ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

9 files changed, 0 insertions, 1466 deletions

diff --git a/board/gumboz/analyzestack.yaml b/board/gumboz/analyzestack.yaml
deleted file mode 100644
index 7ff5f39644..0000000000
--- a/board/gumboz/analyzestack.yaml
+++ /dev/null
@@ -1,2 +0,0 @@
-remove:
-- panic_assert_fail
diff --git a/board/gumboz/battery.c b/board/gumboz/battery.c
deleted file mode 100644
index 7d1831fdbc..0000000000
--- a/board/gumboz/battery.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all Gumboz battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* Simplo Coslight Battery Information */
-	[BATTERY_SIMPLO_COS] = {
-		.fuel_gauge = {
-			.manuf_name = "333-1C-DA-A",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0006,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max = 8800,	/* mV */
-			.voltage_normal = 7700,
-			.voltage_min = 6000,
-			.precharge_current = 256,	/* mA */
-			.start_charging_min_c = 0,
-			.start_charging_max_c = 45,
-			.charging_min_c = 0,
-			.charging_max_c = 45,
-			.discharging_min_c = -10,
-			.discharging_max_c = 60,
-		},
-	},
-
-	/* Simplo HIGHPOWER Battery Information */
-	[BATTERY_SIMPLO_HIGHPOWER] = {
-		.fuel_gauge = {
-			.manuf_name = "333-1D-DA-A",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0006,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max = 8800,	/* mV */
-			.voltage_normal = 7700,
-			.voltage_min = 6000,
-			.precharge_current = 256,	/* mA */
-			.start_charging_min_c = 0,
-			.start_charging_max_c = 45,
-			.charging_min_c = 0,
-			.charging_max_c = 45,
-			.discharging_min_c = -10,
-			.discharging_max_c = 60,
-		},
-	},
-
-	/* Samsung SDI Battery Information */
-	[BATTERY_SAMSUNG_SDI] = {
-		.fuel_gauge = {
-			.manuf_name = "333-54-DA-A",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0006,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max = 8800,	/* mV */
-			.voltage_normal = 7700,
-			.voltage_min = 6000,
-			.precharge_current = 256,	/* mA */
-			.start_charging_min_c = 0,
-			.start_charging_max_c = 45,
-			.charging_min_c = 0,
-			.charging_max_c = 45,
-			.discharging_min_c = -10,
-			.discharging_max_c = 60,
-		},
-	},
-
-	/* DynaPack ATL Battery Information */
-	[BATTERY_DYNAPACK_ATL] = {
-		.fuel_gauge = {
-			.manuf_name = "333-27-DA-A",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0006,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max = 8800,	/* mV */
-			.voltage_normal = 7700,
-			.voltage_min = 6000,
-			.precharge_current = 256,	/* mA */
-			.start_charging_min_c = 0,
-			.start_charging_max_c = 45,
-			.charging_min_c = 0,
-			.charging_max_c = 45,
-			.discharging_min_c = -10,
-			.discharging_max_c = 60,
-		},
-	},
-
-	/* DynaPack Cosmx Battery Information */
-	[BATTERY_DYNAPACK_COS] = {
-		.fuel_gauge = {
-			.manuf_name = "333-2C-DA-A",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0006,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max = 8800,	/* mV */
-			.voltage_normal = 7700,
-			.voltage_min = 6000,
-			.precharge_current = 256,	/* mA */
-			.start_charging_min_c = 0,
-			.start_charging_max_c = 45,
-			.charging_min_c = 0,
-			.charging_max_c = 45,
-			.discharging_min_c = -10,
-			.discharging_max_c = 60,
-		},
-	},
-
-	/* Cosmx Battery Information */
-	[BATTERY_COSMX] = {
-		.fuel_gauge = {
-			.manuf_name = "333-AC-DA-A",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0006,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max = 8800,	/* mV */
-			.voltage_normal = 7700,
-			.voltage_min = 6000,
-			.precharge_current = 256,	/* mA */
-			.start_charging_min_c = 0,
-			.start_charging_max_c = 45,
-			.charging_min_c = 0,
-			.charging_max_c = 45,
-			.discharging_min_c = -10,
-			.discharging_max_c = 60,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SIMPLO_COS;
diff --git a/board/gumboz/board.c b/board/gumboz/board.c
deleted file mode 100644
index 4428819415..0000000000
--- a/board/gumboz/board.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "battery_smart.h"
-#include "button.h"
-#include "cros_board_info.h"
-#include "charge_state.h"
-#include "driver/accel_kionix.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/aoz1380.h"
-#include "driver/ppc/nx20p348x.h"
-#include "driver/tcpm/nct38xx.h"
-#include "driver/usb_mux/amd_fp5.h"
-#include "driver/usb_mux/ps8743.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "ioexpander.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "thermal.h"
-#include "usb_charge.h"
-#include "usb_pd_tcpm.h"
-#include "usbc_ppc.h"
-
-#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* This I2C moved. Temporarily detect and support the V0 HW. */
-int I2C_PORT_BATTERY = I2C_PORT_BATTERY_V1;
-
-#include "gpio_list.h"
-
-/* Motion sensors */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* sensor private data */
-static struct kionix_accel_data  g_kx022_data;
-static struct lsm6dsm_data g_lsm6dsm_data = LSM6DSM_DATA;
-
-/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t lid_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-static const mat33_fp_t base_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-/* TODO(gcc >= 5.0) Remove the casts to const pointer at rot_standard_ref */
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_KX022,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &kionix_accel_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_kx022_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = KX022_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.default_range = 2, /* g */
-		/* We only use 2g because its resolution is only 8-bits */
-		.min_frequency = KX022_ACCEL_MIN_FREQ,
-		.max_frequency = KX022_ACCEL_MAX_FREQ,
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(g_lsm6dsm_data,
-				MOTIONSENSE_TYPE_ACCEL),
-		.int_signal = GPIO_6AXIS_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-	  .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs.*/
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			/* Sensor on for angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(g_lsm6dsm_data,
-				MOTIONSENSE_TYPE_GYRO),
-		.int_signal = GPIO_6AXIS_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	},
-};
-
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/*****************************************************************************
- * Retimers
- */
-
-static void retimers_on(void)
-{
-	/* usba retimer power on */
-	ioex_set_level(IOEX_USB_A1_RETIMER_EN, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, retimers_on, HOOK_PRIO_DEFAULT);
-
-static void retimers_off(void)
-{
-	/* usba retimer power off */
-	ioex_set_level(IOEX_USB_A1_RETIMER_EN, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, retimers_off, HOOK_PRIO_DEFAULT);
-
-/*****************************************************************************
- * USB-C
- */
-
-/*
- * USB C0 port SBU mux use standalone PI3USB221
- * chip and it need a board specific driver.
- * Overall, it will use chained mux framework.
- */
-static int pi3usb221_set_mux(const struct usb_mux *me, mux_state_t mux_state,
-			     bool *ack_required)
-{
-	/* This driver does not use host command ACKs */
-	*ack_required = false;
-
-	if (mux_state & USB_PD_MUX_POLARITY_INVERTED)
-		ioex_set_level(IOEX_USB_C0_SBU_FLIP, 1);
-	else
-		ioex_set_level(IOEX_USB_C0_SBU_FLIP, 0);
-
-	return EC_SUCCESS;
-}
-
-/*
- * .init is not necessary here because it has nothing
- * to do. Primary mux will handle mux state so .get is
- * not needed as well. usb_mux.c can handle the situation
- * properly.
- */
-const struct usb_mux_driver usbc0_sbu_mux_driver = {
-	.set = pi3usb221_set_mux,
-};
-
-/*
- * Since PI3USB221 is not a i2c device, .i2c_port and
- * .i2c_addr_flags are not required here.
- */
-const struct usb_mux usbc0_sbu_mux = {
-	.usb_port = USBC_PORT_C0,
-	.driver = &usbc0_sbu_mux_driver,
-};
-
-struct usb_mux usbc1_amd_fp5_usb_mux = {
-	.usb_port = USBC_PORT_C1,
-	.i2c_port = I2C_PORT_USB_AP_MUX,
-	.i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS,
-	.driver = &amd_fp5_usb_mux_driver,
-	.flags = USB_MUX_FLAG_SET_WITHOUT_FLIP,
-};
-
-struct usb_mux usb_muxes[] = {
-	[USBC_PORT_C0] = {
-		.usb_port = USBC_PORT_C0,
-		.i2c_port = I2C_PORT_USB_AP_MUX,
-		.i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS,
-		.driver = &amd_fp5_usb_mux_driver,
-		.next_mux = &usbc0_sbu_mux,
-	},
-	[USBC_PORT_C1] = {
-		.usb_port = USBC_PORT_C1,
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = PS8743_I2C_ADDR1_FLAG,
-		.driver = &ps8743_usb_mux_driver,
-		.next_mux = &usbc1_amd_fp5_usb_mux,
-	}
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
-
-struct ppc_config_t ppc_chips[] = {
-	[USBC_PORT_C0] = {
-		/* Device does not talk I2C */
-		.drv = &aoz1380_drv
-	},
-
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = NX20P3483_ADDR1_FLAGS,
-		.drv = &nx20p348x_drv
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
-unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
-
-void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_FAULT_ODL:
-		aoz1380_interrupt(USBC_PORT_C0);
-		break;
-
-	case GPIO_USB_C1_PPC_INT_ODL:
-		/*
-		 * Sensitive only to falling edges; GPIO is configured for both
-		 * because this input may be used for HDMI HPD instead.
-		 */
-		if (!gpio_get_level(signal))
-			nx20p348x_interrupt(USBC_PORT_C1);
-		break;
-
-	default:
-		break;
-	}
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_valid_port = (port >= 0 &&
-			     port < CONFIG_USB_PD_PORT_MAX_COUNT);
-	int i;
-
-	if (port == CHARGE_PORT_NONE) {
-		CPRINTSUSB("Disabling all charger ports");
-
-		/* Disable all ports. */
-		for (i = 0; i < ppc_cnt; i++) {
-			/*
-			 * Do not return early if one fails otherwise we can
-			 * get into a boot loop assertion failure.
-			 */
-			if (ppc_vbus_sink_enable(i, 0))
-				CPRINTSUSB("Disabling C%d as sink failed.", i);
-		}
-
-		return EC_SUCCESS;
-	} else if (!is_valid_port) {
-		return EC_ERROR_INVAL;
-	}
-
-
-	/* Check if the port is sourcing VBUS. */
-	if (ppc_is_sourcing_vbus(port)) {
-		CPRINTFUSB("Skip enable C%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-	CPRINTSUSB("New charge port: C%d", port);
-
-	/*
-	 * Turn off the other ports' sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < ppc_cnt; i++) {
-		if (i == port)
-			continue;
-
-		if (ppc_vbus_sink_enable(i, 0))
-			CPRINTSUSB("C%d: sink path disable failed.", i);
-	}
-
-	/* Enable requested charge port. */
-	if (ppc_vbus_sink_enable(port, 1)) {
-		CPRINTSUSB("C%d: sink path enable failed.", port);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	return EC_SUCCESS;
-}
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	switch (port) {
-	case USBC_PORT_C0:
-		ioex_set_level(IOEX_USB_C0_FAULT_ODL, !is_overcurrented);
-		break;
-
-	case USBC_PORT_C1:
-		ioex_set_level(IOEX_USB_C1_FAULT_ODL, !is_overcurrented);
-		break;
-
-	default:
-		break;
-	}
-}
-
-const struct tcpc_config_t tcpc_config[] = {
-	[USBC_PORT_C0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC0,
-			.addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		},
-		.drv = &nct38xx_tcpm_drv,
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-	},
-	[USBC_PORT_C1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC1,
-			.addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		},
-		.drv = &nct38xx_tcpm_drv,
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
-BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_TCPC0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);
-
-static void reset_nct38xx_port(int port)
-{
-	enum gpio_signal reset_gpio_l;
-
-	if (port == USBC_PORT_C0)
-		reset_gpio_l = GPIO_USB_C0_TCPC_RST_L;
-	else if (port == USBC_PORT_C1)
-		reset_gpio_l = GPIO_USB_C1_TCPC_RST_L;
-	else
-		/* Invalid port: do nothing */
-		return;
-
-	gpio_set_level(reset_gpio_l, 0);
-	msleep(NCT38XX_RESET_HOLD_DELAY_MS);
-	gpio_set_level(reset_gpio_l, 1);
-	nct38xx_reset_notify(port);
-	if (NCT3807_RESET_POST_DELAY_MS != 0)
-		msleep(NCT3807_RESET_POST_DELAY_MS);
-}
-
-
-void board_reset_pd_mcu(void)
-{
-	/* Reset TCPC0 */
-	reset_nct38xx_port(USBC_PORT_C0);
-
-	/* Reset TCPC1 */
-	reset_nct38xx_port(USBC_PORT_C1);
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	/*
-	 * Check which port has the ALERT line set and ignore if that TCPC has
-	 * its reset line active.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL)) {
-		if (gpio_get_level(GPIO_USB_C0_TCPC_RST_L) != 0)
-			status |= PD_STATUS_TCPC_ALERT_0;
-	}
-
-	if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL)) {
-		if (gpio_get_level(GPIO_USB_C1_TCPC_RST_L) != 0)
-			status |= PD_STATUS_TCPC_ALERT_1;
-	}
-
-	return status;
-}
-
-void tcpc_alert_event(enum gpio_signal signal)
-{
-	int port = -1;
-
-	switch (signal) {
-	case GPIO_USB_C0_TCPC_INT_ODL:
-		port = 0;
-		break;
-	case GPIO_USB_C1_TCPC_INT_ODL:
-		port = 1;
-		break;
-	default:
-		return;
-	}
-
-	schedule_deferred_pd_interrupt(port);
-}
-
-void bc12_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-		break;
-
-	case GPIO_USB_C1_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-		break;
-
-	default:
-		break;
-	}
-}
-
-int board_pd_set_frs_enable(int port, int enable)
-{
-	int rv = EC_SUCCESS;
-
-	/* Use the TCPC to enable fast switch when FRS included */
-	if (port == USBC_PORT_C0) {
-		rv = ioex_set_level(IOEX_USB_C0_TCPC_FASTSW_CTL_EN,
-				    !!enable);
-	} else {
-		rv = ioex_set_level(IOEX_USB_C1_TCPC_FASTSW_CTL_EN,
-				    !!enable);
-	}
-
-	return rv;
-}
-
-static void setup_fw_config(void)
-{
-	/* Enable PPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_PPC_FAULT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);
-
-	/* Enable TCPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);
-
-	/* Enable BC 1.2 interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
-
-	/* Enable SBU fault interrupts */
-	ioex_enable_interrupt(IOEX_USB_C0_SBU_FAULT_ODL);
-	ioex_enable_interrupt(IOEX_USB_C1_SBU_FAULT_DB_ODL);
-
-	if (ec_config_has_lid_angle_tablet_mode()) {
-		/* Enable Gyro interrupts */
-		gpio_enable_interrupt(GPIO_6AXIS_INT_L);
-	} else {
-		motion_sensor_count = 0;
-		/* Device is clamshell only */
-		tablet_set_mode(0, TABLET_TRIGGER_LID);
-		/* Gyro is not present, don't allow line to float */
-		gpio_set_flags(GPIO_6AXIS_INT_L, GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-}
-DECLARE_HOOK(HOOK_INIT, setup_fw_config, HOOK_PRIO_INIT_I2C + 2);
-
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = {
-		.channel = 3,
-		.flags = PWM_CONFIG_DSLEEP,
-		.freq = 100,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-struct ioexpander_config_t ioex_config[] = {
-	[IOEX_C0_NCT3807] = {
-		.i2c_host_port = I2C_PORT_TCPC0,
-		.i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		.drv = &nct38xx_ioexpander_drv,
-	},
-	[IOEX_C1_NCT3807] = {
-		.i2c_host_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		.drv = &nct38xx_ioexpander_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ioex_config) == CONFIG_IO_EXPANDER_PORT_COUNT);
-
-int usb_port_enable[USBA_PORT_COUNT] = {
-	IOEX_EN_USB_A0_5V,
-	IOEX_EN_USB_A1_5V_DB,
-};
-
-#ifdef CONFIG_KEYBOARD_FACTORY_TEST
-/*
- * Map keyboard connector pins to EC GPIO pins for factory test.
- * Pins mapped to {-1, -1} are skipped.
- * The connector has 24 pins total, and there is no pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
-		{0, 5}, {1, 1}, {1, 0}, {0, 6}, {0, 7},
-		{1, 4}, {1, 3}, {1, 6}, {1, 7}, {3, 1},
-		{2, 0}, {1, 5}, {2, 6}, {2, 7}, {2, 1},
-		{2, 4}, {2, 5}, {1, 2}, {2, 3}, {2, 2},
-		{3, 0}, {-1, -1}, {-1, -1}, {-1, -1},
-};
-const int keyboard_factory_scan_pins_used =
-			ARRAY_SIZE(keyboard_factory_scan_pins);
-#endif
-
-#define CHARGING_CURRENT_500MA 500
-
-int charger_profile_override(struct charge_state_data *curr)
-{
-	int rv;
-	static int thermal_sensor_temp;
-	static int prev_thermal_sensor_temp;
-	static int limit_charge;
-	static int limit_usbc_power;
-	static int limit_usbc_power_backup;
-	enum tcpc_rp_value rp;
-
-	rv = temp_sensor_read(TEMP_SENSOR_CHARGER, &thermal_sensor_temp);
-
-	if (rv != EC_SUCCESS)
-		return 0;
-
-	if (thermal_sensor_temp > prev_thermal_sensor_temp) {
-		if (thermal_sensor_temp > C_TO_K(63))
-			limit_usbc_power = 1;
-
-		else if (thermal_sensor_temp > C_TO_K(58)) {
-			if (curr->state == ST_CHARGE)
-				limit_charge = 1;
-		}
-	} else if (thermal_sensor_temp < prev_thermal_sensor_temp) {
-		if (thermal_sensor_temp < C_TO_K(57)) {
-			if (curr->state == ST_CHARGE)
-				limit_charge = 0;
-
-		} else if (thermal_sensor_temp < C_TO_K(62))
-			limit_usbc_power = 0;
-	}
-
-	if (chipset_in_state(CHIPSET_STATE_ANY_OFF))
-		return 0;
-
-	curr->requested_current = (limit_charge) ? CHARGING_CURRENT_500MA
-						 : curr->batt.desired_current;
-
-	if (limit_usbc_power != limit_usbc_power_backup) {
-		rp = (limit_usbc_power) ? TYPEC_RP_1A5
-					: TYPEC_RP_3A0;
-
-		ppc_set_vbus_source_current_limit(0, rp);
-		tcpm_select_rp_value(0, rp);
-		pd_update_contract(0);
-		limit_usbc_power_backup = limit_usbc_power;
-	}
-
-	prev_thermal_sensor_temp = thermal_sensor_temp;
-
-	return 0;
-}
-
-enum ec_status charger_profile_override_get_param(uint32_t param,
-							uint32_t *value)
-{
-	return EC_RES_INVALID_PARAM;
-}
-
-enum ec_status charger_profile_override_set_param(uint32_t param,
-							uint32_t value)
-{
-	return EC_RES_INVALID_PARAM;
-}
-
-__override struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT] = {
-	[TEMP_SENSOR_CHARGER] = {
-		.temp_host = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(63),
-			[EC_TEMP_THRESH_HALT] = C_TO_K(92),
-		},
-		.temp_host_release = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(62),
-		}
-	},
-	[TEMP_SENSOR_SOC] = {
-		.temp_host = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(80),
-			[EC_TEMP_THRESH_HALT] = C_TO_K(85),
-		},
-		.temp_host_release = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(77),
-		}
-	},
-	[TEMP_SENSOR_CPU] = {
-		.temp_host = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(85),
-			[EC_TEMP_THRESH_HALT] = C_TO_K(90),
-		},
-		.temp_host_release = {
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(83),
-		}
-	},
-};
diff --git a/board/gumboz/board.h b/board/gumboz/board.h
deleted file mode 100644
index 0cf51b5166..0000000000
--- a/board/gumboz/board.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Trembyle board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#define VARIANT_ZORK_DALBOZ
-
-#include <stdbool.h>
-#include "baseboard.h"
-
-#define CONFIG_USBC_PPC_NX20P3483
-#define CONFIG_USB_MUX_PS8743
-#define CONFIG_USB_MUX_RUNTIME_CONFIG
-
-#define CONFIG_USB_PD_PORT_MAX_COUNT 2
-#define CONFIG_USB_PORT_ENABLE_DYNAMIC
-
-#undef  CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON
-#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 40000
-
-#define CONFIG_CHARGER_PROFILE_OVERRIDE
-
-#define CONFIG_KEYBOARD_FACTORY_TEST
-
-/* USB-A config */
-#define GPIO_USB1_ILIM_SEL IOEX_USB_A0_CHARGE_EN_L
-#define GPIO_USB2_ILIM_SEL IOEX_USB_A1_CHARGE_EN_DB_L
-
-/* LED */
-#undef CONFIG_LED_ONOFF_STATES
-
-/* Motion sensing drivers */
-#define CONFIG_ACCELGYRO_LSM6DSM
-#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCEL_KX022		/* Lid accel */
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_CMD_ACCELS
-#define CONFIG_CMD_ACCEL_INFO
-#define CONFIG_TABLET_MODE
-#define CONFIG_GMR_TABLET_MODE
-#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-
-
-/* GPIO mapping from board specific name to EC common name. */
-#define CONFIG_BATTERY_PRESENT_GPIO	GPIO_EC_BATT_PRES_ODL
-#define CONFIG_SCI_GPIO			GPIO_EC_FCH_SCI_ODL
-#define GPIO_AC_PRESENT			GPIO_ACOK_OD
-#define GPIO_CPU_PROCHOT		GPIO_PROCHOT_ODL
-#define GPIO_EC_INT_L			GPIO_EC_AP_INT_ODL
-#define GPIO_ENABLE_BACKLIGHT_L		GPIO_EC_EDP_BL_DISABLE
-#define GPIO_ENTERING_RW		GPIO_EC_ENTERING_RW
-#define GPIO_KBD_KSO2			GPIO_EC_KSO_02_INV
-#define GPIO_PCH_PWRBTN_L		GPIO_EC_FCH_PWR_BTN_L
-#define GPIO_PCH_RSMRST_L		GPIO_EC_FCH_RSMRST_L
-#define GPIO_PCH_SLP_S3_L		GPIO_SLP_S3_L
-#define GPIO_PCH_SLP_S5_L		GPIO_SLP_S5_L
-#define GPIO_PCH_SYS_PWROK		GPIO_EC_FCH_PWROK
-#define GPIO_PCH_WAKE_L			GPIO_EC_FCH_WAKE_L
-#define GPIO_POWER_BUTTON_L		GPIO_EC_PWR_BTN_ODL
-#define GPIO_S0_PGOOD			GPIO_S0_PWROK_OD
-#define GPIO_S5_PGOOD			GPIO_EC_PWROK_OD
-#define GPIO_SYS_RESET_L		GPIO_EC_SYS_RST_L
-#define GPIO_VOLUME_DOWN_L		GPIO_VOLDN_BTN_ODL
-#define GPIO_VOLUME_UP_L		GPIO_VOLUP_BTN_ODL
-#define GPIO_WP_L			GPIO_EC_WP_L
-#define GPIO_PACKET_MODE_EN		GPIO_EC_H1_PACKET_MODE
-
-#ifndef __ASSEMBLER__
-
-/* This I2C moved. Temporarily detect and support the V0 HW. */
-extern int I2C_PORT_BATTERY;
-
-enum adc_channel {
-	ADC_TEMP_SENSOR_CHARGER,
-	ADC_TEMP_SENSOR_SOC,
-	ADC_CH_COUNT
-};
-
-enum battery_type {
-	BATTERY_SIMPLO_COS,
-	BATTERY_SIMPLO_HIGHPOWER,
-	BATTERY_SAMSUNG_SDI,
-	BATTERY_DYNAPACK_ATL,
-	BATTERY_DYNAPACK_COS,
-	BATTERY_COSMX,
-	BATTERY_TYPE_COUNT,
-};
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT = 0,
-	PWM_CH_COUNT
-};
-
-enum ioex_port {
-	IOEX_C0_NCT3807 = 0,
-	IOEX_C1_NCT3807,
-	IOEX_PORT_COUNT
-};
-
-#define PORT_TO_HPD(port) ((port == 0) \
-	? GPIO_USB3_C0_DP2_HPD \
-	: GPIO_DP1_HPD)
-
-enum temp_sensor_id {
-	TEMP_SENSOR_CHARGER = 0,
-	TEMP_SENSOR_SOC,
-	TEMP_SENSOR_CPU,
-	TEMP_SENSOR_COUNT
-};
-
-enum usba_port {
-	USBA_PORT_A0 = 0,
-	USBA_PORT_A1,
-	USBA_PORT_COUNT
-};
-
-enum usbc_port {
-	USBC_PORT_C0 = 0,
-	USBC_PORT_C1,
-	USBC_PORT_COUNT
-};
-
-/*****************************************************************************
- * CBI EC FW Configuration
- */
-
-/**
- * DALBOZ_MB_USBAC
- *	USB-A0  Speed: 5 Gbps
- *		Retimer: none
- *	USB-C0  Speed: 5 Gbps
- *		Retimer: none
- *		TCPC: NCT3807
- *		PPC: AOZ1380
- *		IOEX: TCPC
- */
-enum ec_cfg_usb_mb_type {
-	DALBOZ_MB_USBAC = 0,
-};
-
-/**
- * GUMBOZ_DB_OPT1_USBC
- *	USB-A1  Speed: 5 Gbps
- *		Retimer: PS8719
- *	USB-C1  Speed: 5 Gbps
- *		Retimer: PS8743
- *		TCPC: NCT3807
- *		PPC: NX20P3483
- *		IOEX: TCPC
- *	HDMI    Exists: no
- *		Retimer: none
- *		MST Hub: none
- */
-enum ec_cfg_usb_db_type {
-	GUMBOZ_DB_OPT1_USBC = 0,
-};
-
-#include "cbi_ec_fw_config.h"
-
-static inline bool ec_config_has_hdmi_retimer_pi3hdx1204(void)
-{
-	return 0;
-}
-
-void board_reset_pd_mcu(void);
-
-/* Common definition for the USB PD interrupt handlers. */
-void tcpc_alert_event(enum gpio_signal signal);
-void bc12_interrupt(enum gpio_signal signal);
-void ppc_interrupt(enum gpio_signal signal);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/gumboz/build.mk b/board/gumboz/build.mk
deleted file mode 100644
index 1c0cbc4f63..0000000000
--- a/board/gumboz/build.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# -*- makefile -*-
-# Copyright 2020 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m7wc
-BASEBOARD:=zork
-
-board-y=board.o led.o
-board-$(CONFIG_BATTERY_SMART)+=battery.o
diff --git a/board/gumboz/ec.tasklist b/board/gumboz/ec.tasklist
deleted file mode 100644
index d9c1606eb2..0000000000
--- a/board/gumboz/ec.tasklist
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHG_RAMP, chg_ramp_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE)
diff --git a/board/gumboz/gpio.inc b/board/gumboz/gpio.inc
deleted file mode 100644
index 9beaecc17a..0000000000
--- a/board/gumboz/gpio.inc
+++ /dev/null
@@ -1,138 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-GPIO_INT(USB_C0_TCPC_INT_ODL,	PIN(3, 4), GPIO_INT_FALLING,			tcpc_alert_event)
-GPIO_INT(USB_C1_TCPC_INT_ODL,	PIN(F, 1), GPIO_INT_FALLING,			tcpc_alert_event)
-GPIO_INT(USB_C0_PPC_FAULT_ODL,	PIN(6, 3), GPIO_INT_FALLING,			ppc_interrupt)
-GPIO_INT(USB_C1_PPC_INT_ODL,	PIN(D, 4), GPIO_INT_BOTH | GPIO_PULL_UP,	ppc_interrupt)
-GPIO_INT(USB_C0_BC12_INT_ODL,	PIN(9, 3), GPIO_INT_FALLING | GPIO_PULL_UP,	bc12_interrupt)
-GPIO_INT(USB_C1_BC12_INT_ODL, 	PIN(A, 4), GPIO_INT_FALLING | GPIO_PULL_UP,	bc12_interrupt)
-GPIO_INT(SLP_S3_L,		PIN(7, 4), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(SLP_S5_L,		PIN(E, 0), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(S0_PWROK_OD,		PIN(5, 6), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(EC_PWROK_OD,		PIN(3, 7), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(EC_PWR_BTN_ODL,	PIN(0, 1), GPIO_INT_BOTH,			power_button_interrupt)
-GPIO_INT(LID_OPEN,		PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH,	lid_interrupt)
-GPIO_INT(TABLET_MODE_L,		PIN(4, 4), GPIO_INT_BOTH,			gmr_tablet_switch_isr)
-GPIO_INT(ACOK_OD,		PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH,	extpower_interrupt)
-GPIO_INT(EC_WP_L,		PIN(5, 0), GPIO_INT_BOTH,			switch_interrupt)
-GPIO_INT(VOLDN_BTN_ODL,		PIN(A, 6), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
-GPIO_INT(VOLUP_BTN_ODL,		PIN(9, 5), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
-GPIO_INT(6AXIS_INT_L,		PIN(A, 0), GPIO_INT_FALLING | GPIO_PULL_UP,	lsm6dsm_interrupt)
-
-/* GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an interrupt handler. */
-GPIO(EC_RST_ODL,		PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH)
-
-GPIO(3AXIS_INT_L,		PIN(9, 6), GPIO_INPUT | GPIO_PULL_DOWN)		/* 3 Axis Accel */
-GPIO(CCD_MODE_ODL,		PIN(C, 6), GPIO_INPUT)				/* Case Closed Debug Mode */
-GPIO(PROCHOT_ODL,		PIN(D, 5), GPIO_ODR_HIGH)			/* PROCHOT to SOC */
-GPIO(EC_BATT_PRES_ODL,		PIN(4, 1), GPIO_INPUT)				/* Battery Present */
-GPIO(EC_AP_INT_ODL,		PIN(A, 3), GPIO_ODR_HIGH)			/* Sensor MKBP event to SOC */
-GPIO(EN_PWR_A,			PIN(B, 7), GPIO_OUT_LOW)			/* Enable Power */
-GPIO(EC_EDP_BL_DISABLE,		PIN(A, 2), GPIO_OUT_HIGH)			/* Enable Backlight */
-GPIO(EC_ENTERING_RW,		PIN(E, 5), GPIO_OUT_LOW)			/* EC Entering RW */
-GPIO(EC_FCH_PWR_BTN_L,		PIN(6, 7), GPIO_OUT_HIGH)			/* Power Button to SOC */
-GPIO(EC_FCH_RSMRST_L,		PIN(A, 1), GPIO_OUT_LOW)			/* RSMRST# to SOC */
-GPIO(EC_FCH_PWROK,		PIN(7, 0), GPIO_OUT_LOW)			/* Power OK to SOC */
-GPIO(EC_FCH_WAKE_L,		PIN(0, 3), GPIO_OUT_HIGH)			/* Wake SOC */
-GPIO(EC_FCH_SCI_ODL,		PIN(7, 6), GPIO_ODR_HIGH)			/* SCI to SOC */
-GPIO(EC_SYS_RST_L,		PIN(C, 7), GPIO_ODR_HIGH)			/* Cold Reset to SOC */
-GPIO(USB_C0_TCPC_RST_L,		PIN(E, 1), GPIO_OUT_HIGH)			/* C0 TCPC Reset */
-GPIO(USB_C1_TCPC_RST_L,		PIN(F, 0), GPIO_OUT_HIGH)			/* C1 TCPC Reset */
-GPIO(USB3_C0_DP2_HPD,		PIN(F, 5), GPIO_OUT_LOW)			/* C0 DP Hotplug Detect */
-GPIO(DP1_HPD,			PIN(F, 4), GPIO_OUT_LOW)			/* C1 DP Hotplug Detect */
-GPIO(EC_H1_PACKET_MODE,		PIN(8, 6), GPIO_OUT_LOW)			/* H1 Packet Mode */
-
-UNIMPLEMENTED(PCH_SMI_L)
-
-GPIO(LED_FULL_L,		PIN(6, 0), GPIO_OUT_HIGH)
-GPIO(LED_CHRG_L,		PIN(C, 0), GPIO_OUT_HIGH)
-GPIO(PWR_LED_WHITE_L,		PIN(C, 3), GPIO_OUT_HIGH)
-
-/*
- * Gumboz has 1 DB options.
- * IOEX_C1_NCT3807 is the DB (USB-C1).
- */
-
-IOEX_INT(USB_C0_SBU_FAULT_ODL,	EXPIN(IOEX_C0_NCT3807, 1, 2), GPIO_INT_FALLING, sbu_fault_interrupt)
-IOEX_INT(USB_C1_SBU_FAULT_DB_ODL, EXPIN(IOEX_C1_NCT3807, 1, 2), GPIO_INT_FALLING, sbu_fault_interrupt)
-
-IOEX(USB_C0_FAULT_ODL,		EXPIN(IOEX_C0_NCT3807, 0, 3), GPIO_ODR_HIGH)	/* C0 Fault to SOC */
-IOEX(USB_C0_TCPC_FASTSW_CTL_EN,	EXPIN(IOEX_C0_NCT3807, 0, 4), GPIO_OUT_LOW)	/* C0 FastSwitch Control */
-IOEX(USB_C1_FAULT_ODL,		EXPIN(IOEX_C0_NCT3807, 1, 0), GPIO_ODR_HIGH)	/* C1 Fault to SOC */
-IOEX(USB_C0_PPC_ILIM_3A_EN,	EXPIN(IOEX_C0_NCT3807, 1, 1), GPIO_OUT_LOW)	/* C0 3A Current Limit Enable */
-IOEX(KB_BL_EN,			EXPIN(IOEX_C0_NCT3807, 1, 3), GPIO_OUT_LOW)	/* KB Backlight Enable */
-IOEX(EN_USB_A0_5V,		EXPIN(IOEX_C0_NCT3807, 1, 5), GPIO_OUT_LOW)	/* A0 5V Source Enable */
-IOEX(USB_A0_CHARGE_EN_L,	EXPIN(IOEX_C0_NCT3807, 1, 6), GPIO_OUT_HIGH)	/* A0 5V High Current Enable */
-IOEX(USB_C0_SBU_FLIP,		EXPIN(IOEX_C0_NCT3807, 1, 7), GPIO_OUT_LOW)	/* C0 SBU Flip */
-
-IOEX(USB_A1_RETIMER_EN,	EXPIN(IOEX_C1_NCT3807, 0, 0), GPIO_OUT_LOW)	/* A1 Retimer Enable */
-IOEX(USB_C1_HPD_IN_DB,		EXPIN(IOEX_C1_NCT3807, 0, 2), GPIO_OUT_LOW)	/* C1 HPD */
-IOEX(USB_C1_TCPC_FASTSW_CTL_EN,	EXPIN(IOEX_C1_NCT3807, 0, 4), GPIO_OUT_LOW)	/* C1 FastSwitch Control */
-IOEX(USB_C1_PPC_EN_L,		EXPIN(IOEX_C1_NCT3807, 1, 3), GPIO_OUT_LOW)	/* C1 PPC Enable */
-IOEX(USB_C1_DATA_EN,		EXPIN(IOEX_C1_NCT3807, 1, 5), GPIO_OUT_HIGH)	/* C1 Retimer Enable */
-IOEX(EN_USB_A1_5V_DB,	EXPIN(IOEX_C1_NCT3807, 1, 6), GPIO_OUT_LOW)	/* A1 5V Source Enable */
-IOEX(USB_A1_CHARGE_EN_DB_L,EXPIN(IOEX_C1_NCT3807, 1, 7), GPIO_OUT_HIGH)	/* A1 5V High Current Enable */
-IOEX(C1_CHARGER_LED_WHITE_DB,EXPIN(IOEX_C1_NCT3807, 1, 0), GPIO_OUT_HIGH)	/* C1 Charge LED White */
-IOEX(C1_CHARGER_LED_AMBER_DB,EXPIN(IOEX_C1_NCT3807, 1, 4), GPIO_OUT_HIGH)	/* C1 Charge LED Amber */
-
-
-/*
- * The NPCX LPC driver configures and controls SCI, so PCH_SCI_ODL [PIN(7, 6)]
- * is not defined here as GPIO.
- */
-
-/* I2C pins - these will be reconfigured for alternate function below */
-GPIO(EC_I2C_USB_A0_C0_SCL,	PIN(B, 5), GPIO_INPUT)
-GPIO(EC_I2C_USB_A0_C0_SDA,	PIN(B, 4), GPIO_INPUT)
-GPIO(EC_I2C_USB_A1_C1_SCL,	PIN(9, 0), GPIO_INPUT)
-GPIO(EC_I2C_USB_A1_C1_SDA,	PIN(8, 7), GPIO_INPUT)
-GPIO(EC_I2C_POWER_SCL,		PIN(9, 2), GPIO_INPUT)
-GPIO(EC_I2C_POWER_SDA,		PIN(9, 1), GPIO_INPUT)
-GPIO(EC_I2C_USBC_AP_MUX_SCL,	PIN(D, 1), GPIO_INPUT)
-GPIO(EC_I2C_USBC_AP_MUX_SDA,	PIN(D, 0), GPIO_INPUT)
-GPIO(FCH_SIC,			PIN(F, 3), GPIO_INPUT)
-GPIO(FCH_SID,			PIN(F, 2), GPIO_INPUT)
-GPIO(EC_I2C_SENSOR_CBI_SCL,	PIN(3, 3), GPIO_INPUT)
-GPIO(EC_I2C_SENSOR_CBI_SDA,	PIN(3, 6), GPIO_INPUT)
-GPIO(I2C_AUDIO_USB_HUB_SCL,	PIN(E, 4), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(I2C_AUDIO_USB_HUB_SDA,	PIN(E, 3), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C_BATT_SCL,		PIN(B, 3), GPIO_INPUT)
-GPIO(EC_I2C_BATT_SDA,		PIN(B, 2), GPIO_INPUT)
-
-ALTERNATE(PIN_MASK(6, BIT(4) | BIT(5)), 0, MODULE_UART, 0) /* Cr50 requires no pullups. */
-
-ALTERNATE(PIN_MASK(B, BIT(4) | BIT(5)), 0, MODULE_I2C, 0)			/* I2C0 */
-ALTERNATE(PIN_MASK(9, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_I2C, 0)		/* I2C1 SCL / I2C2 */
-ALTERNATE(PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0)				/* I2C1 SDA */
-ALTERNATE(PIN_MASK(D, BIT(0) | BIT(1)), 0, MODULE_I2C, 0)			/* I2C3 */
-ALTERNATE(PIN_MASK(F, BIT(2) | BIT(3)), 0, MODULE_I2C, 0)			/* I2C4 */
-ALTERNATE(PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0)			/* I2C5 */
-ALTERNATE(PIN_MASK(E, BIT(3) | BIT(4)), 0, MODULE_I2C, 0)			/* I2C6 */
-ALTERNATE(PIN_MASK(B, BIT(2) | BIT(3)), 0, MODULE_I2C, 0)			/* I2C7 */
-
-ALTERNATE(PIN_MASK(4, BIT(2) | BIT(3)), 0, MODULE_ADC, 0)			/* ADC2, ADC3 Temp Sensors */
-
-ALTERNATE(PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0)				/* PWM3 KB Backlight */
-
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_00-01 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_02-07 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_00-01 */
-GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW)					/* KSO_02 inverted */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_03-09 */
-ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_10-12 */
-
-/* Power Switch Logic (PSL) inputs */
-ALTERNATE(PIN_MASK(0, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_PMU, 0)		/* AC_PRESENT, POWER_BUTTON_L, EC_RST_ODL */
-ALTERNATE(PIN_MASK(D, BIT(2)), 0, MODULE_PMU, 0)				/* LID_OPEN */
-
-ALTERNATE(PIN_MASK(A, 0xA0), 1,  MODULE_WOV, 0) 				/* I2S_SYNC/I2S_SCLK  GPIOA5/A7 */
-ALTERNATE(PIN_MASK(B, 0x01), 1,  MODULE_WOV, 0) 				/* I2S_SDAT           GPIOB0    */
-ALTERNATE(PIN_MASK(9, 0x90), 1,  MODULE_WOV, 0) 				/* DMIC_CLK/DMIC_IN   GPIO94/97 */
diff --git a/board/gumboz/led.c b/board/gumboz/led.c
deleted file mode 100644
index 0640a6cd21..0000000000
--- a/board/gumboz/led.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "battery.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "chipset.h"
-#include "cros_board_info.h"
-#include "ec_commands.h"
-#include "gpio.h"
-#include "host_command.h"
-#include "led_common.h"
-#include "hooks.h"
-
-#define BAT_LED_ON 0
-#define BAT_LED_OFF 1
-
-#define POWER_LED_ON 0
-#define POWER_LED_OFF 1
-
-#define LED_TICKS_PER_CYCLE 10
-#define LED_ON_TICKS 5
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_LEFT_LED,
-	EC_LED_ID_RIGHT_LED,
-	EC_LED_ID_POWER_LED
-};
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-enum led_color {
-	LED_OFF = 0,
-	LED_AMBER,
-	LED_WHITE,
-	LED_COLOR_COUNT  /* Number of colors, not a color itself */
-};
-
-enum led_port {
-	LEFT_PORT = 0,
-	RIGHT_PORT
-};
-
-static void led_set_color_battery(int port, enum led_color color)
-{
-	enum gpio_signal amber_led, white_led;
-	uint32_t board_ver = 0;
-	int led_batt_on_lvl, led_batt_off_lvl;
-
-	cbi_get_board_version(&board_ver);
-	amber_led = (port == LEFT_PORT ? GPIO_LED_CHRG_L :
-				 IOEX_C1_CHARGER_LED_AMBER_DB);
-	white_led = (port == LEFT_PORT ? GPIO_LED_FULL_L :
-				 IOEX_C1_CHARGER_LED_WHITE_DB);
-
-	if ((board_ver >= 2) && (port == RIGHT_PORT)) {
-		led_batt_on_lvl = 1;
-		led_batt_off_lvl = 0;
-	} else {
-		led_batt_on_lvl = 0;
-		led_batt_off_lvl = 1;
-	}
-
-	switch (color) {
-	case LED_WHITE:
-		gpio_or_ioex_set_level(white_led, led_batt_on_lvl);
-		gpio_or_ioex_set_level(amber_led, led_batt_off_lvl);
-		break;
-	case LED_AMBER:
-		gpio_or_ioex_set_level(white_led, led_batt_off_lvl);
-		gpio_or_ioex_set_level(amber_led, led_batt_on_lvl);
-		break;
-	case LED_OFF:
-		gpio_or_ioex_set_level(white_led, led_batt_off_lvl);
-		gpio_or_ioex_set_level(amber_led, led_batt_off_lvl);
-		break;
-	default:
-		break;
-	}
-}
-
-void led_set_color_power(enum ec_led_colors color)
-{
-	switch (color) {
-	case LED_OFF:
-		gpio_set_level(GPIO_PWR_LED_WHITE_L, POWER_LED_OFF);
-		break;
-	case LED_WHITE:
-		gpio_set_level(GPIO_PWR_LED_WHITE_L, POWER_LED_ON);
-		break;
-	default:
-		break;
-	}
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	switch (led_id) {
-	case EC_LED_ID_LEFT_LED:
-		brightness_range[EC_LED_COLOR_WHITE] = 1;
-		brightness_range[EC_LED_COLOR_AMBER] = 1;
-		break;
-	case EC_LED_ID_RIGHT_LED:
-		brightness_range[EC_LED_COLOR_WHITE] = 1;
-		brightness_range[EC_LED_COLOR_AMBER] = 1;
-		break;
-	case EC_LED_ID_POWER_LED:
-		brightness_range[EC_LED_COLOR_WHITE] = 1;
-		break;
-	default:
-		break;
-	}
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	switch (led_id) {
-	case EC_LED_ID_LEFT_LED:
-		if (brightness[EC_LED_COLOR_WHITE] != 0)
-			led_set_color_battery(LEFT_PORT, LED_WHITE);
-		else if (brightness[EC_LED_COLOR_AMBER] != 0)
-			led_set_color_battery(LEFT_PORT, LED_AMBER);
-		else
-			led_set_color_battery(LEFT_PORT, LED_OFF);
-		break;
-	case EC_LED_ID_RIGHT_LED:
-		if (brightness[EC_LED_COLOR_WHITE] != 0)
-			led_set_color_battery(RIGHT_PORT, LED_WHITE);
-		else if (brightness[EC_LED_COLOR_AMBER] != 0)
-			led_set_color_battery(RIGHT_PORT, LED_AMBER);
-		else
-			led_set_color_battery(RIGHT_PORT, LED_OFF);
-		break;
-	case EC_LED_ID_POWER_LED:
-		if (brightness[EC_LED_COLOR_WHITE] != 0)
-			led_set_color_power(LED_WHITE);
-		else
-			led_set_color_power(LED_OFF);
-		break;
-	default:
-		return EC_ERROR_PARAM1;
-	}
-
-	return EC_SUCCESS;
-}
-
-/*
- * Set active charge port color to the parameter, turn off all others.
- * If no port is active (-1), turn off all LEDs.
- */
-static void set_active_port_color(enum led_color color)
-{
-	int port = charge_manager_get_active_charge_port();
-
-	if (led_auto_control_is_enabled(EC_LED_ID_RIGHT_LED))
-		led_set_color_battery(RIGHT_PORT,
-				(port == RIGHT_PORT) ? color : LED_OFF);
-	if (led_auto_control_is_enabled(EC_LED_ID_LEFT_LED))
-		led_set_color_battery(LEFT_PORT,
-				(port == LEFT_PORT) ? color : LED_OFF);
-}
-
-static void led_set_battery(void)
-{
-	static int battery_ticks;
-	uint32_t chflags = charge_get_flags();
-
-	battery_ticks++;
-
-	switch (charge_get_state()) {
-	case PWR_STATE_CHARGE:
-		/* Always indicate when charging, even in suspend. */
-		set_active_port_color(LED_AMBER);
-		break;
-	case PWR_STATE_DISCHARGE:
-		if (led_auto_control_is_enabled(EC_LED_ID_RIGHT_LED)) {
-			if (charge_get_percent() < 10)
-				led_set_color_battery(RIGHT_PORT,
-					(battery_ticks % LED_TICKS_PER_CYCLE
-					 < LED_ON_TICKS) ? LED_WHITE : LED_OFF);
-			else
-				led_set_color_battery(RIGHT_PORT, LED_OFF);
-		}
-
-		if (led_auto_control_is_enabled(EC_LED_ID_LEFT_LED))
-			led_set_color_battery(LEFT_PORT, LED_OFF);
-		break;
-	case PWR_STATE_ERROR:
-		set_active_port_color((battery_ticks & 0x2) ?
-				LED_WHITE : LED_OFF);
-		break;
-	case PWR_STATE_CHARGE_NEAR_FULL:
-		set_active_port_color(LED_WHITE);
-		break;
-	case PWR_STATE_IDLE: /* External power connected in IDLE */
-		if (chflags & CHARGE_FLAG_FORCE_IDLE)
-			set_active_port_color((battery_ticks %
-				LED_TICKS_PER_CYCLE < LED_ON_TICKS) ?
-				LED_AMBER : LED_OFF);
-		else
-			set_active_port_color(LED_WHITE);
-		break;
-	default:
-		/* Other states don't alter LED behavior */
-		break;
-	}
-}
-
-static void led_set_power(void)
-{
-	static int power_tick;
-
-	power_tick++;
-
-	if (chipset_in_state(CHIPSET_STATE_ON))
-		led_set_color_power(LED_WHITE);
-	else if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND))
-		led_set_color_power((power_tick %
-			LED_TICKS_PER_CYCLE < LED_ON_TICKS) ?
-			LED_WHITE : LED_OFF);
-	else
-		led_set_color_power(LED_OFF);
-}
-
-/* Called by hook task every TICK */
-static void led_tick(void)
-{
-	if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED))
-		led_set_power();
-
-	led_set_battery();
-}
-DECLARE_HOOK(HOOK_TICK, led_tick, HOOK_PRIO_DEFAULT);
diff --git a/board/gumboz/vif_override.xml b/board/gumboz/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/gumboz/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->