board/osiris/board.h: Format with clang-format

BUG=b:236386294
BRANCH=none
TEST=none

Tricium: disable
Change-Id: I55fd69eb42cc15ceb05bf183a80ba3954f22d314
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3728795
Reviewed-by: Jeremy Bettis <jbettis@chromium.org>

1 files changed, 56 insertions, 68 deletions

diff --git a/board/osiris/board.h b/board/osiris/board.h
index aee05b025e..d52f52878e 100644
--- a/board/osiris/board.h
+++ b/board/osiris/board.h
@@ -25,7 +25,7 @@
 #define CONFIG_LED_ONOFF_STATES
 
 /* USB Type A Features */
-#define USB_PORT_COUNT			1
+#define USB_PORT_COUNT 1
 #define CONFIG_USB_PORT_POWER_DUMB
 
 #undef CONFIG_USB_PD_TCPM_NCT38XX
@@ -48,17 +48,17 @@
 #define CONFIG_USBC_PPC_SYV682X
 
 /* TODO: b/177608416 - measure and check these values on osiris */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY	30000 /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY	30000 /* us */
-#define PD_VCONN_SWAP_DELAY		5000 /* us */
+#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */
+#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */
+#define PD_VCONN_SWAP_DELAY 5000 /* us */
 
 /*
  * Passive USB-C cables only support up to 60W.
  */
-#define PD_OPERATING_POWER_MW	15000
-#define PD_MAX_POWER_MW		60000
-#define PD_MAX_CURRENT_MA	3000
-#define PD_MAX_VOLTAGE_MV	20000
+#define PD_OPERATING_POWER_MW 15000
+#define PD_MAX_POWER_MW 60000
+#define PD_MAX_CURRENT_MA 3000
+#define PD_MAX_VOLTAGE_MV 20000
 
 /*
  * Macros for GPIO signals used in common code that don't match the
@@ -66,56 +66,55 @@
  * then redefined here to so it's more clear which signal is being used for
  * which purpose.
  */
-#define GPIO_AC_PRESENT			GPIO_ACOK_OD
-#define GPIO_CPU_PROCHOT		GPIO_EC_PROCHOT_ODL
-#define GPIO_EC_INT_L			GPIO_EC_PCH_INT_ODL
-#define GPIO_ENABLE_BACKLIGHT		GPIO_EC_EN_EDP_BL
-#define GPIO_ENTERING_RW		GPIO_EC_ENTERING_RW
-#define GPIO_KBD_KSO2			GPIO_EC_KSO_02_INV
-#define GPIO_PACKET_MODE_EN		GPIO_EC_GSC_PACKET_MODE
-#define GPIO_PCH_PWRBTN_L		GPIO_EC_PCH_PWR_BTN_ODL
-#define GPIO_PCH_RSMRST_L		GPIO_EC_PCH_RSMRST_L
-#define GPIO_PCH_RTCRST			GPIO_EC_PCH_RTCRST
-#define GPIO_PCH_SLP_S0_L		GPIO_SYS_SLP_S0IX_L
-#define GPIO_PCH_SLP_S3_L		GPIO_SLP_S3_L
-#define GPIO_TEMP_SENSOR_POWER		GPIO_SEQ_EC_DSW_PWROK
+#define GPIO_AC_PRESENT GPIO_ACOK_OD
+#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL
+#define GPIO_EC_INT_L GPIO_EC_PCH_INT_ODL
+#define GPIO_ENABLE_BACKLIGHT GPIO_EC_EN_EDP_BL
+#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW
+#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV
+#define GPIO_PACKET_MODE_EN GPIO_EC_GSC_PACKET_MODE
+#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_ODL
+#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_L
+#define GPIO_PCH_RTCRST GPIO_EC_PCH_RTCRST
+#define GPIO_PCH_SLP_S0_L GPIO_SYS_SLP_S0IX_L
+#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L
+#define GPIO_TEMP_SENSOR_POWER GPIO_SEQ_EC_DSW_PWROK
 
 /*
  * GPIO_EC_PCH_INT_ODL is used for MKBP events as well as a PCH wakeup
  * signal.
  */
-#define GPIO_PCH_WAKE_L			GPIO_EC_PCH_INT_ODL
-#define GPIO_PG_EC_ALL_SYS_PWRGD	GPIO_SEQ_EC_ALL_SYS_PG
-#define GPIO_PG_EC_DSW_PWROK		GPIO_SEQ_EC_DSW_PWROK
-#define GPIO_PG_EC_RSMRST_ODL		GPIO_SEQ_EC_RSMRST_ODL
-#define GPIO_POWER_BUTTON_L		GPIO_GSC_EC_PWR_BTN_ODL
-#define GPIO_SYS_RESET_L		GPIO_SYS_RST_ODL
-#define GPIO_WP_L			GPIO_EC_WP_ODL
-
+#define GPIO_PCH_WAKE_L GPIO_EC_PCH_INT_ODL
+#define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_SEQ_EC_ALL_SYS_PG
+#define GPIO_PG_EC_DSW_PWROK GPIO_SEQ_EC_DSW_PWROK
+#define GPIO_PG_EC_RSMRST_ODL GPIO_SEQ_EC_RSMRST_ODL
+#define GPIO_POWER_BUTTON_L GPIO_GSC_EC_PWR_BTN_ODL
+#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL
+#define GPIO_WP_L GPIO_EC_WP_ODL
 
 /* I2C Bus Configuration */
 
-#define I2C_PORT_RGBKB		NPCX_I2C_PORT0_0
+#define I2C_PORT_RGBKB NPCX_I2C_PORT0_0
 
-#define I2C_PORT_USB_C0_C2_TCPC	NPCX_I2C_PORT1_0
-#define I2C_PORT_USB_C1_TCPC	NPCX_I2C_PORT4_1
+#define I2C_PORT_USB_C0_C2_TCPC NPCX_I2C_PORT1_0
+#define I2C_PORT_USB_C1_TCPC NPCX_I2C_PORT4_1
 
-#define I2C_PORT_USB_C0_C2_PPC	NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_C1_PPC	NPCX_I2C_PORT6_1
+#define I2C_PORT_USB_C0_C2_PPC NPCX_I2C_PORT2_0
+#define I2C_PORT_USB_C1_PPC NPCX_I2C_PORT6_1
 
-#define I2C_PORT_USB_C0_C2_BC12	NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_C1_BC12	NPCX_I2C_PORT6_1
+#define I2C_PORT_USB_C0_C2_BC12 NPCX_I2C_PORT2_0
+#define I2C_PORT_USB_C1_BC12 NPCX_I2C_PORT6_1
 
-#define I2C_PORT_USB_C1_MUX	NPCX_I2C_PORT6_1
+#define I2C_PORT_USB_C1_MUX NPCX_I2C_PORT6_1
 
-#define I2C_PORT_BATTERY	NPCX_I2C_PORT5_0
-#define I2C_PORT_CHARGER	NPCX_I2C_PORT7_0
-#define I2C_PORT_EEPROM		NPCX_I2C_PORT7_0
-#define I2C_PORT_MP2964		NPCX_I2C_PORT7_0
+#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0
+#define I2C_PORT_CHARGER NPCX_I2C_PORT7_0
+#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0
+#define I2C_PORT_MP2964 NPCX_I2C_PORT7_0
 
-#define I2C_ADDR_EEPROM_FLAGS	0x50
+#define I2C_ADDR_EEPROM_FLAGS 0x50
 
-#define I2C_ADDR_MP2964_FLAGS	0x20
+#define I2C_ADDR_MP2964_FLAGS 0x20
 
 /* Thermal features */
 #define CONFIG_THERMISTOR
@@ -123,32 +122,32 @@
 #define CONFIG_TEMP_SENSOR_POWER
 #define CONFIG_STEINHART_HART_3V3_30K9_47K_4050B
 
-#define CONFIG_FANS			FAN_CH_COUNT
+#define CONFIG_FANS FAN_CH_COUNT
 
 /* Charger defines */
 #define CONFIG_CHARGER_ISL9241
 #define CONFIG_CHARGE_RAMP_SW
-#define CONFIG_CHARGER_SENSE_RESISTOR		10
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC	10
+#define CONFIG_CHARGER_SENSE_RESISTOR 10
+#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
 
 #undef CONFIG_VOLUME_BUTTONS
 
 /* RGB Keyboard */
 #define CONFIG_KEYBOARD_BACKLIGHT
-#define GPIO_RGBKBD_SDB_L	GPIO_EC_KB_BL_EN_L
+#define GPIO_RGBKBD_SDB_L GPIO_EC_KB_BL_EN_L
 #ifdef SECTION_IS_RW
 #define CONFIG_RGB_KEYBOARD
-#define CONFIG_LED_DRIVER_IS31FL3733B     /* is31fl3733b on I2C */
+#define CONFIG_LED_DRIVER_IS31FL3733B /* is31fl3733b on I2C */
 #endif
-#define RGB_GRID0_COL		12
-#define RGB_GRID0_ROW		1
-#define I2C_PORT_KBMCU		I2C_PORT_RGBKB
+#define RGB_GRID0_COL 12
+#define RGB_GRID0_ROW 1
+#define I2C_PORT_KBMCU I2C_PORT_RGBKB
 
 #define CONFIG_KEYBOARD_FACTORY_TEST
 
 #ifndef __ASSEMBLER__
 
-#include "gpio_signal.h"	/* needed by registers.h */
+#include "gpio_signal.h" /* needed by registers.h */
 #include "registers.h"
 #include "usbc_config.h"
 
@@ -166,28 +165,17 @@ enum temp_sensor_id {
 	TEMP_SENSOR_COUNT
 };
 
-enum battery_type {
-	BATTERY_COSMX_AP22ABN,
-	BATTERY_TYPE_COUNT
-};
+enum battery_type { BATTERY_COSMX_AP22ABN, BATTERY_TYPE_COUNT };
 
 enum pwm_channel {
-	PWM_CH_FAN = 0,			/* PWM5 */
-	PWM_CH_FAN2,			/* PWM3 */
+	PWM_CH_FAN = 0, /* PWM5 */
+	PWM_CH_FAN2, /* PWM3 */
 	PWM_CH_COUNT
 };
 
-enum fan_channel {
-	FAN_CH_0 = 0,
-	FAN_CH_1,
-	FAN_CH_COUNT
-};
+enum fan_channel { FAN_CH_0 = 0, FAN_CH_1, FAN_CH_COUNT };
 
-enum mft_channel {
-	MFT_CH_0 = 0,
-	MFT_CH_1,
-	MFT_CH_COUNT
-};
+enum mft_channel { MFT_CH_0 = 0, MFT_CH_1, MFT_CH_COUNT };
 
 #ifdef CONFIG_KEYBOARD_FACTORY_TEST
 extern const int keyboard_factory_scan_pins[][2];