ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 366 deletions

diff --git a/board/garg/board.c b/board/garg/board.c
deleted file mode 100644
index c5e4b4b83f..0000000000
--- a/board/garg/board.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Garg board-specific configuration */
-
-#include "adc.h"
-#include "battery.h"
-#include "button.h"
-#include "cbi_ssfc.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accel_kionix.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/accelgyro_icm426xx.h"
-#include "driver/accelgyro_icm_common.h"
-#include "driver/charger/bd9995x.h"
-#include "driver/ppc/nx20p348x.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/tcpm/tcpm.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "motion_sense.h"
-#include "power.h"
-#include "power_button.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "tcpm/tcpci.h"
-#include "temp_sensor.h"
-#include "temp_sensor/thermistor.h"
-#include "usb_mux.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#define USB_PD_PORT_ANX7447	0
-#define USB_PD_PORT_PS8751	1
-
-static uint8_t sku_id;
-
-/*
- * We have total 30 pins for keyboard connecter {-1, -1} mean
- * the N/A pin that don't consider it and reserve index 0 area
- * that we don't have pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
-		{-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6},
-		{0, 7}, {-1, -1}, {-1, -1}, {1, 4}, {1, 3},
-		{-1, -1}, {1, 6}, {1, 7}, {3, 1}, {2, 0},
-		{1, 5}, {2, 6}, {2, 7}, {2, 1}, {2, 4},
-		{2, 5}, {1, 2}, {2, 3}, {2, 2}, {3, 0},
-		{-1, -1}, {0, 4}, {-1, -1}, {8, 2}, {-1, -1},
-		{-1, -1},
-};
-
-const int keyboard_factory_scan_pins_used =
-			ARRAY_SIZE(keyboard_factory_scan_pins);
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_PD_C0_INT_ODL:
-		nx20p348x_interrupt(0);
-		break;
-
-	case GPIO_USB_PD_C1_INT_ODL:
-		nx20p348x_interrupt(1);
-		break;
-
-	default:
-		break;
-	}
-}
-
-/* Must come after other header files and GPIO interrupts*/
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_AMB] = {
-		"TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_TEMP_SENSOR_CHARGER] = {
-		"TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	/* Vbus sensing (1/10 voltage divider). */
-	[ADC_VBUS_C0] = {
-		"VBUS_C0", NPCX_ADC_CH9, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0},
-	[ADC_VBUS_C1] = {
-		"VBUS_C1", NPCX_ADC_CH4, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_BATTERY] = {.name = "Battery",
-				 .type = TEMP_SENSOR_TYPE_BATTERY,
-				 .read = charge_get_battery_temp,
-				 .idx = 0},
-	[TEMP_SENSOR_AMBIENT] = {.name = "Ambient",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_51k1_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_AMB},
-	[TEMP_SENSOR_CHARGER] = {.name = "Charger",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_13k7_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_CHARGER},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/* Motion sensors */
-/* Mutexes */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* Matrix to rotate accelrator into standard reference frame */
-const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ FLOAT_TO_FP(1), 0,  0},
-	{ 0, 0,  FLOAT_TO_FP(1)}
-};
-
-const mat33_fp_t base_icm_ref = {
-	{ FLOAT_TO_FP(-1), 0,  0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0,  FLOAT_TO_FP(1)}
-};
-
-/* sensor private data */
-static struct kionix_accel_data g_kx022_data;
-static struct bmi_drv_data_t g_bmi160_data;
-static struct icm_drv_data_t g_icm426xx_data;
-
-/* Drivers */
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-	 .name = "Lid Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_KX022,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_LID,
-	 .drv = &kionix_accel_drv,
-	 .mutex = &g_lid_mutex,
-	 .drv_data = &g_kx022_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = KX022_ADDR1_FLAGS,
-	 .rot_standard_ref = NULL, /* Identity matrix. */
-	 .default_range = 2, /* g */
-	 .min_frequency = KX022_ACCEL_MIN_FREQ,
-	 .max_frequency = KX022_ACCEL_MAX_FREQ,
-	 .config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		 /* Sensor on for lid angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	 },
-	},
-	[BASE_ACCEL] = {
-	 .name = "Base Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .rot_standard_ref = &base_standard_ref,
-	 .default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-	 .min_frequency = BMI_ACCEL_MIN_FREQ,
-	 .max_frequency = BMI_ACCEL_MAX_FREQ,
-	 .config = {
-		 /* EC use accel for angle detection */
-		 [SENSOR_CONFIG_EC_S0] = {
-			.odr = 13000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		 },
-		 /* Sensor on for angle detection */
-		 [SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		 },
-	 },
-	},
-	[BASE_GYRO] = {
-	 .name = "Base Gyro",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_GYRO,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .default_range = 1000, /* dps */
-	 .rot_standard_ref = &base_standard_ref,
-	 .min_frequency = BMI_GYRO_MIN_FREQ,
-	 .max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-};
-
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-struct motion_sensor_t icm426xx_base_accel = {
-	 .name = "Base Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_ICM426XX,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &icm426xx_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_icm426xx_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS,
-	 .rot_standard_ref = &base_icm_ref,
-	 .default_range = 4,  /* g */
-	 .min_frequency = ICM426XX_ACCEL_MIN_FREQ,
-	 .max_frequency = ICM426XX_ACCEL_MAX_FREQ,
-	 .config = {
-		 /* EC use accel for angle detection */
-		 [SENSOR_CONFIG_EC_S0] = {
-			.odr = 13000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		 },
-		 /* Sensor on for angle detection */
-		 [SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		 },
-	 },
-};
-
-struct motion_sensor_t icm426xx_base_gyro = {
-	 .name = "Base Gyro",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_ICM426XX,
-	 .type = MOTIONSENSE_TYPE_GYRO,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &icm426xx_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_icm426xx_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS,
-	 .default_range = 1000, /* dps */
-	 .rot_standard_ref = &base_icm_ref,
-	 .min_frequency = ICM426XX_GYRO_MIN_FREQ,
-	 .max_frequency = ICM426XX_GYRO_MAX_FREQ,
-};
-
-static int board_is_convertible(void)
-{
-	/*
-	 * Garg360: 37, 38, 39
-	 * Unprovisioned: 255
-	 */
-	return sku_id == 37 || sku_id == 38 || sku_id == 39 || sku_id == 255;
-}
-
-static void board_update_sensor_config_from_sku(void)
-{
-	if (board_is_convertible()) {
-		if (get_cbi_ssfc_sensor() == SSFC_SENSOR_ICM426XX) {
-			motion_sensors[BASE_ACCEL] = icm426xx_base_accel;
-			motion_sensors[BASE_GYRO] = icm426xx_base_gyro;
-			ccprints("BASE GYRO is ICM426XX");
-		} else
-			ccprints("BASE GYRO is BMI160");
-		motion_sensor_count = ARRAY_SIZE(motion_sensors);
-		/* Enable Base Accel interrupt */
-		gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-	} else {
-		motion_sensor_count = 0;
-		gmr_tablet_switch_disable();
-		/* Base accel is not stuffed, don't allow line to float */
-		gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-}
-
-void sensor_interrupt(enum gpio_signal signal)
-{
-	switch (motion_sensors[BASE_ACCEL].chip) {
-	case MOTIONSENSE_CHIP_ICM426XX:
-		icm426xx_interrupt(signal);
-		break;
-	case MOTIONSENSE_CHIP_BMI160:
-	default:
-		bmi160_interrupt(signal);
-		break;
-	}
-}
-
-/* Read CBI from i2c eeprom and initialize variables for board variants */
-static void cbi_init(void)
-{
-	uint32_t val;
-
-	if (cbi_get_sku_id(&val) != EC_SUCCESS || val > UINT8_MAX)
-		return;
-	sku_id = val;
-	CPRINTSUSB("SKU: %d", sku_id);
-
-	board_update_sensor_config_from_sku();
-}
-DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1);
-
-void board_hibernate_late(void)
-{
-	int i;
-
-	const uint32_t hibernate_pins[][2] = {
-		/* Turn off LEDs before going to hibernate */
-		{GPIO_BAT_LED_BLUE_L, GPIO_INPUT | GPIO_PULL_UP},
-		{GPIO_BAT_LED_ORANGE_L, GPIO_INPUT | GPIO_PULL_UP},
-	};
-
-	for (i = 0; i < ARRAY_SIZE(hibernate_pins); ++i)
-		gpio_set_flags(hibernate_pins[i][0], hibernate_pins[i][1]);
-}
-
-/* This callback disables keyboard when convertibles are fully open */
-__override void lid_angle_peripheral_enable(int enable)
-{
-	/*
-	 * If the lid is in tablet position via other sensors,
-	 * ignore the lid angle, which might be faulty then
-	 * disable keyboard.
-	 */
-	if (tablet_get_mode())
-		enable = 0;
-	if (board_is_convertible())
-		keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE);
-}
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* Check that port number is valid. */
-	if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
-		return;
-
-	/* Note that the level is inverted because the pin is active low. */
-	gpio_set_level(GPIO_USB_C_OC, !is_overcurrented);
-}
-
-__override uint8_t board_get_usb_pd_port_count(void)
-{
-	/* HDMI SKU has one USB PD port */
-	if (sku_id == 9 || sku_id == 19 || sku_id == 50 || sku_id == 52)
-		return CONFIG_USB_PD_PORT_MAX_COUNT - 1;
-	return CONFIG_USB_PD_PORT_MAX_COUNT;
-}