ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 539 deletions

diff --git a/board/dratini/board.c b/board/dratini/board.c
deleted file mode 100644
index 53fbe4b3d5..0000000000
--- a/board/dratini/board.c
+++ /dev/null
@@ -1,539 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Hatch board-specific configuration */
-
-#include "adc.h"
-#include "button.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/als_tcs3400.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "ec_commands.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "spi.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "thermal.h"
-#include "temp_sensor/thermistor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_pd.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-static void check_reboot_deferred(void);
-DECLARE_DEFERRED(check_reboot_deferred);
-
-/* GPIO to enable/disable the USB Type-A port. */
-const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = {
-	GPIO_EN_USB_A_5V,
-};
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_INT_ODL:
-		sn5s330_interrupt(0);
-		break;
-
-	case GPIO_USB_C1_PPC_INT_ODL:
-		sn5s330_interrupt(1);
-		break;
-
-	default:
-		break;
-	}
-}
-
-static void tcpc_alert_event(enum gpio_signal signal)
-{
-	int port = -1;
-
-	switch (signal) {
-	case GPIO_USB_C0_TCPC_INT_ODL:
-		port = 0;
-		break;
-	case GPIO_USB_C1_TCPC_INT_ODL:
-		port = 1;
-		break;
-	default:
-		return;
-	}
-
-	schedule_deferred_pd_interrupt(port);
-}
-
-static void control_mst_power(void)
-{
-	baseboard_mst_enable_control(MST_HDMI,
-				     gpio_get_level(GPIO_HDMI_CONN_HPD));
-}
-DECLARE_DEFERRED(control_mst_power);
-
-static void hdmi_hpd_interrupt(enum gpio_signal signal)
-{
-	/*
-	 * When the HPD goes high, enable the MST hub right away,
-	 * but debounce the low signal for 2 seconds to avoid transient low
-	 * pulses on the HPD signal.
-	 */
-	if (gpio_get_level(signal))
-		hook_call_deferred(&control_mst_power_data, 0);
-	else
-		hook_call_deferred(&control_mst_power_data, 2 * SECOND);
-}
-
-static void bc12_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-		break;
-
-	case GPIO_USB_C1_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-		break;
-
-	default:
-		break;
-	}
-}
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-/******************************************************************************/
-/* SPI devices */
-const struct spi_device_t spi_devices[] = {
-};
-const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
-
-/******************************************************************************/
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT]   = { .channel = 3, .flags = 0, .freq = 100 },
-	[PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN,
-			.freq = 25000},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/******************************************************************************/
-/* USB-C TPCP Configuration */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC0,
-			.addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS,
-		},
-		.drv = &anx7447_tcpm_drv,
-		.flags = TCPC_FLAGS_RESET_ACTIVE_HIGH,
-	},
-	[USB_PD_PORT_TCPC_1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC1,
-			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-		},
-		.drv = &ps8xxx_tcpm_drv,
-	},
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.usb_port = USB_PD_PORT_TCPC_0,
-		.driver = &anx7447_usb_mux_driver,
-		.hpd_update = &anx7447_tcpc_update_hpd_status,
-	},
-	[USB_PD_PORT_TCPC_1] = {
-		.usb_port = USB_PD_PORT_TCPC_1,
-		.driver = &tcpci_tcpm_usb_mux_driver,
-		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	}
-};
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.i2c_port = I2C_PORT_PPC0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-
-	[USB_PD_PORT_TCPC_1] = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-
-/******************************************************************************/
-/* Sensors */
-/* Base Sensor mutex */
-static struct mutex g_base_mutex;
-static struct mutex g_lid_mutex;
-
-/* Base accel private data */
-static struct bmi_drv_data_t g_bmi160_data;
-
-/* BMA255 private data */
-static struct accelgyro_saved_data_t g_bma255_data;
-
-/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t base_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-static const mat33_fp_t lid_standard_ref = {
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMA255,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &bma2x2_accel_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_bma255_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.min_frequency = BMA255_ACCEL_MIN_FREQ,
-		.max_frequency = BMA255_ACCEL_MAX_FREQ,
-		.default_range = 2, /* g, enough for lid angle calculation. */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_ACCEL_MIN_FREQ,
-		.max_frequency = BMI_ACCEL_MAX_FREQ,
-		.default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.default_range = 1000, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_GYRO_MIN_FREQ,
-		.max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-
-const struct fan_conf fan_conf_0 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = MFT_CH_0,	/* Use MFT id to control fan */
-	.pgood_gpio = -1,
-	.enable_gpio = GPIO_EN_PP5000_FAN,
-};
-
-/* Default */
-const struct fan_rpm fan_rpm_0 = {
-	.rpm_min = 2500,
-	.rpm_start = 2500,
-	.rpm_max = 6500,
-};
-
-const struct fan_t fans[FAN_CH_COUNT] = {
-	[FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, },
-};
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
-	[MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_1] = {
-		"TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_TEMP_SENSOR_2] = {
-		"TEMP_5V_REG", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_TEMP_SENSOR_3] = {
-		"TEMP_CPU", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_1] = {.name = "Charger",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_30k9_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_1},
-	[TEMP_SENSOR_2] = {.name = "5V Reg",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_30k9_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_2},
-	[TEMP_SENSOR_3] = {.name = "CPU",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_30k9_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_3},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-
-/* Dratini Temperature sensors */
-const static struct ec_thermal_config thermal_a = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(73),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-	.temp_fan_off = C_TO_K(40),
-	.temp_fan_max = C_TO_K(70),
-};
-
-const static struct ec_thermal_config thermal_b = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(68),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(70),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-	.temp_fan_off = C_TO_K(40),
-	.temp_fan_max = C_TO_K(55),
-};
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_fans(void)
-{
-	thermal_params[TEMP_SENSOR_1] = thermal_a;
-	thermal_params[TEMP_SENSOR_2] = thermal_b;
-}
-
-/*
- * Returns true for boards that are convertible into tablet mode, and
- * false for clamshells.
- */
-bool board_is_convertible(void)
-{
-	uint8_t sku_id = get_board_sku();
-
-	/*
-	 * Dragonair (SKU 21 ,22, 23 and 24) is a convertible.
-	 * Dratini is not.
-	 * Unprovisioned SKU 255.
-	 */
-	return sku_id == 21 || sku_id == 22 || sku_id == 23 ||
-		sku_id == 24 || sku_id == 255;
-}
-
-static void board_update_sensor_config_from_sku(void)
-{
-	if (board_is_convertible()) {
-		motion_sensor_count = ARRAY_SIZE(motion_sensors);
-		/* Enable gpio interrupt for base accelgyro sensor */
-		gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-	} else {
-		motion_sensor_count = 0;
-		gmr_tablet_switch_disable();
-		/* Base accel is not stuffed, don't allow line to float */
-		gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-}
-
-static void anx7447_set_aux_switch(void)
-{
-	const int port = USB_PD_PORT_TCPC_0;
-
-	/* Debounce */
-	if (gpio_get_level(GPIO_CCD_MODE_ODL))
-		return;
-
-	CPRINTS("C%d: AUX_SW_SEL=0x%x", port, 0xc);
-	if (tcpc_write(port, ANX7447_REG_TCPC_AUX_SWITCH, 0xc))
-		CPRINTS("C%d: Setting AUX_SW_SEL failed", port);
-}
-DECLARE_DEFERRED(anx7447_set_aux_switch);
-
-void ccd_mode_isr(enum gpio_signal signal)
-{
-	/* Wait 2 seconds until all mux setting is done by PD task */
-	hook_call_deferred(&anx7447_set_aux_switch_data, 2 * SECOND);
-}
-
-static void board_init(void)
-{
-	/* Initialize Fans */
-	setup_fans();
-
-	/*
-	 * If HDMI is plugged in at boot, the interrupt may have been missed,
-	 * so check if the MST hub needs to be powered now.
-	 */
-	control_mst_power();
-
-	/* Enable HDMI HPD interrupt. */
-	gpio_enable_interrupt(GPIO_HDMI_CONN_HPD);
-
-	/* Trigger once to set mux in case CCD cable is already connected. */
-	ccd_mode_isr(GPIO_CCD_MODE_ODL);
-	gpio_enable_interrupt(GPIO_CCD_MODE_ODL);
-
-	board_update_sensor_config_from_sku();
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* Check that port number is valid. */
-	if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
-		return;
-
-	/* Note that the level is inverted because the pin is active low. */
-	gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented);
-}
-
-bool board_has_kb_backlight(void)
-{
-	uint8_t sku_id = get_board_sku();
-	/*
-	 * SKUs have keyboard backlight.
-	 * Dratini: 2, 3, 5, 8
-	 * Dragonair: 22, 24
-	 * Unprovisioned: 255
-	 */
-	return sku_id == 2 || sku_id == 3 || sku_id == 5 || sku_id == 8 ||
-		sku_id == 22 || sku_id == 24 || sku_id == 255;
-}
-
-__override uint32_t board_override_feature_flags0(uint32_t flags0)
-{
-	if (board_has_kb_backlight())
-		return flags0;
-	else
-		return (flags0 & ~EC_FEATURE_MASK_0(EC_FEATURE_PWM_KEYB));
-}
-
-#ifdef CONFIG_KEYBOARD_FACTORY_TEST
-/*
- * Map keyboard connector pins to EC GPIO pins for factory test.
- * Pins mapped to {-1, -1} are skipped.
- * The connector has 24 pins total, and there is no pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
-		{-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6},
-		{0, 7}, {1, 4}, {1, 3}, {1, 6}, {1, 7},
-		{3, 1}, {2, 0}, {1, 5}, {2, 6}, {2, 7},
-		{2, 1}, {2, 4}, {2, 5}, {1, 2}, {2, 3},
-		{2, 2}, {3, 0}, {-1, -1}, {-1, -1}, {-1, -1},
-};
-
-const int keyboard_factory_scan_pins_used =
-			ARRAY_SIZE(keyboard_factory_scan_pins);
-#endif
-
-/* Disable HDMI power while AP is suspended / off */
-static void disable_hdmi(void)
-{
-	gpio_set_level(GPIO_EN_HDMI, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, disable_hdmi, HOOK_PRIO_DEFAULT);
-DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, disable_hdmi, HOOK_PRIO_DEFAULT);
-
-/* Enable HDMI power while AP is active */
-static void enable_hdmi(void)
-{
-	gpio_set_level(GPIO_EN_HDMI, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, enable_hdmi, HOOK_PRIO_DEFAULT);
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP, enable_hdmi, HOOK_PRIO_DEFAULT);
-
-void all_sys_pgood_check_reboot(void)
-{
-	hook_call_deferred(&check_reboot_deferred_data, 3000 * MSEC);
-}
-
-__override void board_chipset_forced_shutdown(void)
-{
-	hook_call_deferred(&check_reboot_deferred_data, -1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_forced_shutdown,
-	HOOK_PRIO_DEFAULT);
-
-static void check_reboot_deferred(void)
-{
-	if (!gpio_get_level(GPIO_PG_EC_ALL_SYS_PWRGD))
-		system_reset(SYSTEM_RESET_MANUALLY_TRIGGERED);
-}