baseboard/ite_evb: create ite_evb baseboard

The development board of it83xx and it8xxx2 have common code
and config options which are moved to baseboard ite_evb.

And we create another board for PD EVB based on baseboard ite_evb.

BUG=none
BRANCH=none
TEST=on baseboard ite_evb:
1.test board it83xx_evb and it8xxx2_evb:
successfully Flash EC image and boot on chip it8320 and
it83202.

2.flashrom by ite_spi test:
$ sudo ./util/flash_ec --board=it8xxx2_evb --verbose
INFO: Using servo_v2.
INFO: Using ec image : /mnt/host/source/src/platform/ec/build/
it8xxx2_evb/ec.bin
dut-control --port=9999 i2c_mux_en:on
dut-control --port=9999 i2c_mux:remote_adc
INFO: Flashing chip ite_spi.
dut-control --port=9999 cold_reset:on
dut-control --port=9999 fw_up:on
dut-control --port=9999 cold_reset:off
dut-control --port=9999 fw_up:off
dut-control --port=9999 spi1_vref:pp1800 spi1_buf_en:on
dut-control --port=9999 spi1_buf_on_flex_en:on
INFO: Running flashrom:
 sudo /usr/sbin/flashrom -p ft2232_spi:type=servo-v2,port=B,
serial=911416-00012 --flash-size
flashrom v0.9.9  :  :  on Linux 4.15.0-76-generic (x86_64)
flashrom v0.9.9  :  :  on Linux 4.15.0-76-generic (x86_64)
INFO: Programming EC firmware image.
INFO: Running flashrom:
 /usr/sbin/flashrom -p ft2232_spi:type=servo-v2,port=B,
serial=911416-00012  -w /tmp/flash_spi_6163
flashrom v0.9.9  :  :  on Linux 4.15.0-76-generic (x86_64)
flashrom v0.9.9  :  :  on Linux 4.15.0-76-generic (x86_64)
Calibrating delay loop... OK.
Erasing and writing flash chip... Verifying flash... VERIFIED.
SUCCESS
INFO: Flashing done.
INFO: Restoring servo settings...
dut-control --port=9999 cold_reset:off
dut-control --port=9999 i2c_mux_en:on
dut-control --port=9999 i2c_mux:remote_adc
dut-control --port=9999 spi1_vref:off
dut-control --port=9999 spi1_buf_en:off
dut-control --port=9999 spi1_buf_on_flex_en:off
dut-control --port=9999 cold_reset:on
dut-control --port=9999 cold_reset:off

3.test board it8xxx2_pdevb:
successfully Flash EC image and boot on chip it83202.

Connection with adapter and dongle are able to ready state.

Change-Id: Ib6371b61c27980eb9977548177efb8c896e72d47
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
Signed-off-by: tim <tim2.lin@ite.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2071551
Reviewed-by: Jett Rink <jettrink@chromium.org>

1 files changed, 2 insertions, 78 deletions

diff --git a/board/it83xx_evb/board.h b/board/it83xx_evb/board.h
index 54c66d9b7a..754474174c 100644
--- a/board/it83xx_evb/board.h
+++ b/board/it83xx_evb/board.h
@@ -8,72 +8,17 @@
 #ifndef __CROS_EC_BOARD_H
 #define __CROS_EC_BOARD_H
 
-/* NOTE: 0->ec evb, non-zero->pd evb */
-#define IT83XX_PD_EVB  0
+/* Select Baseboard features */
+#include "baseboard.h"
 
 /* Optional features */
-#define CONFIG_BATTERY_SMART
-#define CONFIG_BOARD_VERSION_GPIO
 #define CONFIG_DAC
-#define CONFIG_FANS 1
-#define CONFIG_I2C
-#define CONFIG_I2C_MASTER
-#define CONFIG_IT83XX_ENABLE_MOUSE_DEVICE
-#define CONFIG_IT83XX_SMCLK2_ON_GPC7
-#define CONFIG_KEYBOARD_BOARD_CONFIG
-#define CONFIG_KEYBOARD_PROTOCOL_8042
-#define CONFIG_LOW_POWER_IDLE
-#define CONFIG_LOW_POWER_S0
-#define CONFIG_PECI
-#define CONFIG_PECI_COMMON
-#define CONFIG_PECI_TJMAX 100
-#define CONFIG_POWER_BUTTON
-#define CONFIG_PWM
-/* Use CS0 of SSPI */
-#define CONFIG_SPI_MASTER
-#define CONFIG_SPI_FLASH_PORT 0
-#define CONFIG_UART_HOST
-#define CONFIG_HOSTCMD_LPC
-
-#if IT83XX_PD_EVB
-/* PD */
-#define CONFIG_USB_PD_ALT_MODE
-#define CONFIG_USB_PD_ALT_MODE_DFP
-#define CONFIG_USB_PD_CHECK_MAX_REQUEST_ALLOWED
-#define CONFIG_USB_PD_CUSTOM_PDO
-#define CONFIG_USB_PD_DUAL_ROLE
-#define CONFIG_USB_PD_PORT_MAX_COUNT    2
-#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP
-#define CONFIG_USB_PD_TRY_SRC
-#define CONFIG_USB_PD_VBUS_DETECT_GPIO
-#define CONFIG_USB_POWER_DELIVERY
-#define CONFIG_USB_PD_TCPMV1
-#define CONFIG_USBC_VCONN
-#define CONFIG_USBC_VCONN_SWAP
-#endif
-
-/* Optional console commands */
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SCRATCHPAD
-#define CONFIG_CMD_STACKOVERFLOW
-
-/* Debug */
-#undef CONFIG_CMD_FORCETIME
-#undef CONFIG_HOOK_DEBUG
-#undef CONFIG_KEYBOARD_DEBUG
-#undef CONFIG_UART_TX_BUF_SIZE
-#define CONFIG_UART_TX_BUF_SIZE 4096
 
 #ifndef __ASSEMBLER__
 
 #include "gpio_signal.h"
 #include "registers.h"
 
-#define I2C_PORT_CHARGER IT83XX_I2C_CH_C
-#define I2C_PORT_BATTERY IT83XX_I2C_CH_C
-
-#include "gpio_signal.h"
-
 enum pwm_channel {
 	PWM_CH_FAN,
 	PWM_CH_WITH_DSLEEP_FLAG,
@@ -92,26 +37,5 @@ enum adc_channel {
 	ADC_CH_COUNT
 };
 
-#if IT83XX_PD_EVB
-/* Define typical operating power and max power */
-#define PD_OPERATING_POWER_MW 15000
-#define PD_MAX_POWER_MW       60000
-#define PD_MAX_CURRENT_MA     3000
-/* Try to negotiate to 20V since i2c noise problems should be fixed. */
-#define PD_MAX_VOLTAGE_MV     20000
-/* TODO: determine the following board specific type-C power constants */
-/*
- * delay to turn on the power supply max is ~16ms.
- * delay to turn off the power supply max is about ~180ms.
- */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY  30000  /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */
-
-/* delay to turn on/off vconn */
-#define PD_VCONN_SWAP_DELAY 5000 /* us */
-
-void board_pd_vbus_ctrl(int port, int enabled);
-#endif
-
 #endif /* !__ASSEMBLER__ */
 #endif /* __CROS_EC_BOARD_H */