ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 250 deletions

diff --git a/board/gimble/board.h b/board/gimble/board.h
deleted file mode 100644
index 9b01e09ad3..0000000000
--- a/board/gimble/board.h
+++ /dev/null
@@ -1,250 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Brya board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#include "compile_time_macros.h"
-
-/* Baseboard features */
-#include "baseboard.h"
-
-/*
- * This will happen automatically on NPCX9 ES2 and later. Do not remove
- * until we can confirm all earlier chips are out of service.
- */
-#define CONFIG_HIBERNATE_PSL_VCC1_RST_WAKEUP
-
-#define CONFIG_MP2964
-
-/* Sensors */
-/* BMA253 accelerometer in lid */
-#define CONFIG_ACCEL_BMA255
-
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCELGYRO_BMI160	/* Base accel/gyro */
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-/* BMA422 accelerometer in lid */
-#define CONFIG_ACCEL_BMA4XX
-
-#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel/gyro */
-#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-
-/* Lid accel */
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE	BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID	LID_ACCEL
-
-/* Enable sensor fifo, must also define the _SIZE and _THRES */
-#define CONFIG_ACCEL_FIFO
-/* FIFO size is in power of 2. */
-#define CONFIG_ACCEL_FIFO_SIZE 256
-/* Depends on how fast the AP boots and typical ODRs */
-#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
-
-/* Sensor console commands */
-#define CONFIG_CMD_ACCELS
-#define CONFIG_CMD_ACCEL_INFO
-
-/* USB Type A Features */
-#define USB_PORT_COUNT			1
-#define CONFIG_USB_PORT_POWER_DUMB
-
-/* USB Type C and USB PD defines */
-#define CONFIG_IO_EXPANDER
-#define CONFIG_IO_EXPANDER_NCT38XX
-#define CONFIG_IO_EXPANDER_PORT_COUNT		1
-
-#define CONFIG_USB_PD_TCPM_PS8815
-#undef CONFIG_USBC_RETIMER_INTEL_BB
-
-#define CONFIG_USBC_PPC_SYV682X
-#define CONFIG_USBC_PPC_NX20P3483
-
-/* measure and check these values on gimble */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY	30000 /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY	30000 /* us */
-#define PD_VCONN_SWAP_DELAY		5000 /* us */
-
-/*
- * Passive USB-C cables only support up to 60W.
- */
-#define PD_OPERATING_POWER_MW	15000
-#define PD_MAX_POWER_MW		60000
-#define PD_MAX_CURRENT_MA	3000
-#define PD_MAX_VOLTAGE_MV	20000
-
-/*
- * Macros for GPIO signals used in common code that don't match the
- * schematic names. Signal names in gpio.inc match the schematic and are
- * then redefined here to so it's more clear which signal is being used for
- * which purpose.
- */
-#define GPIO_AC_PRESENT			GPIO_ACOK_OD
-#define GPIO_CPU_PROCHOT		GPIO_EC_PROCHOT_ODL
-#define GPIO_EC_INT_L			GPIO_EC_PCH_INT_ODL
-#define GPIO_ENABLE_BACKLIGHT		GPIO_EC_EN_EDP_BL
-#define GPIO_ENTERING_RW		GPIO_EC_ENTERING_RW
-#define GPIO_KBD_KSO2			GPIO_EC_KSO_02_INV
-#define GPIO_PACKET_MODE_EN		GPIO_EC_GSC_PACKET_MODE
-#define GPIO_PCH_PWRBTN_L		GPIO_EC_PCH_PWR_BTN_ODL
-#define GPIO_PCH_RSMRST_L		GPIO_EC_PCH_RSMRST_L
-#define GPIO_PCH_RTCRST			GPIO_EC_PCH_RTCRST
-#define GPIO_PCH_SLP_S0_L		GPIO_SYS_SLP_S0IX_L
-#define GPIO_PCH_SLP_S3_L		GPIO_SLP_S3_L
-#define GMR_TABLET_MODE_GPIO_L		GPIO_TABLET_MODE_L
-
-/*
- * GPIO_EC_PCH_INT_ODL is used for MKBP events as well as a PCH wakeup
- * signal.
- */
-#define GPIO_PCH_WAKE_L			GPIO_EC_PCH_INT_ODL
-#define GPIO_PG_EC_ALL_SYS_PWRGD	GPIO_SEQ_EC_ALL_SYS_PG
-#define GPIO_PG_EC_DSW_PWROK		GPIO_SEQ_EC_DSW_PWROK
-#define GPIO_PG_EC_RSMRST_ODL		GPIO_SEQ_EC_RSMRST_ODL
-#define GPIO_POWER_BUTTON_L		GPIO_GSC_EC_PWR_BTN_ODL
-#define GPIO_RSMRST_L_PGOOD		GPIO_SEQ_EC_RSMRST_ODL
-#define GPIO_SYS_RESET_L		GPIO_SYS_RST_ODL
-#define GPIO_VOLUME_DOWN_L		GPIO_EC_VOLDN_BTN_ODL
-#define GPIO_VOLUME_UP_L		GPIO_EC_VOLUP_BTN_ODL
-#define GPIO_WP_L			GPIO_EC_WP_ODL
-
-/* System has back-lit keyboard */
-#define CONFIG_PWM_KBLIGHT
-
-/* Keyboard features */
-#define CONFIG_KEYBOARD_VIVALDI
-#define CONFIG_KEYBOARD_REFRESH_ROW3
-
-/* I2C Bus Configuration */
-
-#define I2C_PORT_SENSOR		NPCX_I2C_PORT0_0
-
-#define I2C_PORT_USB_C0_TCPC	NPCX_I2C_PORT1_0
-#define I2C_PORT_USB_C1_TCPC	NPCX_I2C_PORT4_1
-
-#define I2C_PORT_USB_C0_PPC	NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_C1_PPC	NPCX_I2C_PORT4_1
-
-#define I2C_PORT_USB_C0_BC12	NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_C1_BC12	NPCX_I2C_PORT4_1
-
-#define I2C_PORT_BATTERY	NPCX_I2C_PORT5_0
-#define I2C_PORT_CHARGER	NPCX_I2C_PORT7_0
-#define I2C_PORT_EEPROM		NPCX_I2C_PORT7_0
-#define I2C_PORT_MP2964		NPCX_I2C_PORT7_0
-
-/* define this to aviod error on CONFIG_ACCELGYRO_BMI_COMM_I2C */
-#define I2C_PORT_ACCEL		I2C_PORT_SENSOR
-
-#define I2C_ADDR_EEPROM_FLAGS	0x50
-
-#define I2C_ADDR_MP2964_FLAGS	0x20
-
-/* Disabling Thunderbolt-compatible mode */
-#undef CONFIG_USB_PD_TBT_COMPAT_MODE
-
-/* Enabling USB4 mode */
-#undef CONFIG_USB_PD_USB4
-
-/* Retimer */
-#undef CONFIG_USBC_RETIMER_FW_UPDATE
-
-/* Thermal features */
-#define CONFIG_FANS FAN_CH_COUNT
-#define CONFIG_THERMISTOR
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_TEMP_SENSOR_POWER_GPIO	GPIO_SEQ_EC_DSW_PWROK
-#define CONFIG_STEINHART_HART_3V3_30K9_47K_4050B
-
-/* LED defines */
-#define CONFIG_LED_ONOFF_STATES
-#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10
-
-/*
- * TODO(b/181271666): no fan control loop until sensors are tuned
- */
-/* Fan features */
-#define CONFIG_CUSTOM_FAN_CONTROL
-
-/* Charger defines */
-#define CONFIG_CHARGER_BQ25720
-#define CONFIG_CHARGER_BQ25720_VSYS_TH2_DV	70
-#define CONFIG_CHARGE_RAMP_SW
-#define CONFIG_CHARGER_SENSE_RESISTOR		10
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC	10
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"	/* needed by registers.h */
-#include "registers.h"
-#include "usbc_config.h"
-
-enum adc_channel {
-	ADC_TEMP_SENSOR_1_DDR_SOC,
-	ADC_TEMP_SENSOR_2_FAN,
-	ADC_TEMP_SENSOR_3_CHARGER,
-	ADC_CH_COUNT
-};
-
-enum temp_sensor_id {
-	TEMP_SENSOR_1_DDR_SOC,
-	TEMP_SENSOR_2_FAN,
-	TEMP_SENSOR_3_CHARGER,
-	TEMP_SENSOR_COUNT
-};
-
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT
-};
-
-enum ioex_port {
-	IOEX_C0_NCT38XX = 0,
-	IOEX_PORT_COUNT
-};
-
-enum battery_type {
-	BATTERY_SIMPLO_HIGHPOWER,
-	BATTERY_COSMX,
-	BATTERY_TYPE_COUNT
-};
-
-enum pwm_channel {
-	PWM_CH_LED2 = 0,		/* PWM0 (white charger) */
-	PWM_CH_LED3,			/* PWM1 (orange on DB) */
-	PWM_CH_LED1,			/* PWM2 (orange charger) */
-	PWM_CH_KBLIGHT,			/* PWM3 */
-	PWM_CH_FAN,			/* PWM5 */
-	PWM_CH_LED4,			/* PWM7 (white on DB) */
-	PWM_CH_COUNT
-};
-
-enum fan_channel {
-	FAN_CH_0 = 0,
-	FAN_CH_COUNT
-};
-
-enum mft_channel {
-	MFT_CH_0 = 0,
-	MFT_CH_COUNT
-};
-
-void motion_interrupt(enum gpio_signal signal);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */