diff options
author | Jack Rosenthal <jrosenth@chromium.org> | 2021-11-04 12:11:58 -0600 |
---|---|---|
committer | Commit Bot <commit-bot@chromium.org> | 2021-11-05 04:22:34 +0000 |
commit | 252457d4b21f46889eebad61d4c0a65331919cec (patch) | |
tree | 01856c4d31d710b20e85a74c8d7b5836e35c3b98 /board/oak/gpio.inc | |
parent | 08f5a1e6fc2c9467230444ac9b582dcf4d9f0068 (diff) | |
download | chrome-ec-stabilize-14388.62.B-ish.tar.gz |
ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
Diffstat (limited to 'board/oak/gpio.inc')
-rw-r--r-- | board/oak/gpio.inc | 214 |
1 files changed, 0 insertions, 214 deletions
diff --git a/board/oak/gpio.inc b/board/oak/gpio.inc deleted file mode 100644 index 3789f3ec35..0000000000 --- a/board/oak/gpio.inc +++ /dev/null @@ -1,214 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2015 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(AC_PRESENT, PIN(C, 6), GPIO_INT_BOTH, extpower_interrupt) -GPIO_INT(POWER_BUTTON_L, PIN(B, 5), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt) -GPIO_INT(LID_OPEN, PIN(C, 13), GPIO_INT_BOTH, lid_interrupt) /* LID switch detection */ -#if BOARD_REV <= OAK_REV3 -GPIO_INT(SUSPEND_L, PIN(C, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt) /* AP suspend/resume state */ -#else -GPIO_INT(SUSPEND_L, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) /* AP suspend/resume state */ -#endif -GPIO_INT(PD_MCU_INT, PIN(E, 0), GPIO_INT_FALLING, pd_mcu_interrupt) /* Signal from PD MCU, external pull-up */ -GPIO_INT(SPI1_NSS, PIN(A, 4), GPIO_INT_BOTH | GPIO_PULL_UP, spi_event) /* SPI Chip Select */ - -/* Keyboard inputs */ -#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP | GPIO_INT_BOTH) -#define GPIO_KB_OUTPUT GPIO_ODR_HIGH - -GPIO_INT(KB_IN00, PIN(C, 8), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN01, PIN(C, 9), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN02, PIN(C, 10), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN03, PIN(C, 11), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN04, PIN(C, 12), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN05, PIN(C, 14), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN06, PIN(C, 15), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN07, PIN(D, 2), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) - -/* Board specific interrupt and input */ -#if BOARD_REV <= OAK_REV1 -GPIO_INT(SOC_POWER_GOOD, PIN(A, 3), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt) -GPIO(EC_INT_L, PIN(B, 9), GPIO_OUT_HIGH) -#elif BOARD_REV == OAK_REV2 -GPIO_INT(SOC_POWER_GOOD, PIN(A, 3), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt) -GPIO(EC_INT_L, PIN(B, 9), GPIO_OUT_HIGH) -GPIO(USB_VBUS_WAKE_L, PIN(E, 1), GPIO_INPUT) -#elif BOARD_REV == OAK_REV3 -GPIO_INT(SOC_POWER_GOOD, PIN(A, 3), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt) -GPIO(EC_INT_L, PIN(B, 9), GPIO_OUT_HIGH) -GPIO(USB_C0_VBUS_WAKE_L, PIN(E, 1), GPIO_INPUT) -GPIO(USB_C1_VBUS_WAKE_L, PIN(F, 2), GPIO_INPUT) -#elif BOARD_REV >= OAK_REV4 -GPIO_INT(SOC_POWER_GOOD, PIN(A, 3), GPIO_INT_BOTH , power_signal_interrupt) -GPIO_INT(USB_BC12_INT, PIN(E, 1), GPIO_INT_FALLING, usb_evt) -GPIO(USB_C0_VBUS_WAKE_L, PIN(D, 12), GPIO_INPUT) -GPIO(USB_C1_VBUS_WAKE_L, PIN(F, 2), GPIO_INPUT) -GPIO(EC_INT_L, PIN(B, 9), GPIO_ODR_HIGH) -#endif - -/* Inputs without interrupt handlers */ -GPIO(5V_POWER_GOOD, PIN(A, 1), GPIO_INPUT) -GPIO(EC_WAKE, PIN(A, 0), GPIO_INPUT|GPIO_PULL_DOWN) -GPIO(WP_L, PIN(B, 4), GPIO_INPUT) /* Write protect input */ -GPIO(BAT_PRESENT_L, PIN(E, 3), GPIO_INPUT|GPIO_PULL_UP) - -/* Board version */ -GPIO(BOARD_VERSION1, PIN(E, 10), GPIO_INPUT) /* Board ID 0 */ -GPIO(BOARD_VERSION2, PIN(E, 9), GPIO_INPUT) /* Board ID 1 */ -GPIO(BOARD_VERSION3, PIN(E, 12), GPIO_INPUT) /* Board ID 2 */ -GPIO(BOARD_VERSION4, PIN(E, 11), GPIO_INPUT) /* Board ID 3 */ - -/* Outputs */ -#if BOARD_REV < OAK_REV5 -GPIO(BAT_LED0, PIN(B, 11), GPIO_OUT_LOW) /* LED_GREEN */ -GPIO(BAT_LED1, PIN(A, 11), GPIO_OUT_LOW) /* LED_ORANGE or LED_RED(>rev3)*/ -#else -GPIO(BAT_LED0, PIN(A, 11), GPIO_OUT_LOW) /* LED_GREEN */ -GPIO(BAT_LED1, PIN(B, 11), GPIO_OUT_LOW) /* LED_ORANGE or LED_RED(>rev3)*/ -#endif - -#if (BOARD_REV == OAK_REV3) || (BOARD_REV == OAK_REV4) -GPIO(PWR_LED0, PIN(F, 10), GPIO_OUT_LOW) /* LED_GREEN */ -GPIO(PWR_LED1, PIN(F, 9), GPIO_OUT_LOW) /* LED_ORANGE */ -#else -UNIMPLEMENTED(PWR_LED0) -UNIMPLEMENTED(PWR_LED1) -#endif -GPIO(EC_BL_OVERRIDE, PIN(F, 1), GPIO_OUT_LOW) -GPIO(ENTERING_RW, PIN(F, 0), GPIO_OUT_LOW) - - -#if BOARD_REV == OAK_REV1 -GPIO(AP_RESET_L, PIN(C, 3), GPIO_INPUT|GPIO_PULL_UP) /* AP reset signal from servo board */ -GPIO(USB_C_BC12_SEL, PIN(A, 14), GPIO_OUT_LOW) -GPIO(KB_OUT00, PIN(B, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT01, PIN(B, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT02, PIN(B, 12), GPIO_OUT_LOW) /* KSO2 is inverted */ -GPIO(KB_OUT03, PIN(B, 2), GPIO_KB_OUTPUT) -GPIO(KB_OUT04, PIN(A, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT05, PIN(D, 4), GPIO_KB_OUTPUT) -GPIO(KB_OUT06, PIN(D, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT07, PIN(D, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT08, PIN(C, 2), GPIO_KB_OUTPUT) -GPIO(KB_OUT09, PIN(B, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT10, PIN(C, 5), GPIO_KB_OUTPUT) -GPIO(KB_OUT11, PIN(C, 4), GPIO_KB_OUTPUT) -GPIO(KB_OUT12, PIN(A, 13), GPIO_KB_OUTPUT) -UNIMPLEMENTED(DP_SWITCH_CTL) - -#elif BOARD_REV == OAK_REV2 -GPIO(AP_RESET_L, PIN(C, 3), GPIO_INPUT|GPIO_PULL_UP) /* AP reset signal from servo board */ -GPIO(USB_C_BC12_SEL, PIN(D, 7), GPIO_OUT_LOW) -GPIO(KB_OUT00, PIN(B, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT01, PIN(B, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT02, PIN(B, 12), GPIO_OUT_LOW) /* KSO2 is inverted */ -GPIO(KB_OUT03, PIN(B, 2), GPIO_KB_OUTPUT) -GPIO(KB_OUT04, PIN(A, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT05, PIN(D, 4), GPIO_KB_OUTPUT) -GPIO(KB_OUT06, PIN(D, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT07, PIN(D, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT08, PIN(C, 2), GPIO_KB_OUTPUT) -GPIO(KB_OUT09, PIN(B, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT10, PIN(C, 5), GPIO_KB_OUTPUT) -GPIO(KB_OUT11, PIN(C, 4), GPIO_KB_OUTPUT) -GPIO(KB_OUT12, PIN(D, 5), GPIO_KB_OUTPUT) -GPIO(DP_MUX_EN_L, PIN(E, 6), GPIO_OUT_LOW) -GPIO(DP_SWITCH_CTL, PIN(E, 5), GPIO_OUT_LOW) - -#elif BOARD_REV <= OAK_REV4 /* BOARD_REV 3 or 4 */ -GPIO(AP_RESET_L, PIN(C, 3), GPIO_ODR_HIGH) /* Connect to the PMU_SYSRSTB */ -GPIO(USB_C_BC12_SEL, PIN(D, 7), GPIO_OUT_LOW) -GPIO(KB_OUT00, PIN(B, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT01, PIN(B, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT02, PIN(B, 12), GPIO_OUT_LOW) /* KSO2 is inverted */ -GPIO(KB_OUT03, PIN(D, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT04, PIN(A, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT05, PIN(D, 4), GPIO_KB_OUTPUT) -GPIO(KB_OUT06, PIN(B, 2), GPIO_KB_OUTPUT) -GPIO(KB_OUT07, PIN(D, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT08, PIN(D, 5), GPIO_KB_OUTPUT) -GPIO(KB_OUT09, PIN(B, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT10, PIN(C, 5), GPIO_KB_OUTPUT) -GPIO(KB_OUT11, PIN(C, 4), GPIO_KB_OUTPUT) -GPIO(KB_OUT12, PIN(C, 2), GPIO_KB_OUTPUT) -UNIMPLEMENTED(DP_SWITCH_CTL) - -#else /* >= OAK_REV5 */ -GPIO(AP_RESET_L, PIN(C, 3), GPIO_ODR_HIGH) /* Connect to the PMU_SYSRSTB */ -GPIO(USB_C_BC12_SEL, PIN(D, 7), GPIO_OUT_LOW) -GPIO(KB_OUT00, PIN(B, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT01, PIN(B, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT02, PIN(B, 12), GPIO_OUT_LOW) /* KSO2 is inverted */ -GPIO(KB_OUT03, PIN(B, 2), GPIO_KB_OUTPUT) -GPIO(KB_OUT04, PIN(A, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT05, PIN(D, 14), GPIO_KB_OUTPUT) -GPIO(KB_OUT06, PIN(D, 13), GPIO_KB_OUTPUT) -GPIO(KB_OUT07, PIN(D, 15), GPIO_KB_OUTPUT) -GPIO(KB_OUT08, PIN(C, 2), GPIO_KB_OUTPUT) -GPIO(KB_OUT09, PIN(B, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT10, PIN(C, 5), GPIO_KB_OUTPUT) -GPIO(KB_OUT11, PIN(C, 4), GPIO_KB_OUTPUT) -GPIO(KB_OUT12, PIN(D, 5), GPIO_KB_OUTPUT) -GPIO(C1_DP_HPD, PIN(E,15), GPIO_OUT_LOW) /* inform PS8740 to exit from idle mode. */ -GPIO(DP_SWITCH_CTL, PIN(E, 5), GPIO_OUT_LOW) -GPIO(EN_OTG_USB_A_PWR, PIN(E, 4), GPIO_OUT_HIGH) -GPIO(OTG_USB_A_ILIM_SEL,PIN(E, 2), GPIO_OUT_HIGH) -GPIO(EC_IDDIG, PIN(E,13), GPIO_OUT_LOW) -GPIO(DP_MUX_EN_L, PIN(E, 6), GPIO_OUT_LOW) -GPIO(PARADE_MUX_EN, PIN(E, 7), GPIO_OUT_HIGH) -#endif /* BOARD_REV */ - -GPIO(SYSTEM_POWER_H, PIN(B, 10), GPIO_OUT_LOW) -GPIO(PMIC_PWRON_H, PIN(A, 12), GPIO_OUT_LOW) -GPIO(PMIC_WARM_RESET_H, PIN(B, 3), GPIO_OUT_LOW) -#if BOARD_REV <= OAK_REV4 -GPIO(LEVEL_SHIFT_EN_L, PIN(D, 3), GPIO_OUT_LOW) /* LID/AC level shift */ -GPIO(USB_C0_DEVMODE_L, PIN(E, 4), GPIO_OUT_HIGH) /* set HSD2 (host mode) path as default */ -GPIO(USB_C1_DEVMODE, PIN(E, 2), GPIO_OUT_LOW) /* set HSD1 (host mode) path as default */ -#else /* >= OAK_REV5 */ -GPIO(LEVEL_SHIFT_EN_L, PIN(F, 10), GPIO_OUT_LOW) /* LID/AC level shift */ -/* SPI MASTER. For SPI sensor */ -GPIO(SPI2_NSS, PIN(D, 0), GPIO_OUT_LOW) - -#endif -GPIO(USB_PD_RST_L, PIN(A, 15), GPIO_OUT_HIGH) /* PD reset */ -GPIO(USB_C0_5V_EN, PIN(D, 8), GPIO_OUT_LOW) /* USBC port 0 5V */ -GPIO(USB_C0_CHARGE_L, PIN(D, 9), GPIO_OUT_LOW) /* USBC port 0 charge */ -GPIO(USB_C1_5V_EN, PIN(D, 10), GPIO_OUT_LOW) /* USBC port 1 5V */ -GPIO(USB_C1_CHARGE_L, PIN(D, 11), GPIO_OUT_LOW) /* USBC port 1 charge */ -GPIO(USB_PD_VBUS_WAKE, PIN(B, 15), GPIO_OUT_LOW) /* PD MCU wake */ -GPIO(USB_DP_HPD, PIN(F, 3), GPIO_OUT_LOW) - -#if (BOARD_REV < OAK_REV5) -GPIO(TYPEC0_MUX_EN_L, PIN(E, 13), GPIO_OUT_LOW) -GPIO(TYPEC1_MUX_EN_L, PIN(E, 14), GPIO_OUT_LOW) -#endif - -/* Analog pins */ -GPIO(VDC_BOOSTIN_SENSE, PIN(C, 1), GPIO_ANALOG) /* ADC_IN11 */ -GPIO(PSYS_MONITOR, PIN(A, 2), GPIO_ANALOG) /* ADC_IN2 */ -GPIO(AMON_BMON, PIN(C, 0), GPIO_ANALOG) /* ADC_IN10 */ - -/* - * I2C pins should be configured as inputs until I2C module is - * initialized. This will avoid driving the lines unintentionally. - */ -GPIO(I2C0_SCL, PIN(B, 6), GPIO_INPUT) /* EC I2C */ -GPIO(I2C0_SDA, PIN(B, 7), GPIO_INPUT) -GPIO(I2C1_SCL, PIN(B, 13), GPIO_INPUT) /* PD I2C */ -GPIO(I2C1_SDA, PIN(B, 14), GPIO_INPUT) - -ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_UART, 0) /* USART1: PA9/PA10 */ -ALTERNATE(PIN_MASK(B, 0x00c0), 1, MODULE_I2C, 0) /* I2C MASTER:PB6/7 */ -ALTERNATE(PIN_MASK(B, 0x6000), 5, MODULE_I2C, 0) /* I2C MASTER:PB13/14 */ -ALTERNATE(PIN_MASK(A, 0x00f0), 0, MODULE_SPI, 0) /* SPI SLAVE:PA4/5/6/7 */ -#if BOARD_REV >= OAK_REV5 -ALTERNATE(PIN_MASK(D, 0x001A), 1, MODULE_SPI_CONTROLLER, 0) /* SPI MASTER:PD1/3/4 */ -#endif |