ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 450 deletions

diff --git a/board/mchpevb1/gpio.inc b/board/mchpevb1/gpio.inc
deleted file mode 100644
index 8be1099fbd..0000000000
--- a/board/mchpevb1/gpio.inc
+++ /dev/null
@@ -1,450 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2017 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * mec1701h_evb board GPIO pins
- * !!!!!!!!!!!!!!!!!!!!!!! IMPORTANT !!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * MEC1701 and MEC1322 data sheets GPIO numbers are OCTAL.
- * Original glados MEC1322 used these octal numbers as base 10.
- * mec1701 and its boards will use OCTAL therefore make sure all
- * numbers used below are written as C OCTAL with a leading 0.
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- *
- */
-/* NOTE: We use JTAG on MEC1701H on EVB.
- * GPIO_0145 is JTAG_TDI
- * GPIO_0146 is JTAG_TDO
- * GPIO_0147 is JTAG_CLK
- * GPIO_0150 is JTAG_TMS
- */
-
-/* include common gpio.inc under chip/mchp/lfw/... */
-#include "chip/mchp/lfw/gpio.inc"
-
-#define GPIO_BOTH_EDGES_PU (GPIO_INT_BOTH | GPIO_PULL_UP)
-
-/* Only needed if CONFIG_HOSTCMD_ESPI is not set, using LPC interface to PCH */
-#ifndef CONFIG_HOSTCMD_ESPI
-GPIO_INT(PCH_PLTRST_L, PIN(064), GPIO_BOTH_EDGES_PU, lpcrst_interrupt)
-#endif
-
-/* MEC1701H GPIO_0015/PWM7 OK */
-GPIO_INT(LID_OPEN, PIN(015), GPIO_INT_BOTH | GPIO_PULL_UP, lid_interrupt)
-/* MEC1701H GPIO_0014/PWM6/GPTP-IN6 OK */
-GPIO_INT(AC_PRESENT, PIN(014), GPIO_INT_BOTH, extpower_interrupt)
-
-/* MEC1701H GPIO_0036/RC_ID2 OK */
-/* Kabylake bringup move to gpio input */
-/* GPIO_INT(WP_L, PIN(036), GPIO_INT_BOTH, switch_interrupt) */
-
-/* Buffered power button input from PMIC / ROP_EC_PWR_BTN_L_R */
-/* MEC1701H GPIO_0023/GPTP-IN1/MVP_VR_ON OK */
-GPIO_INT(POWER_BUTTON_L, PIN(023), GPIO_INT_BOTH, power_button_interrupt)
-
-/* RSMRST from PMIC */
-/* MEC1701H GPIO_0057/VCC_PWRGD OK */
-GPIO_INT(RSMRST_L_PGOOD, PIN(0126), GPIO_INT_BOTH, power_signal_interrupt)
-
-/* Remove. SLP_S3,S4 are eSPI virtual wires
-GPIO_INT(PCH_SLP_S4_L, PIN(0200), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PCH_SLP_S3_L, PIN(0206), GPIO_INT_BOTH, power_signal_interrupt)
-*/
-
-/* MEC1701H GPIO_0175/KSO17 OK */
-GPIO_INT(PCH_SLP_SUS_L, PIN(0175), GPIO_INT_BOTH, power_signal_interrupt)
-
-/*
- * Handle ALL_SYS_PWRGD from SKL RVP3 board
- */
-GPIO_INT(ALL_SYS_PWRGD, PIN(057), GPIO_INT_BOTH, all_sys_pwrgd_interrupt)
-
-/* Kabylake bring up move to ordinary GPIO input */
-/* MEC1701H GPIO_0034/RC_ID1/SPI0_CLK */
-/*
- *GPIO_INT(VOLUME_UP_L, PIN(034), \
- *GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
- */
-/* MEC1701H GPIO_035/PWM8/CTOUT1 OK */
-/*
- *GPIO_INT(VOLUME_DOWN_L, PIN(035), GPIO_INT_BOTH | GPIO_PULL_UP, \
- *	 button_interrupt)
- */
-
-/* MEC1701H GPIO_0161/VCI_IN2# OK */
-GPIO_INT(PMIC_INT_L, PIN(0161), GPIO_INT_FALLING, power_signal_interrupt)
-
- /* MEC1701H GPIO_0162/VCI_IN1# OK */
-/* GPIO_INT(PD_MCU_INT,        PIN(0162), \
-	 GPIO_INT_FALLING | GPIO_PULL_UP, pd_mcu_interrupt) */
-/* MEC1701H GPIO_0242/ISPI_CLK OK */
-/* GPIO_INT(USB_C0_VBUS_WAKE_L,PIN(0242), GPIO_INT_BOTH, vbus0_evt) */
-/* MEC1701H GPIO_0243/ISPI_IO0 OK */
-/* GPIO_INT(USB_C1_VBUS_WAKE_L,PIN(0243), GPIO_INT_BOTH, vbus1_evt) */
-/* MEC1701H GPIO_0240/INT_IO3 OK */
-/* GPIO_INT(USB_C0_BC12_INT_L, PIN(0240), GPIO_INT_FALLING, usb0_evt) */
-/* MEC1701H GPIO_0241/ISPI_CS# OK */
-/* GPIO_INT(USB_C1_BC12_INT_L, PIN(0241), GPIO_INT_FALLING, usb1_evt) */
-/* MEC1701H GPIO_0100/nEC_SCI OK */
-GPIO_INT(TABLET_MODE_L, PIN(0100), GPIO_INT_BOTH | GPIO_PULL_UP, \
-	 tablet_mode_interrupt)
-/* Delayed PWR_OK from PMIC */
-/* MEC1701H GPIO_0151/ICT4/KSO15 OK */
-GPIO_INT(PMIC_DPWROK, PIN(0151), GPIO_INT_BOTH, power_signal_interrupt)
-/* UART input */
-/* MEC1701H GPIO_0105/UART0_RX OK */
-GPIO_INT(UART0_RX, PIN(0105), GPIO_INT_BOTH_DSLEEP | GPIO_PULL_UP, \
-	 uart_deepsleep_interrupt)
-
-
-/* GPIO Pins not interrupt enabled */
-
-/* Kabylake bring up move to ordinary GPIO input */
-GPIO(VOLUME_UP_L,       PIN(034), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(VOLUME_DOWN_L,     PIN(035), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(WP_L,              PIN(036), GPIO_INPUT)
-/*
- * TODO GP-SPI0 for testing SPI accelerometer
- * GPIO_0003 Func 2 = SPI0_CS#,  func 1 = smbus00_sda
- * GPIO_0034 Func 2 = SPI0_CLK
- * GPIO_0004 Func 2 = SPI0_MOSI, func 1 = smbus00_scl
- * GPIO_0036 Func 2 = SPI0_MISO
- */
-
-
-
-/* PCH and CPU pins */
-
-/* Kabylake bringup using MECC board */
-/*
- *GPIO(ALL_SYS_PWRGD, PIN(057), GPIO_INPUT)
- */
-
-/*
- * This pulldown should be removed and SLP_S0 should be enabled as a power
- * signal interrupt in future hardware followers. The signal is pulled up
- * in the SoC when the primary rails are on and/or ramping.
- * In order to not get interrupt storms there should be external logic
- * which makes this a true binary signal into the EC.
- */
-/* MEC1701H GPIO_0222 Func1 SER_IRQ OK */
-GPIO(PCH_SLP_S0_L,          PIN(0222), GPIO_INPUT | GPIO_PULL_DOWN)
-/* MEC170H GPIO_0043 Func1 SB-TSI_CLK OK */
-GPIO(PCH_PWRBTN_L,          PIN(043),  GPIO_OUTPUT)
-/*
- *CONFLICT with KSI3. SCI becomes eSPI Virtual Wire, remove
- *GPIO(PCH_SCI_L,             PIN(026),  GPIO_ODR_HIGH)
- */
-/* When asserted, ME does not lock security descriptor */
-/* MEC1701H GPIO_0022/GPTP-IN0 OK */
-GPIO(PCH_SEC_DISABLE_L,     PIN(022),  GPIO_OUT_HIGH)
-/* MEC1701H GPIO_0016/GPTP-IN7/SHD_IO3 OK */
-GPIO(PCH_WAKE_L,            PIN(016),  GPIO_ODR_HIGH)
-/* MEC1701H GPIO_0110/PS2_CLK2 OK */
-GPIO(PCH_ACOK,              PIN(0110), GPIO_OUT_LOW)
-/* MEC1701H GPIO_0012/SMB07_DATA OK */
-GPIO(PCH_RSMRST_L,          PIN(012), GPIO_OUT_LOW)
-/*
- * !!! Don't use GPIO_0024 if testing on MEC51xx parts because
- * it is connected in the package to nRESET_IN# and will reset
- * the part when driven low.
- * !!!
- *GPIO(PCH_RTCRST,            PIN(024), GPIO_OUT_LOW)
- */
-GPIO(PCH_RTCRST,            PIN(052), GPIO_OUT_LOW)
-
-/*
- * MEC1322 Func1=nSMI, is code switching pin to Func1?
- * Conflicts with KSO04 on MEC1701H
- * eSPI replaces this signal with eSPI Virtual Wire.
- * GPIO(PCH_SMI_L,             PIN(044),  GPIO_ODR_HIGH)
- */
-
-/*
- * RCIN# line to PCH for 8042 emulation. Becomes VWire on eSPI
- * GPIO(PCH_RCIN_L,            PIN(0135), GPIO_ODR_HIGH)
- */
-
-/* MEC1701H GPIO_0111/PS2_DAT2 OK */
-GPIO(CPU_PROCHOT,           PIN(0111), GPIO_OUT_LOW)
-
-/* MEC1701H GPIO_0025/TIN0/nEM_INT/UART_CLK OK
- * Kabylake with MECC board change to GPIO_OUT_LOW
- * GPIO(SYS_RESET_L,           PIN(025), GPIO_ODR_HIGH)
- */
-GPIO(SYS_RESET_L,           PIN(025), GPIO_OUT_LOW)
-
-/* PMIC pins */
-/* GPIO_0033/RC_ID0 OK */
-GPIO(PMIC_SLP_SUS_L,        PIN(033), GPIO_OUT_LOW)
-
-/*
- * BATLOW_L and ROP_LDO_EN are stuffing options. Set as input to
- * dynamically handle the stuffing option based on board id.
- * As both signals have external pulls setting this pin as input
- * won't harm anything.
- */
-/* MEC1701H GPIO_0163/VCI_IN0# OK */
-GPIO(BATLOW_L_PMIC_LDO_EN,  PIN(0163),  GPIO_INPUT)
-
-
-/* I2C pins - these will be reconfigured for alternate function below */
-/* MEC1701H */
-/* Using these pins as function 2 (GP-SPI0)
- * GPIO(SMB00_SCL,             PIN(004),  GPIO_INPUT)
- * GPIO(SMB00_SDA,             PIN(003),  GPIO_INPUT)
- */
-GPIO(SMB02_SCL, PIN(0155), GPIO_INPUT)
-GPIO(SMB02_SDA, PIN(0154), GPIO_INPUT)
-GPIO(SMB03_SCL, PIN(010),  GPIO_INPUT)
-GPIO(SMB03_SDA, PIN(007),  GPIO_INPUT)
-GPIO(SMB04_SCL, PIN(0144), GPIO_INPUT)
-GPIO(SMB04_SDA, PIN(0143), GPIO_INPUT)
-GPIO(SMB05_SCL, PIN(0142), GPIO_INPUT)
-GPIO(SMB05_SDA,	PIN(0141), GPIO_INPUT)
-GPIO(SMB10_SCL, PIN(0131), GPIO_INPUT)
-GPIO(SMB10_SDA, PIN(0130), GPIO_INPUT)
-
-/* USB and USB-PD related pins */
-/* MEC1701H GPIO_0153/LED2 OK */
-GPIO(PD_RST_L,              PIN(0153), GPIO_ODR_HIGH)
-/* MEC1701H GPIO_0013/SMB07_CLK/TOUT2 OK */
-GPIO(USB2_OTG_ID,           PIN(013),  GPIO_ODR_LOW)
-/* MEC1701H GPIO_0042/PECI_DAT/SB-TSI_DAT */
-GPIO(USB1_ENABLE,           PIN(042),  GPIO_OUT_LOW)
-/* MEC1701H GPIO_0067/CLKRUN# OK */
-GPIO(USB2_ENABLE,           PIN(067),  GPIO_OUT_LOW)
-/* MEC1701H GPIO_0101/BGP01 OK */
-GPIO(USB_C0_DP_HPD,         PIN(0101), GPIO_OUT_LOW)
-/* MEC1701H GPIO_0102/BGP02 OK */
-GPIO(USB_C1_DP_HPD,         PIN(0102), GPIO_OUT_LOW)
-/* MEC1701H GPIO_0202/ADC02 OK */
-GPIO(USB_PD_WAKE,           PIN(0202), GPIO_OUT_HIGH)
-/* MEC1701H GPIO_0140/SMB06_CLK OK */
-GPIO(USB2_OTG_VBUSSENSE,    PIN(0140), GPIO_OUT_LOW)
-/* MEC1701H GPIO_0205/ADC05 OK */
-GPIO(USB_C0_5V_EN,          PIN(0205), GPIO_OUT_LOW)
-/* MEC1701H GPIO_0205/ADC06 OK */
-GPIO(USB_C1_5V_EN,          PIN(0206), GPIO_OUT_LOW)
-/* MEC1701H GPIO_0165/32KHZ_IN/CTOUT0/TRACECLK OK */
-GPIO(USB_C0_CHARGE_EN_L,    PIN(0165),  GPIO_OUT_LOW)
-/* MEC1701H GPIO_0152/GPTP-OUT/KSO16 OK */
-GPIO(USB_C1_CHARGE_EN_L,    PIN(0152),  GPIO_OUT_LOW)
-
-/* Fan PWM output and TACH input. PROCHOT input */
-/* MEC1701H GPIO_0050/FAN_TACH0 OK */
-GPIO(EC_FAN1_TTACH,         PIN(050), GPIO_INPUT | GPIO_PULL_UP)
-/* Fan PWM output - NC / testing only */
-/* MEC1701H GPIO_0053/PWM0 OK */
-GPIO(EC_FAN1_PWM,           PIN(053), GPIO_OUT_LOW)
-/* prochot input from devices */
-/* MEC1701H GPIO_0051/FAN_TACH1 OK */
-GPIO(PLATFORM_EC_PROCHOT,   PIN(051), GPIO_INPUT | GPIO_PULL_UP)
-
-
-/* Miscellaneous */
-/* KB BL PWM, only connected to TP */
-/* MEC1701H GPIO_0002/PWM5 OK */
-GPIO(PWM_KBLIGHT,           PIN(02),   GPIO_OUT_LOW)
-/* MEC1701H GPIO_0041/SYS_SHDN# OK */
-GPIO(ENTERING_RW,           PIN(041),  GPIO_OUT_LOW)
-/* MEC1701H GPIO_0115/PS2_DATA0A OK */
-GPIO(ENABLE_TOUCHPAD,       PIN(0115), GPIO_OUT_LOW)
-/* MEC1701H GPIO_0200/ADC00 OK */
-GPIO(BAT_PRESENT_L,         PIN(0200), GPIO_INPUT)
-/* MEC1701H GPIO_0164/VCI_OVRD_IN OK */
-GPIO(WLAN_OFF_L,            PIN(0164), GPIO_OUT_LOW)
-
-/* From lid sensor */
-/* MEC1701H GPIO_0000/VCI_IN3# OK */
-GPIO(ENABLE_BACKLIGHT,      PIN(00), GPIO_OUT_LOW)
-
-/* Interrupts from accelerometer / gyro -- not yet implemented */
-/*
- * GPIO(ACCEL1_INT,            PIN(0161), GPIO_INPUT)
- * GPIO(ACCEL2_INT,            PIN(0127), GPIO_INPUT)
- * MEC1701H must move. GPIO_0147 is JTAG_CLK
- * GPIO(ACCEL3_INT,            PIN(0147), GPIO_INPUT)
- * GPIO(ACCEL4_INT,            PIN(0126), GPIO_INPUT)
- */
-
-/* MEC1701H GPIO_0011/nSMI OK */
-/* Move to board ver GPIO(PP1800_DX_SENSOR_EN, PIN(011), GPIO_OUT_LOW) */
- /* MEC1701H GPIO_0207/ADC07 OK */
-/* Move to board ver GPIO(PP3300_WLAN_EN, PIN(0207), GPIO_OUT_LOW)*/
-/* MEC1701H GPIO_0114/PS2_CLK0A/nEC_SCI OK */
-/* Move to board version
- * GPIO(PP1800_DX_AUDIO_EN, PIN(0114), GPIO_OUT_LOW)
- */
-
-
-/* Board Version */
-/*
- * MEC1701H
- * GPIO_0130/SMB10_DATA
- * GPIO_0131/SMB10_CLK
- * GPIO_0132/SMB06_DATA
- */
-/*
- * GPIO(BOARD_VERSION1,        PIN(0130),  GPIO_INPUT)
- * GPIO(BOARD_VERSION2,        PIN(0131),  GPIO_INPUT)
- * GPIO(BOARD_VERSION3,        PIN(0132),  GPIO_INPUT)
- */
-GPIO(BOARD_VERSION1,        PIN(0114),  GPIO_INPUT)
-GPIO(BOARD_VERSION2,        PIN(0207),  GPIO_INPUT)
-GPIO(BOARD_VERSION3,        PIN(0011),  GPIO_INPUT)
-
-/*
- * MEC1701H GP-SPI0 chip select is GPIO_0003
- * It is used as GPIO output. GPSPI chip level
- * code drives chip select.
- */
-GPIO(SPI0_CS0,		PIN(03),  GPIO_ODR_HIGH)
-
-
-/*
- * TODO(crosbug.com/p/40848): These LEDs should be under control of the
- * mec1701 LED control unit. Remove these GPIO definitions once the LED
- * control unit is functional.
- */
-/* MEC1701H GPIO_0156/LED0 OK */
-GPIO(CHARGE_LED_1,	PIN(0156), GPIO_OUT_LOW)
-/* MEC1701H GPIO_0157/LED1 OK */
-GPIO(CHARGE_LED_2,	PIN(0157), GPIO_OUT_LOW)
-
-/*
- * MCHP TFDP
- */
-GPIO(TFDP_CLOCK,	PIN(0170), GPIO_INPUT)
-GPIO(TFDP_DATA,		PIN(0171), GPIO_INPUT)
-
-/* Alternate functions GPIO definitions */
-
-/* KB pins */
-#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP)
-#define GPIO_KB_OUTPUT (GPIO_ODR_HIGH)
-
-/* KB pins */
-/*
- * MEC1704H (144 pin package)
- * KSO00 = GPIO_0040 Func3 bank 1 bit 0
- * KSO01 = GPIO_0045 Func3 bank 1 bit 5
- * KSO02 = GPIO_0046 Func3 bank 1 bit 6
- * KSO03 = GPIO_0047 Func3 bank 1 bit 7
- * KSO04 = GPIO_0107 Func3 bank 2 bit 7
- * KSO05 = GPIO_0112 Func3 bank 2 bit 10
- * KSO06 = GPIO_0113 Func3 bank 2 bit 11
- * KSO07 = GPIO_0120 Func3 bank 2 bit 16
- * KSO08 = GPIO_0121 Func3 bank 2 bit 17
- * KSO09 = GPIO_0122 Func3 bank 2 bit 18
- * KSO10 = GPIO_0123 Func3 bank 2 bit 19
- * KSO11 = GPIO_0124 Func3 bank 2 bit 20
- * KSO12 = GPIO_0125 Func3 bank 2 bit 21
- * For 8x16 test keyboard add KSO13 - KSO15
- * KSO13 = GPIO_0126 Func3 bank 2 bit 22
- * KSO14 = GPIO_0132 Func3 bank 2 bit 26
- * KSO15 = GPIO_0151 Func3 bank 3 bit 9
- *
- * KSI0 = GPIO_0017 Func3 bank 0 bit 15
- * KSI1 = GPIO_0020 Func3 bank 0 bit 16
- * KSI2 = GPIO_0021 Func3 bank 0 bit 17
- * KSI3 = GPIO_0026 Func3 bank 0 bit 22
- * KSI4 = GPIO_0027 Func3 bank 0 bit 23
- * KSI5 = GPIO_0030 Func3 bank 0 bit 24
- * KSI6 = GPIO_0031 Func3 bank 0 bit 25
- * KSI7 = GPIO_0032 Func3 bank 0 bit 26
- */
-/* KSI 0-7, Bank 0, Func3, bits 15-17, 22-26 */
-ALTERNATE(PIN_MASK(0, 0x07C38000), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
-
-/* KSO 0-3 Bank 1, Func3, bits 0, 5-7 */
-ALTERNATE(PIN_MASK(1, 0xE1), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)
-/* KSO 4-12, Bank 2, Func3, bits 7, 10-11, 16-21 */
-ALTERNATE(PIN_MASK(2, 0x003F0C80), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)
-
-/* Add KSO13-15 for 8x16 test matrix */
-/* KSO 13-14, Bank 2, Func3, bits 22, 26 */
-/*ALTERNATE(PIN_MASK(2, 0x04400000), 3, MODULE_KEYBOARD_SCAN, \
- * GPIO_KB_OUTPUT)
- */
-/* KSO 15, Bank 3, Func3, bit 9 */
-/*ALTERNATE(PIN_MASK(3, 0x00000200), 3, MODULE_KEYBOARD_SCAN, \
- * GPIO_KB_OUTPUT)
- */
-
-/* eSPI pins */
-/* ESPI_RESET# - GPIO_0061 Function 2, Bank 1 bit[17] */
-ALTERNATE(PIN_MASK(1, 0x20000), 2, MODULE_LPC, 0)
-/* ESPI_ALERT# - GPIO_0063 Function 2, Bank 1 bit[19] */
-ALTERNATE(PIN_MASK(1, 0x80000), 2, MODULE_LPC, 0)
-/* ESPI_CS# - GPIO_0066 Function 2, Bank 1 bit[22] */
-ALTERNATE(PIN_MASK(1, 0x400000), 2, MODULE_LPC, 0)
-/* ESPI_CLK - GPIO_0065 Function 2, Bank 1 bit[21] */
-ALTERNATE(PIN_MASK(1, 0x200000), 2, MODULE_LPC, 0)
-/* ESPI_IO{0,1,2,3} - GPIO_0070-GPIO_0073 Function 2, Bank 1 bits[24:27] */
-ALTERNATE(PIN_MASK(1, 0xf000000), 2, MODULE_LPC, 0)
-
-/* LPC LRESET# GPIO_0064/LRESET#
- * Function 1, Bank 1 bit[20] */
-ALTERNATE(PIN_MASK(1, 0x100000), 1, MODULE_LPC, GPIO_PULL_UP)
-
-/*
- * MEC1701H GP-SPI0 Master
- * SPI0_CS# = GPIO_0003 Func 0(GPIO) Bank 0, bit 3
- * SPI0_CLK = GPIO_0034 Func 2	Bank 0, bit 28
- * SPI0_MISO = GPIO_0036 Func 2	Bank 0, bit 30
- * SPI0_MOSI = GPIO_0004 Func 2	Bank 0, bit 4
- */
-ALTERNATE(PIN_MASK(0,  0x00000008), 0, MODULE_SPI_CONTROLLER, GPIO_ODR_HIGH)
-ALTERNATE(PIN_MASK(0,  0x50000010), 2, MODULE_SPI_CONTROLLER, 0)
-
-/* I2C pins */
-/* Using SMB00 as function 2 GP-SPI0
- * SMB00_DAT - GPIO_0003 Func1, SMB00_CLK - GPIO_0004 Func1
- * SMB03_DAT - GPIO_0007 Func1, SMB03_CLK - GPIO_0010 Func1
- * Bank 0 bits[3:4,7:8]
-*/
-/* ALTERNATE(PIN_MASK(0,  0x0198), 1, MODULE_I2C, GPIO_ODR_HIGH) */
-ALTERNATE(PIN_MASK(0,  0x0180), 1, MODULE_I2C, GPIO_ODR_HIGH)
-
-/*
- * SMB05_DAT - GPIO_0141 Func1, SMB05_CLK - GPIO_0142 Func1
- * SMB04_DAT - GPIO_0143 Func1, SMB04_CLK - GPIO_0144 Func1
- * SMB02_DAT - GPIO_0154 Func1, SMB02_CLK - GPIO_0155 Func1
- * Bank 3 bits[1:4,12:13]
-*/
-ALTERNATE(PIN_MASK(3,  0x301e), 1, MODULE_I2C, GPIO_ODR_HIGH)
-
-/* ADC pins */
-/* ADC01 - GPIO_0201 / PPVAR_BOOSTIN_SENSE. Func1 Bank 4 bit[1]
- * ADC03 - GPIO_0203 / IADP_ACMON_BMON. Func1 Bank 4 bit[3]
- * ADC04 - GPIO_0204 / PMON_PSYS. Func1 Bank 4 bit[4]
- * ADC07 - GPIO_0207 / Thermistor call it ADC_CASE
- */
-ALTERNATE(PIN_MASK(4,  0x009a), 1, MODULE_ADC, GPIO_ANALOG)
-
-/* LED0 - GPIO_0156 Func1 Bank 3 bit[14]
- * LED1 - GPIO_0157 Func1 Bank 3 bit[15]
- */
-ALTERNATE(PIN_MASK(3, 0xc000), 1, MODULE_POWER_LED, 0)
-
-/*
- * nRESET_OUT functionality is PWROK signal from MEC1701H
- * nRESET_OUT - GPIO121 Bank 2 bit[17]
- * MEC1701H nRESET_OUT is GPIO_0106/PWROK func1
- * Bank 2 bit[6]
- */
-/*
- * Not using nRESET_OUT on Kabylake RVP3 plus MEC170x EVB
- * ALTERNATE(PIN_MASK(2, 0x40), 1, MODULE_PMU, 0)
- */
-
-/*
- * MCHP TFDP alternate function configuration
- * GPIO 0170 = clock, 0171 = data both function 1
- * Port = 3 bits[24:25]
- */
-ALTERNATE(PIN_MASK(3, 0x03000000), 1, MODULE_TFDP, 0)