ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 906 deletions

diff --git a/board/metaknight/board.c b/board/metaknight/board.c
deleted file mode 100644
index 8f54536d7f..0000000000
--- a/board/metaknight/board.c
+++ /dev/null
@@ -1,906 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* metaknight board-specific configuration */
-
-#include "adc.h"
-#include "button.h"
-#include "cbi_fw_config.h"
-#include "cbi_ssfc.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "chipset.h"
-#include "common.h"
-#include "compile_time_macros.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accel_kionix.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/accelgyro_icm_common.h"
-#include "driver/accelgyro_icm426xx.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "temp_sensor.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/retimer/nb7v904m.h"
-#include "driver/tcpm/raa489000.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/usb_mux/pi3usb3x532.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "motion_sense.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "stdbool.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#define INT_RECHECK_US 5000
-
-#define ADC_VOL_UP_MASK     BIT(0)
-#define ADC_VOL_DOWN_MASK   BIT(1)
-
-static uint8_t new_adc_key_state;
-
-/* USB-A Configuration */
-const int usb_port_enable[USB_PORT_COUNT] = {
-	GPIO_EN_USB_A0_VBUS,
-	GPIO_EN_USB_A1_VBUS,
-};
-
-/* C0 interrupt line shared by BC 1.2 and charger */
-static void check_c0_line(void);
-DECLARE_DEFERRED(check_c0_line);
-
-static void notify_c0_chips(void)
-{
-	/*
-	 * The interrupt line is shared between the TCPC and BC 1.2 detection
-	 * chip.  Therefore we'll need to check both ICs.
-	 */
-	schedule_deferred_pd_interrupt(0);
-	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-static void check_c0_line(void)
-{
-	/*
-	 * If line is still being held low, see if there's more to process from
-	 * one of the chips
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		notify_c0_chips();
-		hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-	}
-}
-
-static void usb_c0_interrupt(enum gpio_signal s)
-{
-	/* Cancel any previous calls to check the interrupt line */
-	hook_call_deferred(&check_c0_line_data, -1);
-
-	/* Notify all chips using this line that an interrupt came in */
-	notify_c0_chips();
-
-	/* Check the line again in 5ms */
-	hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-
-}
-
-static void sub_hdmi_hpd_interrupt(enum gpio_signal s)
-{
-	int hdmi_hpd_odl = gpio_get_level(GPIO_HDMI_HPD_SUB_ODL);
-
-	gpio_set_level(GPIO_EC_AP_USB_C1_HDMI_HPD, !hdmi_hpd_odl);
-
-	cprints(CC_SYSTEM, "HDMI plug-%s", !hdmi_hpd_odl ? "in" : "out");
-}
-
-/**
- * Handle debounced pen input changing state.
- */
-static void pen_input_deferred(void)
-{
-	int pen_charge_enable = !gpio_get_level(GPIO_PEN_DET_ODL) &&
-			!chipset_in_state(CHIPSET_STATE_ANY_OFF);
-
-	if (pen_charge_enable)
-		gpio_set_level(GPIO_EN_PP3300_PEN, 1);
-	else
-		gpio_set_level(GPIO_EN_PP3300_PEN, 0);
-
-	CPRINTS("Pen charge %sable", pen_charge_enable ? "en" : "dis");
-}
-DECLARE_DEFERRED(pen_input_deferred);
-
-void pen_input_interrupt(enum gpio_signal signal)
-{
-	/* pen input debounce time */
-	hook_call_deferred(&pen_input_deferred_data, (100 * MSEC));
-}
-
-static void pen_charge_check(void)
-{
-	hook_call_deferred(&pen_input_deferred_data, (100 * MSEC));
-}
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP, pen_charge_check, HOOK_PRIO_LAST);
-DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, pen_charge_check, HOOK_PRIO_LAST);
-
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_1] = {
-		.name = "TEMP_SENSOR1",
-		.input_ch = NPCX_ADC_CH0,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-	[ADC_TEMP_SENSOR_2] = {
-		.name = "TEMP_SENSOR2",
-		.input_ch = NPCX_ADC_CH1,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-	[ADC_SUB_ANALOG] = {
-		.name = "SUB_ANALOG",
-		.input_ch = NPCX_ADC_CH2,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-	[ADC_VSNS_PP3300_A] = {
-		.name = "PP3300_A_PGOOD",
-		.input_ch = NPCX_ADC_CH9,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* Thermistors */
-const struct temp_sensor_t temp_sensors[] = {
-
-	[TEMP_SENSOR_MEMORY] = {
-		.name = "Memory",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v3_51k1_47k_4050b,
-		.idx  = ADC_TEMP_SENSOR_1
-	},
-	[TEMP_SENSOR_CPU] = {
-		.name = "CPU",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v3_51k1_47k_4050b,
-		.idx  = ADC_TEMP_SENSOR_2
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-const static struct ec_thermal_config thermal_memory = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(85),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-};
-
-const static struct ec_thermal_config thermal_cpu = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-};
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_thermal(void)
-{
-	thermal_params[TEMP_SENSOR_MEMORY] = thermal_memory;
-	thermal_params[TEMP_SENSOR_CPU]    = thermal_cpu;
-}
-
-void board_hibernate(void)
-{
-	/*
-	 * Both charger ICs need to be put into their "low power mode" before
-	 * entering the Z-state.
-	 */
-	if (board_get_charger_chip_count() > 1)
-		raa489000_hibernate(1, true);
-	raa489000_hibernate(0, true);
-}
-
-void board_reset_pd_mcu(void)
-{
-	/*
-	 * TODO(b:147316511): Here we could issue a digital reset to the IC,
-	 * unsure if we actually want to do that or not yet.
-	 */
-}
-
-#ifdef BOARD_WADDLEDOO
-static void reconfigure_5v_gpio(void)
-{
-	/*
-	 * b/147257497: On early waddledoo boards, GPIO_EN_PP5000 was swapped
-	 * with GPIO_VOLUP_BTN_ODL. Therefore, we'll actually need to set that
-	 * GPIO instead for those boards.  Note that this breaks the volume up
-	 * button functionality.
-	 */
-	if (system_get_board_version() < 0) {
-		CPRINTS("old board - remapping 5V en");
-		gpio_set_flags(GPIO_VOLUP_BTN_ODL, GPIO_OUT_LOW);
-	}
-}
-DECLARE_HOOK(HOOK_INIT, reconfigure_5v_gpio, HOOK_PRIO_INIT_I2C+1);
-#endif /* BOARD_WADDLEDOO */
-
-static void set_5v_gpio(int level)
-{
-	int version;
-	enum gpio_signal gpio = GPIO_EN_PP5000;
-
-	/*
-	 * b/147257497: On early waddledoo boards, GPIO_EN_PP5000 was swapped
-	 * with GPIO_VOLUP_BTN_ODL. Therefore, we'll actually need to set that
-	 * GPIO instead for those boards.  Note that this breaks the volume up
-	 * button functionality.
-	 */
-	if (IS_ENABLED(BOARD_WADDLEDOO)) {
-		version = system_get_board_version();
-
-		/*
-		 * If the CBI EEPROM wasn't formatted, assume it's a very early
-		 * board.
-		 */
-		gpio = version < 0 ? GPIO_VOLUP_BTN_ODL : GPIO_EN_PP5000;
-	}
-
-	gpio_set_level(gpio, level);
-}
-
-__override void board_power_5v_enable(int enable)
-{
-	/*
-	 * Port 0 simply has a GPIO to turn on the 5V regulator, however, 5V is
-	 * generated locally on the sub board and we need to set the comparator
-	 * polarity on the sub board charger IC, or send enable signal to HDMI
-	 * DB.
-	 */
-	set_5v_gpio(!!enable);
-
-	if (get_cbi_fw_config_db() == DB_1A_HDMI ||
-		get_cbi_fw_config_db() == DB_LTE_HDMI) {
-		gpio_set_level(GPIO_SUB_C1_INT_EN_RAILS_ODL, !enable);
-	}
-}
-
-__override uint8_t board_get_usb_pd_port_count(void)
-{
-	return CONFIG_USB_PD_PORT_MAX_COUNT;
-}
-
-__override uint8_t board_get_charger_chip_count(void)
-{
-	return CHARGER_NUM;
-}
-
-int board_is_sourcing_vbus(int port)
-{
-	int regval;
-
-	tcpc_read(port, TCPC_REG_POWER_STATUS, &regval);
-	return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS);
-
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_real_port = (port >= 0 &&
-			    port < board_get_usb_pd_port_count());
-	int i;
-	int old_port;
-
-	if (!is_real_port && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	old_port = charge_manager_get_active_charge_port();
-
-	CPRINTS("New chg p%d", port);
-
-	/* Disable all ports. */
-	if (port == CHARGE_PORT_NONE) {
-		for (i = 0; i < board_get_usb_pd_port_count(); i++) {
-			tcpc_write(i, TCPC_REG_COMMAND,
-				   TCPC_REG_COMMAND_SNK_CTRL_LOW);
-			raa489000_enable_asgate(i, false);
-		}
-
-		return EC_SUCCESS;
-	}
-
-	/* Check if port is sourcing VBUS. */
-	if (board_is_sourcing_vbus(port)) {
-		CPRINTS("Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-	/*
-	 * Turn off the other ports' sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < board_get_usb_pd_port_count(); i++) {
-		if (i == port)
-			continue;
-
-		if (tcpc_write(i, TCPC_REG_COMMAND,
-			       TCPC_REG_COMMAND_SNK_CTRL_LOW))
-			CPRINTS("p%d: sink path disable failed.", i);
-		raa489000_enable_asgate(i, false);
-	}
-
-	/*
-	 * Stop the charger IC from switching while changing ports.  Otherwise,
-	 * we can overcurrent the adapter we're switching to. (crbug.com/926056)
-	 */
-	if (old_port != CHARGE_PORT_NONE)
-		charger_discharge_on_ac(1);
-
-	/* Enable requested charge port. */
-	if (raa489000_enable_asgate(port, true) ||
-	    tcpc_write(port, TCPC_REG_COMMAND,
-		       TCPC_REG_COMMAND_SNK_CTRL_HIGH)) {
-		CPRINTS("p%d: sink path enable failed.", port);
-		charger_discharge_on_ac(0);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	/* Allow the charger IC to begin/continue switching. */
-	charger_discharge_on_ac(0);
-
-	return EC_SUCCESS;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma,
-			    int max_ma, int charge_mv)
-{
-	int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
-	/*
-	 * b/147463641: The charger IC seems to overdraw ~4%, therefore we
-	 * reduce our target accordingly.
-	 */
-	icl = icl * 96 / 100;
-	charge_set_input_current_limit(icl, charge_mv);
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
-	if (port < 0 || port > board_get_usb_pd_port_count())
-		return;
-
-	raa489000_set_output_current(port, rp);
-}
-
-/* Sensors */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* Matrices to rotate accelerometers into the standard reference. */
-static const mat33_fp_t lid_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-static const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-static const mat33_fp_t base_lsm6dsm_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-static const mat33_fp_t base_icm_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-static struct accelgyro_saved_data_t g_bma253_data;
-static struct bmi_drv_data_t g_bmi160_data;
-static struct kionix_accel_data g_kx022_data;
-static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;
-static struct icm_drv_data_t g_icm426xx_data;
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMA255,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &bma2x2_accel_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_bma253_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.default_range = 2,
-		.min_frequency = BMA255_ACCEL_MIN_FREQ,
-		.max_frequency = BMA255_ACCEL_MAX_FREQ,
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.default_range = 4,
-		.min_frequency = BMI_ACCEL_MIN_FREQ,
-		.max_frequency = BMI_ACCEL_MAX_FREQ,
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.default_range = 1000, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_GYRO_MIN_FREQ,
-		.max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-};
-
-const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-struct motion_sensor_t kx022_lid_accel = {
-	.name = "Lid Accel",
-	.active_mask = SENSOR_ACTIVE_S0_S3,
-	.chip = MOTIONSENSE_CHIP_KX022,
-	.type = MOTIONSENSE_TYPE_ACCEL,
-	.location = MOTIONSENSE_LOC_LID,
-	.drv = &kionix_accel_drv,
-	.mutex = &g_lid_mutex,
-	.drv_data = &g_kx022_data,
-	.port = I2C_PORT_ACCEL,
-	.i2c_spi_addr_flags = KX022_ADDR0_FLAGS,
-	.rot_standard_ref = &lid_standard_ref,
-	.min_frequency = KX022_ACCEL_MIN_FREQ,
-	.max_frequency = KX022_ACCEL_MAX_FREQ,
-	.default_range = 2, /* g, to support tablet mode */
-	.config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	},
-};
-
-struct motion_sensor_t lsm6dsm_base_accel = {
-	.name = "Base Accel",
-	.active_mask = SENSOR_ACTIVE_S0_S3,
-	.chip = MOTIONSENSE_CHIP_LSM6DS3,
-	.type = MOTIONSENSE_TYPE_ACCEL,
-	.location = MOTIONSENSE_LOC_BASE,
-	.drv = &lsm6dsm_drv,
-	.mutex = &g_base_mutex,
-	.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-			MOTIONSENSE_TYPE_ACCEL),
-	.int_signal = GPIO_BASE_SIXAXIS_INT_L,
-	.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-	.port = I2C_PORT_SENSOR,
-	.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-	.rot_standard_ref = &base_lsm6dsm_ref,
-	.default_range = 4,  /* g */
-	.min_frequency = LSM6DSM_ODR_MIN_VAL,
-	.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	.config = {
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 13000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		},
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		},
-	},
-};
-
-struct motion_sensor_t lsm6dsm_base_gyro = {
-	.name = "Base Gyro",
-	.active_mask = SENSOR_ACTIVE_S0_S3,
-	.chip = MOTIONSENSE_CHIP_LSM6DS3,
-	.type = MOTIONSENSE_TYPE_GYRO,
-	.location = MOTIONSENSE_LOC_BASE,
-	.drv = &lsm6dsm_drv,
-	.mutex = &g_base_mutex,
-	.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-			MOTIONSENSE_TYPE_GYRO),
-	.int_signal = GPIO_BASE_SIXAXIS_INT_L,
-	.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-	.port = I2C_PORT_SENSOR,
-	.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-	.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-	.rot_standard_ref = &base_lsm6dsm_ref,
-	.min_frequency = LSM6DSM_ODR_MIN_VAL,
-	.max_frequency = LSM6DSM_ODR_MAX_VAL,
-};
-
-
-struct motion_sensor_t icm426xx_base_accel = {
-	.name = "Base Accel",
-	.active_mask = SENSOR_ACTIVE_S0_S3,
-	.chip = MOTIONSENSE_CHIP_ICM426XX,
-	.type = MOTIONSENSE_TYPE_ACCEL,
-	.location = MOTIONSENSE_LOC_BASE,
-	.drv = &icm426xx_drv,
-	.mutex = &g_base_mutex,
-	.drv_data = &g_icm426xx_data,
-	.port = I2C_PORT_ACCEL,
-	.i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS,
-	.default_range = 4, /* g, enough for laptop */
-	.rot_standard_ref = &base_icm_ref,
-	.min_frequency = ICM426XX_ACCEL_MIN_FREQ,
-	.max_frequency = ICM426XX_ACCEL_MAX_FREQ,
-	.config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 13000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		},
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		},
-	},
-};
-
-struct motion_sensor_t icm426xx_base_gyro = {
-	.name = "Base Gyro",
-	.active_mask = SENSOR_ACTIVE_S0_S3,
-	.chip = MOTIONSENSE_CHIP_ICM426XX,
-	.type = MOTIONSENSE_TYPE_GYRO,
-	.location = MOTIONSENSE_LOC_BASE,
-	.drv = &icm426xx_drv,
-	.mutex = &g_base_mutex,
-	.drv_data = &g_icm426xx_data,
-	.port = I2C_PORT_ACCEL,
-	.i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS,
-	.default_range = 1000, /* dps */
-	.rot_standard_ref = &base_icm_ref,
-	.min_frequency = ICM426XX_GYRO_MIN_FREQ,
-	.max_frequency = ICM426XX_GYRO_MAX_FREQ,
-};
-
-static int base_gyro_config;
-
-void board_init(void)
-{
-	int on;
-
-	gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
-	check_c0_line();
-
-	if (get_cbi_fw_config_db() == DB_1A_HDMI ||
-		get_cbi_fw_config_db() == DB_LTE_HDMI) {
-		/* Disable i2c on HDMI pins */
-		gpio_config_pin(MODULE_I2C, GPIO_HDMI_HPD_SUB_ODL, 0);
-		gpio_config_pin(MODULE_I2C, GPIO_GPIO92_NC, 0);
-
-		gpio_set_flags(GPIO_SUB_C1_INT_EN_RAILS_ODL,   GPIO_ODR_HIGH);
-
-		/* Select HDMI option */
-		gpio_set_level(GPIO_HDMI_SEL_L, 0);
-
-		/* Enable interrupt for passing through HPD */
-		gpio_enable_interrupt(GPIO_HDMI_HPD_SUB_ODL);
-	} else {
-		/* Set SDA as an input */
-		gpio_set_flags(GPIO_HDMI_HPD_SUB_ODL,
-			       GPIO_INPUT);
-	}
-	/* Enable gpio interrupt for base accelgyro sensor */
-	gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-
-	/* Enable gpio interrupt for pen detect */
-	gpio_enable_interrupt(GPIO_PEN_DET_ODL);
-
-	/* Turn on 5V if the system is on, otherwise turn it off. */
-	on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND |
-			      CHIPSET_STATE_SOFT_OFF);
-	board_power_5v_enable(on);
-
-	/* Initialize g-sensor */
-	base_gyro_config = get_cbi_ssfc_base_sensor();
-
-	if (base_gyro_config == SSFC_SENSOR_LSM6DSM) {
-		motion_sensors[BASE_ACCEL] = lsm6dsm_base_accel;
-		motion_sensors[BASE_GYRO]  = lsm6dsm_base_gyro;
-		cprints(CC_SYSTEM, "SSFC: BASE GYRO is LSM6DSM");
-	} else if (get_cbi_ssfc_base_sensor() == SSFC_SENSOR_ICM426XX) {
-		motion_sensors[BASE_ACCEL] = icm426xx_base_accel;
-		motion_sensors[BASE_GYRO]  = icm426xx_base_gyro;
-		cprints(CC_SYSTEM, "SSFC: BASE GYRO is ICM426XX");
-	} else
-		cprints(CC_SYSTEM, "SSFC: BASE GYRO is BMI160");
-
-	if (get_cbi_ssfc_lid_sensor() == SSFC_SENSOR_KX022) {
-		motion_sensors[LID_ACCEL] = kx022_lid_accel;
-		cprints(CC_SYSTEM, "SSFC: LID ACCEL is KX022");
-	} else
-		cprints(CC_SYSTEM, "SSFC: LID ACCEL is BMA253");
-
-	/* Initial thermal */
-	setup_thermal();
-
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-int pd_snk_is_vbus_provided(int port)
-{
-	return pd_check_vbus_level(port, VBUS_PRESENT);
-}
-
-const struct charger_config_t chg_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
-		.drv = &isl923x_drv,
-	},
-};
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-		.flags = PI3USB9201_ALWAYS_POWERED,
-	},
-};
-
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0,
-			.addr_flags = RAA489000_TCPC0_I2C_FLAGS,
-		},
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-		.drv = &raa489000_tcpm_drv,
-	},
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB3X532_I2C_ADDR0,
-		.driver = &pi3usb3x532_usb_mux_driver,
-	},
-};
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-	int regval;
-
-	/*
-	 * The interrupt line is shared between the TCPC and BC1.2 detector IC.
-	 * Therefore, go out and actually read the alert registers to report the
-	 * alert status.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		if (!tcpc_read16(0, TCPC_REG_ALERT, &regval)) {
-			/* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */
-			if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0))
-				regval &= ~((1 << 14) | (1 << 13) | (1 << 12));
-
-			if (regval)
-				status |= PD_STATUS_TCPC_ALERT_0;
-		}
-	}
-
-	if (board_get_usb_pd_port_count() > 1 &&
-				!gpio_get_level(GPIO_SUB_C1_INT_EN_RAILS_ODL)) {
-		if (!tcpc_read16(1, TCPC_REG_ALERT, &regval)) {
-			/* TCPCI spec Rev 1.0 says to ignore bits 14:12. */
-			if (!(tcpc_config[1].flags & TCPC_FLAGS_TCPCI_REV2_0))
-				regval &= ~((1 << 14) | (1 << 13) | (1 << 12));
-
-			if (regval)
-				status |= PD_STATUS_TCPC_ALERT_1;
-		}
-	}
-
-	return status;
-}
-
-int adc_to_physical_value(enum gpio_signal gpio)
-{
-	if (gpio == GPIO_VOLUME_UP_L)
-		return !!(new_adc_key_state & ADC_VOL_UP_MASK);
-	else if (gpio == GPIO_VOLUME_DOWN_L)
-		return !!(new_adc_key_state & ADC_VOL_DOWN_MASK);
-
-	CPRINTS("Not a volume up or down key");
-	return 0;
-}
-
-int button_is_adc_detected(enum gpio_signal gpio)
-{
-	return (gpio == GPIO_VOLUME_DOWN_L) || (gpio == GPIO_VOLUME_UP_L);
-}
-
-static void adc_vol_key_press_check(void)
-{
-	int volt = adc_read_channel(ADC_SUB_ANALOG);
-	static uint8_t old_adc_key_state;
-	uint8_t adc_key_state_change;
-
-	if (volt > 2400 && volt < 2540) {
-		/* volume-up is pressed */
-		new_adc_key_state = ADC_VOL_UP_MASK;
-	} else if (volt > 2600 && volt < 2740) {
-		/* volume-down is pressed */
-		new_adc_key_state = ADC_VOL_DOWN_MASK;
-	} else if (volt < 2300) {
-		/* both volumn-up and volume-down are pressed */
-		new_adc_key_state = ADC_VOL_UP_MASK | ADC_VOL_DOWN_MASK;
-	} else if (volt > 2780) {
-		/* both volumn-up and volume-down are released */
-		new_adc_key_state = 0;
-	}
-	if (new_adc_key_state != old_adc_key_state) {
-		adc_key_state_change = old_adc_key_state ^ new_adc_key_state;
-		if (adc_key_state_change && ADC_VOL_UP_MASK)
-			button_interrupt(GPIO_VOLUME_UP_L);
-		if (adc_key_state_change && ADC_VOL_DOWN_MASK)
-			button_interrupt(GPIO_VOLUME_DOWN_L);
-
-		old_adc_key_state = new_adc_key_state;
-	}
-}
-DECLARE_HOOK(HOOK_TICK, adc_vol_key_press_check, HOOK_PRIO_DEFAULT);
-
-/* This callback disables keyboard when convertibles are fully open */
-__override void lid_angle_peripheral_enable(int enable)
-{
-	int chipset_in_s0 = chipset_in_state(CHIPSET_STATE_ON);
-
-	/*
-	 * If the lid is in tablet position via other sensors,
-	 * ignore the lid angle, which might be faulty then
-	 * disable keyboard.
-	 */
-	if (tablet_get_mode())
-		enable = 0;
-
-	if (enable) {
-		keyboard_scan_enable(1, KB_SCAN_DISABLE_LID_ANGLE);
-	} else {
-		/*
-		 * Ensure that the chipset is off before disabling the keyboard.
-		 * When the chipset is on, the EC keeps the keyboard enabled and
-		 * the AP decides whether to ignore input devices or not.
-		 */
-		if (!chipset_in_s0)
-			keyboard_scan_enable(0, KB_SCAN_DISABLE_LID_ANGLE);
-	}
-}
-
-#ifndef TEST_BUILD
-void motion_interrupt(enum gpio_signal signal)
-{
-	switch (base_gyro_config) {
-	case SSFC_SENSOR_LSM6DSM:
-		lsm6dsm_interrupt(signal);
-		break;
-	case SSFC_SENSOR_ICM426XX:
-		icm426xx_interrupt(signal);
-		break;
-	case SSFC_SENSOR_BMI160:
-	default:
-		bmi160_interrupt(signal);
-		break;
-	}
-}
-
-const struct i2c_port_t i2c_ports[] = {
-	{
-		"eeprom", I2C_PORT_EEPROM, 400, GPIO_EC_I2C_EEPROM_SCL,
-		GPIO_EC_I2C_EEPROM_SDA
-	},
-
-	{
-		"battery", I2C_PORT_BATTERY, 100, GPIO_EC_I2C_BATTERY_SCL,
-		GPIO_EC_I2C_BATTERY_SDA
-	},
-
-	{
-		"sensor", I2C_PORT_SENSOR, 400, GPIO_EC_I2C_SENSOR_SCL,
-		GPIO_EC_I2C_SENSOR_SDA
-	},
-
-	{
-		"usbc0", I2C_PORT_USB_C0, 1000, GPIO_EC_I2C_USB_C0_SCL,
-		GPIO_EC_I2C_USB_C0_SDA
-	},
-#if CONFIG_USB_PD_PORT_MAX_COUNT > 1
-	{
-		"sub_usbc1", I2C_PORT_SUB_USB_C1, 1000,
-		GPIO_EC_I2C_SUB_USB_C1_SCL, GPIO_EC_I2C_SUB_USB_C1_SDA
-	},
-#endif
-};
-
-#endif