMA253 interrupt unused by EC */
-
-	/* Enable interrupt for the TCS3400 color light sensor */
-	gpio_enable_interrupt(GPIO_EC_ALS_RGB_INT_L);
-	/* Enable interrupt for the BMI260 accel/gyro sensor */
-	gpio_enable_interrupt(GPIO_EC_IMU_INT_L);
-}
-DECLARE_HOOK(HOOK_INIT, baseboard_sensors_init, HOOK_PRIO_DEFAULT);
diff --git a/board/boldar/vif_override.xml b/board/boldar/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/boldar/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->