ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 981 deletions

diff --git a/board/eve/board.c b/board/eve/board.c
deleted file mode 100644
index f73118e8f2..0000000000
--- a/board/eve/board.c
+++ /dev/null
@@ -1,981 +0,0 @@
-/* Copyright 2016 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Eve board-specific configuration */
-
-#include "acpi.h"
-#include "bd99992gw.h"
-#include "board_config.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "charge_ramp.h"
-#include "charger.h"
-#include "chipset.h"
-#include "console.h"
-#include "device_event.h"
-#include "driver/accel_kionix.h"
-#include "driver/accel_kxcj9.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/als_si114x.h"
-#include "driver/charger/bd9995x.h"
-#include "driver/tcpm/anx74xx.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/tcpm/tcpm.h"
-#include "driver/temp_sensor/bd99992gw.h"
-#include "extpower.h"
-#include "gesture.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "i2c.h"
-#include "keyboard_scan.h"
-#include "keyboard_8042_sharedlib.h"
-#include "lid_angle.h"
-#include "lid_switch.h"
-#include "math_util.h"
-#include "motion_lid.h"
-#include "motion_sense.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "spi.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "timer.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-#include "util.h"
-#include "espi.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-static void tcpc_alert_event(enum gpio_signal signal)
-{
-	int port = -1;
-
-	switch (signal) {
-	case GPIO_USB_C0_PD_INT_ODL:
-		port = 0;
-		break;
-	case GPIO_USB_C1_PD_INT_ODL:
-		port = 1;
-		break;
-	default:
-		return;
-	}
-
-	schedule_deferred_pd_interrupt(port);
-}
-
-/*
- * enable_input_devices() is called by the tablet_mode ISR, but changes the
- * state of GPIOs, so its definition must reside after including gpio_list.
- */
-static void enable_input_devices(void);
-DECLARE_DEFERRED(enable_input_devices);
-
-#define LID_DEBOUNCE_US	(30 * MSEC)
-void tablet_mode_interrupt(enum gpio_signal signal)
-{
-	hook_call_deferred(&enable_input_devices_data, LID_DEBOUNCE_US);
-}
-
-/* Send event to wake AP based on trackpad input */
-void trackpad_interrupt(enum gpio_signal signal)
-{
-	device_set_single_event(EC_DEVICE_EVENT_TRACKPAD);
-}
-
-/* Send event to wake AP based on DSP interrupt */
-void dsp_interrupt(enum gpio_signal signal)
-{
-	device_set_single_event(EC_DEVICE_EVENT_DSP);
-}
-
-#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
-static void anx74xx_c0_cable_det_handler(void)
-{
-	int cable_det = gpio_get_level(GPIO_USB_C0_CABLE_DET);
-	int reset_n = gpio_get_level(GPIO_USB_C0_PD_RST_L);
-
-	/*
-	 * A cable_det low->high transition was detected. If following the
-	 * debounce time, cable_det is high, and reset_n is low, then ANX3429 is
-	 * currently in standby mode and needs to be woken up. Set the
-	 * TCPC_RESET event which will bring the ANX3429 out of standby
-	 * mode. Setting this event is gated on reset_n being low because the
-	 * ANX3429 will always set cable_det when transitioning to normal mode
-	 * and if in normal mode, then there is no need to trigger a tcpc reset.
-	 */
-	if (cable_det && !reset_n)
-		task_set_event(TASK_ID_PD_C0, PD_EVENT_TCPC_RESET);
-}
-DECLARE_DEFERRED(anx74xx_c0_cable_det_handler);
-
-static void anx74xx_c1_cable_det_handler(void)
-{
-	int cable_det = gpio_get_level(GPIO_USB_C1_CABLE_DET);
-	int reset_n = gpio_get_level(GPIO_USB_C1_PD_RST_L);
-
-	/*
-	 * A cable_det low->high transition was detected. If following the
-	 * debounce time, cable_det is high, and reset_n is low, then ANX3429 is
-	 * currently in standby mode and needs to be woken up. Set the
-	 * TCPC_RESET event which will bring the ANX3429 out of standby
-	 * mode. Setting this event is gated on reset_n being low because the
-	 * ANX3429 will always set cable_det when transitioning to normal mode
-	 * and if in normal mode, then there is no need to trigger a tcpc reset.
-	 */
-	if (cable_det && !reset_n)
-		task_set_event(TASK_ID_PD_C1, PD_EVENT_TCPC_RESET);
-}
-DECLARE_DEFERRED(anx74xx_c1_cable_det_handler);
-
-void anx74xx_cable_det_interrupt(enum gpio_signal signal)
-{
-	/* Check if it is port 0 or 1, and debounce for 2 msec. */
-	if (signal == GPIO_USB_C0_CABLE_DET)
-		hook_call_deferred(&anx74xx_c0_cable_det_handler_data,
-				   (2 * MSEC));
-	else
-		hook_call_deferred(&anx74xx_c1_cable_det_handler_data,
-				   (2 * MSEC));
-}
-#endif
-
-#include "gpio_list.h"
-
-/* Keyboard scan. Increase output_settle_us to 80us from default 50us. */
-__override struct keyboard_scan_config keyscan_config = {
-	.output_settle_us = 80,
-	.debounce_down_us = 9 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-	.actual_key_mask = {
-		0x3c, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
-	},
-};
-
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT]     = { 5, 0, 10000 },
-	[PWM_CH_LED_L_RED]   = { 2, PWM_CONFIG_DSLEEP, 100 },
-	[PWM_CH_LED_L_GREEN] = { 3, PWM_CONFIG_DSLEEP, 100 },
-	[PWM_CH_LED_L_BLUE]  = { 4, PWM_CONFIG_DSLEEP, 100 },
-	[PWM_CH_LED_R_RED]   = { 1, PWM_CONFIG_DSLEEP, 100 },
-	[PWM_CH_LED_R_GREEN] = { 0, PWM_CONFIG_DSLEEP, 100 },
-	[PWM_CH_LED_R_BLUE]  = { 6, PWM_CONFIG_DSLEEP, 100 },
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/* Hibernate wake configuration */
-const enum gpio_signal hibernate_wake_pins[] = {
-	GPIO_AC_PRESENT,
-	GPIO_LID_OPEN,
-	GPIO_POWER_BUTTON_L,
-};
-const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins);
-
-/* I2C port map */
-const struct i2c_port_t i2c_ports[]  = {
-	{"tcpc0",     I2C_PORT_TCPC0,    400, GPIO_I2C0_0_SCL, GPIO_I2C0_0_SDA},
-	{"tcpc1",     I2C_PORT_TCPC1,    400, GPIO_I2C0_1_SCL, GPIO_I2C0_1_SDA},
-	{"accelgyro", I2C_PORT_GYRO,     400, GPIO_I2C1_SCL,   GPIO_I2C1_SDA},
-	{"sensors",   I2C_PORT_LID_ACCEL, 400, GPIO_I2C2_SCL,  GPIO_I2C2_SDA},
-	{"batt",      I2C_PORT_BATTERY,  100, GPIO_I2C3_SCL,   GPIO_I2C3_SDA},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* TCPC mux configuration */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC0,
-			.addr_flags = ANX74XX_I2C_ADDR1_FLAGS,
-		},
-		.drv = &anx74xx_tcpm_drv,
-	},
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC1,
-			.addr_flags = ANX74XX_I2C_ADDR1_FLAGS,
-		},
-		.drv = &anx74xx_tcpm_drv,
-	},
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.driver = &anx74xx_tcpm_usb_mux_driver,
-		.hpd_update = &anx74xx_tcpc_update_hpd_status,
-	},
-	{
-		.usb_port = 1,
-		.driver = &anx74xx_tcpm_usb_mux_driver,
-		.hpd_update = &anx74xx_tcpc_update_hpd_status,
-	},
-};
-
-const struct charger_config_t chg_chips[] = {
-	{
-		.i2c_port = I2C_PORT_CHARGER,
-		.i2c_addr_flags = BD9995X_ADDR_FLAGS,
-		.drv = &bd9995x_drv,
-	},
-};
-
-/**
- * Power on (or off) a single TCPC.
- * minimum on/off delays are included.
- *
- * @param port	Port number of TCPC.
- * @param mode	0: power off, 1: power on.
- */
-void board_set_tcpc_power_mode(int port, int mode)
-{
-	switch (port) {
-	case 0:
-		if (mode) {
-			gpio_set_level(GPIO_USB_C0_TCPC_PWR, 1);
-			msleep(ANX74XX_PWR_H_RST_H_DELAY_MS);
-			gpio_set_level(GPIO_USB_C0_PD_RST_L, 1);
-		} else {
-			gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
-			msleep(ANX74XX_RST_L_PWR_L_DELAY_MS);
-			gpio_set_level(GPIO_USB_C0_TCPC_PWR, 0);
-			msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
-		}
-		break;
-	case 1:
-		if (mode) {
-			gpio_set_level(GPIO_USB_C1_TCPC_PWR, 1);
-			msleep(ANX74XX_PWR_H_RST_H_DELAY_MS);
-			gpio_set_level(GPIO_USB_C1_PD_RST_L, 1);
-		} else {
-			gpio_set_level(GPIO_USB_C1_PD_RST_L, 0);
-			msleep(ANX74XX_RST_L_PWR_L_DELAY_MS);
-			gpio_set_level(GPIO_USB_C1_TCPC_PWR, 0);
-			msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
-		}
-		break;
-	}
-}
-
-void board_reset_pd_mcu(void)
-{
-	/* Assert reset */
-	gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
-	gpio_set_level(GPIO_USB_C1_PD_RST_L, 0);
-	msleep(ANX74XX_RST_L_PWR_L_DELAY_MS);
-	/* Disable power */
-	gpio_set_level(GPIO_USB_C0_TCPC_PWR, 0);
-	gpio_set_level(GPIO_USB_C1_TCPC_PWR, 0);
-	msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
-	/* Enable power */
-	gpio_set_level(GPIO_USB_C0_TCPC_PWR, 1);
-	gpio_set_level(GPIO_USB_C1_TCPC_PWR, 1);
-	msleep(ANX74XX_PWR_H_RST_H_DELAY_MS);
-	/* Deassert reset */
-	gpio_set_level(GPIO_USB_C0_PD_RST_L, 1);
-	gpio_set_level(GPIO_USB_C1_PD_RST_L, 1);
-}
-
-void board_tcpc_init(void)
-{
-	int count = 0;
-	int port;
-
-	/* Wait for disconnected battery to wake up */
-	while (battery_hw_present() == BP_YES &&
-	       battery_is_present() == BP_NO) {
-		usleep(100 * MSEC);
-		/* Give up waiting after 2 seconds */
-		if (++count > 20)
-			break;
-	}
-
-	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_late())
-		board_reset_pd_mcu();
-
-	/* Enable TCPC interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL);
-
-#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
-	/* Enable CABLE_DET interrupt for ANX3429 wake from standby */
-	gpio_enable_interrupt(GPIO_USB_C0_CABLE_DET);
-	gpio_enable_interrupt(GPIO_USB_C1_CABLE_DET);
-#endif
-
-	/*
-	 * Initialize HPD to low; after sysjump SOC needs to see
-	 * HPD pulse to enable video path
-	 */
-	for (port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port)
-		usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED |
-					 USB_PD_MUX_HPD_IRQ_DEASSERTED);
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) {
-		if (gpio_get_level(GPIO_USB_C0_PD_RST_L))
-			status |= PD_STATUS_TCPC_ALERT_0;
-	}
-
-	if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL)) {
-		if (gpio_get_level(GPIO_USB_C1_PD_RST_L))
-			status |= PD_STATUS_TCPC_ALERT_1;
-	}
-
-	return status;
-}
-
-const struct temp_sensor_t temp_sensors[] = {
-	{"Battery", TEMP_SENSOR_TYPE_BATTERY, charge_get_battery_temp, 0},
-
-	/* These BD99992GW temp sensors are only readable in S0 */
-	{"Ambient", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val,
-	 BD99992GW_ADC_CHANNEL_SYSTHERM0},
-	{"Charger", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val,
-	 BD99992GW_ADC_CHANNEL_SYSTHERM1},
-	{"DRAM", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val,
-	 BD99992GW_ADC_CHANNEL_SYSTHERM2},
-	{"eMMC", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val,
-	 BD99992GW_ADC_CHANNEL_SYSTHERM3},
-	{"Gyro", TEMP_SENSOR_TYPE_BOARD, bmi160_get_sensor_temp, BASE_GYRO},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/*
- * Check if PMIC fault registers indicate VR fault. If yes, print out fault
- * register info to console. Additionally, set panic reason so that the OS can
- * check for fault register info by looking at offset 0x14(PWRSTAT1) and
- * 0x15(PWRSTAT2) in cros ec panicinfo.
- */
-static void board_report_pmic_fault(const char *str)
-{
-	int vrfault, pwrstat1 = 0, pwrstat2 = 0;
-	uint32_t info;
-
-	/* RESETIRQ1 -- Bit 4: VRFAULT */
-	if (i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x8, &vrfault)
-	    != EC_SUCCESS)
-		return;
-
-	if (!(vrfault & BIT(4)))
-		return;
-
-	/* VRFAULT has occurred, print VRFAULT status bits. */
-
-	/* PWRSTAT1 */
-	i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x16, &pwrstat1);
-
-	/* PWRSTAT2 */
-	i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x17, &pwrstat2);
-
-	CPRINTS("PMIC VRFAULT: %s", str);
-	CPRINTS("PMIC VRFAULT: PWRSTAT1=0x%02x PWRSTAT2=0x%02x", pwrstat1,
-		pwrstat2);
-
-	/* Clear all faults -- Write 1 to clear. */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x8, BIT(4));
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x16, pwrstat1);
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x17, pwrstat2);
-
-	/*
-	 * Status of the fault registers can be checked in the OS by looking at
-	 * offset 0x14(PWRSTAT1) and 0x15(PWRSTAT2) in cros ec panicinfo.
-	 */
-	info = ((pwrstat2 & 0xFF) << 8) | (pwrstat1 & 0xFF);
-	panic_set_reason(PANIC_SW_PMIC_FAULT, info, 0);
-}
-
-static void board_pmic_init(void)
-{
-	board_report_pmic_fault("SYSJUMP");
-
-	/* Clear power source events */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x04, 0xff);
-
-	/* Disable power button shutdown timer */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x14, 0x00);
-
-	/* Disable VCCIO in ALL_SYS_PWRGD for early boards */
-	if (board_get_version() <= BOARD_VERSION_DVTB)
-		i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x18, 0x80);
-
-	if (system_jumped_late())
-		return;
-
-	/* DISCHGCNT2 - enable 100 ohm discharge on V3.3A and V1.8A */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3d, 0x05);
-
-	/* DISCHGCNT3 - enable 100 ohm discharge on V1.00A */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3e, 0x04);
-
-	/* Set CSDECAYEN / VCCIO decays to 0V at assertion of SLP_S0# */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x30, 0x7a);
-
-	/*
-	 * Set V100ACNT / V1.00A Control Register:
-	 * Nominal output = 1.0V.
-	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x37, 0x1a);
-
-	/*
-	 * Set V085ACNT / V0.85A Control Register:
-	 * Lower power mode = 0.7V.
-	 * Nominal output = 1.0V.
-	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x38, 0x7a);
-
-	/* VRMODECTRL - disable low-power mode for all rails */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3b, 0x1f);
-}
-DECLARE_DEFERRED(board_pmic_init);
-
-static void board_set_tablet_mode(void)
-{
-	int flipped_360_mode = !gpio_get_level(GPIO_TABLET_MODE_L);
-
-	tablet_set_mode(flipped_360_mode, TABLET_TRIGGER_LID);
-
-	/* Update DPTF profile based on mode */
-	if (flipped_360_mode)
-		acpi_dptf_set_profile_num(DPTF_PROFILE_FLIPPED_360_MODE);
-	else
-		acpi_dptf_set_profile_num(DPTF_PROFILE_CLAMSHELL);
-}
-
-int board_has_working_reset_flags(void)
-{
-	int version = board_get_version();
-
-	/* board version P1b to EVTb will lose reset flags on power cycle */
-	if (version >= BOARD_VERSION_P1B && version <= BOARD_VERSION_EVTB)
-		return 0;
-
-	/* All other board versions should have working reset flags */
-	return 1;
-}
-
-/* Initialize board. */
-static void board_init(void)
-{
-	/* Enabure tablet mode is initialized */
-	board_set_tablet_mode();
-
-	/* Enable tablet mode interrupt for input device enable */
-	gpio_enable_interrupt(GPIO_TABLET_MODE_L);
-
-	/* Enable charger interrupts */
-	gpio_enable_interrupt(GPIO_CHARGER_INT_L);
-
-	/* Enable interrupts from BMI160 sensor. */
-	gpio_enable_interrupt(GPIO_ACCELGYRO3_INT_L);
-
-	/* Provide AC status to the PCH */
-	gpio_set_level(GPIO_PCH_ACOK, extpower_is_present());
-
-#ifndef TEST_BUILD
-	if (board_get_version() == BOARD_VERSION_EVT) {
-		/* Set F13 to new defined key on EVT */
-		CPRINTS("Overriding F13 scan code");
-		set_scancode_set2(3, 9, 0xe007);
-#ifdef CONFIG_KEYBOARD_DEBUG
-		set_keycap_label(3, 9, KLLI_F13);
-#endif
-	}
-#endif
-
-	/* Initialize PMIC */
-	hook_call_deferred(&board_pmic_init_data, 0);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-__override enum pd_dual_role_states pd_get_drp_state_in_suspend(void)
-{
-	/*
-	 * If board is not connected to charger it will disable VBUS
-	 * on all ports that acts as source when going to suspend.
-	 * Change DRP state to force sink, to inform TCPM about that.
-	 */
-	if (!extpower_is_present())
-		return PD_DRP_FORCE_SINK;
-
-	return PD_DRP_TOGGLE_OFF;
-}
-
-/**
- * Buffer the AC present GPIO to the PCH.
- * Set appropriate DRP state when chipset in suspend
- */
-static void board_extpower(void)
-{
-	enum pd_dual_role_states drp_state;
-	int port;
-
-	gpio_set_level(GPIO_PCH_ACOK, extpower_is_present());
-
-	if (chipset_in_or_transitioning_to_state(CHIPSET_STATE_SUSPEND)) {
-		drp_state = pd_get_drp_state_in_suspend();
-		for (port = 0; port < board_get_usb_pd_port_count(); port++)
-			if (pd_get_dual_role(port) != drp_state)
-				pd_set_dual_role(port, drp_state);
-	}
-}
-DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT);
-
-int pd_snk_is_vbus_provided(int port)
-{
-	if (port != 0 && port != 1)
-		panic("Invalid charge port\n");
-
-	return bd9995x_is_vbus_provided(port);
-}
-
-/**
- * Set active charge port -- only one port can be active at a time.
- *
- * @param charge_port   Charge port to enable.
- *
- * Returns EC_SUCCESS if charge port is accepted and made active,
- * EC_ERROR_* otherwise.
- */
-int board_set_active_charge_port(int charge_port)
-{
-	enum bd9995x_charge_port bd9995x_port;
-	int bd9995x_port_select = 1;
-
-	switch (charge_port) {
-	case 0:
-	case 1:
-		/* Don't charge from a source port */
-		if (board_vbus_source_enabled(charge_port))
-			return -1;
-
-		bd9995x_port = charge_port;
-		break;
-	case CHARGE_PORT_NONE:
-		bd9995x_port_select = 0;
-		bd9995x_port = BD9995X_CHARGE_PORT_BOTH;
-
-		/*
-		 * To avoid inrush current from the external charger,
-		 * enable discharge on AC until the new charger is detected
-		 * and charge detect delay has passed.
-		 */
-		if (charge_get_percent() > 2)
-			charger_discharge_on_ac(1);
-		break;
-	default:
-		panic("Invalid charge port\n");
-		break;
-	}
-
-	CPRINTS("New chg p%d", charge_port);
-
-	return bd9995x_select_input_port(bd9995x_port, bd9995x_port_select);
-}
-
-/**
- * Set the charge limit based upon desired maximum.
- *
- * @param port          Port number.
- * @param supplier      Charge supplier type.
- * @param charge_ma     Desired charge limit (mA).
- * @param charge_mv     Negotiated charge voltage (mV).
- */
-void board_set_charge_limit(int port, int supplier, int charge_ma,
-			    int max_ma, int charge_mv)
-{
-	/* Enable charging trigger by BC1.2 detection */
-	int bc12_enable = (supplier == CHARGE_SUPPLIER_BC12_CDP ||
-			   supplier == CHARGE_SUPPLIER_BC12_DCP ||
-			   supplier == CHARGE_SUPPLIER_BC12_SDP ||
-			   supplier == CHARGE_SUPPLIER_OTHER);
-
-	if (bd9995x_bc12_enable_charging(port, bc12_enable))
-		return;
-
-	charge_ma = (charge_ma * 95) / 100;
-	charge_set_input_current_limit(MAX(charge_ma,
-				   CONFIG_CHARGER_INPUT_CURRENT), charge_mv);
-}
-
-/**
- * Return if VBUS is sagging too low
- */
-int board_is_vbus_too_low(int port, enum chg_ramp_vbus_state ramp_state)
-{
-	int voltage;
-
-	if (charger_get_vbus_voltage(port, &voltage))
-		voltage = 0;
-
-	return voltage < BD9995X_BC12_MIN_VOLTAGE;
-}
-
-/* Clear pending interrupts and enable DSP for wake */
-static void dsp_wake_enable(int enable)
-{
-	if (enable) {
-		gpio_clear_pending_interrupt(GPIO_MIC_DSP_IRQ_1V8_L);
-		gpio_enable_interrupt(GPIO_MIC_DSP_IRQ_1V8_L);
-	} else {
-		gpio_disable_interrupt(GPIO_MIC_DSP_IRQ_1V8_L);
-	}
-}
-
-/* Clear pending interrupts and enable trackpad for wake */
-static void trackpad_wake_enable(int enable)
-{
-	static int prev_enable = -1;
-
-	if (prev_enable == enable)
-		return;
-	prev_enable = enable;
-
-	if (enable) {
-		gpio_clear_pending_interrupt(GPIO_TRACKPAD_INT_L);
-		gpio_enable_interrupt(GPIO_TRACKPAD_INT_L);
-	} else {
-		gpio_disable_interrupt(GPIO_TRACKPAD_INT_L);
-	}
-}
-
-/* Enable or disable input devices, based upon chipset state and tablet mode */
-static void enable_input_devices(void)
-{
-	/* We need to turn on tablet mode for motion sense */
-	board_set_tablet_mode();
-
-	/*
-	 * Then, we disable peripherals only when the lid reaches 360 position.
-	 * (It's probably already disabled by motion_sense_task.)
-	 * We deliberately do not enable peripherals when the lid is leaving
-	 * 360 position. Instead, we let motion_sense_task enable it once it
-	 * reaches laptop zone (180 or less).
-	 */
-	if (tablet_get_mode())
-		lid_angle_peripheral_enable(0);
-}
-
-/* Enable or disable input devices, based on chipset state and tablet mode */
-__override void lid_angle_peripheral_enable(int enable)
-{
-	/*
-	 * If suspended and the lid is in 360 position, ignore the lid angle,
-	 * which might be faulty. Disable keyboard and trackpad wake.
-	 */
-	if (chipset_in_state(CHIPSET_STATE_ANY_OFF) ||
-	   (tablet_get_mode() && chipset_in_state(CHIPSET_STATE_SUSPEND)))
-		enable = 0;
-	keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE);
-
-	/* Also disable trackpad wake if not in suspend */
-	if (!chipset_in_state(CHIPSET_STATE_SUSPEND))
-		enable = 0;
-	trackpad_wake_enable(enable);
-}
-
-/* Called on AP S5 -> S3 transition */
-static void board_chipset_startup(void)
-{
-	/* Enable Trackpad */
-	gpio_set_level(GPIO_TRACKPAD_SHDN_L, 1);
-	hook_call_deferred(&enable_input_devices_data, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S3 -> S5 transition */
-static void board_chipset_shutdown(void)
-{
-	/* Disable Trackpad and DSP wake in S5 */
-	trackpad_wake_enable(0);
-	dsp_wake_enable(0);
-	gpio_set_level(GPIO_TRACKPAD_SHDN_L, 0);
-	hook_call_deferred(&enable_input_devices_data, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S0 -> S3 transition */
-static void board_chipset_suspend(void)
-{
-	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 0);
-	if (lid_is_open()) {
-		/* Enable DSP wake if suspended with lid open */
-		dsp_wake_enable(1);
-
-		/* Enable trackpad wake if suspended and not in tablet mode */
-		if (!tablet_get_mode())
-			trackpad_wake_enable(1);
-	}
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S3 -> S0 transition */
-static void board_chipset_resume(void)
-{
-	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 1);
-	dsp_wake_enable(0);
-	trackpad_wake_enable(0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);
-
-static void board_chipset_reset(void)
-{
-	board_report_pmic_fault("CHIPSET RESET");
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESET, board_chipset_reset, HOOK_PRIO_DEFAULT);
-
-/* Called on lid change */
-static void board_lid_change(void)
-{
-	/* Disable trackpad and DSP wake if lid is closed */
-	if (!lid_is_open()) {
-		trackpad_wake_enable(0);
-		dsp_wake_enable(0);
-	}
-}
-DECLARE_HOOK(HOOK_LID_CHANGE, board_lid_change, HOOK_PRIO_DEFAULT);
-
-void board_hibernate(void)
-{
-	/* Enable both the VBUS & VCC ports before entering PG3 */
-	bd9995x_select_input_port(BD9995X_CHARGE_PORT_BOTH, 1);
-
-	/* Turn BGATE OFF for power saving */
-	bd9995x_set_power_save_mode(BD9995X_PWR_SAVE_MAX);
-
-	/* Shut down PMIC */
-	CPRINTS("Triggering PMIC shutdown");
-	uart_flush_output();
-	if (i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x49, 0x01)) {
-		/*
-		 * If we can't tell the PMIC to shutdown, instead reset
-		 * and don't start the AP. Hopefully we'll be able to
-		 * communicate with the PMIC next time.
-		 */
-		CPRINTS("PMIC I2C failed");
-		uart_flush_output();
-		system_reset(SYSTEM_RESET_LEAVE_AP_OFF);
-	}
-	while (1)
-		;
-}
-
-int board_get_version(void)
-{
-	static int ver;
-
-	if (!ver) {
-		/*
-		 * Read the board EC ID on the tristate strappings
-		 * using ternary encoding: 0 = 0, 1 = 1, Hi-Z = 2
-		 */
-		uint8_t id0, id1, id2;
-
-		id0 = gpio_get_ternary(GPIO_BOARD_VERSION1);
-		id1 = gpio_get_ternary(GPIO_BOARD_VERSION2);
-		id2 = gpio_get_ternary(GPIO_BOARD_VERSION3);
-
-		ver = (id2 * 9) + (id1 * 3) + id0;
-		CPRINTS("Board ID = %d", ver);
-	}
-
-	return ver;
-}
-
-void sensor_board_proc_double_tap(void)
-{
-	led_register_double_tap();
-}
-
-/* Base Sensor mutex */
-static struct mutex g_base_mutex;
-
-/* Lid Sensor mutex */
-static struct mutex g_lid_mutex;
-
-static struct kionix_accel_data g_kxcj9_data;
-static struct bmi_drv_data_t g_bmi160_data;
-
-static struct si114x_drv_data_t g_si114x_data = {
-	.state = SI114X_NOT_READY,
-	.covered = 0,
-	.type_data = {
-		/* Proximity - unused */
-		{
-		},
-		/* light */
-		{
-			.base_data_reg = SI114X_ALS_VIS_DATA0,
-			.irq_flags = SI114X_IRQ_ENABLE_ALS_IE_INT0 |
-				     SI114X_IRQ_ENABLE_ALS_IE_INT1,
-			.scale = 1,
-			.offset = -256,
-		}
-	}
-};
-
-/* Matrix to rotate accelrator into standard reference frame */
-const mat33_fp_t mag_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0,  FLOAT_TO_FP(1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-const mat33_fp_t lid_standard_ref = {
-	{FLOAT_TO_FP(-1),  0,  0},
-	{ 0,  FLOAT_TO_FP(-1), 0},
-	{ 0,  0, FLOAT_TO_FP(1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-	 .name = "Lid Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_KXCJ9,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_LID,
-	 .drv = &kionix_accel_drv,
-	 .mutex = &g_lid_mutex,
-	 .drv_data = &g_kxcj9_data,
-	 .port = I2C_PORT_LID_ACCEL,
-	 .i2c_spi_addr_flags = KXCJ9_ADDR0_FLAGS,
-	 .rot_standard_ref = &lid_standard_ref,
-	 .default_range = 2, /* g, enough for lid angle calculation. */
-	 .min_frequency = KXCJ9_ACCEL_MIN_FREQ,
-	 .max_frequency = KXCJ9_ACCEL_MAX_FREQ,
-	 .config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		 /* Sensor on for lid angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	 },
-	},
-
-	[BASE_ACCEL] = {
-	 .name = "Base Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_GYRO,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .rot_standard_ref = NULL,
-	 .default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-	 .min_frequency = BMI_ACCEL_MIN_FREQ,
-	 .max_frequency = BMI_ACCEL_MAX_FREQ,
-	 .config = {
-		 /* EC use accel for angle detection */
-		 [SENSOR_CONFIG_EC_S0] = {
-			.odr = TAP_ODR,
-			.ec_rate = 100 * MSEC,
-		 },
-		 /* Sensor on for lid angle detection */
-		 [SENSOR_CONFIG_EC_S3] = {
-			.odr = TAP_ODR,
-			.ec_rate = 100 * MSEC,
-		 },
-		 /* Sensor on in S5 for battery detection */
-		 [SENSOR_CONFIG_EC_S5] = {
-			.odr = TAP_ODR,
-			.ec_rate = 100 * MSEC,
-		 },
-	 },
-	},
-
-	[BASE_GYRO] = {
-	 .name = "Base Gyro",
-	 .active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_GYRO,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_GYRO,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .default_range = 1000, /* dps */
-	 .rot_standard_ref = NULL,
-	 .min_frequency = BMI_GYRO_MIN_FREQ,
-	 .max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-
-	[BASE_MAG] = {
-	 .name = "Base Mag",
-	 .active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_MAG,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_GYRO,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .default_range = BIT(11), /* 16LSB / uT, fixed */
-	 .rot_standard_ref = &mag_standard_ref,
-	 .min_frequency = BMM150_MAG_MIN_FREQ,
-	 .max_frequency = BMM150_MAG_MAX_FREQ(SPECIAL),
-	},
-
-	[LID_LIGHT] = {
-	 .name = "Light",
-	 .active_mask = SENSOR_ACTIVE_S0,
-	 .chip = MOTIONSENSE_CHIP_SI1141,
-	 .type = MOTIONSENSE_TYPE_LIGHT,
-	 .location = MOTIONSENSE_LOC_LID,
-	 .drv = &si114x_drv,
-	 .mutex = &g_lid_mutex,
-	 .drv_data = &g_si114x_data,
-	 .port = I2C_PORT_ALS,
-	 .i2c_spi_addr_flags = SI114X_ADDR_FLAGS,
-	 .rot_standard_ref = NULL,
-	 .default_range = 6000, /* 60.00%: int = 0 - frac = 6000/10000 */
-	 .min_frequency = SI114X_LIGHT_MIN_FREQ,
-	 .max_frequency = SI114X_LIGHT_MAX_FREQ,
-	 .config = {
-		 /* Run ALS sensor in S0 */
-		 [SENSOR_CONFIG_EC_S0] = {
-			 .odr = 1000,
-		 },
-	 },
-	},
-};
-const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[LID_LIGHT],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);