ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 562 deletions

diff --git a/board/mushu/board.c b/board/mushu/board.c
deleted file mode 100644
index 353875e9f5..0000000000
--- a/board/mushu/board.c
+++ /dev/null
@@ -1,562 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Mushu board-specific configuration */
-
-#include "adc.h"
-#include "button.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/als_tcs3400.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/temp_sensor/amd_r19me4070.h"
-#include "driver/temp_sensor/f75303.h"
-#include "ec_commands.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "spi.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "thermal.h"
-#include "temp_sensor/thermistor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_pd.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* GPIO to enable/disable the USB Type-A port. */
-const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = {
-	GPIO_EN_USB_A_5V,
-};
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_INT_ODL:
-		sn5s330_interrupt(0);
-		break;
-
-	case GPIO_USB_C1_PPC_INT_ODL:
-		sn5s330_interrupt(1);
-		break;
-
-	default:
-		break;
-	}
-}
-
-static void tcpc_alert_event(enum gpio_signal signal)
-{
-	int port = -1;
-
-	switch (signal) {
-	case GPIO_USB_C0_TCPC_INT_ODL:
-		port = 0;
-		break;
-	case GPIO_USB_C1_TCPC_INT_ODL:
-		port = 1;
-		break;
-	default:
-		return;
-	}
-
-	schedule_deferred_pd_interrupt(port);
-}
-
-static void hdmi_hpd_interrupt(enum gpio_signal signal)
-{
-	baseboard_mst_enable_control(MST_HDMI, gpio_get_level(signal));
-}
-
-static void bc12_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-		break;
-
-	case GPIO_USB_C1_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-		break;
-
-	default:
-		break;
-	}
-}
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-/******************************************************************************/
-/* SPI devices */
-const struct spi_device_t spi_devices[] = {
-};
-const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
-
-/******************************************************************************/
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT]   = { .channel = 3, .flags = 0, .freq = 10000 },
-	[PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN,
-			.freq = 25000},
-	[PWM_CH_FAN2] = {.channel = 6, .flags = PWM_CONFIG_OPEN_DRAIN,
-			.freq = 25000},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/******************************************************************************/
-/* USB-C TPCP Configuration */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC0,
-			.addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS,
-		},
-		.drv = &anx7447_tcpm_drv,
-		.flags = TCPC_FLAGS_RESET_ACTIVE_HIGH,
-	},
-	[USB_PD_PORT_TCPC_1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC1,
-			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-		},
-		.drv = &ps8xxx_tcpm_drv,
-	},
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.usb_port = USB_PD_PORT_TCPC_0,
-		.driver = &anx7447_usb_mux_driver,
-		.hpd_update = &anx7447_tcpc_update_hpd_status,
-	},
-	[USB_PD_PORT_TCPC_1] = {
-		.usb_port = USB_PD_PORT_TCPC_1,
-		.driver = &tcpci_tcpm_usb_mux_driver,
-		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	}
-};
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.i2c_port = I2C_PORT_PPC0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-
-	[USB_PD_PORT_TCPC_1] = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-
-/******************************************************************************/
-/* Sensors */
-/* Base Sensor mutex */
-static struct mutex g_base_mutex;
-static struct mutex g_lid_mutex;
-
-/* Base accel private data */
-static struct bmi_drv_data_t g_bmi160_data;
-
-/* BMA255 private data */
-static struct accelgyro_saved_data_t g_bma255_data;
-
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
-	.als_cal.scale = 1,
-	.als_cal.uscale = 0,
-	.als_cal.offset = 0,
-	.als_cal.channel_scale = {
-		.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc */
-		.cover_scale = ALS_CHANNEL_SCALE(1.0),     /* CT */
-	},
-};
-
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
-	.calibration.rgb_cal[X] = {
-		.offset = 0,
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Y] = {
-		.offset = 0,
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Z] = {
-		.offset = 0,
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.irt = INT_TO_FP(1),
-	.saturation.again = TCS_DEFAULT_AGAIN,
-	.saturation.atime = TCS_DEFAULT_ATIME,
-};
-
-/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-/*
- * TODO(b/124337208): P0 boards don't have this sensor mounted so the rotation
- * matrix can't be tested properly. This needs to be revisited after EVT to make
- * sure the rotation matrix for the lid sensor is correct.
- */
-static const mat33_fp_t lid_standard_ref = {
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMA255,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &bma2x2_accel_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_bma255_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.min_frequency = BMA255_ACCEL_MIN_FREQ,
-		.max_frequency = BMA255_ACCEL_MAX_FREQ,
-		.default_range = 2, /* g, to support tablet mode */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_ACCEL_MIN_FREQ,
-		.max_frequency = BMI_ACCEL_MAX_FREQ,
-	  .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs.*/
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.default_range = 1000, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_GYRO_MIN_FREQ,
-		.max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-
-	[CLEAR_ALS] = {
-		.name = "Clear Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &tcs3400_drv,
-		.drv_data = &g_tcs3400_data,
-		.port = I2C_PORT_ALS,
-		.i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-		.min_frequency = TCS3400_LIGHT_MIN_FREQ,
-		.max_frequency = TCS3400_LIGHT_MAX_FREQ,
-		.config = {
-			/* Run ALS sensor in S0 */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 1000,
-			},
-		},
-	},
-
-	[RGB_ALS] = {
-		/*
-		 * RGB channels read by CLEAR_ALS and so the i2c port and
-		 * address do not need to be defined for RGB_ALS.
-		 */
-		.name = "RGB Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT_RGB,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &tcs3400_rgb_drv,
-		.drv_data = &g_tcs3400_rgb_data,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-
-const struct fan_conf fan_conf_0 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = MFT_CH_0,	/* Use MFT id to control fan */
-	.pgood_gpio = -1,
-	.enable_gpio = GPIO_EN_PP5000_FAN,
-};
-
-const struct fan_conf fan_conf_1 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = MFT_CH_1,	/* Use MFT id to control fan */
-	.pgood_gpio = -1,
-	.enable_gpio = GPIO_EN_PP5000_FAN,
-};
-/* Default */
-const struct fan_rpm fan_rpm_0 = {
-	.rpm_min = 2000,
-	.rpm_start = 2000,
-	.rpm_max = 4100,
-};
-
-const struct fan_rpm fan_rpm_1 = {
-	.rpm_min = 2000,
-	.rpm_start = 2000,
-	.rpm_max = 4100,
-};
-const struct fan_t fans[FAN_CH_COUNT] = {
-	[FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, },
-	[FAN_CH_1] = { .conf = &fan_conf_1, .rpm = &fan_rpm_1, },
-};
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
-	[MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN},
-	[MFT_CH_1] = {NPCX_MFT_MODULE_2, TCKC_LFCLK, PWM_CH_FAN2},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_1] = {
-		"TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_TEMP_SENSOR_2] = {
-		"TEMP_5V", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_CHARGER] = {
-		.name = "CHARGER",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v3_30k9_47k_4050b,
-		.idx = ADC_TEMP_SENSOR_1
-	},
-	[TEMP_5V] = {
-		.name = "5V",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v3_30k9_47k_4050b,
-		.idx = ADC_TEMP_SENSOR_2
-	},
-	[TEMP_GPU] = {
-		.name = "GPU",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_R19ME4070,
-		.idx = R19ME4070_LOCAL
-	},
-	[TEMP_F75303_LOCAL] = {
-		.name = "F75303_Local",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = f75303_get_val,
-		.idx = F75303_IDX_LOCAL
-	},
-	[TEMP_F75303_GPU] = {
-		.name = "F75303_GPU",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = f75303_get_val,
-		.idx = F75303_IDX_REMOTE1
-	},
-	[TEMP_F75303_GPU_POWER] = {
-		.name = "F75303_GPU_Power",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = f75303_get_val,
-		.idx = F75303_IDX_REMOTE2
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-
-/* Hatch Temperature sensors */
-/*
- * TODO(b/124316213): These setting need to be reviewed and set appropriately
- * for Hatch. They matter when the EC is controlling the fan as opposed to DPTF
- * control.
- */
-const static struct ec_thermal_config thermal_a = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-	.temp_fan_off = C_TO_K(0),
-	.temp_fan_max = C_TO_K(70),
-};
-
-const static struct ec_thermal_config thermal_b = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-	.temp_fan_off = C_TO_K(0),
-	.temp_fan_max = C_TO_K(70),
-};
-
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_fans(void)
-{
-	thermal_params[TEMP_CHARGER] = thermal_a;
-	thermal_params[TEMP_5V] = thermal_a;
-	thermal_params[TEMP_GPU] = thermal_b;
-}
-
-/* Sets the gpio flags correct taking into account warm resets */
-static void reset_gpio_flags(enum gpio_signal signal, int flags)
-{
-	/*
-	 * If the system was already on, we cannot set the value otherwise we
-	 * may change the value from the previous image which could cause a
-	 * brownout.
-	 */
-	if (system_is_reboot_warm() || system_jumped_late())
-		flags &= ~(GPIO_LOW | GPIO_HIGH);
-
-	gpio_set_flags(signal, flags);
-}
-
-/* Runtime GPIO defaults */
-enum gpio_signal gpio_en_pp5000_a = GPIO_EN_PP5000_A_V1;
-
-static void board_gpio_set_pp5000(void)
-{
-	uint32_t board_id = 0;
-
-	/* Errors will count as board_id 0 */
-	cbi_get_board_version(&board_id);
-
-	if (board_id == 0) {
-		reset_gpio_flags(GPIO_EN_PP5000_A_V0, GPIO_OUT_LOW);
-		/* Change runtime default for V0 */
-		gpio_en_pp5000_a = GPIO_EN_PP5000_A_V0;
-	} else if (board_id >= 1) {
-		reset_gpio_flags(GPIO_EN_PP5000_A_V1, GPIO_OUT_LOW);
-	}
-
-}
-
-static void board_init(void)
-{
-	/* Initialize Fans */
-	setup_fans();
-	/* Enable gpio interrupt for base accelgyro sensor */
-	gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-	/* Enable interrupt for the TCS3400 color light sensor */
-	gpio_enable_interrupt(GPIO_TCS3400_INT_ODL);
-	/* Enable HDMI HPD interrupt. */
-	gpio_enable_interrupt(GPIO_HDMI_CONN_HPD);
-	/* Select correct gpio signal for PP5000_A control */
-	board_gpio_set_pp5000();
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* Check that port number is valid. */
-	if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
-		return;
-
-	/* Note that the level is inverted because the pin is active low. */
-	gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented);
-}
-
-bool board_is_convertible(void)
-{
-	const uint8_t sku = get_board_sku();
-
-	return (sku == 255);
-}