ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 251 deletions

diff --git a/board/goroh/board.c b/board/goroh/board.c
deleted file mode 100644
index b28322eca0..0000000000
--- a/board/goroh/board.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-/* Goroh board configuration */
-
-#include "adc.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "chipset.h"
-#include "common.h"
-#include "console.h"
-#include "driver/accel_lis2dw12.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/als_tcs3400.h"
-#include "driver/bc12/mt6360.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/ppc/syv682x.h"
-#include "driver/tcpm/it83xx_pd.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "driver/usb_mux/it5205.h"
-#include "driver/usb_mux/ps8743.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "motion_sense.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "regulator.h"
-#include "spi.h"
-#include "switch.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "timer.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd_tcpm.h"
-#include "usbc_ppc.h"
-
-#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* Initialize board. */
-static void board_init(void)
-{
-	/* Enable motion sensor interrupt */
-	gpio_enable_interrupt(GPIO_BASE_IMU_INT_L);
-	gpio_enable_interrupt(GPIO_LID_ACCEL_INT_L);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-/* Sensor */
-static struct mutex g_base_mutex;
-static struct mutex g_lid_mutex;
-
-static struct bmi_drv_data_t g_bmi160_data;
-static struct stprivate_data g_lis2dwl_data;
-
-/* Matrix to rotate accelerometer into standard reference frame */
-static const mat33_fp_t base_standard_ref = {
-	{0, FLOAT_TO_FP(1), 0},
-	{FLOAT_TO_FP(-1), 0, 0},
-	{0, 0, FLOAT_TO_FP(1)},
-};
-
-static void update_rotation_matrix(void)
-{
-	if (board_get_version() >= 2) {
-		motion_sensors[BASE_ACCEL].rot_standard_ref =
-			&base_standard_ref;
-		motion_sensors[BASE_GYRO].rot_standard_ref =
-			&base_standard_ref;
-	}
-}
-DECLARE_HOOK(HOOK_INIT, update_rotation_matrix, HOOK_PRIO_INIT_ADC + 2);
-
-struct motion_sensor_t motion_sensors[] = {
-	/*
-	 * Note: bmi160: supports accelerometer and gyro sensor
-	 * Requirement: accelerometer sensor must init before gyro sensor
-	 * DO NOT change the order of the following table.
-	 */
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.rot_standard_ref = NULL, /* identity matrix */
-		.default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-		.min_frequency = BMI_ACCEL_MIN_FREQ,
-		.max_frequency = BMI_ACCEL_MAX_FREQ,
-		.config = {
-			/* Sensor on for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			/* Sensor on for angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.default_range = 1000, /* dps */
-		.rot_standard_ref = NULL, /* identity matrix */
-		.min_frequency = BMI_GYRO_MIN_FREQ,
-		.max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LIS2DWL,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &lis2dw12_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_lis2dwl_data,
-		.int_signal = GPIO_LID_ACCEL_INT_L,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = LIS2DWL_ADDR1_FLAGS,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.rot_standard_ref = NULL, /* identity matrix */
-		.default_range = 2, /* g */
-		.min_frequency = LIS2DW12_ODR_MIN_VAL,
-		.max_frequency = LIS2DW12_ODR_MAX_VAL,
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 12500 | ROUND_UP_FLAG,
-			},
-			/* Sensor on for lid angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-};
-const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
-const struct adc_t adc_channels[] = {
-	/* Convert to mV (3000mV/1024). */
-	{"VBUS_C0", ADC_MAX_MVOLT * 10, ADC_READ_MAX + 1, 0, CHIP_ADC_CH0},
-	{"BOARD_ID_0", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH1},
-	{"BOARD_ID_1", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH2},
-	/* AMON/BMON gain = 17.97 */
-	{"CHARGER_AMON_R", ADC_MAX_MVOLT * 1000 / 17.97, ADC_READ_MAX + 1, 0,
-	 CHIP_ADC_CH3},
-	{"VBUS_C1", ADC_MAX_MVOLT * 10, ADC_READ_MAX + 1, 0, CHIP_ADC_CH5},
-	{"CHARGER_PMON", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH6},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* PWM */
-
-/*
- * PWM channels. Must be in the exactly same order as in enum pwm_channel.
- * There total three 16 bits clock prescaler registers for all pwm channels,
- * so use the same frequency and prescaler register setting is required if
- * number of pwm channel greater than three.
- */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_LED1] = {
-		.channel = 0,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 324, /* maximum supported frequency */
-		.pcfsr_sel = PWM_PRESCALER_C4
-	},
-	[PWM_CH_LED2] = {
-		.channel = 1,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 324, /* maximum supported frequency */
-		.pcfsr_sel = PWM_PRESCALER_C4
-	},
-	[PWM_CH_LED3] = {
-		.channel = 2,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 324, /* maximum supported frequency */
-		.pcfsr_sel = PWM_PRESCALER_C4
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-int board_accel_force_mode_mask(void)
-{
-	int version = board_get_version();
-
-	if (version == -1 || version >= 2)
-		return 0;
-	return BIT(LID_ACCEL);
-}
-
-static void board_suspend(void)
-{
-	if (board_get_version() >= 3)
-		gpio_set_level(GPIO_EN_5V_USM, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_suspend, HOOK_PRIO_DEFAULT);
-
-static void board_resume(void)
-{
-	if (board_get_version() >= 3)
-		gpio_set_level(GPIO_EN_5V_USM, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_resume, HOOK_PRIO_DEFAULT);
-
-__override int syv682x_board_is_syv682c(int port)
-{
-	return board_get_version() > 2;
-}
-
-#ifdef CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT
-enum adc_channel board_get_vbus_adc(int port)
-{
-	if (port == 0)
-		return  ADC_VBUS_C0;
-	if (port == 1)
-		return  ADC_VBUS_C1;
-	CPRINTSUSB("Unknown vbus adc port id: %d", port);
-	return ADC_VBUS_C0;
-}
-#endif /* CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT */