ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

8 files changed, 0 insertions, 1199 deletions

diff --git a/board/malefor/battery.c b/board/malefor/battery.c
deleted file mode 100644
index 7f37c6fe10..0000000000
--- a/board/malefor/battery.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all Volteer battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	[BATTERY_SMP] = {
-		.fuel_gauge = {
-			.manuf_name = "SMP",
-			.device_name = "L19M4PG2",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 8800, /* mV */
-			.voltage_normal		= 7680, /* mV */
-			.voltage_min		= 6000, /* mV */
-			.precharge_current	= 332,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 60,
-		},
-	},
-	[BATTERY_LGC] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC",
-			.device_name = "L19L4PG2",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 8800, /* mV */
-			.voltage_normal		= 7700, /* mV */
-			/*
-			 * voltage min value and precharge current value are
-			 * specified by LGC directly and not shown in the SPEC.
-			 */
-			.voltage_min		= 6000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 73,
-		},
-	},
-	[BATTERY_SUNWODA] = {
-		.fuel_gauge = {
-			.manuf_name = "SUNWODA",
-			.device_name = "L19D4PG2",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 8800, /* mV */
-			.voltage_normal		= 7680, /* mV */
-			.voltage_min		= 6000, /* mV */
-			.precharge_current	= 333,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 60,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SMP;
diff --git a/board/malefor/board.c b/board/malefor/board.c
deleted file mode 100644
index 663c5bace9..0000000000
--- a/board/malefor/board.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Malefor board-specific configuration */
-#include "button.h"
-#include "cbi_ec_fw_config.h"
-#include "common.h"
-#include "driver/accel_lis2dh.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/ppc/syv682x.h"
-#include "driver/retimer/bb_retimer_public.h"
-#include "driver/sync.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/tcpm/tusb422.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "tablet_mode.h"
-#include "uart.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_CHIPSET, format, ## args)
-
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
-	/* Increase from 50 us, because KSO_02 passes through the H1. */
-	.output_settle_us = 80,
-	/* Other values should be the same as the default configuration. */
-	.debounce_down_us = 9 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-	.actual_key_mask = {
-		0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
-	},
-};
-
-/******************************************************************************/
-/*
- * FW_CONFIG defaults for Malefor if the CBI data is not initialized.
- */
-union volteer_cbi_fw_config fw_config_defaults = {
-	.usb_db = DB_USB3_NO_A,
-};
-
-static void board_init(void)
-{
-	if (ec_cfg_has_tabletmode()) {
-		/* Enable gpio interrupt for base accelgyro sensor */
-		gpio_enable_interrupt(GPIO_EC_IMU_INT_L);
-	} else {
-		motion_sensor_count = 0;
-		/* Device is clamshell only */
-		tablet_set_mode(0, TABLET_TRIGGER_LID);
-		/* Gyro is not present, don't allow line to float */
-		gpio_set_flags(GPIO_EC_IMU_INT_L, GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-
-	/*
-	 * TODO: b/154447182 - Malefor will control power LED and battery LED
-	 * independently, and keep the max brightness of power LED and battery
-	 * LED as 50%.
-	 */
-	pwm_enable(PWM_CH_LED4_SIDESEL, 1);
-	pwm_set_duty(PWM_CH_LED4_SIDESEL, 50);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-int board_is_lid_angle_tablet_mode(void)
-{
-	return ec_cfg_has_tabletmode();
-}
-
-/* Enable or disable input devices, based on tablet mode or chipset state */
-__override void lid_angle_peripheral_enable(int enable)
-{
-	if (ec_cfg_has_tabletmode()) {
-		if (chipset_in_state(CHIPSET_STATE_ANY_OFF) ||
-			tablet_get_mode())
-			enable = 0;
-		keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE);
-	}
-}
-
-/******************************************************************************/
-/* Sensors */
-/* Lid and base Sensor mutex */
-static struct mutex g_lid_accel_mutex;
-static struct mutex g_base_mutex;
-
-/* Lid and base accel private data */
-static struct stprivate_data g_lis2dh_data;
-static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;
-
-/* Matrix to rotate lid and base sensor into standard reference frame */
-static const mat33_fp_t lid_standard_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-static const mat33_fp_t base_standard_ref = {
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LIS2DE,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &lis2dh_drv,
-		.mutex = &g_lid_accel_mutex,
-		.drv_data = &g_lis2dh_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LIS2DH_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.min_frequency = LIS2DH_ODR_MIN_VAL,
-		.max_frequency = LIS2DH_ODR_MAX_VAL,
-		.default_range = 2, /* g, to support tablet mode */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-				MOTIONSENSE_TYPE_ACCEL),
-		.int_signal = GPIO_EC_IMU_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			/* Sensor on for angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-				MOTIONSENSE_TYPE_GYRO),
-		.int_signal = GPIO_EC_IMU_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-
-const struct fan_conf fan_conf_0 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = MFT_CH_0,	/* Use MFT id to control fan */
-	.pgood_gpio = -1,
-	.enable_gpio = GPIO_EN_PP5000_FAN,
-};
-
-/*
- * Fan specs from datasheet:
- * Max speed 5900 rpm (+/- 7%), minimum duty cycle 30%.
- * Minimum speed not specified by RPM. Set minimum RPM to max speed (with
- * margin) x 30%.
- *    5900 x 1.07 x 0.30 = 1894, round up to 1900
- */
-const struct fan_rpm fan_rpm_0 = {
-	.rpm_min = 1900,
-	.rpm_start = 1900,
-	.rpm_max = 5900,
-};
-
-const struct fan_t fans[FAN_CH_COUNT] = {
-	[FAN_CH_0] = {
-		.conf = &fan_conf_0,
-		.rpm = &fan_rpm_0,
-	},
-};
-
-/******************************************************************************/
-/* EC thermal management configuration */
-
-/*
- * Tiger Lake specifies 100 C as maximum TDP temperature.  THRMTRIP# occurs at
- * 130 C.  However, sensor is located next to DDR, so we need to use the lower
- * DDR temperature limit (85 C)
- */
-const static struct ec_thermal_config thermal_cpu = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-	},
-	.temp_fan_off = C_TO_K(35),
-	.temp_fan_max = C_TO_K(50),
-};
-
-/*
- * Inductor limits - used for both charger and PP3300 regulator
- *
- * Need to use the lower of the charger IC, PP3300 regulator, and the inductors
- *
- * Charger max recommended temperature 100C, max absolute temperature 125C
- * PP3300 regulator: operating range -40 C to 145 C
- *
- * Inductors: limit of 125c
- * PCB: limit is 80c
- */
-const static struct ec_thermal_config thermal_inductor = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-	},
-	.temp_fan_off = C_TO_K(40),
-	.temp_fan_max = C_TO_K(55),
-};
-
-
-struct ec_thermal_config thermal_params[] = {
-	[TEMP_SENSOR_1_CHARGER]			= thermal_inductor,
-	[TEMP_SENSOR_2_PP3300_REGULATOR]	= thermal_inductor,
-	[TEMP_SENSOR_3_DDR_SOC]			= thermal_cpu,
-	[TEMP_SENSOR_4_FAN]			= thermal_cpu,
-};
-BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
-	[MFT_CH_0] = {
-		.module = NPCX_MFT_MODULE_1,
-		.clk_src = TCKC_LFCLK,
-		.pwm_id = PWM_CH_FAN,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/******************************************************************************/
-/* I2C port map configuration */
-const struct i2c_port_t i2c_ports[] = {
-	{
-		.name = "sensor",
-		.port = I2C_PORT_SENSOR,
-		.kbps = 400,
-		.scl = GPIO_EC_I2C0_SENSOR_SCL,
-		.sda = GPIO_EC_I2C0_SENSOR_SDA,
-	},
-	{
-		.name = "usb_c0",
-		.port = I2C_PORT_USB_C0,
-		.kbps = 1000,
-		.scl = GPIO_EC_I2C1_USB_C0_SCL,
-		.sda = GPIO_EC_I2C1_USB_C0_SDA,
-	},
-	{
-		.name = "usb_c1",
-		.port = I2C_PORT_USB_C1,
-		.kbps = 1000,
-		.scl = GPIO_EC_I2C2_USB_C1_SCL,
-		.sda = GPIO_EC_I2C2_USB_C1_SDA,
-	},
-	{
-		.name = "usb_1_mix",
-		.port = I2C_PORT_USB_1_MIX,
-		.kbps = 100,
-		.scl = GPIO_EC_I2C3_USB_1_MIX_SCL,
-		.sda = GPIO_EC_I2C3_USB_1_MIX_SDA,
-	},
-	{
-		.name = "power",
-		.port = I2C_PORT_POWER,
-		.kbps = 100,
-		.scl = GPIO_EC_I2C5_POWER_SCL,
-		.sda = GPIO_EC_I2C5_POWER_SDA,
-	},
-	{
-		.name = "eeprom",
-		.port = I2C_PORT_EEPROM,
-		.kbps = 400,
-		.scl = GPIO_EC_I2C7_EEPROM_SCL,
-		.sda = GPIO_EC_I2C7_EEPROM_SDA,
-	},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/******************************************************************************/
-/* PWM configuration */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_LED4_SIDESEL] = {
-		.channel = 7,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		/* Run at a higher frequency than the color PWM signals to avoid
-		 * timing-based color shifts.
-		 */
-		.freq = 4800,
-	},
-	[PWM_CH_FAN] = {
-		.channel = 5,
-		.flags = PWM_CONFIG_OPEN_DRAIN,
-		.freq = 25000
-	},
-	[PWM_CH_KBLIGHT] = {
-		.channel = 3,
-		.flags = 0,
-		/*
-		 * Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent
-		 * flicker. Higher frequencies consume similar average power to
-		 * lower PWM frequencies, but higher frequencies record a much
-		 * lower maximum power.
-		 */
-		.freq = 2400,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/* USBC TCPC configuration for port 1 on USB3 board */
-static const struct tcpc_config_t tcpc_config_p1_usb3 = {
-	.bus_type = EC_BUS_TYPE_I2C,
-	.i2c_info = {
-		.port = I2C_PORT_USB_C1,
-		.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-	},
-	.flags = TCPC_FLAGS_TCPCI_REV2_0 | TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V,
-	.drv = &ps8xxx_tcpm_drv,
-};
-
-static const struct usb_mux usbc1_usb3_db_retimer = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &tcpci_tcpm_usb_mux_driver,
-	.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	.next_mux = NULL,
-};
-
-static const struct usb_mux mux_config_p1_usb3 = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-	.next_mux = &usbc1_usb3_db_retimer,
-};
-
-void board_reset_pd_mcu(void)
-{
-	int val;
-
-	gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 0);
-	msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS,
-			   PS8815_PWR_H_RST_H_DELAY_MS));
-	gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 1);
-	msleep(PS8815_FW_INIT_DELAY_MS);
-
-	/*
-	 * b/144397088
-	 * ps8815 firmware 0x01 needs special configuration
-	 */
-
-	CPRINTS("%s: patching ps8815 registers", __func__);
-
-	if (i2c_read8(I2C_PORT_USB_C1,
-		      PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f was %02x", val);
-
-	if (i2c_write8(I2C_PORT_USB_C1,
-		       PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, 0x31) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f set to 0x31");
-
-	if (i2c_read8(I2C_PORT_USB_C1,
-		      PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f now %02x", val);
-}
-
-__override void board_cbi_init(void)
-{
-	/* Config DB USB3 */
-	tcpc_config[USBC_PORT_C1] = tcpc_config_p1_usb3;
-	usb_muxes[USBC_PORT_C1] = mux_config_p1_usb3;
-}
-
-/******************************************************************************/
-/* USBC PPC configuration */
-struct ppc_config_t ppc_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
-		.drv = &sn5s330_drv,
-	},
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_USB_C1,
-		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
-		.drv = &syv682x_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
-unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
-
-/******************************************************************************/
-/* PPC support routines */
-void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_INT_ODL:
-		sn5s330_interrupt(USBC_PORT_C0);
-		break;
-	case GPIO_USB_C1_PPC_INT_ODL:
-		syv682x_interrupt(USBC_PORT_C1);
-	default:
-		break;
-	}
-}
-
-/******************************************************************************/
-/* BC1.2 charger detect configuration */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_USB_C1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);
-
-/******************************************************************************/
-/* USBC TCPC configuration */
-struct tcpc_config_t tcpc_config[] = {
-	[USBC_PORT_C0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0,
-			.addr_flags = TUSB422_I2C_ADDR_FLAGS,
-		},
-		.drv = &tusb422_tcpm_drv,
-	},
-	[USBC_PORT_C1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C1,
-			.addr_flags = TUSB422_I2C_ADDR_FLAGS,
-		},
-		.drv = &tusb422_tcpm_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
-BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);
-
-/******************************************************************************/
-/* USBC mux configuration - Tiger Lake includes internal mux */
-struct usb_mux usbc1_tcss_usb_mux = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-};
-struct usb_mux usb_muxes[] = {
-	[USBC_PORT_C0] = {
-		.usb_port = USBC_PORT_C0,
-		.driver = &virtual_usb_mux_driver,
-		.hpd_update = &virtual_hpd_update,
-	},
-	[USBC_PORT_C1] = {
-		.usb_port = USBC_PORT_C1,
-		.next_mux = &usbc1_tcss_usb_mux,
-		.driver = &bb_usb_retimer,
-		.hpd_update = bb_retimer_hpd_update,
-		.i2c_port = I2C_PORT_USB_1_MIX,
-		.i2c_addr_flags = USBC_PORT_C1_BB_RETIMER_I2C_ADDR,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
-
-struct bb_usb_control bb_controls[] = {
-	[USBC_PORT_C0] = {
-		/* USB-C port 0 doesn't have a retimer */
-	},
-	[USBC_PORT_C1] = {
-		.usb_ls_en_gpio = GPIO_USB_C1_LS_EN,
-		.retimer_rst_gpio = GPIO_USB_C1_RT_RST_ODL,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(bb_controls) == USBC_PORT_COUNT);
-
-static void board_tcpc_init(void)
-{
-	/* Don't reset TCPCs after initial reset */
-	if (!system_jumped_late())
-		board_reset_pd_mcu();
-
-	/* Enable PPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);
-
-	/* Enable TCPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);
-
-	/* Enable BC1.2 interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
-}
-DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_CHIPSET);
-
-/******************************************************************************/
-/* TCPC support routines */
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	/*
-	 * Check which port has the ALERT line set
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL))
-		status |= PD_STATUS_TCPC_ALERT_0;
-	if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL))
-		status |= PD_STATUS_TCPC_ALERT_1;
-
-	return status;
-}
-
-int ppc_get_alert_status(int port)
-{
-	if (port == USBC_PORT_C0)
-		return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0;
-	else
-		return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0;
-}
diff --git a/board/malefor/board.h b/board/malefor/board.h
deleted file mode 100644
index e21984350d..0000000000
--- a/board/malefor/board.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Baseboard features */
-#include "baseboard.h"
-
-/* Optional features */
-#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands while in dev. */
-
-#define CONFIG_VBOOT_EFS2
-
-#define CONFIG_POWER_BUTTON
-
-#undef CONFIG_UART_TX_BUF_SIZE
-#define CONFIG_UART_TX_BUF_SIZE 4096
-
-/* LED defines */
-#define CONFIG_LED_ONOFF_STATES
-
-/* Keyboard features */
-
-/* Sensors */
-#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
-#define CONFIG_ACCEL_LIS2DE             /* Lid accel */
-#define CONFIG_ACCELGYRO_LSM6DSM        /* Base accel */
-
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK \
-	BIT(LID_ACCEL)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-/* USB Type C and USB PD defines */
-#define CONFIG_USB_PD_PORT_MAX_COUNT			2
-
-#define PD_POWER_SUPPLY_TURN_ON_DELAY	30000 /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY	30000 /* us */
-
-/*
- * SN5S30 PPC supports up to 24V VBUS source and sink, however passive USB-C
- * cables only support up to 60W.
- */
-#define PD_OPERATING_POWER_MW	15000
-#define PD_MAX_POWER_MW		60000
-#define PD_MAX_CURRENT_MA	3000
-#define PD_MAX_VOLTAGE_MV	20000
-/* Enabling USB4 mode */
-#define USBC_PORT_C1_BB_RETIMER_I2C_ADDR	0x40
-
-/* USB Type A Features */
-
-/* USBC PPC*/
-#define CONFIG_USBC_PPC_SN5S330		/* USBC port C0 */
-#define CONFIG_USBC_PPC_SYV682X		/* USBC port C1 */
-
-/* BC 1.2 */
-
-/* Volume Button feature */
-
-/* Fan features */
-
-/* charger defines */
-#define CONFIG_CHARGER_SENSE_RESISTOR		10
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC	10
-
-/*
- * Macros for GPIO signals used in common code that don't match the
- * schematic names. Signal names in gpio.inc match the schematic and are
- * then redefined here to so it's more clear which signal is being used for
- * which purpose.
- */
-#define GPIO_AC_PRESENT			GPIO_ACOK_OD
-#define GPIO_EC_INT_L			GPIO_EC_PCH_INT_ODL
-#define GPIO_EN_PP5000			GPIO_EN_PP5000_A
-#define GPIO_ENTERING_RW		GPIO_EC_ENTERING_RW
-#define GPIO_LID_OPEN			GPIO_EC_LID_OPEN
-#define GPIO_KBD_KSO2			GPIO_EC_KSO_02_INV
-#define GPIO_PACKET_MODE_EN		GPIO_UART2_EC_RX
-#define GPIO_PCH_WAKE_L			GPIO_EC_PCH_WAKE_ODL
-#define GPIO_PCH_PWRBTN_L		GPIO_EC_PCH_PWR_BTN_ODL
-#define GPIO_PCH_RSMRST_L		GPIO_EC_PCH_RSMRST_ODL
-#define GPIO_PCH_RTCRST			GPIO_EC_PCH_RTCRST
-#define GPIO_PCH_SYS_PWROK		GPIO_EC_PCH_SYS_PWROK
-#define GPIO_PCH_SLP_S0_L		GPIO_SLP_S0_L
-#define GPIO_PCH_SLP_S3_L		GPIO_SLP_S3_L
-#define GPIO_PG_EC_DSW_PWROK		GPIO_DSW_PWROK
-#define GPIO_POWER_BUTTON_L		GPIO_H1_EC_PWR_BTN_ODL
-#define GPIO_RSMRST_L_PGOOD		GPIO_PG_EC_RSMRST_ODL
-#define GPIO_CPU_PROCHOT		GPIO_EC_PROCHOT_ODL
-#define GPIO_SYS_RESET_L		GPIO_SYS_RST_ODL
-#define GPIO_WP_L			GPIO_EC_WP_L
-#define GPIO_USB_C1_BC12_INT_ODL	GPIO_USB_C1_MIX_INT_ODL
-#define GPIO_VOLUME_UP_L		GPIO_EC_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L		GPIO_EC_VOLDN_BTN_ODL
-#define GMR_TABLET_MODE_GPIO_L		GPIO_TABLET_MODE_L
-
-/* I2C Bus Configuration */
-#define CONFIG_I2C
-#define I2C_PORT_SENSOR		NPCX_I2C_PORT0_0
-#define I2C_PORT_USB_C0		NPCX_I2C_PORT1_0
-#define I2C_PORT_USB_C1		NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_1_MIX	NPCX_I2C_PORT3_0
-#define I2C_PORT_POWER		NPCX_I2C_PORT5_0
-#define I2C_PORT_EEPROM		NPCX_I2C_PORT7_0
-
-#define I2C_PORT_BATTERY	I2C_PORT_POWER
-#define I2C_PORT_CHARGER	I2C_PORT_EEPROM
-
-#define I2C_ADDR_EEPROM_FLAGS	0x50
-#define CONFIG_I2C_CONTROLLER
-
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum battery_type {
-	BATTERY_SMP,
-	BATTERY_LGC,
-	BATTERY_SUNWODA,
-	BATTERY_TYPE_COUNT,
-};
-
-enum pwm_channel {
-	PWM_CH_LED4_SIDESEL = 0,
-	PWM_CH_FAN,
-	PWM_CH_KBLIGHT,
-	PWM_CH_COUNT
-};
-
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT,
-};
-
-enum usbc_port {
-	USBC_PORT_C0 = 0,
-	USBC_PORT_C1,
-	USBC_PORT_COUNT
-};
-
-void board_reset_pd_mcu(void);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/malefor/build.mk b/board/malefor/build.mk
deleted file mode 100644
index 279b2e559e..0000000000
--- a/board/malefor/build.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-# -*- makefile -*-
-# Copyright 2020 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m6fc
-BASEBOARD:=volteer
-
-board-y=board.o
-board-y+=battery.o
-board-y+=led.o
diff --git a/board/malefor/ec.tasklist b/board/malefor/ec.tasklist
deleted file mode 100644
index 292de51cdb..0000000000
--- a/board/malefor/ec.tasklist
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHG_RAMP, chg_ramp_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE)
diff --git a/board/malefor/gpio.inc b/board/malefor/gpio.inc
deleted file mode 100644
index 6f770eb17a..0000000000
--- a/board/malefor/gpio.inc
+++ /dev/null
@@ -1,163 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* Wake Source interrupts */
-GPIO_INT(EC_LID_OPEN,          PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt)
-GPIO_INT(EC_WP_L,              PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
-GPIO_INT(H1_EC_PWR_BTN_ODL,    PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)
-GPIO_INT(ACOK_OD,              PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt)
-
-/* Power sequencing interrupts */
-GPIO_INT(SLP_S0_L,             PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt)
-#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3
-GPIO_INT(SLP_S3_L,             PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt)
-#endif
-GPIO_INT(SLP_SUS_L,            PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_EC_RSMRST_ODL,     PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(DSW_PWROK,            PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_EC_ALL_SYS_PWRGD,  PIN(F, 4),  GPIO_INT_BOTH, power_signal_interrupt)
-
-/* Sensor Interrupts */
-GPIO_INT(EC_IMU_INT_L,         PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, lsm6dsm_interrupt)
-GPIO_INT(TABLET_MODE_L,        PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr)
-
-/* USB-C interrupts */
-GPIO_INT(USB_C0_TCPC_INT_ODL,	PIN(E, 0), GPIO_INT_BOTH, tcpc_alert_event)
-GPIO_INT(USB_C1_TCPC_INT_ODL,	PIN(A, 2), GPIO_INT_BOTH, tcpc_alert_event)
-
-GPIO_INT(USB_C0_PPC_INT_ODL,	PIN(6, 2), GPIO_INT_BOTH, ppc_interrupt)
-GPIO_INT(USB_C1_PPC_INT_ODL,	PIN(F, 5), GPIO_INT_BOTH, ppc_interrupt)
-
-GPIO_INT(USB_C0_BC12_INT_ODL,	PIN(E, 4), GPIO_INT_BOTH, bc12_interrupt)
-GPIO_INT(USB_C1_MIX_INT_ODL,	PIN(0, 3), GPIO_INT_BOTH, bc12_interrupt)
-
-/* HDMI interrupts */
-
-/* Volume button interrupts */
-GPIO_INT(EC_VOLDN_BTN_ODL,		PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
-GPIO_INT(EC_VOLUP_BTN_ODL,		PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
-
-/* Power Sequencing Signals */
-GPIO(EN_PP3300_A,              PIN(A, 3), GPIO_OUT_LOW)
-GPIO(EN_PP5000_A,              PIN(A, 4), GPIO_OUT_LOW)
-GPIO(EN_PPVAR_VCCIN,           PIN(4, 3), GPIO_OUT_LOW) /* Enables VCCIN IMPV9 */
-/* The EC does not buffer this signal on Volteer. */
-UNIMPLEMENTED(PCH_DSW_PWROK)
-
-/* Other wake sources */
-/*
- * GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an
- * interrupt handler because it is automatically handled by the PSL.
- *
- * We need to lock the setting so this gpio can't be reconfigured to overdrive
- * the real reset signal. (This is the PSL input pin not the real reset pin).
- */
-GPIO(EC_RST_ODL,		PIN(0, 2), GPIO_INT_BOTH |
-					   GPIO_HIB_WAKE_HIGH |
-					   GPIO_LOCKED)
-
-/* AP/PCH Signals */
-GPIO(EC_PCH_SYS_PWROK,         PIN(3, 7), GPIO_OUT_LOW)
-GPIO(EC_PCH_RSMRST_ODL,        PIN(A, 6), GPIO_ODR_LOW) /* TODO - b/140950085 - implement TGL sequencing requirement */
-GPIO(EC_PCH_PWR_BTN_ODL,       PIN(C, 1), GPIO_ODR_HIGH)
-GPIO(EC_PCH_RTCRST,            PIN(7, 6), GPIO_OUT_LOW)
-GPIO(EC_PCH_WAKE_ODL,          PIN(7, 4), GPIO_ODR_HIGH)
-GPIO(EC_ENTERING_RW,           PIN(E, 3), GPIO_OUT_LOW)
-GPIO(EC_PROCHOT_ODL,           PIN(6, 3), GPIO_ODR_HIGH)
-UNIMPLEMENTED(EC_PROCHOT_IN_L)
-GPIO(SYS_RST_ODL,              PIN(C, 5), GPIO_ODR_HIGH)
-
-GPIO(EC_PCH_INT_ODL,           PIN(B, 0), GPIO_ODR_HIGH)
-
-/* USB and USBC Signals */
-GPIO(USB_C1_RT_RST_ODL,			PIN(8, 3), GPIO_ODR_LOW) /* USB_C1 Reset on boards board ID >=1 */
-GPIO(USB_C0_OC_ODL,			PIN(B, 1), GPIO_ODR_HIGH)
-GPIO(USB_C1_OC_ODL,			PIN(5, 0), GPIO_ODR_HIGH)
-
-/* Don't have a load switch for retimer */
-UNIMPLEMENTED(USB_C1_LS_EN)
-
-/* Misc Signals */
-GPIO(UART2_EC_RX,		PIN(7, 5), GPIO_OUT_LOW)
-
-/*
- * eDP backlight - both PCH and EC have enable pins that must be high
- * for the backlight to turn on. Default state is high, and can be turned
- * off during sleep states.
- */
-GPIO(EC_EDP_BL_EN,             PIN(D, 3), GPIO_OUT_HIGH)
-
-/* I2C pins - Alternate function below configures I2C module on these pins */
-GPIO(EC_I2C0_SENSOR_SCL,       PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C0_SENSOR_SDA,       PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C1_USB_C0_SCL,       PIN(9, 0), GPIO_INPUT)
-GPIO(EC_I2C1_USB_C0_SDA,       PIN(8, 7), GPIO_INPUT)
-GPIO(EC_I2C2_USB_C1_SCL,       PIN(9, 2), GPIO_INPUT)
-GPIO(EC_I2C2_USB_C1_SDA,       PIN(9, 1), GPIO_INPUT)
-GPIO(EC_I2C3_USB_1_MIX_SCL,    PIN(D, 1), GPIO_INPUT)
-GPIO(EC_I2C3_USB_1_MIX_SDA,    PIN(D, 0), GPIO_INPUT)
-GPIO(EC_I2C5_POWER_SCL,        PIN(3, 3), GPIO_INPUT)
-GPIO(EC_I2C5_POWER_SDA,        PIN(3, 6), GPIO_INPUT)
-GPIO(EC_I2C7_EEPROM_SCL,       PIN(B, 3), GPIO_INPUT)
-GPIO(EC_I2C7_EEPROM_SDA,       PIN(B, 2), GPIO_INPUT)
-
-/* Battery signals */
-GPIO(EC_BATT_PRES_ODL, 		PIN(E, 1), GPIO_INPUT)
-
-/* Physical HPD pins are not needed on EC as these are configured by PMC */
-GPIO(USB_C0_DP_HPD,		PIN(F, 3), GPIO_INPUT)
-GPIO(USB_C1_DP_HPD,		PIN(7, 0), GPIO_INPUT)
-
-/* LED */
-GPIO(LED_1_L,	 PIN(C, 4), GPIO_OUT_HIGH)	/* Battery - Green LED */
-GPIO(LED_2_L,	 PIN(C, 3), GPIO_OUT_HIGH)	/* Battery - Red LED */
-GPIO(LED_3_L,	 PIN(C, 2), GPIO_OUT_HIGH)	/* Power - White LED */
-
-/* Alternate functions GPIO definitions */
-ALTERNATE(PIN_MASK(B, BIT(5) | BIT(4)), 0, MODULE_I2C, (GPIO_INPUT | GPIO_SEL_1P8V)) /* I2C0 */
-ALTERNATE(PIN_MASK(9, BIT(0) | BIT(2) | BIT(1)), 0, MODULE_I2C, 0)                   /* I2C1 SCL / I2C2 */
-ALTERNATE(PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0)                                     /* I2C1 SDA */
-ALTERNATE(PIN_MASK(D, BIT(1) | BIT(0)), 0, MODULE_I2C, 0)                            /* I2C3 */
-ALTERNATE(PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0)                            /* I2C5 */
-ALTERNATE(PIN_MASK(B, BIT(3) | BIT(2)), 0, MODULE_I2C, 0)                            /* I2C7 */
-
-/* This selects between an LED module on the motherboard and one on the daughter
- * board, to be controlled by LED_{1,2,3}_L. PWM allows driving both modules at
- * the same time. */
-ALTERNATE(PIN_MASK(6, BIT(0)), 0, MODULE_PWM, 0)                                     /* LED_SIDESEL_4_L */
-
-/* Fan signals */
-GPIO(EN_PP5000_FAN,            PIN(6, 1), GPIO_OUT_LOW)
-ALTERNATE(PIN_MASK(B, BIT(7)), 0, MODULE_PWM, 0)	/* FAN_PWM */
-ALTERNATE(PIN_MASK(4, BIT(0)), 0, MODULE_PWM, 0)	/* FAN_SPEED_TACH */
-
-/* Keyboard pins */
-#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP)
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_00-01 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_02-07 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */
-GPIO(EC_KSO_02_INV, PIN(1, 7),                        GPIO_OUT_LOW)  /* KSO_02 */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */
-ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-13 */
-ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_14 */
-ALTERNATE(PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0)                     /* EC_KB_BL_PWM */
-
-/* UART */
-ALTERNATE(PIN_MASK(6, BIT(5) | BIT(4)), 0, MODULE_UART, 0)                           /* UART from EC to Servo */
-
-/* Power Switch Logic (PSL) inputs */
-ALTERNATE(PIN_MASK(D, BIT(2)), 0, MODULE_PMU, 0)                    /* GPIOD2 = EC_LID_OPEN */
-ALTERNATE(PIN_MASK(0, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_PMU, 0)  /* GPIO00 = ACOK_OD,
-                                                                       GPIO01 = H1_EC_PWR_BTN_ODL
-                                                                       GPIO02 = EC_RST_ODL */
-
-/* Temperature sensors */
-ALTERNATE(PIN_MASK(4, BIT(2) | BIT(4) | BIT(5)), 0, MODULE_ADC, 0) /* TEMP_SENSOR1,2,4 */
-ALTERNATE(PIN(F, 1), 0, MODULE_ADC, 0) /* TEMP_SENSOR3 */
diff --git a/board/malefor/led.c b/board/malefor/led.c
deleted file mode 100644
index 0f7d37723b..0000000000
--- a/board/malefor/led.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control for Malefor
- */
-
-#include "common.h"
-#include "led_onoff_states.h"
-#include "led_common.h"
-#include "gpio.h"
-
-#define LED_OFF_LVL	1
-#define LED_ON_LVL	0
-
-__override const int led_charge_lvl_1 = 5;
-
-__override const int led_charge_lvl_2 = 97;
-
-__override struct led_descriptor
-			led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
-	[STATE_CHARGING_LVL_1]	     = {{EC_LED_COLOR_RED,   LED_INDEFINITE} },
-	[STATE_CHARGING_LVL_2]	     = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
-	[STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_GREEN, LED_INDEFINITE} },
-	[STATE_DISCHARGE_S0]	     = {{LED_OFF,            LED_INDEFINITE} },
-	[STATE_DISCHARGE_S3]	     = {{LED_OFF,            LED_INDEFINITE} },
-	[STATE_DISCHARGE_S5]         = {{LED_OFF,            LED_INDEFINITE} },
-	[STATE_BATTERY_ERROR]        = {{EC_LED_COLOR_RED,   1 * LED_ONE_SEC},
-					{LED_OFF,	     1 * LED_ONE_SEC} },
-	[STATE_FACTORY_TEST]         = {{EC_LED_COLOR_RED,   2 * LED_ONE_SEC},
-					{EC_LED_COLOR_GREEN, 2 * LED_ONE_SEC} },
-};
-
-__override const struct led_descriptor
-		led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = {
-	[PWR_LED_STATE_ON]            = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
-	[PWR_LED_STATE_SUSPEND_AC]    = {{EC_LED_COLOR_WHITE, 3 * LED_ONE_SEC},
-					 {LED_OFF,         0.5 * LED_ONE_SEC} },
-	[PWR_LED_STATE_SUSPEND_NO_AC] = {{LED_OFF,            LED_INDEFINITE} },
-	[PWR_LED_STATE_OFF]           = {{LED_OFF,            LED_INDEFINITE} },
-};
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_BATTERY_LED,
-	EC_LED_ID_POWER_LED
-};
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-__override void led_set_color_power(enum ec_led_colors color)
-{
-	if (color == EC_LED_COLOR_WHITE)
-		gpio_set_level(GPIO_LED_3_L, LED_ON_LVL);
-	else
-		/* LED_OFF and unsupported colors */
-		gpio_set_level(GPIO_LED_3_L, LED_OFF_LVL);
-}
-
-__override void led_set_color_battery(enum ec_led_colors color)
-{
-	switch (color) {
-	case EC_LED_COLOR_RED:
-		gpio_set_level(GPIO_LED_1_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_LED_2_L, LED_ON_LVL);
-		break;
-	case EC_LED_COLOR_AMBER:
-		gpio_set_level(GPIO_LED_1_L, LED_ON_LVL);
-		gpio_set_level(GPIO_LED_2_L, LED_ON_LVL);
-		break;
-	case EC_LED_COLOR_GREEN:
-		gpio_set_level(GPIO_LED_1_L, LED_ON_LVL);
-		gpio_set_level(GPIO_LED_2_L, LED_OFF_LVL);
-		break;
-	default: /* LED_OFF and other unsupported colors */
-		gpio_set_level(GPIO_LED_1_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_LED_2_L, LED_OFF_LVL);
-		break;
-	}
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	if (led_id == EC_LED_ID_BATTERY_LED) {
-		brightness_range[EC_LED_COLOR_RED] = 1;
-		brightness_range[EC_LED_COLOR_AMBER] = 1;
-		brightness_range[EC_LED_COLOR_GREEN] = 1;
-	} else if (led_id == EC_LED_ID_POWER_LED) {
-		brightness_range[EC_LED_COLOR_WHITE] = 1;
-	}
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	if (led_id == EC_LED_ID_BATTERY_LED) {
-		if (brightness[EC_LED_COLOR_RED] != 0)
-			led_set_color_battery(EC_LED_COLOR_RED);
-		else if (brightness[EC_LED_COLOR_AMBER] != 0)
-			led_set_color_battery(EC_LED_COLOR_AMBER);
-		else if (brightness[EC_LED_COLOR_GREEN] != 0)
-			led_set_color_battery(EC_LED_COLOR_GREEN);
-		else
-			led_set_color_battery(LED_OFF);
-	} else if (led_id == EC_LED_ID_POWER_LED) {
-		if (brightness[EC_LED_COLOR_WHITE] != 0)
-			led_set_color_power(EC_LED_COLOR_WHITE);
-		else
-			led_set_color_power(LED_OFF);
-	}
-
-	return EC_SUCCESS;
-}
diff --git a/board/malefor/vif_override.xml b/board/malefor/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/malefor/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->