ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

8 files changed, 0 insertions, 1174 deletions

diff --git a/board/dood/battery.c b/board/dood/battery.c
deleted file mode 100644
index e719ea3151..0000000000
--- a/board/dood/battery.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all Dood battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* LGC AC15A8J Battery Information */
-	[BATTERY_LGC15] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC",
-			.device_name = "AC15A8J",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0002,
-				.disconnect_val = 0x0,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13200,
-			.voltage_normal		= 11520, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* Panasonic AP1505L Battery Information */
-	[BATTERY_PANASONIC_AP15O5L] = {
-		.fuel_gauge = {
-			.manuf_name = "PANASONIC",
-			.device_name = "AP15O5L",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x4000,
-				.disconnect_val = 0x0,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13200,
-			.voltage_normal		= 11550, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* SANYO AC15A3J Battery Information */
-	[BATTERY_SANYO] = {
-		.fuel_gauge = {
-			.manuf_name = "SANYO",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x4000,
-				.disconnect_val = 0x0,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= TARGET_WITH_MARGIN(13200, 5),
-			.voltage_normal		= 11550, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* Sony Ap13J4K Battery Information */
-	[BATTERY_SONY] = {
-		.fuel_gauge = {
-			.manuf_name = "SONYCorp",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x8000,
-				.disconnect_val = 0x8000,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= TARGET_WITH_MARGIN(13200, 5),
-			.voltage_normal		= 11400, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* Simplo AP13J7K Battery Information */
-	[BATTERY_SMP_AP13J7K] = {
-		.fuel_gauge = {
-			.manuf_name = "SIMPLO",
-			.device_name = "AP13J7K",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0002,
-				.disconnect_val = 0x0000,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13050,
-			.voltage_normal		= 11400, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 45,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* Panasonic AC15A3J Battery Information */
-	[BATTERY_PANASONIC_AC15A3J] = {
-		.fuel_gauge = {
-			.manuf_name = "PANASONIC",
-			.device_name = "AC15A3J",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x4000,
-				.disconnect_val = 0x0,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13200,
-			.voltage_normal		= 11550, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 75,
-		},
-	},
-
-	/* LGC AP18C8K Battery Information */
-	[BATTERY_LGC_AP18C8K] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC KT0030G020",
-			.device_name = "AP18C8K",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x43,
-				.reg_mask = 0x0001,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max		= 13050,
-			.voltage_normal		= 11250,
-			.voltage_min		= 9000,
-			.precharge_current	= 256,
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 75,
-		},
-	},
-
-	/* Murata AP18C4K Battery Information */
-	[BATTERY_MURATA_AP18C4K] = {
-		.fuel_gauge = {
-			.manuf_name = "Murata KT00304012",
-			.device_name = "AP18C4K",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x2000,
-				.disconnect_val = 0x2000,
-			},
-		},
-		.batt_info = {
-			.voltage_max		= 13200,
-			.voltage_normal		= 11400,
-			.voltage_min		= 9000,
-			.precharge_current	= 256,
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 75,
-		},
-	},
-
-	/* LGC AP19A8K Battery Information */
-	[BATTERY_LGC_AP19A8K] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC KTxxxxGxxx",
-			.device_name = "AP19A8K",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x43,
-				.reg_mask = 0x0001,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max		= 13200,
-			.voltage_normal		= 11550,
-			.voltage_min		= 9000,
-			.precharge_current	= 256,
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 75,
-		},
-	},
-
-	/* LGC KT0030G023 Battery Information */
-	[BATTERY_LGC_G023] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC KT0030G023",
-			.device_name = "AP19A8K",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x43,
-				.reg_mask = 0x0001,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max            = 13200,
-			.voltage_normal         = 11550,
-			.voltage_min            = 9000,
-			.precharge_current      = 256,
-			.start_charging_min_c   = 0,
-			.start_charging_max_c   = 50,
-			.charging_min_c         = 0,
-			.charging_max_c         = 60,
-			.discharging_min_c      = -20,
-			.discharging_max_c      = 75,
-		},
-	},
-
-	/* Simplo PC-VP-BP44 Battery Information */
-	[BATTERY_SMP_PCVPBP144] = {
-		.fuel_gauge = {
-			.manuf_name = "SIMPLO",
-			.device_name = "PC-VP-BP144",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13050,
-			.voltage_normal		= 11250, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 128,	/* mA */
-			.start_charging_min_c   = 0,
-			.start_charging_max_c   = 45,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* Simplo PC-VP-BP126 Battery Information */
-	[BATTERY_SMP_PCVPBP126] = {
-		.fuel_gauge = {
-			.manuf_name = "SIMPLO",
-			.device_name = "PC-VP-BP126",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13200,
-			.voltage_normal		= 11520, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 128,	/* mA */
-			.start_charging_min_c   = 0,
-			.start_charging_max_c   = 45,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* Simplo PC-VP-BP136 Battery Information */
-	[BATTERY_SMP_PCVPBP136] = {
-		.fuel_gauge = {
-			.manuf_name = "SIMPLO",
-			.device_name = "PC-VP-BP136",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13200,
-			.voltage_normal		= 11520, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 128,	/* mA */
-			.start_charging_min_c   = 0,
-			.start_charging_max_c   = 45,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 60,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_PANASONIC_AC15A3J;
diff --git a/board/dood/board.c b/board/dood/board.c
deleted file mode 100644
index cef4c21268..0000000000
--- a/board/dood/board.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* dood board-specific configuration */
-
-#include "adc.h"
-#include "battery.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accel_kionix.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/charger/bd9995x.h"
-#include "driver/ppc/nx20p348x.h"
-#include "driver/ppc/syv682x.h"
-#include "driver/sync.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/tcpm/tcpm.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_config.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "motion_sense.h"
-#include "power.h"
-#include "power_button.h"
-#include "stdbool.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "tcpm/tcpci.h"
-#include "temp_sensor.h"
-#include "temp_sensor/thermistor.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#define USB_PD_PORT_ANX7447	0
-#define USB_PD_PORT_PS8751	1
-
-static uint8_t sku_id;
-
-/*
- * We have total 30 pins for keyboard connecter {-1, -1} mean
- * the N/A pin that don't consider it and reserve index 0 area
- * that we don't have pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
-		{-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6},
-		{0, 7}, {-1, -1}, {-1, -1}, {1, 4}, {1, 3},
-		{-1, -1}, {1, 6}, {1, 7}, {3, 1}, {2, 0},
-		{1, 5}, {2, 6}, {2, 7}, {2, 1}, {2, 4},
-		{2, 5}, {1, 2}, {2, 3}, {2, 2}, {3, 0},
-		{-1, -1}, {0, 4}, {-1, -1}, {8, 2}, {-1, -1},
-		{-1, -1},
-};
-
-const int keyboard_factory_scan_pins_used =
-			ARRAY_SIZE(keyboard_factory_scan_pins);
-
-/* Check PPC ID and board version to decide which one ppc is used. */
-static bool support_syv_ppc(void)
-{
-	uint32_t board_version = 0;
-
-	if (cbi_get_board_version(&board_version) != EC_SUCCESS)
-		CPRINTSUSB("Get board version failed.");
-
-	if ((board_version >= 5) && (gpio_get_level(GPIO_PPC_ID)))
-		return true;
-
-	return false;
-}
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
-
-	switch (signal) {
-	case GPIO_USB_PD_C0_INT_ODL:
-		if (support_syv_ppc())
-			syv682x_interrupt(0);
-		else
-			nx20p348x_interrupt(0);
-		break;
-
-	case GPIO_USB_PD_C1_INT_ODL:
-		if (support_syv_ppc())
-			syv682x_interrupt(1);
-		else
-			nx20p348x_interrupt(1);
-		break;
-
-	default:
-		break;
-	}
-}
-
-/* Must come after other header files and GPIO interrupts*/
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_AMB] = {
-		"TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_TEMP_SENSOR_CHARGER] = {
-		"TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	/* Vbus sensing (1/10 voltage divider). */
-	[ADC_VBUS_C0] = {
-		"VBUS_C0", NPCX_ADC_CH9, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0},
-	[ADC_VBUS_C1] = {
-		"VBUS_C1", NPCX_ADC_CH4, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_BATTERY] = {.name = "Battery",
-				 .type = TEMP_SENSOR_TYPE_BATTERY,
-				 .read = charge_get_battery_temp,
-				 .idx = 0},
-	[TEMP_SENSOR_AMBIENT] = {.name = "Ambient",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_51k1_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_AMB},
-	[TEMP_SENSOR_CHARGER] = {.name = "Charger",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_13k7_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_CHARGER},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/* Motion sensors */
-/* Mutexes */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* Matrix to rotate accelrator into standard reference frame */
-const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ FLOAT_TO_FP(1), 0,  0},
-	{ 0, 0,  FLOAT_TO_FP(1)}
-};
-
-/* sensor private data */
-static struct kionix_accel_data g_kx022_data;
-static struct bmi_drv_data_t g_bmi160_data;
-
-/* Drivers */
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-	 .name = "Lid Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_KX022,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_LID,
-	 .drv = &kionix_accel_drv,
-	 .mutex = &g_lid_mutex,
-	 .drv_data = &g_kx022_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = KX022_ADDR1_FLAGS,
-	 .rot_standard_ref = NULL, /* Identity matrix. */
-	 .default_range = 2, /* g */
-	 .min_frequency = KX022_ACCEL_MIN_FREQ,
-	 .max_frequency = KX022_ACCEL_MAX_FREQ,
-	 .config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		 /* Sensor on for lid angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	 },
-	},
-	[BASE_ACCEL] = {
-	 .name = "Base Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .rot_standard_ref = &base_standard_ref,
-	 .default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-	 .min_frequency = BMI_ACCEL_MIN_FREQ,
-	 .max_frequency = BMI_ACCEL_MAX_FREQ,
-	 .config = {
-		 /* EC use accel for angle detection */
-		 [SENSOR_CONFIG_EC_S0] = {
-			.odr = 13000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		 },
-		 /* Sensor on for angle detection */
-		 [SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		 },
-	 },
-	},
-	[BASE_GYRO] = {
-	 .name = "Base Gyro",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_GYRO,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .default_range = 1000, /* dps */
-	 .rot_standard_ref = &base_standard_ref,
-	 .min_frequency = BMI_GYRO_MIN_FREQ,
-	 .max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-};
-
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-static int board_is_convertible(void)
-{
-	/* Default supports convertible */
-	return true;
-}
-
-static void board_update_sensor_config_from_sku(void)
-{
-	if (board_is_convertible()) {
-		motion_sensor_count = ARRAY_SIZE(motion_sensors);
-		/* Enable Base Accel interrupt */
-		gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-	} else {
-		motion_sensor_count = 0;
-		gmr_tablet_switch_disable();
-		/* Base accel is not stuffed, don't allow line to float */
-		gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-}
-
-/* Read CBI from i2c eeprom and initialize variables for board variants */
-static void cbi_init(void)
-{
-	uint32_t val;
-
-	if (cbi_get_sku_id(&val) != EC_SUCCESS || val > UINT8_MAX)
-		return;
-	sku_id = val;
-	CPRINTSUSB("SKU: %d", sku_id);
-
-	board_update_sensor_config_from_sku();
-}
-DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1);
-
-void board_hibernate_late(void)
-{
-	int i;
-
-	const uint32_t hibernate_pins[][2] = {
-		/* Turn off LEDs before going to hibernate */
-		{GPIO_BAT_LED_WHITE_L, GPIO_INPUT | GPIO_PULL_UP},
-		{GPIO_BAT_LED_AMBER_L, GPIO_INPUT | GPIO_PULL_UP},
-	};
-
-	for (i = 0; i < ARRAY_SIZE(hibernate_pins); ++i)
-		gpio_set_flags(hibernate_pins[i][0], hibernate_pins[i][1]);
-}
-
-/* This callback disables keyboard when convertibles are fully open */
-__override void lid_angle_peripheral_enable(int enable)
-{
-	/*
-	 * If the lid is in tablet position via other sensors,
-	 * ignore the lid angle, which might be faulty then
-	 * disable keyboard.
-	 */
-	if (tablet_get_mode())
-		enable = 0;
-	if (board_is_convertible())
-		keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE);
-}
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* Check that port number is valid. */
-	if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
-		return;
-
-	/* Note that the level is inverted because the pin is active low. */
-	gpio_set_level(GPIO_USB_C_OC, !is_overcurrented);
-}
-
-const struct ppc_config_t ppc_syv682x_port0 = {
-		.i2c_port = I2C_PORT_TCPC0,
-		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
-		.drv = &syv682x_drv,
-};
-
-const struct ppc_config_t ppc_syv682x_port1 = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
-		.drv = &syv682x_drv,
-};
-
-static void board_setup_ppc(void)
-{
-	if (!support_syv_ppc())
-		return;
-
-	memcpy(&ppc_chips[USB_PD_PORT_TCPC_0],
-		&ppc_syv682x_port0,
-		sizeof(struct ppc_config_t));
-	memcpy(&ppc_chips[USB_PD_PORT_TCPC_1],
-		&ppc_syv682x_port1,
-		sizeof(struct ppc_config_t));
-
-	gpio_set_flags(GPIO_USB_PD_C0_INT_ODL, GPIO_INT_BOTH);
-	gpio_set_flags(GPIO_USB_PD_C1_INT_ODL, GPIO_INT_BOTH);
-}
-DECLARE_HOOK(HOOK_INIT, board_setup_ppc, HOOK_PRIO_INIT_I2C + 2);
-
-int ppc_get_alert_status(int port)
-{
-	if (port == 0)
-		return gpio_get_level(GPIO_USB_PD_C0_INT_ODL) == 0;
-
-	return gpio_get_level(GPIO_USB_PD_C1_INT_ODL) == 0;
-}
diff --git a/board/dood/board.h b/board/dood/board.h
deleted file mode 100644
index dcb5c93005..0000000000
--- a/board/dood/board.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Dood board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Select Baseboard features */
-#define VARIANT_OCTOPUS_EC_NPCX796FB
-#define VARIANT_OCTOPUS_CHARGER_ISL9238
-#include "baseboard.h"
-
-/* I2C bus configuraiton */
-#define I2C_PORT_ACCEL	I2C_PORT_SENSOR
-
-/* EC console commands  */
-#define CONFIG_CMD_ACCELS
-#define CONFIG_CMD_ACCEL_INFO
-
-#define CONFIG_LED_COMMON
-
-/* Sensors */
-#define CONFIG_ACCEL_KX022	/* Lid accel */
-#define CONFIG_ACCELGYRO_BMI160	/* Base accel */
-
-#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-
-/* Motion Sense Task Events */
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-#define CONFIG_SYNC_INT_EVENT	\
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-#define CONFIG_VOLUME_BUTTONS
-#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL
-
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_THERMISTOR
-#define CONFIG_STEINHART_HART_3V3_13K7_47K_4050B
-#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
-
-/* Additional PPC second source */
-#define CONFIG_USBC_PPC_SYV682X
-#define CONFIG_USBC_PPC_DEDICATED_INT
-#undef CONFIG_SYV682X_HV_ILIM
-#define CONFIG_SYV682X_HV_ILIM SYV682X_HV_ILIM_5_50
-/* SYV682 isn't connected to CC, so TCPC must provide VCONN */
-#define CONFIG_USBC_PPC_SYV682X_NO_CC
-
-
-#ifndef __ASSEMBLER__
-
-/* support factory keyboard test */
-#define CONFIG_KEYBOARD_FACTORY_TEST
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum adc_channel {
-	ADC_TEMP_SENSOR_AMB,		/* ADC0 */
-	ADC_TEMP_SENSOR_CHARGER,	/* ADC1 */
-	ADC_VBUS_C0,			/* ADC9 */
-	ADC_VBUS_C1,			/* ADC4 */
-	ADC_CH_COUNT
-};
-
-enum temp_sensor_id {
-	TEMP_SENSOR_BATTERY,
-	TEMP_SENSOR_AMBIENT,
-	TEMP_SENSOR_CHARGER,
-	TEMP_SENSOR_COUNT
-};
-
-/* Motion sensors */
-enum sensor_id {
-	LID_ACCEL,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT
-};
-
-/* List of possible batteries */
-enum battery_type {
-	BATTERY_LGC15,
-	BATTERY_PANASONIC_AP15O5L,
-	BATTERY_SANYO,
-	BATTERY_SONY,
-	BATTERY_SMP_AP13J7K,
-	BATTERY_PANASONIC_AC15A3J,
-	BATTERY_LGC_AP18C8K,
-	BATTERY_MURATA_AP18C4K,
-	BATTERY_LGC_AP19A8K,
-	BATTERY_LGC_G023,
-	BATTERY_SMP_PCVPBP144,
-	BATTERY_SMP_PCVPBP126,
-	BATTERY_SMP_PCVPBP136,
-	BATTERY_TYPE_COUNT,
-};
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/dood/build.mk b/board/dood/build.mk
deleted file mode 100644
index 3d04b75731..0000000000
--- a/board/dood/build.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# -*- makefile -*-
-# Copyright 2018 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m6fb
-BASEBOARD:=octopus
-
-board-y=board.o led.o
-board-$(CONFIG_BATTERY_SMART)+=battery.o
diff --git a/board/dood/ec.tasklist b/board/dood/ec.tasklist
deleted file mode 100644
index d98db145e7..0000000000
--- a/board/dood/ec.tasklist
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, VENTI_TASK_STACK_SIZE)
diff --git a/board/dood/gpio.inc b/board/dood/gpio.inc
deleted file mode 100644
index 961acf8ee0..0000000000
--- a/board/dood/gpio.inc
+++ /dev/null
@@ -1,185 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* Wake Source interrupts */
-GPIO_INT(LID_OPEN,	 PIN(D, 2), GPIO_INT_BOTH |
-				    GPIO_HIB_WAKE_HIGH, lid_interrupt)
-GPIO_INT(POWER_BUTTON_L, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)	/* MECH_PWR_BTN_ODL */
-GPIO_INT(AC_PRESENT, 	 PIN(0, 0), GPIO_INT_BOTH |
-				    GPIO_HIB_WAKE_HIGH, extpower_interrupt)	/* ACOK_OD */
-
-/* USB-C interrupts */
-GPIO_INT(USB_C0_MUX_INT_ODL, PIN(6, 1), GPIO_INT_FALLING, tcpc_alert_event)
-GPIO_INT(USB_C1_MUX_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event)
-GPIO_INT(USB_PD_C0_INT_ODL,  PIN(E, 0), GPIO_INT_FALLING, ppc_interrupt)
-GPIO_INT(USB_PD_C1_INT_ODL,  PIN(F, 1), GPIO_INT_FALLING, ppc_interrupt)
-
-/* Power State interrupts */
-#ifdef CONFIG_POWER_S0IX
-GPIO_INT(PCH_SLP_S0_L,	 PIN(A, 4), GPIO_INT_BOTH, power_signal_interrupt)	/* SLP_S0_L */
-#endif
-GPIO_INT(PCH_SLP_S4_L,	 PIN(A, 3), GPIO_INT_BOTH, power_signal_interrupt)	/* SLP_S4_L */
-GPIO_INT(PCH_SLP_S3_L,	 PIN(A, 6), GPIO_INT_BOTH, power_signal_interrupt)	/* SLP_S3_L */
-GPIO_INT(SUSPWRDNACK,	 PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt)	/* SUSPWRDNACK */
-GPIO_INT(RSMRST_L_PGOOD, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt)	/* PMIC_EC_RSMRST_ODL */
-GPIO_INT(ALL_SYS_PGOOD,	 PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt)	/* PMIC_EC_PWROK_OD */
-
-/* Other interrupts */
-GPIO_INT(WP_L,			PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)            /* EC_WP_ODL */
-GPIO_INT(TABLET_MODE_L,         PIN(8, 6), GPIO_INT_BOTH, gmr_tablet_switch_isr)
-GPIO_INT(EC_VOLUP_BTN_ODL,	PIN(7, 5), GPIO_INT_BOTH, button_interrupt)
-GPIO_INT(EC_VOLDN_BTN_ODL,	PIN(4, 0), GPIO_INT_BOTH, button_interrupt)
-
-GPIO_INT(BASE_SIXAXIS_INT_L,	PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt)
-
-GPIO(LID_ACCEL_INT_L,		PIN(5, 0), GPIO_INPUT | GPIO_SEL_1P8V)
-
-/* Define PCH_SLP_S0_L after all interrupts if CONFIG_POWER_S0IX not defined. */
-#ifndef CONFIG_POWER_S0IX
-GPIO(PCH_SLP_S0_L,	 PIN(A, 4), GPIO_INPUT)		/* SLP_S0_L */
-#endif
-
-/*
- * PLT_RST_L isn't used since there is a Virtual Wire on eSPI for it. It is here
- * only for debugging purposes.
- */
-GPIO(PLT_RST_L,		 PIN(C, 7), GPIO_INPUT)		/* Platform Reset from SoC */
-GPIO(SYS_RESET_L,	 PIN(3, 4), GPIO_ODR_HIGH)	/* SYS_RST_ODL */
-GPIO(PCH_RTCRST,	 PIN(7, 6), GPIO_OUT_LOW)	/* EC_PCH_RTCRST */
-
-GPIO(ENTERING_RW,	 PIN(E, 1), GPIO_OUT_LOW)	/* EC_ENTERING_RW */
-GPIO(PCH_WAKE_L,	 PIN(7, 4), GPIO_ODR_HIGH)	/* EC_PCH_WAKE_ODL */
-GPIO(PCH_PWRBTN_L,	 PIN(C, 1), GPIO_ODR_HIGH)	/* EC_PCH_PWR_BTN_ODL */
-
-GPIO(EN_PP5000,		 PIN(7, 3), GPIO_OUT_LOW)	/* EN_PP5000_A */
-GPIO(PP5000_PG,		 PIN(C, 0), GPIO_INPUT)		/* PP5000_PG_OD */
-GPIO(EN_PP3300,		 PIN(D, 4), GPIO_OUT_LOW)	/* EN_PP3300_A */
-GPIO(PP3300_PG,		 PIN(6, 0), GPIO_INPUT)		/* PP3300_PG_OD */
-GPIO(PMIC_EN,		 PIN(7, 2), GPIO_OUT_LOW)	/* Enable A Rails via PMIC */
-GPIO(PCH_RSMRST_L,	 PIN(C, 2), GPIO_OUT_LOW)	/* RSMRST# to SOC. All _A rails now up. */
-GPIO(PCH_SYS_PWROK,	 PIN(B, 7), GPIO_OUT_LOW)	/* EC_PCH_PWROK. All S0 rails now up. */
-
-/* Peripheral rails */
-GPIO(ENABLE_BACKLIGHT,		PIN(D, 3), GPIO_ODR_HIGH |
-					   GPIO_SEL_1P8V)	/* EC_BL_EN_OD */
-GPIO(EN_P3300_TRACKPAD_ODL,	PIN(3, 3), GPIO_ODR_HIGH)
-
-GPIO(EC_BATT_PRES_L, 	 PIN(E, 5), GPIO_INPUT)
-
-/*
- * EC_RST_ODL acts as a wake source from PSL hibernate mode. However, it does
- * not need to be an interrupt for normal EC operations. Thus, configure it as
- * GPIO_INPUT with wake on low-to-high edge using GPIO_HIB_WAKE_HIGH so that PSL
- * common code can configure PSL_IN correctly.
- *
- * Reason for choosing low-to-high edge for waking from hibernate is to avoid
- * the double reset - one because of PSL_IN wake and other because of VCC1_RST
- * being asserted. Also, it should be fine to have the EC in hibernate when H1
- * or servo wants to hold the EC in reset since VCC1 will be down and so entire
- * EC logic (except PSL) as well as AP will be in reset.
- */
-GPIO(EC_RST_ODL,	PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH)
-
-/*
- * PCH_PROCHOT_ODL is primarily for monitoring the PROCHOT# signal which is
- * normally driven by the PMIC. The EC can also drive this signal in the event
- * that the ambient or charger temperature sensors exceeds their thresholds.
- */
-GPIO(CPU_PROCHOT,	 PIN(3, 7), GPIO_INPUT | GPIO_SEL_1P8V)	/* PCH_PROCHOT_ODL */
-
-/* I2C pins - Alternate function below configures I2C module on these pins */
-GPIO(I2C0_SCL,		 PIN(B, 5), GPIO_INPUT)		/* EC_I2C_BATTERY_3V3_SCL */
-GPIO(I2C0_SDA,		 PIN(B, 4), GPIO_INPUT)		/* EC_I2C_BATTERY_3V3_SDA */
-GPIO(I2C1_SCL,		 PIN(9, 0), GPIO_INPUT)		/* EC_I2C_USB_C0_MUX_SCL */
-GPIO(I2C1_SDA,		 PIN(8, 7), GPIO_INPUT)		/* EC_I2C_USB_C0_MUX_SDA */
-GPIO(I2C2_SCL,		 PIN(9, 2), GPIO_INPUT)		/* EC_I2C_USB_C1_MUX_SCL */
-GPIO(I2C2_SDA,		 PIN(9, 1), GPIO_INPUT)		/* EC_I2C_USB_C1_MUX_SDA */
-GPIO(I2C3_SCL,		 PIN(D, 1), GPIO_INPUT)		/* EC_I2C_EEPROM_SCL */
-GPIO(I2C3_SDA,		 PIN(D, 0), GPIO_INPUT)		/* EC_I2C_EEPROM_SDA */
-GPIO(I2C4_SCL,		 PIN(F, 3), GPIO_INPUT)		/* EC_I2C_CHARGER_3V3_SCL */
-GPIO(I2C4_SDA,		 PIN(F, 2), GPIO_INPUT)		/* EC_I2C_CHARGER_3V3_SDA */
-GPIO(I2C7_SCL,		 PIN(B, 3), GPIO_INPUT |
-				    GPIO_SEL_1P8V)	/* EC_I2C_SENSOR_U_SCL */
-GPIO(I2C7_SDA,		 PIN(B, 2), GPIO_INPUT |
-				    GPIO_SEL_1P8V)	/* EC_I2C_SENSOR_U_SDA */
-
-/* USB pins */
-GPIO(EN_USB_A0_5V,	 PIN(6, 7), GPIO_OUT_LOW)	/* Enable A0 5V Charging */
-GPIO(EN_USB_A1_5V,	 PIN(9, 6), GPIO_OUT_LOW)	/* Enable A1 5V Charging */
-GPIO(USB_A0_CHARGE_EN_L, PIN(A, 2), GPIO_OUT_HIGH)	/* Enable A0 1.5A Charging */
-GPIO(USB_A1_CHARGE_EN_L, PIN(A, 0), GPIO_OUT_HIGH)	/* Enable A1 1.5A Charging */
-GPIO(USB_C0_PD_RST,	 PIN(8, 3), GPIO_OUT_LOW)	/* C0 PD Reset */
-GPIO(USB_C0_BC12_VBUS_ON,   PIN(6, 3), GPIO_OUT_LOW)	/* C0 BC1.2 Power */
-GPIO(USB_C0_BC12_CHG_DET_L, PIN(9, 5), GPIO_INPUT)	/* C0 BC1.2 Detect */
-GPIO(USB_C0_HPD_1V8_ODL, PIN(C, 5), GPIO_INPUT |	/* C0 DP Hotplug Detect */
-				    GPIO_SEL_1P8V)
-GPIO(USB_C1_PD_RST_ODL,	 PIN(7, 0), GPIO_ODR_HIGH)	/* C1 PD Reset */
-GPIO(USB_C1_BC12_VBUS_ON,   PIN(B, 1), GPIO_OUT_LOW)	/* C1 BC1.2 Power */
-GPIO(USB_C1_BC12_CHG_DET_L, PIN(E, 4), GPIO_INPUT)	/* C1 BC1.2 Detect */
-GPIO(USB_C1_HPD_1V8_ODL, PIN(C, 6), GPIO_INPUT |	/* C1 DP Hotplug Detect */
-				    GPIO_SEL_1P8V)
-
-/* LED */
-GPIO(BAT_LED_AMBER_L,	 PIN(C, 3), GPIO_OUT_HIGH | GPIO_OPEN_DRAIN)	/* LED_1_L */
-GPIO(BAT_LED_WHITE_L,	 PIN(C, 4), GPIO_OUT_HIGH | GPIO_OPEN_DRAIN)	/* LED_2_L */
-GPIO(LED_3_L,		 PIN(D, 7), GPIO_OUT_HIGH)
-
-/* Keyboard Backlight */
-GPIO(KB_BL_PWR_EN,	PIN(6, 2), GPIO_OUT_LOW)
-
-/* MKBP event synchronization */
-GPIO(EC_INT_L,		PIN(9, 4), GPIO_ODR_HIGH)
-
-/* Overcurrent event to host */
-GPIO(USB_C_OC,      PIN(3, 6), GPIO_ODR_HIGH | GPIO_SEL_1P8V)
-
-/* Misc. */
-GPIO(CCD_MODE_EC_L,	PIN(E, 3), GPIO_INPUT)
-GPIO(TRACKPAD_INT_1V8_ODL, PIN(9, 3), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(PPC_ID,		PIN(9, 7), GPIO_INPUT | GPIO_PULL_DOWN)	/* PPC ID Pin */
-
-/* Unused Pins */
-GPIO(CHARGER_PMON,	PIN(4, 2), GPIO_INPUT)
-GPIO(CHARGER_IADP,	PIN(4, 3), GPIO_INPUT)
-GPIO(EC_GPIO57,		PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP)	/* TP Only */
-GPIO(EC_I2S_SFRM,	PIN(A, 5), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2S_SCLK,	PIN(A, 7), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2S_TX_PCH_RX,	PIN(B, 0), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(WFCAM_VSYNC,		PIN(0, 3), GPIO_INPUT | GPIO_PULL_DOWN)
-
-/* Keyboard pins */
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)	/* KSI_00-01 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)	/* KSI_02-07 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)	/* KSO_00-01 */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)	/* KSO_03-09 */
-ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)	/* KSO_10-13 */
-ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)	/* KSO_14 */
-
-GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW)	/* KSO_02 inverted */
-
-/* Alternate functions GPIO definitions */
-/* Cr50 requires no pull-ups on UART pins. */
-ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0)		/* UART from EC to Servo */
-ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0)		/* I2C0 */
-ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0)		/* I2C1 SCL / I2C2 */
-ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0)		/* I2C1 SDA */
-ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0)		/* I2C3 */
-ALTERNATE(PIN_MASK(F, 0x0C), 0, MODULE_I2C, 0)		/* I2C4 */
-ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, (GPIO_INPUT | GPIO_SEL_1P8V)) /* 1.8V I2C7 */
-ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0)		/* ADC0-1 */
-ALTERNATE(PIN_MASK(4, 0x02), 0, MODULE_ADC, 0)		/* ADC4 */
-ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0)		/* ADC9 */
-ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0)		/* PWM3: KB_BL_PWM */
-
-/* Power Switch Logic (PSL) inputs */
-ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0)		/* GPIOD2 = LID_OPEN */
-ALTERNATE(PIN_MASK(0, 0x07), 0, MODULE_PMU, 0)		/* GPIO00 = ACOK_OD,
-							   GPIO01 = MECH_PWR_BTN_ODL
-							   GPIO02 = EC_RST_ODL */
diff --git a/board/dood/led.c b/board/dood/led.c
deleted file mode 100644
index 966f3d7a72..0000000000
--- a/board/dood/led.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control for Dood
- */
-
-#include "ec_commands.h"
-#include "gpio.h"
-#include "led_common.h"
-#include "led_onoff_states.h"
-
-#define LED_OFF_LVL	1
-#define LED_ON_LVL	0
-
-__override const int led_charge_lvl_1;
-
-__override const int led_charge_lvl_2 = 100;
-
-/* Dood: Note there is only LED for charge / power */
-__override struct led_descriptor
-			led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
-	[STATE_CHARGING_LVL_2]	     = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
-	[STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_WHITE,  LED_INDEFINITE} },
-	[STATE_DISCHARGE_S0]	     = {{EC_LED_COLOR_WHITE,  LED_INDEFINITE} },
-	[STATE_DISCHARGE_S3]	     = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
-					{LED_OFF,            3 * LED_ONE_SEC} },
-	[STATE_DISCHARGE_S5]         = {{LED_OFF,            LED_INDEFINITE} },
-	[STATE_BATTERY_ERROR]        = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
-					{LED_OFF,            1 * LED_ONE_SEC} },
-	[STATE_FACTORY_TEST]         = {{EC_LED_COLOR_WHITE,  2 * LED_ONE_SEC},
-					{EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC} },
-};
-
-const enum ec_led_id supported_led_ids[] = { EC_LED_ID_BATTERY_LED };
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-__override void led_set_color_battery(enum ec_led_colors color)
-{
-	switch (color) {
-	case EC_LED_COLOR_WHITE:
-		gpio_set_level(GPIO_BAT_LED_WHITE_L, LED_ON_LVL);
-		gpio_set_level(GPIO_BAT_LED_AMBER_L, LED_OFF_LVL);
-		break;
-	case EC_LED_COLOR_AMBER:
-		gpio_set_level(GPIO_BAT_LED_WHITE_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_BAT_LED_AMBER_L, LED_ON_LVL);
-		break;
-	default: /* LED_OFF and other unsupported colors */
-		gpio_set_level(GPIO_BAT_LED_WHITE_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_BAT_LED_AMBER_L, LED_OFF_LVL);
-		break;
-	}
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	brightness_range[EC_LED_COLOR_WHITE] = 1;
-	brightness_range[EC_LED_COLOR_AMBER] = 1;
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	if (brightness[EC_LED_COLOR_WHITE] != 0)
-		led_set_color_battery(EC_LED_COLOR_WHITE);
-	else if (brightness[EC_LED_COLOR_AMBER] != 0)
-		led_set_color_battery(EC_LED_COLOR_AMBER);
-	else
-		led_set_color_battery(LED_OFF);
-
-	return EC_SUCCESS;
-}
-
diff --git a/board/dood/vif_override.xml b/board/dood/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/dood/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->