ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 488 deletions

diff --git a/board/corori/board.c b/board/corori/board.c
deleted file mode 100644
index 323a5a8d71..0000000000
--- a/board/corori/board.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Lalala board-specific configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "cbi_fw_config.h"
-#include "cbi_ssfc.h"
-#include "cbi_fw_config.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "chipset.h"
-#include "common.h"
-#include "compile_time_macros.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "temp_sensor.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/tcpm/raa489000.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/usb_mux/pi3usb3x532.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_config.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "stdbool.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#define INT_RECHECK_US 5000
-
-#define ADC_VOL_UP_MASK     BIT(0)
-#define ADC_VOL_DOWN_MASK   BIT(1)
-
-
-/******************************************************************************/
-/* USB-A Configuration */
-const int usb_port_enable[USB_PORT_COUNT] = {
-	GPIO_EN_USB_A0_VBUS,
-};
-
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
-	/*
-	 * F3 key scan cycle completed but scan input is not
-	 * charging to logic high when EC start scan next
-	 * column for "T" key, so we set .output_settle_us
-	 * to 80us from 50us.
-	 */
-	.output_settle_us = 80,
-	.debounce_down_us = 9 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-	.actual_key_mask = {
-		0x1c, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xfe, 0x55, 0xfe, 0xff, 0xff, 0xff,  /* full set */
-	},
-};
-
-static const struct ec_response_keybd_config lalala_keybd = {
-	/* Default Chromeos keyboard config */
-	.num_top_row_keys = 10,
-	.action_keys = {
-		TK_BACK,		/* T1 */
-		TK_FORWARD,		/* T2 */
-		TK_REFRESH,		/* T3 */
-		TK_FULLSCREEN,		/* T4 */
-		TK_OVERVIEW,		/* T5 */
-		TK_BRIGHTNESS_DOWN,	/* T6 */
-		TK_BRIGHTNESS_UP,	/* T7 */
-		TK_VOL_MUTE,		/* T8 */
-		TK_VOL_DOWN,		/* T9 */
-		TK_VOL_UP,		/* T10 */
-	},
-	/* No function keys, no numeric keypad, has screenlock key */
-	.capabilities = KEYBD_CAP_SCRNLOCK_KEY,
-};
-
-__override const struct ec_response_keybd_config
-*board_vivaldi_keybd_config(void)
-{
-	return &lalala_keybd;
-}
-
-/* C0 interrupt line shared by BC 1.2 and charger */
-static void check_c0_line(void);
-DECLARE_DEFERRED(check_c0_line);
-
-static void notify_c0_chips(void)
-{
-	/*
-	 * The interrupt line is shared between the TCPC and BC 1.2 detection
-	 * chip.  Therefore we'll need to check both ICs.
-	 */
-	schedule_deferred_pd_interrupt(0);
-	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-static void check_c0_line(void)
-{
-	/*
-	 * If line is still being held low, see if there's more to process from
-	 * one of the chips
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		notify_c0_chips();
-		hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-	}
-}
-
-static void usb_c0_interrupt(enum gpio_signal s)
-{
-	/* Cancel any previous calls to check the interrupt line */
-	hook_call_deferred(&check_c0_line_data, -1);
-
-	/* Notify all chips using this line that an interrupt came in */
-	notify_c0_chips();
-
-	/* Check the line again in 5ms */
-	hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-
-}
-
-static void c0_ccsbu_ovp_interrupt(enum gpio_signal s)
-{
-	cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event");
-	pd_handle_cc_overvoltage(0);
-}
-
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_1] = {
-		.name = "TEMP_SENSOR1",
-		.input_ch = NPCX_ADC_CH0,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-	[ADC_TEMP_SENSOR_2] = {
-		.name = "TEMP_SENSOR2",
-		.input_ch = NPCX_ADC_CH1,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-	[ADC_VSNS_PP3300_A] = {
-		.name = "PP3300_A_PGOOD",
-		.input_ch = NPCX_ADC_CH9,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* Thermistors */
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_1] = {.name = "Memory",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_1},
-	[TEMP_SENSOR_2] = {.name = "Charger",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_2},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-const static struct ec_thermal_config thermal_a = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(85),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-};
-
-const static struct ec_thermal_config thermal_b = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(73),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(85),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-};
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_thermal(void)
-{
-	thermal_params[TEMP_SENSOR_1] = thermal_a;
-	thermal_params[TEMP_SENSOR_2] = thermal_b;
-}
-
-void board_hibernate(void)
-{
-	/*
-	 * Both charger ICs need to be put into their "low power mode" before
-	 * entering the Z-state.
-	 */
-	raa489000_hibernate(1, true);
-	raa489000_hibernate(0, true);
-}
-
-void board_reset_pd_mcu(void)
-{
-	/*
-	 * TODO(b:147316511): Here we could issue a digital reset to the IC,
-	 * unsure if we actually want to do that or not yet.
-	 */
-}
-
-static void set_5v_gpio(int level)
-{
-	gpio_set_level(GPIO_EN_PP5000, level);
-	gpio_set_level(GPIO_EN_USB_A0_VBUS, level);
-}
-
-__override void board_power_5v_enable(int enable)
-{
-	/*
-	 * Port 0 simply has a GPIO to turn on the 5V regulator, however, 5V is
-	 * generated locally on the sub board and we need to set the comparator
-	 * polarity on the sub board charger IC.
-	 */
-	set_5v_gpio(!!enable);
-}
-
-int board_is_sourcing_vbus(int port)
-{
-	int regval;
-
-	tcpc_read(port, TCPC_REG_POWER_STATUS, &regval);
-	return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS);
-
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_real_port = (port >= 0 &&
-			    port < CONFIG_USB_PD_PORT_MAX_COUNT);
-	int i;
-	int old_port;
-
-	if (!is_real_port && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	old_port = charge_manager_get_active_charge_port();
-
-	CPRINTS("New chg p%d", port);
-
-	/* Disable all ports. */
-	if (port == CHARGE_PORT_NONE) {
-		for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++)
-			tcpc_write(i, TCPC_REG_COMMAND,
-				   TCPC_REG_COMMAND_SNK_CTRL_LOW);
-
-		return EC_SUCCESS;
-	}
-
-	/* Check if port is sourcing VBUS. */
-	if (board_is_sourcing_vbus(port)) {
-		CPRINTS("Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-	/*
-	 * Turn off the other ports' sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
-		if (i == port)
-			continue;
-
-		if (tcpc_write(i, TCPC_REG_COMMAND,
-			       TCPC_REG_COMMAND_SNK_CTRL_LOW))
-			CPRINTS("p%d: sink path disable failed.", i);
-	}
-
-	/*
-	 * Stop the charger IC from switching while changing ports.  Otherwise,
-	 * we can overcurrent the adapter we're switching to. (crbug.com/926056)
-	 */
-	if (old_port != CHARGE_PORT_NONE)
-		charger_discharge_on_ac(1);
-
-	/* Enable requested charge port. */
-	if (tcpc_write(port, TCPC_REG_COMMAND,
-		       TCPC_REG_COMMAND_SNK_CTRL_HIGH)) {
-		CPRINTS("p%d: sink path enable failed.", port);
-		charger_discharge_on_ac(0);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	/* Allow the charger IC to begin/continue switching. */
-	charger_discharge_on_ac(0);
-
-	return EC_SUCCESS;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma,
-			    int max_ma, int charge_mv)
-{
-	int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
-	/*
-	 * b/147463641: The charger IC seems to overdraw ~4%, therefore we
-	 * reduce our target accordingly.
-	 */
-	icl = icl * 96 / 100;
-	charge_set_input_current_limit(icl, charge_mv);
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
-	if (port < 0 || port > board_get_usb_pd_port_count())
-		return;
-
-	raa489000_set_output_current(port, rp);
-}
-
-void board_init(void)
-{
-	int on;
-
-	gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
-	check_c0_line();
-
-	/* Turn on 5V if the system is on, otherwise turn it off. */
-	on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND |
-			      CHIPSET_STATE_SOFT_OFF);
-	board_power_5v_enable(on);
-
-	/* Initialize THERMAL */
-	setup_thermal();
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-__override void ocpc_get_pid_constants(int *kp, int *kp_div,
-				       int *ki, int *ki_div,
-				       int *kd, int *kd_div)
-{
-	*kp = 1;
-	*kp_div = 20;
-	*ki = 1;
-	*ki_div = 250;
-	*kd = 0;
-	*kd_div = 1;
-}
-
-int pd_snk_is_vbus_provided(int port)
-{
-	return pd_check_vbus_level(port, VBUS_PRESENT);
-}
-
-const struct charger_config_t chg_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
-		.drv = &isl923x_drv,
-	},
-};
-const unsigned int chg_cnt = ARRAY_SIZE(chg_chips);
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-		.flags = PI3USB9201_ALWAYS_POWERED,
-	},
-};
-
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0,
-			.addr_flags = RAA489000_TCPC0_I2C_FLAGS,
-		},
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-		.drv = &raa489000_tcpm_drv,
-	},
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB3X532_I2C_ADDR0,
-		.driver = &pi3usb3x532_usb_mux_driver,
-	},
-};
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-	int regval;
-
-	/*
-	 * The interrupt line is shared between the TCPC and BC1.2 detector IC.
-	 * Therefore, go out and actually read the alert registers to report the
-	 * alert status.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		if (!tcpc_read16(0, TCPC_REG_ALERT, &regval)) {
-			/* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */
-			if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0))
-				regval &= ~((1 << 14) | (1 << 13) | (1 << 12));
-
-			if (regval)
-				status |= PD_STATUS_TCPC_ALERT_0;
-		}
-	}
-
-	return status;
-}
-
-static void board_extpower(void)
-{
-	int extpower_present;
-
-	if (pd_is_connected(0))
-		extpower_present = extpower_is_present();
-	else
-		extpower_present = 0;
-
-	gpio_set_level(GPIO_EC_ACOK_OTG, extpower_present);
-}
-DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT);
-
-const struct i2c_port_t i2c_ports[] = {
-	{
-		"eeprom", I2C_PORT_EEPROM, 400, GPIO_EC_I2C_EEPROM_SCL,
-		GPIO_EC_I2C_EEPROM_SDA
-	},
-
-	{
-		"battery", I2C_PORT_BATTERY, 100, GPIO_EC_I2C_BATTERY_SCL,
-		GPIO_EC_I2C_BATTERY_SDA
-	},
-
-#ifdef HAS_TASK_MOTIONSENSE
-	{
-		"sensor", I2C_PORT_SENSOR, 400, GPIO_EC_I2C_SENSOR_SCL,
-		GPIO_EC_I2C_SENSOR_SDA
-	},
-#endif
-
-	{
-		"usbc0", I2C_PORT_USB_C0, 1000, GPIO_EC_I2C_USB_C0_SCL,
-		GPIO_EC_I2C_USB_C0_SDA
-	},
-#if CONFIG_USB_PD_PORT_MAX_COUNT > 1
-	{
-		"sub_usbc1", I2C_PORT_SUB_USB_C1, 1000,
-		GPIO_EC_I2C_SUB_USB_C1_SCL, GPIO_EC_I2C_SUB_USB_C1_SDA
-	},
-#endif
-};