ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 651 deletions

diff --git a/board/gumboz/board.c b/board/gumboz/board.c
deleted file mode 100644
index 4428819415..0000000000
--- a/board/gumboz/board.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "battery_smart.h"
-#include "button.h"
-#include "cros_board_info.h"
-#include "charge_state.h"
-#include "driver/accel_kionix.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/aoz1380.h"
-#include "driver/ppc/nx20p348x.h"
-#include "driver/tcpm/nct38xx.h"
-#include "driver/usb_mux/amd_fp5.h"
-#include "driver/usb_mux/ps8743.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "ioexpander.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "thermal.h"
-#include "usb_charge.h"
-#include "usb_pd_tcpm.h"
-#include "usbc_ppc.h"
-
-#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* This I2C moved. Temporarily detect and support the V0 HW. */
-int I2C_PORT_BATTERY = I2C_PORT_BATTERY_V1;
-
-#include "gpio_list.h"
-
-/* Motion sensors */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* sensor private data */
-static struct kionix_accel_data  g_kx022_data;
-static struct lsm6dsm_data g_lsm6dsm_data = LSM6DSM_DATA;
-
-/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t lid_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-static const mat33_fp_t base_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-/* TODO(gcc >= 5.0) Remove the casts to const pointer at rot_standard_ref */
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_KX022,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &kionix_accel_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_kx022_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = KX022_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.default_range = 2, /* g */
-		/* We only use 2g because its resolution is only 8-bits */
-		.min_frequency = KX022_ACCEL_MIN_FREQ,
-		.max_frequency = KX022_ACCEL_MAX_FREQ,
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(g_lsm6dsm_data,
-				MOTIONSENSE_TYPE_ACCEL),
-		.int_signal = GPIO_6AXIS_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-	  .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs.*/
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			/* Sensor on for angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(g_lsm6dsm_data,
-				MOTIONSENSE_TYPE_GYRO),
-		.int_signal = GPIO_6AXIS_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	},
-};
-
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/*****************************************************************************
- * Retimers
- */
-
-static void retimers_on(void)
-{
-	/* usba retimer power on */
-	ioex_set_level(IOEX_USB_A1_RETIMER_EN, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, retimers_on, HOOK_PRIO_DEFAULT);
-
-static void retimers_off(void)
-{
-	/* usba retimer power off */
-	ioex_set_level(IOEX_USB_A1_RETIMER_EN, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, retimers_off, HOOK_PRIO_DEFAULT);
-
-/*****************************************************************************
- * USB-C
- */
-
-/*
- * USB C0 port SBU mux use standalone PI3USB221
- * chip and it need a board specific driver.
- * Overall, it will use chained mux framework.
- */
-static int pi3usb221_set_mux(const struct usb_mux *me, mux_state_t mux_state,
-			     bool *ack_required)
-{
-	/* This driver does not use host command ACKs */
-	*ack_required = false;
-
-	if (mux_state & USB_PD_MUX_POLARITY_INVERTED)
-		ioex_set_level(IOEX_USB_C0_SBU_FLIP, 1);
-	else
-		ioex_set_level(IOEX_USB_C0_SBU_FLIP, 0);
-
-	return EC_SUCCESS;
-}
-
-/*
- * .init is not necessary here because it has nothing
- * to do. Primary mux will handle mux state so .get is
- * not needed as well. usb_mux.c can handle the situation
- * properly.
- */
-const struct usb_mux_driver usbc0_sbu_mux_driver = {
-	.set = pi3usb221_set_mux,
-};
-
-/*
- * Since PI3USB221 is not a i2c device, .i2c_port and
- * .i2c_addr_flags are not required here.
- */
-const struct usb_mux usbc0_sbu_mux = {
-	.usb_port = USBC_PORT_C0,
-	.driver = &usbc0_sbu_mux_driver,
-};
-
-struct usb_mux usbc1_amd_fp5_usb_mux = {
-	.usb_port = USBC_PORT_C1,
-	.i2c_port = I2C_PORT_USB_AP_MUX,
-	.i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS,
-	.driver = &amd_fp5_usb_mux_driver,
-	.flags = USB_MUX_FLAG_SET_WITHOUT_FLIP,
-};
-
-struct usb_mux usb_muxes[] = {
-	[USBC_PORT_C0] = {
-		.usb_port = USBC_PORT_C0,
-		.i2c_port = I2C_PORT_USB_AP_MUX,
-		.i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS,
-		.driver = &amd_fp5_usb_mux_driver,
-		.next_mux = &usbc0_sbu_mux,
-	},
-	[USBC_PORT_C1] = {
-		.usb_port = USBC_PORT_C1,
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = PS8743_I2C_ADDR1_FLAG,
-		.driver = &ps8743_usb_mux_driver,
-		.next_mux = &usbc1_amd_fp5_usb_mux,
-	}
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
-
-struct ppc_config_t ppc_chips[] = {
-	[USBC_PORT_C0] = {
-		/* Device does not talk I2C */
-		.drv = &aoz1380_drv
-	},
-
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = NX20P3483_ADDR1_FLAGS,
-		.drv = &nx20p348x_drv
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
-unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
-
-void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_FAULT_ODL:
-		aoz1380_interrupt(USBC_PORT_C0);
-		break;
-
-	case GPIO_USB_C1_PPC_INT_ODL:
-		/*
-		 * Sensitive only to falling edges; GPIO is configured for both
-		 * because this input may be used for HDMI HPD instead.
-		 */
-		if (!gpio_get_level(signal))
-			nx20p348x_interrupt(USBC_PORT_C1);
-		break;
-
-	default:
-		break;
-	}
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_valid_port = (port >= 0 &&
-			     port < CONFIG_USB_PD_PORT_MAX_COUNT);
-	int i;
-
-	if (port == CHARGE_PORT_NONE) {
-		CPRINTSUSB("Disabling all charger ports");
-
-		/* Disable all ports. */
-		for (i = 0; i < ppc_cnt; i++) {
-			/*
-			 * Do not return early if one fails otherwise we can
-			 * get into a boot loop assertion failure.
-			 */
-			if (ppc_vbus_sink_enable(i, 0))
-				CPRINTSUSB("Disabling C%d as sink failed.", i);
-		}
-
-		return EC_SUCCESS;
-	} else if (!is_valid_port) {
-		return EC_ERROR_INVAL;
-	}
-
-
-	/* Check if the port is sourcing VBUS. */
-	if (ppc_is_sourcing_vbus(port)) {
-		CPRINTFUSB("Skip enable C%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-	CPRINTSUSB("New charge port: C%d", port);
-
-	/*
-	 * Turn off the other ports' sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < ppc_cnt; i++) {
-		if (i == port)
-			continue;
-
-		if (ppc_vbus_sink_enable(i, 0))
-			CPRINTSUSB("C%d: sink path disable failed.", i);
-	}
-
-	/* Enable requested charge port. */
-	if (ppc_vbus_sink_enable(port, 1)) {
-		CPRINTSUSB("C%d: sink path enable failed.", port);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	return EC_SUCCESS;
-}
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	switch (port) {
-	case USBC_PORT_C0:
-		ioex_set_level(IOEX_USB_C0_FAULT_ODL, !is_overcurrented);
-		break;
-
-	case USBC_PORT_C1:
-		ioex_set_level(IOEX_USB_C1_FAULT_ODL, !is_overcurrented);
-		break;
-
-	default:
-		break;
-	}
-}
-
-const struct tcpc_config_t tcpc_config[] = {
-	[USBC_PORT_C0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC0,
-			.addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		},
-		.drv = &nct38xx_tcpm_drv,
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-	},
-	[USBC_PORT_C1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC1,
-			.addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		},
-		.drv = &nct38xx_tcpm_drv,
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
-BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_TCPC0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);
-
-static void reset_nct38xx_port(int port)
-{
-	enum gpio_signal reset_gpio_l;
-
-	if (port == USBC_PORT_C0)
-		reset_gpio_l = GPIO_USB_C0_TCPC_RST_L;
-	else if (port == USBC_PORT_C1)
-		reset_gpio_l = GPIO_USB_C1_TCPC_RST_L;
-	else
-		/* Invalid port: do nothing */
-		return;
-
-	gpio_set_level(reset_gpio_l, 0);
-	msleep(NCT38XX_RESET_HOLD_DELAY_MS);
-	gpio_set_level(reset_gpio_l, 1);
-	nct38xx_reset_notify(port);
-	if (NCT3807_RESET_POST_DELAY_MS != 0)
-		msleep(NCT3807_RESET_POST_DELAY_MS);
-}
-
-
-void board_reset_pd_mcu(void)
-{
-	/* Reset TCPC0 */
-	reset_nct38xx_port(USBC_PORT_C0);
-
-	/* Reset TCPC1 */
-	reset_nct38xx_port(USBC_PORT_C1);
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	/*
-	 * Check which port has the ALERT line set and ignore if that TCPC has
-	 * its reset line active.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL)) {
-		if (gpio_get_level(GPIO_USB_C0_TCPC_RST_L) != 0)
-			status |= PD_STATUS_TCPC_ALERT_0;
-	}
-
-	if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL)) {
-		if (gpio_get_level(GPIO_USB_C1_TCPC_RST_L) != 0)
-			status |= PD_STATUS_TCPC_ALERT_1;
-	}
-
-	return status;
-}
-
-void tcpc_alert_event(enum gpio_signal signal)
-{
-	int port = -1;
-
-	switch (signal) {
-	case GPIO_USB_C0_TCPC_INT_ODL:
-		port = 0;
-		break;
-	case GPIO_USB_C1_TCPC_INT_ODL:
-		port = 1;
-		break;
-	default:
-		return;
-	}
-
-	schedule_deferred_pd_interrupt(port);
-}
-
-void bc12_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-		break;
-
-	case GPIO_USB_C1_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-		break;
-
-	default:
-		break;
-	}
-}
-
-int board_pd_set_frs_enable(int port, int enable)
-{
-	int rv = EC_SUCCESS;
-
-	/* Use the TCPC to enable fast switch when FRS included */
-	if (port == USBC_PORT_C0) {
-		rv = ioex_set_level(IOEX_USB_C0_TCPC_FASTSW_CTL_EN,
-				    !!enable);
-	} else {
-		rv = ioex_set_level(IOEX_USB_C1_TCPC_FASTSW_CTL_EN,
-				    !!enable);
-	}
-
-	return rv;
-}
-
-static void setup_fw_config(void)
-{
-	/* Enable PPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_PPC_FAULT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);
-
-	/* Enable TCPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);
-
-	/* Enable BC 1.2 interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
-
-	/* Enable SBU fault interrupts */
-	ioex_enable_interrupt(IOEX_USB_C0_SBU_FAULT_ODL);
-	ioex_enable_interrupt(IOEX_USB_C1_SBU_FAULT_DB_ODL);
-
-	if (ec_config_has_lid_angle_tablet_mode()) {
-		/* Enable Gyro interrupts */
-		gpio_enable_interrupt(GPIO_6AXIS_INT_L);
-	} else {
-		motion_sensor_count = 0;
-		/* Device is clamshell only */
-		tablet_set_mode(0, TABLET_TRIGGER_LID);
-		/* Gyro is not present, don't allow line to float */
-		gpio_set_flags(GPIO_6AXIS_INT_L, GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-}
-DECLARE_HOOK(HOOK_INIT, setup_fw_config, HOOK_PRIO_INIT_I2C + 2);
-
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = {
-		.channel = 3,
-		.flags = PWM_CONFIG_DSLEEP,
-		.freq = 100,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-struct ioexpander_config_t ioex_config[] = {
-	[IOEX_C0_NCT3807] = {
-		.i2c_host_port = I2C_PORT_TCPC0,
-		.i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		.drv = &nct38xx_ioexpander_drv,
-	},
-	[IOEX_C1_NCT3807] = {
-		.i2c_host_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		.drv = &nct38xx_ioexpander_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ioex_config) == CONFIG_IO_EXPANDER_PORT_COUNT);
-
-int usb_port_enable[USBA_PORT_COUNT] = {
-	IOEX_EN_USB_A0_5V,
-	IOEX_EN_USB_A1_5V_DB,
-};
-
-#ifdef CONFIG_KEYBOARD_FACTORY_TEST
-/*
- * Map keyboard connector pins to EC GPIO pins for factory test.
- * Pins mapped to {-1, -1} are skipped.
- * The connector has 24 pins total, and there is no pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
-		{0, 5}, {1, 1}, {1, 0}, {0, 6}, {0, 7},
-		{1, 4}, {1, 3}, {1, 6}, {1, 7}, {3, 1},
-		{2, 0}, {1, 5}, {2, 6}, {2, 7}, {2, 1},
-		{2, 4}, {2, 5}, {1, 2}, {2, 3}, {2, 2},
-		{3, 0}, {-1, -1}, {-1, -1}, {-1, -1},
-};
-const int keyboard_factory_scan_pins_used =
-			ARRAY_SIZE(keyboard_factory_scan_pins);
-#endif
-
-#define CHARGING_CURRENT_500MA 500
-
-int charger_profile_override(struct charge_state_data *curr)
-{
-	int rv;
-	static int thermal_sensor_temp;
-	static int prev_thermal_sensor_temp;
-	static int limit_charge;
-	static int limit_usbc_power;
-	static int limit_usbc_power_backup;
-	enum tcpc_rp_value rp;
-
-	rv = temp_sensor_read(TEMP_SENSOR_CHARGER, &thermal_sensor_temp);
-
-	if (rv != EC_SUCCESS)
-		return 0;
-
-	if (thermal_sensor_temp > prev_thermal_sensor_temp) {
-		if (thermal_sensor_temp > C_TO_K(63))
-			limit_usbc_power = 1;
-
-		else if (thermal_sensor_temp > C_TO_K(58)) {
-			if (curr->state == ST_CHARGE)
-				limit_charge = 1;
-		}
-	} else if (thermal_sensor_temp < prev_thermal_sensor_temp) {
-		if (thermal_sensor_temp < C_TO_K(57)) {
-			if (curr->state == ST_CHARGE)
-				limit_charge = 0;
-
-		} else if (thermal_sensor_temp < C_TO_K(62))
-			limit_usbc_power = 0;
-	}
-
-	if (chipset_in_state(CHIPSET_STATE_ANY_OFF))
-		return 0;
-
-	curr->requested_current = (limit_charge) ? CHARGING_CURRENT_500MA
-						 : curr->batt.desired_current;
-
-	if (limit_usbc_power != limit_usbc_power_backup) {
-		rp = (limit_usbc_power) ? TYPEC_RP_1A5
-					: TYPEC_RP_3A0;
-
-		ppc_set_vbus_source_current_limit(0, rp);
-		tcpm_select_rp_value(0, rp);
-		pd_update_contract(0);
-		limit_usbc_power_backup = limit_usbc_power;
-	}
-
-	prev_thermal_sensor_temp = thermal_sensor_temp;
-
-	return 0;
-}
-
-enum ec_status charger_profile_override_get_param(uint32_t param,
-							uint32_t *value)
-{
-	return EC_RES_INVALID_PARAM;
-}
-
-enum ec_status charger_profile_override_set_param(uint32_t param,
-							uint32_t value)
-{
-	return EC_RES_INVALID_PARAM;
-}
-
-__override struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT] = {
-	[TEMP_SENSOR_CHARGER] = {
-		.temp_host = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(63),
-			[EC_TEMP_THRESH_HALT] = C_TO_K(92),
-		},
-		.temp_host_release = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(62),
-		}
-	},
-	[TEMP_SENSOR_SOC] = {
-		.temp_host = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(80),
-			[EC_TEMP_THRESH_HALT] = C_TO_K(85),
-		},
-		.temp_host_release = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(77),
-		}
-	},
-	[TEMP_SENSOR_CPU] = {
-		.temp_host = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(85),
-			[EC_TEMP_THRESH_HALT] = C_TO_K(90),
-		},
-		.temp_host_release = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(83),
-		}
-	},
-};