Guybrush: Move batteries to board level

Move battery information into the board level in anticipation of them
probably varying with each board.

BRANCH=None
BUG=b:186577625
TEST=make -j buildall, load on guybrush with trembyle battery and ensure
it's identified

Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I1780949746cd30c3033b2c9f36d1ba8f5d331166
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2861055
Reviewed-by: Rob Barnes <robbarnes@google.com>
Commit-Queue: Rob Barnes <robbarnes@google.com>

3 files changed, 70 insertions, 1 deletions

diff --git a/board/guybrush/battery.c b/board/guybrush/battery.c
new file mode 100644
index 0000000000..a7fa6ee449
--- /dev/null
+++ b/board/guybrush/battery.c
@@ -0,0 +1,63 @@
+/* Copyright 2021 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Battery pack vendor provided charging profile
+ */
+
+#include "battery_fuel_gauge.h"
+
+/*
+ * Battery info for all Guybrush battery types. Note that the fields
+ * start_charging_min/max and charging_min/max are not used for the charger.
+ * The effective temperature limits are given by discharging_min/max_c.
+ *
+ * Fuel Gauge (FG) parameters which are used for determining if the battery
+ * is connected, the appropriate ship mode (battery cutoff) command, and the
+ * charge/discharge FETs status.
+ *
+ * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
+ * register. For some batteries, the charge/discharge FET bits are set when
+ * charging/discharging is active, in other types, these bits set mean that
+ * charging/discharging is disabled. Therefore, in addition to the mask for
+ * these bits, a disconnect value must be specified. Note that for TI fuel
+ * gauge, the charge/discharge FET status is found in Operation Status (0x54),
+ * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
+ * Operation status which contains the FET status bits.
+ *
+ * The assumption for battery types supported is that the charge/discharge FET
+ * status can be read with a sb_read() command and therefore, only the register
+ * address, mask, and disconnect value need to be provided.
+ */
+const struct board_batt_params board_battery_info[] = {
+	/* AP18F4M / LIS4163ACPC */
+	[BATTERY_AP18F4M] = {
+		.fuel_gauge = {
+			.manuf_name = "Murata KT00404001",
+			.ship_mode = {
+				.reg_addr = 0x3A,
+				.reg_data = { 0xC574, 0xC574 },
+			},
+			.fet = {
+				.reg_addr = 0x0,
+				.reg_mask = 0x2000,
+				.disconnect_val = 0x2000,
+			}
+		},
+		.batt_info = {
+			.voltage_max          = 8700,
+			.voltage_normal       = 7600,
+			.voltage_min          = 5500,
+			.precharge_current    = 256,
+			.start_charging_min_c = 0,
+			.start_charging_max_c = 50,
+			.charging_min_c       = 0,
+			.charging_max_c       = 60,
+			.discharging_min_c    = -20,
+			.discharging_max_c    = 75,
+		},
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
+
+const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_AP18F4M;
diff --git a/board/guybrush/board.h b/board/guybrush/board.h
index ae6d9fd1cd..bcfbc719bd 100644
--- a/board/guybrush/board.h
+++ b/board/guybrush/board.h
@@ -49,6 +49,12 @@
 /* Motion sensor interrupt */
 void motion_interrupt(enum gpio_signal signal);
 
+/* Battery Types */
+enum battery_type {
+	BATTERY_AP18F4M,
+	BATTERY_TYPE_COUNT,
+};
+
 #endif /* !__ASSEMBLER__ */
 
 #endif /* __CROS_EC_BOARD_H */
diff --git a/board/guybrush/build.mk b/board/guybrush/build.mk
index 4324e2b034..5c8bde1a2b 100644
--- a/board/guybrush/build.mk
+++ b/board/guybrush/build.mk
@@ -9,4 +9,4 @@
 BASEBOARD:=guybrush
 
 board-y=board.o
-board-y+=board_fw_config.o led.o
+board-y+=board_fw_config.o led.o battery.o