ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 344 deletions

diff --git a/board/dood/board.c b/board/dood/board.c
deleted file mode 100644
index cef4c21268..0000000000
--- a/board/dood/board.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* dood board-specific configuration */
-
-#include "adc.h"
-#include "battery.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accel_kionix.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/charger/bd9995x.h"
-#include "driver/ppc/nx20p348x.h"
-#include "driver/ppc/syv682x.h"
-#include "driver/sync.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/tcpm/tcpm.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_config.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "motion_sense.h"
-#include "power.h"
-#include "power_button.h"
-#include "stdbool.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "tcpm/tcpci.h"
-#include "temp_sensor.h"
-#include "temp_sensor/thermistor.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#define USB_PD_PORT_ANX7447	0
-#define USB_PD_PORT_PS8751	1
-
-static uint8_t sku_id;
-
-/*
- * We have total 30 pins for keyboard connecter {-1, -1} mean
- * the N/A pin that don't consider it and reserve index 0 area
- * that we don't have pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
-		{-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6},
-		{0, 7}, {-1, -1}, {-1, -1}, {1, 4}, {1, 3},
-		{-1, -1}, {1, 6}, {1, 7}, {3, 1}, {2, 0},
-		{1, 5}, {2, 6}, {2, 7}, {2, 1}, {2, 4},
-		{2, 5}, {1, 2}, {2, 3}, {2, 2}, {3, 0},
-		{-1, -1}, {0, 4}, {-1, -1}, {8, 2}, {-1, -1},
-		{-1, -1},
-};
-
-const int keyboard_factory_scan_pins_used =
-			ARRAY_SIZE(keyboard_factory_scan_pins);
-
-/* Check PPC ID and board version to decide which one ppc is used. */
-static bool support_syv_ppc(void)
-{
-	uint32_t board_version = 0;
-
-	if (cbi_get_board_version(&board_version) != EC_SUCCESS)
-		CPRINTSUSB("Get board version failed.");
-
-	if ((board_version >= 5) && (gpio_get_level(GPIO_PPC_ID)))
-		return true;
-
-	return false;
-}
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
-
-	switch (signal) {
-	case GPIO_USB_PD_C0_INT_ODL:
-		if (support_syv_ppc())
-			syv682x_interrupt(0);
-		else
-			nx20p348x_interrupt(0);
-		break;
-
-	case GPIO_USB_PD_C1_INT_ODL:
-		if (support_syv_ppc())
-			syv682x_interrupt(1);
-		else
-			nx20p348x_interrupt(1);
-		break;
-
-	default:
-		break;
-	}
-}
-
-/* Must come after other header files and GPIO interrupts*/
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_AMB] = {
-		"TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_TEMP_SENSOR_CHARGER] = {
-		"TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	/* Vbus sensing (1/10 voltage divider). */
-	[ADC_VBUS_C0] = {
-		"VBUS_C0", NPCX_ADC_CH9, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0},
-	[ADC_VBUS_C1] = {
-		"VBUS_C1", NPCX_ADC_CH4, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_BATTERY] = {.name = "Battery",
-				 .type = TEMP_SENSOR_TYPE_BATTERY,
-				 .read = charge_get_battery_temp,
-				 .idx = 0},
-	[TEMP_SENSOR_AMBIENT] = {.name = "Ambient",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_51k1_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_AMB},
-	[TEMP_SENSOR_CHARGER] = {.name = "Charger",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_13k7_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_CHARGER},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/* Motion sensors */
-/* Mutexes */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* Matrix to rotate accelrator into standard reference frame */
-const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ FLOAT_TO_FP(1), 0,  0},
-	{ 0, 0,  FLOAT_TO_FP(1)}
-};
-
-/* sensor private data */
-static struct kionix_accel_data g_kx022_data;
-static struct bmi_drv_data_t g_bmi160_data;
-
-/* Drivers */
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-	 .name = "Lid Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_KX022,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_LID,
-	 .drv = &kionix_accel_drv,
-	 .mutex = &g_lid_mutex,
-	 .drv_data = &g_kx022_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = KX022_ADDR1_FLAGS,
-	 .rot_standard_ref = NULL, /* Identity matrix. */
-	 .default_range = 2, /* g */
-	 .min_frequency = KX022_ACCEL_MIN_FREQ,
-	 .max_frequency = KX022_ACCEL_MAX_FREQ,
-	 .config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		 /* Sensor on for lid angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	 },
-	},
-	[BASE_ACCEL] = {
-	 .name = "Base Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .rot_standard_ref = &base_standard_ref,
-	 .default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-	 .min_frequency = BMI_ACCEL_MIN_FREQ,
-	 .max_frequency = BMI_ACCEL_MAX_FREQ,
-	 .config = {
-		 /* EC use accel for angle detection */
-		 [SENSOR_CONFIG_EC_S0] = {
-			.odr = 13000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		 },
-		 /* Sensor on for angle detection */
-		 [SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		 },
-	 },
-	},
-	[BASE_GYRO] = {
-	 .name = "Base Gyro",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_GYRO,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .default_range = 1000, /* dps */
-	 .rot_standard_ref = &base_standard_ref,
-	 .min_frequency = BMI_GYRO_MIN_FREQ,
-	 .max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-};
-
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-static int board_is_convertible(void)
-{
-	/* Default supports convertible */
-	return true;
-}
-
-static void board_update_sensor_config_from_sku(void)
-{
-	if (board_is_convertible()) {
-		motion_sensor_count = ARRAY_SIZE(motion_sensors);
-		/* Enable Base Accel interrupt */
-		gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-	} else {
-		motion_sensor_count = 0;
-		gmr_tablet_switch_disable();
-		/* Base accel is not stuffed, don't allow line to float */
-		gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-}
-
-/* Read CBI from i2c eeprom and initialize variables for board variants */
-static void cbi_init(void)
-{
-	uint32_t val;
-
-	if (cbi_get_sku_id(&val) != EC_SUCCESS || val > UINT8_MAX)
-		return;
-	sku_id = val;
-	CPRINTSUSB("SKU: %d", sku_id);
-
-	board_update_sensor_config_from_sku();
-}
-DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1);
-
-void board_hibernate_late(void)
-{
-	int i;
-
-	const uint32_t hibernate_pins[][2] = {
-		/* Turn off LEDs before going to hibernate */
-		{GPIO_BAT_LED_WHITE_L, GPIO_INPUT | GPIO_PULL_UP},
-		{GPIO_BAT_LED_AMBER_L, GPIO_INPUT | GPIO_PULL_UP},
-	};
-
-	for (i = 0; i < ARRAY_SIZE(hibernate_pins); ++i)
-		gpio_set_flags(hibernate_pins[i][0], hibernate_pins[i][1]);
-}
-
-/* This callback disables keyboard when convertibles are fully open */
-__override void lid_angle_peripheral_enable(int enable)
-{
-	/*
-	 * If the lid is in tablet position via other sensors,
-	 * ignore the lid angle, which might be faulty then
-	 * disable keyboard.
-	 */
-	if (tablet_get_mode())
-		enable = 0;
-	if (board_is_convertible())
-		keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE);
-}
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* Check that port number is valid. */
-	if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
-		return;
-
-	/* Note that the level is inverted because the pin is active low. */
-	gpio_set_level(GPIO_USB_C_OC, !is_overcurrented);
-}
-
-const struct ppc_config_t ppc_syv682x_port0 = {
-		.i2c_port = I2C_PORT_TCPC0,
-		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
-		.drv = &syv682x_drv,
-};
-
-const struct ppc_config_t ppc_syv682x_port1 = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
-		.drv = &syv682x_drv,
-};
-
-static void board_setup_ppc(void)
-{
-	if (!support_syv_ppc())
-		return;
-
-	memcpy(&ppc_chips[USB_PD_PORT_TCPC_0],
-		&ppc_syv682x_port0,
-		sizeof(struct ppc_config_t));
-	memcpy(&ppc_chips[USB_PD_PORT_TCPC_1],
-		&ppc_syv682x_port1,
-		sizeof(struct ppc_config_t));
-
-	gpio_set_flags(GPIO_USB_PD_C0_INT_ODL, GPIO_INT_BOTH);
-	gpio_set_flags(GPIO_USB_PD_C1_INT_ODL, GPIO_INT_BOTH);
-}
-DECLARE_HOOK(HOOK_INIT, board_setup_ppc, HOOK_PRIO_INIT_I2C + 2);
-
-int ppc_get_alert_status(int port)
-{
-	if (port == 0)
-		return gpio_get_level(GPIO_USB_PD_C0_INT_ODL) == 0;
-
-	return gpio_get_level(GPIO_USB_PD_C1_INT_ODL) == 0;
-}