ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 134 deletions

diff --git a/board/eve/usb_pd_policy.c b/board/eve/usb_pd_policy.c
deleted file mode 100644
index d6dd5ad1be..0000000000
--- a/board/eve/usb_pd_policy.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/* Copyright 2016 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "atomic.h"
-#include "extpower.h"
-#include "charge_manager.h"
-#include "common.h"
-#include "console.h"
-#include "driver/charger/bd9995x.h"
-#include "driver/tcpm/anx74xx.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "registers.h"
-#include "system.h"
-#include "task.h"
-#include "timer.h"
-#include "util.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
-
-static uint8_t vbus_en[CONFIG_USB_PD_PORT_MAX_COUNT];
-static uint8_t vbus_rp[CONFIG_USB_PD_PORT_MAX_COUNT] = {TYPEC_RP_1A5,
-							TYPEC_RP_1A5};
-
-int board_vbus_source_enabled(int port)
-{
-	return vbus_en[port];
-}
-
-static void board_vbus_update_source_current(int port)
-{
-	enum gpio_signal gpio_5v_en = port ? GPIO_USB_C1_5V_EN :
-		GPIO_USB_C0_5V_EN;
-	enum gpio_signal gpio_3a_en = port ? GPIO_EN_USB_C1_3A :
-		GPIO_EN_USB_C0_3A;
-	int flags;
-
-	if (system_get_board_version() >= BOARD_VERSION_P1B) {
-		/*
-		 * For P1B and beyond, 1.5 vs 3.0 A limit is controlled by a
-		 * dedicated gpio where high = 3.0A and low = 1.5A. VBUS on/off
-		 * is controlled by GPIO_USB_C0/1_5V_EN. Both of these signals
-		 * can remain outputs.
-		 */
-		gpio_set_level(gpio_3a_en, vbus_rp[port] == TYPEC_RP_3A0 ?
-			       1 : 0);
-		gpio_set_level(gpio_5v_en, vbus_en[port]);
-	} else {
-		/*
-		 * For P1 and earlier board revs, a single gpio signal is
-		 * used to both enable VBUS and set the current limit.
-		 * Driving USB_Cx_5V_EN high, actually put a 16.5k resistance
-		 * (2x 33k in parallel) on the NX5P3290 load switch ILIM pin,
-		 * setting a minimum OCP current of 3186 mA.
-		 * Putting an internal pull-up on USB_Cx_5V_EN, effectively put
-		 * a 33k resistor on ILIM, setting a minimum OCP current of
-		 * 1505 mA.
-		 */
-		flags = (vbus_rp[port] == TYPEC_RP_1A5 && vbus_en[port]) ?
-			(GPIO_INPUT | GPIO_PULL_UP) :
-			(GPIO_OUTPUT | GPIO_PULL_UP);
-		gpio_set_level(gpio_5v_en, vbus_en[port]);
-		gpio_set_flags(gpio_5v_en, flags);
-	}
-}
-
-void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
-	vbus_rp[port] = rp;
-
-	/* change the GPIO driving the load switch if needed */
-	board_vbus_update_source_current(port);
-}
-
-int pd_set_power_supply_ready(int port)
-{
-	/* Ensure we're not charging from this port */
-	bd9995x_select_input_port(port, 0);
-
-	pd_set_vbus_discharge(port, 0);
-	/* Provide VBUS */
-	vbus_en[port] = 1;
-	board_vbus_update_source_current(port);
-
-	/* notify host of power info change */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-
-	return EC_SUCCESS; /* we are ready */
-}
-
-void pd_power_supply_reset(int port)
-{
-	int prev_en;
-
-	prev_en = vbus_en[port];
-
-	/* Disable VBUS */
-	vbus_en[port] = 0;
-	board_vbus_update_source_current(port);
-
-	/* Enable discharge if we were previously sourcing 5V */
-	if (prev_en)
-		pd_set_vbus_discharge(port, 1);
-
-	/* notify host of power info change */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-}
-
-int pd_check_vconn_swap(int port)
-{
-	/* in G3, do not allow vconn swap since pp5000_A rail is off */
-	return gpio_get_level(GPIO_PMIC_SLP_SUS_L);
-}
-
-void pd_execute_data_swap(int port,
-			  enum pd_data_role data_role)
-{
-	/* Only port 0 supports device mode. */
-	if (port != 0)
-		return;
-
-	gpio_set_level(GPIO_USB2_OTG_ID,
-		      (data_role == PD_ROLE_UFP) ? 1 : 0);
-	gpio_set_level(GPIO_USB2_OTG_VBUSSENSE,
-		      (data_role == PD_ROLE_UFP) ? 1 : 0);
-}