ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

8 files changed, 0 insertions, 1153 deletions

diff --git a/board/pazquel/battery.c b/board/pazquel/battery.c
deleted file mode 100644
index 88a38255d0..0000000000
--- a/board/pazquel/battery.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-
-const struct board_batt_params board_battery_info[] = {
-	/* GanFeng SG20 Battery Information */
-	[BATTERY_GANFENG] = {
-		.fuel_gauge = {
-			.manuf_name = "Ganfeng",
-			.device_name = "SG20",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.reg_addr = 0x43,
-				.reg_mask = 0x0003,
-				.disconnect_val = 0x0000,
-			}
-		},
-		.batt_info = {
-			.voltage_max        = 8700, /* mV */
-			.voltage_normal     = 7600, /* mV */
-			.voltage_min        = 6000, /* mV */
-			.precharge_current  = 256,  /* mA */
-			.start_charging_min_c = 0,
-			.start_charging_max_c = 50,
-			.charging_min_c     = 0,
-			.charging_max_c     = 60,
-			.discharging_min_c  = -20,
-			.discharging_max_c  = 60,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_GANFENG;
diff --git a/board/pazquel/board.c b/board/pazquel/board.c
deleted file mode 100644
index 8d7e679190..0000000000
--- a/board/pazquel/board.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Trogdor board-specific configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "extpower.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "pi3usb9201.h"
-#include "power.h"
-#include "power/qcom.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "system.h"
-#include "shi_chip.h"
-#include "switch.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "usbc_ocp.h"
-#include "usbc_ppc.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* Forward declaration */
-static void tcpc_alert_event(enum gpio_signal signal);
-static void usb0_evt(enum gpio_signal signal);
-static void usb1_evt(enum gpio_signal signal);
-static void usba_oc_interrupt(enum gpio_signal signal);
-static void ppc_interrupt(enum gpio_signal signal);
-static void board_connect_c0_sbu(enum gpio_signal s);
-
-#include "gpio_list.h"
-
-/* GPIO Interrupt Handlers */
-static void tcpc_alert_event(enum gpio_signal signal)
-{
-	int port = -1;
-
-	switch (signal) {
-	case GPIO_USB_C0_PD_INT_ODL:
-		port = 0;
-		break;
-	case GPIO_USB_C1_PD_INT_ODL:
-		port = 1;
-		break;
-	default:
-		return;
-	}
-
-	schedule_deferred_pd_interrupt(port);
-}
-
-static void usb0_evt(enum gpio_signal signal)
-{
-	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-static void usb1_evt(enum gpio_signal signal)
-{
-	task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-}
-
-static void usba_oc_deferred(void)
-{
-	/* Use next number after all USB-C ports to indicate the USB-A port */
-	board_overcurrent_event(CONFIG_USB_PD_PORT_MAX_COUNT,
-				!gpio_get_level(GPIO_USB_A0_OC_ODL));
-}
-DECLARE_DEFERRED(usba_oc_deferred);
-
-static void usba_oc_interrupt(enum gpio_signal signal)
-{
-	hook_call_deferred(&usba_oc_deferred_data, 0);
-}
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_SWCTL_INT_ODL:
-		sn5s330_interrupt(0);
-		break;
-	case GPIO_USB_C1_SWCTL_INT_ODL:
-		sn5s330_interrupt(1);
-		break;
-	default:
-		break;
-	}
-}
-
-static void board_connect_c0_sbu_deferred(void)
-{
-	/*
-	 * If CCD_MODE_ODL asserts, it means there's a debug accessory connected
-	 * and we should enable the SBU FETs.
-	 */
-	ppc_set_sbu(0, 1);
-}
-DECLARE_DEFERRED(board_connect_c0_sbu_deferred);
-
-static void board_connect_c0_sbu(enum gpio_signal s)
-{
-	hook_call_deferred(&board_connect_c0_sbu_deferred_data, 0);
-}
-
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
-	/* Use 80 us, because KSO_02 passes through the H1. */
-	.output_settle_us = 80,
-	/*
-	 * 1. launcher key mapped to (KSI_3, KSO_0):
-	 *    change actual_key_mask[0] = 0x14 to 0x1c
-	 * 2. T11 key not in keyboard (KSI_0,KSO_1):
-	 *    change actual_key_mask[1] from 0xff to 0xfe
-	 */
-	 .actual_key_mask = {
-         0x1c, 0xfe, 0xff, 0xff, 0xff, 0xf5, 0xff,
-	 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca
-	 },
-	/* Other values should be the same as the default configuration. */
-	.debounce_down_us = 9 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-};
-
-/* I2C port map */
-const struct i2c_port_t i2c_ports[] = {
-	{"power",   I2C_PORT_POWER,  100, GPIO_EC_I2C_POWER_SCL,
-					  GPIO_EC_I2C_POWER_SDA},
-	{"tcpc0",   I2C_PORT_TCPC0, 1000, GPIO_EC_I2C_USB_C0_PD_SCL,
-					  GPIO_EC_I2C_USB_C0_PD_SDA},
-	{"tcpc1",   I2C_PORT_TCPC1, 1000, GPIO_EC_I2C_USB_C1_PD_SCL,
-					  GPIO_EC_I2C_USB_C1_PD_SDA},
-	{"eeprom",  I2C_PORT_EEPROM, 400, GPIO_EC_I2C_EEPROM_SCL,
-					  GPIO_EC_I2C_EEPROM_SDA},
-	{"sensor",  I2C_PORT_SENSOR, 400, GPIO_EC_I2C_SENSOR_SCL,
-					  GPIO_EC_I2C_SENSOR_SDA},
-};
-
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	/* Measure VBUS through a 1/10 voltage divider */
-	[ADC_VBUS] = {
-		"VBUS",
-		NPCX_ADC_CH1,
-		ADC_MAX_VOLT * 10,
-		ADC_READ_MAX + 1,
-		0
-	},
-	/*
-	 * Adapter current output or battery charging/discharging current (uV)
-	 * 18x amplification on charger side.
-	 */
-	[ADC_AMON_BMON] = {
-		"AMON_BMON",
-		NPCX_ADC_CH2,
-		ADC_MAX_VOLT * 1000 / 18,
-		ADC_READ_MAX + 1,
-		0
-	},
-	/*
-	 * ISL9238 PSYS output is 1.44 uA/W over 5.6K resistor, to read
-	 * 0.8V @ 99 W, i.e. 124000 uW/mV. Using ADC_MAX_VOLT*124000 and
-	 * ADC_READ_MAX+1 as multiplier/divider leads to overflows, so we
-	 * only divide by 2 (enough to avoid precision issues).
-	 */
-	[ADC_PSYS] = {
-		"PSYS",
-		NPCX_ADC_CH3,
-		ADC_MAX_VOLT * 124000 * 2 / (ADC_READ_MAX + 1),
-		2,
-		0
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 },
-	/* TODO(waihong): Assign a proper frequency. */
-	[PWM_CH_DISPLIGHT] = { .channel = 5, .flags = 0, .freq = 4800 },
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/* Power Path Controller */
-struct ppc_config_t ppc_chips[] = {
-	{
-		.i2c_port = I2C_PORT_TCPC0,
-		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
-		.drv = &sn5s330_drv
-	},
-	{
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
-		.drv = &sn5s330_drv
-	},
-};
-unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
-
-/* TCPC mux configuration */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC0,
-			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-		},
-		.drv = &ps8xxx_tcpm_drv,
-	},
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC1,
-			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-		},
-		.drv = &ps8xxx_tcpm_drv,
-	},
-};
-
-/*
- * Port-0/1 USB mux driver.
- *
- * The USB mux is handled by TCPC chip and the HPD update is through a GPIO
- * to AP. But the TCPC chip is also needed to know the HPD status; otherwise,
- * the mux misbehaves.
- */
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.driver = &tcpci_tcpm_usb_mux_driver,
-		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	},
-	{
-		.usb_port = 1,
-		.driver = &tcpci_tcpm_usb_mux_driver,
-		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	}
-};
-
-const int usb_port_enable[USB_PORT_COUNT] = {
-	GPIO_EN_USB_A_5V,
-};
-
-/* BC1.2 */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_POWER,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-	{
-		.i2c_port = I2C_PORT_EEPROM,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-
-static void board_update_sensor_config_clamshell(void)
-{
-	motion_sensor_count = 0;
-	gmr_tablet_switch_disable();
-	/* The sensors are not stuffed; don't allow lines to float */
-	gpio_set_flags(GPIO_ACCEL_GYRO_INT_L,
-		       GPIO_INPUT | GPIO_PULL_DOWN);
-	gpio_set_flags(GPIO_LID_ACCEL_INT_L,
-		       GPIO_INPUT | GPIO_PULL_DOWN);
-}
-DECLARE_HOOK(HOOK_INIT, board_update_sensor_config_clamshell,
-	     HOOK_PRIO_INIT_I2C + 2);
-/* Initialize board. */
-static void board_init(void)
-{
-	/* Enable BC1.2 interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_L);
-	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_L);
-
-	/* Enable USB-A overcurrent interrupt */
-	gpio_enable_interrupt(GPIO_USB_A0_OC_ODL);
-
-	/* Enable interrupt for BMI160 sensor */
-	gpio_enable_interrupt(GPIO_ACCEL_GYRO_INT_L);
-
-	/*
-	 * The H1 SBU line for CCD are behind PPC chip. The PPC internal FETs
-	 * for SBU may be disconnected after DP alt mode is off. Should enable
-	 * the CCD_MODE_ODL interrupt to make sure the SBU FETs are connected.
-	 */
-	gpio_enable_interrupt(GPIO_CCD_MODE_ODL);
-
-	/* Set the backlight duty cycle to 0. AP will override it later. */
-	pwm_set_duty(PWM_CH_DISPLIGHT, 0);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_tcpc_init(void)
-{
-	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_late()) {
-		/* TODO(crosbug.com/p/61098): How long do we need to wait? */
-		board_reset_pd_mcu();
-	}
-
-	/* Enable PPC interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_SWCTL_INT_ODL);
-
-	/* Enable TCPC interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL);
-
-	/*
-	 * Initialize HPD to low; after sysjump SOC needs to see
-	 * HPD pulse to enable video path
-	 */
-	for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port)
-		usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED |
-					 USB_PD_MUX_HPD_IRQ_DEASSERTED);
-}
-DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C+1);
-
-void board_hibernate(void)
-{
-	int i;
-
-	/*
-	 * Sensors are unpowered in hibernate. Apply PD to the
-	 * interrupt lines such that they don't float.
-	 */
-	gpio_set_flags(GPIO_ACCEL_GYRO_INT_L,
-		       GPIO_INPUT | GPIO_PULL_DOWN);
-	gpio_set_flags(GPIO_LID_ACCEL_INT_L,
-		       GPIO_INPUT | GPIO_PULL_DOWN);
-
-	/*
-	 * Enable the PPC power sink path before EC enters hibernate;
-	 * otherwise, ACOK won't go High and can't wake EC up. Check the
-	 * bug b/170324206 for details.
-	 */
-	for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++)
-		ppc_vbus_sink_enable(i, 1);
-}
-
-/* Called on AP S0 -> S3 transition */
-static void board_chipset_suspend(void)
-{
-	/*
-	 * Turn off display backlight in S3. AP has its own control. The EC's
-	 * and the AP's will be AND'ed together in hardware.
-	 */
-	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 0);
-	pwm_enable(PWM_CH_DISPLIGHT, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S3 -> S0 transition */
-static void board_chipset_resume(void)
-{
-	/* Turn on display and keyboard backlight in S0. */
-	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 1);
-	if (pwm_get_duty(PWM_CH_DISPLIGHT))
-		pwm_enable(PWM_CH_DISPLIGHT, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);
-
-void board_set_switchcap_power(int enable)
-{
-	gpio_set_level(GPIO_SWITCHCAP_ON, enable);
-}
-
-int board_is_switchcap_enabled(void)
-{
-	return gpio_get_level(GPIO_SWITCHCAP_ON);
-}
-
-int board_is_switchcap_power_good(void)
-{
-	return gpio_get_level(GPIO_SWITCHCAP_PG);
-}
-
-void board_reset_pd_mcu(void)
-{
-	cprints(CC_USB, "Resetting TCPCs...");
-	cflush();
-
-	gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
-	gpio_set_level(GPIO_USB_C1_PD_RST_L, 0);
-	msleep(PS8XXX_RESET_DELAY_MS);
-	gpio_set_level(GPIO_USB_C0_PD_RST_L, 1);
-	gpio_set_level(GPIO_USB_C1_PD_RST_L, 1);
-	msleep(PS8805_FW_INIT_DELAY_MS);
-}
-
-void board_set_tcpc_power_mode(int port, int mode)
-{
-	/* Ignore the "mode" to turn the chip on.  We can only do a reset. */
-	if (mode)
-		return;
-
-	board_reset_pd_mcu();
-}
-
-int board_vbus_sink_enable(int port, int enable)
-{
-	/* Both ports are controlled by PPC SN5S330 */
-	return ppc_vbus_sink_enable(port, enable);
-}
-
-int board_is_sourcing_vbus(int port)
-{
-	/* Both ports are controlled by PPC SN5S330 */
-	return ppc_is_sourcing_vbus(port);
-}
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* TODO(b/120231371): Notify AP */
-	CPRINTS("p%d: overcurrent!", port);
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_real_port = (port >= 0 &&
-			    port < CONFIG_USB_PD_PORT_MAX_COUNT);
-	int i;
-
-	if (!is_real_port && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	if (port == CHARGE_PORT_NONE) {
-		CPRINTS("Disabling all charging port");
-
-		/* Disable all ports. */
-		for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
-			/*
-			 * Do not return early if one fails otherwise we can
-			 * get into a boot loop assertion failure.
-			 */
-			if (board_vbus_sink_enable(i, 0))
-				CPRINTS("Disabling p%d sink path failed.", i);
-		}
-
-		return EC_SUCCESS;
-	}
-
-	/* Check if the port is sourcing VBUS. */
-	if (board_is_sourcing_vbus(port)) {
-		CPRINTS("Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-
-	CPRINTS("New charge port: p%d", port);
-
-	/*
-	 * Turn off the other ports' sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
-		if (i == port)
-			continue;
-
-		if (board_vbus_sink_enable(i, 0))
-			CPRINTS("p%d: sink path disable failed.", i);
-	}
-
-	/* Enable requested charge port. */
-	if (board_vbus_sink_enable(port, 1)) {
-		CPRINTS("p%d: sink path enable failed.", port);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	return EC_SUCCESS;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma,
-			    int max_ma, int charge_mv)
-{
-	/*
-	 * Ignore lower charge ceiling on PD transition if our battery is
-	 * critical, as we may brownout.
-	 */
-	if (supplier == CHARGE_SUPPLIER_PD &&
-	    charge_ma < 1500 &&
-	    charge_get_percent() < CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON) {
-		CPRINTS("Using max ilim %d", max_ma);
-		charge_ma = max_ma;
-	}
-
-	charge_set_input_current_limit(MAX(charge_ma,
-					   CONFIG_CHARGER_INPUT_CURRENT),
-				       charge_mv);
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL))
-		if (gpio_get_level(GPIO_USB_C0_PD_RST_L))
-			status |= PD_STATUS_TCPC_ALERT_0;
-	if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL))
-		if (gpio_get_level(GPIO_USB_C1_PD_RST_L))
-			status |= PD_STATUS_TCPC_ALERT_1;
-
-	return status;
-}
-
-/* Mutexes */
-static struct mutex g_base_mutex;
-static struct mutex g_lid_mutex;
-
-static struct bmi_drv_data_t g_bmi160_data;
-static struct accelgyro_saved_data_t g_bma255_data;
-
-/* Matrix to rotate accelerometer into standard reference frame */
-const mat33_fp_t base_standard_ref = {
-	{ FLOAT_TO_FP(1), 0,  0},
-	{ 0,  FLOAT_TO_FP(-1),  0},
-	{ 0,  0, FLOAT_TO_FP(-1)}
-};
-
-static const mat33_fp_t lid_standard_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-	 .name = "Lid Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMA255,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_LID,
-	 .drv = &bma2x2_accel_drv,
-	 .mutex = &g_lid_mutex,
-	 .drv_data = &g_bma255_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-	 .rot_standard_ref = &lid_standard_ref,
-	 .default_range = 2, /* g, to support lid angle calculation. */
-	 .min_frequency = BMA255_ACCEL_MIN_FREQ,
-	 .max_frequency = BMA255_ACCEL_MAX_FREQ,
-	 .config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		/* Sensor on for lid angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	 },
-	},
-	/*
-	 * Note: bmi160: supports accelerometer and gyro sensor
-	 * Requirement: accelerometer sensor must init before gyro sensor
-	 * DO NOT change the order of the following table.
-	 */
-	[BASE_ACCEL] = {
-	 .name = "Base Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .rot_standard_ref = &base_standard_ref,
-	 .default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-	 .min_frequency = BMI_ACCEL_MIN_FREQ,
-	 .max_frequency = BMI_ACCEL_MAX_FREQ,
-	 .config = {
-		 [SENSOR_CONFIG_EC_S0] = {
-			 .odr = 10000 | ROUND_UP_FLAG,
-		 },
-		 /* Sensor on for lid angle detection */
-		 [SENSOR_CONFIG_EC_S3] = {
-			 .odr = 10000 | ROUND_UP_FLAG,
-		 },
-	 },
-	},
-	[BASE_GYRO] = {
-	 .name = "Gyro",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_GYRO,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .default_range = 1000, /* dps */
-	 .rot_standard_ref = &base_standard_ref,
-	 .min_frequency = BMI_GYRO_MIN_FREQ,
-	 .max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
diff --git a/board/pazquel/board.h b/board/pazquel/board.h
deleted file mode 100644
index 98f7ff2499..0000000000
--- a/board/pazquel/board.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Trogdor board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#include "baseboard.h"
-
-/* TODO(waihong): Remove the following bringup features */
-#define CONFIG_BRINGUP
-#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands. */
-#define CONFIG_USB_PD_DEBUG_LEVEL 3
-#define CONFIG_CMD_GPIO_EXTENDED
-#define CONFIG_CMD_POWERINDEBUG
-#define CONFIG_I2C_DEBUG
-
-/* Internal SPI flash on NPCX7 */
-#define CONFIG_FLASH_SIZE_BYTES (512 * 1024)  /* 512KB internal spi flash */
-
-/* Keyboard */
-#define CONFIG_KEYBOARD_PROTOCOL_MKBP
-#define CONFIG_KEYBOARD_REFRESH_ROW3
-#define CONFIG_PWM_KBLIGHT
-
-/* Battery */
-#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION"
-#define CONFIG_BATTERY_FUEL_GAUGE
-#define CONFIG_BATTERY_REVIVE_DISCONNECT
-
-/* BC 1.2 Charger */
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-/* USB */
-#define CONFIG_USB_PD_TCPM_PS8805
-#define CONFIG_USBC_PPC_SN5S330
-#define CONFIG_USB_PD_PORT_MAX_COUNT 2
-
-/* USB-A */
-#define USB_PORT_COUNT 1
-#define CONFIG_USB_PORT_POWER_DUMB
-
-/* Sensors */
-#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
-/* BMI160 Base accel/gyro */
-#define CONFIG_ACCELGYRO_BMI160
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define OPT3001_I2C_ADDR_FLAGS OPT3001_I2C_ADDR1_FLAGS
-
-/* BMA253 lid accel */
-#define CONFIG_ACCEL_BMA255
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-#define CONFIG_LID_ANGLE_UPDATE
-
-#define CONFIG_TABLET_MODE
-#define CONFIG_TABLET_MODE_SWITCH
-#define CONFIG_GMR_TABLET_MODE
-#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L
-
-/* GPIO alias */
-#define GPIO_AC_PRESENT GPIO_ACOK_OD
-#define GPIO_WP_L GPIO_EC_WP_ODL
-#define GPIO_SWITCHCAP_PG GPIO_SWITCHCAP_GPIO_1
-#define GPIO_ACOK_OD GPIO_CHG_ACOK_OD
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum adc_channel {
-	ADC_VBUS,
-	ADC_AMON_BMON,
-	ADC_PSYS,
-	ADC_CH_COUNT
-};
-
-/* Motion sensors */
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT,
-};
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT = 0,
-	PWM_CH_DISPLIGHT,
-	PWM_CH_COUNT
-};
-
-enum battery_type {
-	BATTERY_GANFENG,
-	BATTERY_TYPE_COUNT,
-};
-/* Reset all TCPCs. */
-void board_reset_pd_mcu(void);
-void board_set_tcpc_power_mode(int port, int mode);
-
-#endif /* !defined(__ASSEMBLER__) */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/pazquel/build.mk b/board/pazquel/build.mk
deleted file mode 100644
index f03287a2ee..0000000000
--- a/board/pazquel/build.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-# -*- makefile -*-
-# Copyright 2021 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m6fc
-BASEBOARD:=trogdor
-
-board-y+=battery.o
-board-y+=board.o
-board-y+=led.o
diff --git a/board/pazquel/ec.tasklist b/board/pazquel/ec.tasklist
deleted file mode 100644
index 5beeb38feb..0000000000
--- a/board/pazquel/ec.tasklist
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, ULTRA_TASK_STACK_SIZE)
diff --git a/board/pazquel/gpio.inc b/board/pazquel/gpio.inc
deleted file mode 100644
index 0d7e73fca2..0000000000
--- a/board/pazquel/gpio.inc
+++ /dev/null
@@ -1,187 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* USB interrupts */
-GPIO_INT(USB_C0_PD_INT_ODL,    PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event)  /* Interrupt from port-0 TCPC */
-GPIO_INT(USB_C1_PD_INT_ODL,    PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event)  /* Interrupt from port-1 TCPC */
-GPIO_INT(USB_C0_SWCTL_INT_ODL, PIN(0, 3), GPIO_INT_FALLING, ppc_interrupt)  /* Interrupt from port-0 PPC */
-GPIO_INT(USB_C1_SWCTL_INT_ODL, PIN(4, 0), GPIO_INT_FALLING, ppc_interrupt)  /* Interrupt from port-1 PPC */
-GPIO_INT(USB_C0_BC12_INT_L,    PIN(6, 1), GPIO_INT_FALLING, usb0_evt)  /* Interrupt from port-0 BC1.2 */
-GPIO_INT(USB_C1_BC12_INT_L,    PIN(8, 2), GPIO_INT_FALLING, usb1_evt)  /* Interrupt from port-1 BC1.2 */
-GPIO_INT(USB_A0_OC_ODL,        PIN(D, 1), GPIO_INT_BOTH | GPIO_PULL_UP, usba_oc_interrupt)
-
-/* System interrupts */
-GPIO_INT(CHG_ACOK_OD,       PIN(0, 0), GPIO_INT_BOTH, extpower_interrupt)  /* ACOK */
-GPIO_INT(CCD_MODE_ODL,      PIN(E, 3), GPIO_INT_FALLING, board_connect_c0_sbu)  /* Case Closed Debug Mode */
-GPIO_INT(EC_PWR_BTN_ODL,    PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)  /* Power button */
-GPIO_INT(EC_VOLDN_BTN_ODL,  PIN(7, 0), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)  /* Volume Up button */
-GPIO_INT(EC_VOLUP_BTN_ODL,  PIN(F, 2), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)  /* Volume Down button */
-GPIO_INT(EC_WP_ODL,         PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)  /* Write protection */
-GPIO_INT(LID_OPEN_EC,       PIN(D, 2), GPIO_INT_BOTH, lid_interrupt)  /* Lid open */
-GPIO_INT(AP_RST_L,          PIN(C, 1), GPIO_INT_BOTH | GPIO_SEL_1P8V, chipset_ap_rst_interrupt)  /* PMIC to signal AP reset */
-GPIO_INT(PS_HOLD,           PIN(A, 4), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt)  /* Indicate when AP triggers reset/shutdown */
-GPIO_INT(AP_SUSPEND,        PIN(5, 7), GPIO_INT_BOTH, power_signal_interrupt)  /* Suspend signal from PMIC */
-GPIO_INT(DEPRECATED_AP_RST_REQ, PIN(C, 2), GPIO_INT_BOTH | GPIO_PULL_DOWN | GPIO_SEL_1P8V, power_signal_interrupt) /* Deprecated AP initiated reset indicator */
-/*
- * When switch-cap is off, the POWER_GOOD signal is floating. Need a pull-down
- * to make it low. Overload the interrupt function chipset_warm_reset_interrupt
- * for not only signalling power_signal_interrupt but also handling the logic
- * of WARM_RESET_L which is pulled-up by the same rail of POWER_GOOD.
- */
-GPIO_INT(POWER_GOOD,        PIN(5, 4), GPIO_INT_BOTH | GPIO_PULL_DOWN, chipset_power_good_interrupt)  /* SRC_PP1800_S10A from PMIC */
-GPIO_INT(WARM_RESET_L,      PIN(F, 4), GPIO_INT_BOTH | GPIO_SEL_1P8V, chipset_warm_reset_interrupt)  /* AP warm reset */
-GPIO_INT(AP_EC_SPI_CS_L,    PIN(5, 3), GPIO_INT_FALLING | GPIO_PULL_DOWN, shi_cs_event)  /* EC SPI Chip Select */
-
-/* Sensor interrupts */
-GPIO_INT(TABLET_MODE_L,     PIN(C, 6), GPIO_INT_BOTH, gmr_tablet_switch_isr)
-GPIO_INT(ACCEL_GYRO_INT_L,  PIN(A, 0), GPIO_INT_FALLING, bmi160_interrupt)  /* Accelerometer/gyro interrupt */
-
-/*
- * EC_RST_ODL used to be a wake source from PSL mode. However, we disabled
- * the PSL mode. This GPIO does nothing now. Simply set it an INPUT.
- */
-GPIO(EC_RST_ODL,            PIN(0, 2), GPIO_INPUT)     /* EC reset */
-GPIO(EC_ENTERING_RW,        PIN(E, 1), GPIO_OUT_LOW)   /* Indicate when EC is entering RW code */
-GPIO(EC_BATT_PRES_ODL,      PIN(E, 5), GPIO_INPUT)     /* Battery Present */
-
-/* PMIC/AP 1.8V */
-GPIO(PMIC_RESIN_L,          PIN(3, 2), GPIO_ODR_HIGH)  /* PMIC reset trigger */
-GPIO(PMIC_KPD_PWR_ODL,      PIN(D, 6), GPIO_ODR_HIGH)  /* PMIC power button */
-GPIO(EC_INT_L,              PIN(A, 2), GPIO_ODR_HIGH)  /* Interrupt line between AP and EC */
-
-/* Power enables */
-GPIO(HIBERNATE_L,           PIN(5, 2), GPIO_OUT_HIGH)  /* EC hibernate */
-GPIO(SWITCHCAP_ON,          PIN(D, 5), GPIO_OUT_LOW)   /* Enable switch cap */
-GPIO(EN_PP3300_A,           PIN(A, 6), GPIO_OUT_LOW)   /* Enable PP3300 */
-GPIO(EN_PP5000_A,           PIN(6, 7), GPIO_OUT_LOW)   /* Enable PP5000 */
-GPIO(EC_BL_DISABLE_L,       PIN(B, 6), GPIO_OUT_LOW)   /* Backlight disable signal from EC */
-
-/* Sensors */
-GPIO(LID_ACCEL_INT_L,       PIN(5, 6), GPIO_INPUT)     /* Lid accel sensor interrupt */
-/* Control the gate for trackpad IRQ. High closes the gate.
- * This is always set low so that the OS can manage the trackpad. */
-GPIO(TRACKPAD_INT_GATE,     PIN(7, 4), GPIO_OUT_LOW)
-
-/* USB-C */
-GPIO(USB_C0_PD_RST_L,       PIN(F, 1), GPIO_OUT_HIGH)  /* Port-0 TCPC chip reset */
-GPIO(USB_C1_PD_RST_L,       PIN(E, 4), GPIO_OUT_HIGH)  /* Port-1 TCPC chip reset */
-GPIO(DP_MUX_OE_L,           PIN(9, 6), GPIO_ODR_HIGH)  /* DP mux enable, actually Open-Drain */
-GPIO(DP_MUX_SEL,            PIN(4, 5), GPIO_OUT_LOW)   /* DP mux selection: L:C0, H:C1 */
-GPIO(DP_HOT_PLUG_DET,       PIN(9, 5), GPIO_OUT_LOW)   /* DP HPD to AP */
-
-/* USB-A */
-GPIO(EN_USB_A_5V,           PIN(8, 6), GPIO_OUT_LOW)
-GPIO(USB_A_CDP_ILIM_EN_L,   PIN(7, 5), GPIO_OUT_HIGH)  /* H:CDP, L:SDP. Only one USB-A port, always CDP */
-
-/* LEDs */
-GPIO(EC_CHG_LED_Y_C0,       PIN(6, 0), GPIO_OUT_LOW)
-GPIO(EC_CHG_LED_W_C0,       PIN(C, 0), GPIO_OUT_LOW)
-GPIO(EC_CHG_LED_Y_C1,       PIN(C, 3), GPIO_OUT_LOW)
-GPIO(EC_CHG_LED_W_C1,       PIN(C, 4), GPIO_OUT_LOW)
-
-/*
- * SPI host interface - enable PDs by default. These will be made functional
- * by the SHI driver when the AP powers up, and restored back to GPIO when
- * the AP powers down.
- */
-GPIO(AP_EC_SPI_MOSI,        PIN(4, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(AP_EC_SPI_MISO,        PIN(4, 7), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(AP_EC_SPI_CLK,         PIN(5, 5), GPIO_INPUT | GPIO_PULL_DOWN)
-
-/* PWM */
-GPIO(KB_BL_PWM,             PIN(8, 0), GPIO_INPUT)     /* PWM3 */
-GPIO(EDP_BKLTCTL,           PIN(B, 7), GPIO_INPUT)     /* PWM5 */
-
-/* ADC */
-GPIO(PPVAR_BOOSTIN_SENSE,   PIN(4, 4), GPIO_INPUT)     /* ADC1 */
-GPIO(CHARGER_IADP,          PIN(4, 3), GPIO_INPUT)     /* ADC2 */
-GPIO(CHARGER_PMON,          PIN(4, 2), GPIO_INPUT)     /* ADC3 */
-
-/* I2C */
-GPIO(EC_I2C_POWER_SCL,      PIN(B, 5), GPIO_INPUT)
-GPIO(EC_I2C_POWER_SDA,      PIN(B, 4), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_PD_SCL,  PIN(9, 0), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_PD_SDA,  PIN(8, 7), GPIO_INPUT)
-GPIO(EC_I2C_USB_C1_PD_SCL,  PIN(9, 2), GPIO_INPUT)
-GPIO(EC_I2C_USB_C1_PD_SDA,  PIN(9, 1), GPIO_INPUT)
-GPIO(EC_I2C_EEPROM_SCL,     PIN(3, 3), GPIO_INPUT)
-GPIO(EC_I2C_EEPROM_SDA,     PIN(3, 6), GPIO_INPUT)
-GPIO(EC_I2C_SENSOR_SCL,     PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C_SENSOR_SDA,     PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V)
-
-/* Board/SKU IDs */
-GPIO(BRD_ID0,               PIN(C, 7), GPIO_INPUT)
-GPIO(BRD_ID1,               PIN(9, 3), GPIO_INPUT)
-GPIO(BRD_ID2,               PIN(6, 3), GPIO_INPUT)
-GPIO(SKU_ID0,               PIN(F, 0), GPIO_INPUT)
-GPIO(SKU_ID1,               PIN(4, 1), GPIO_INPUT)
-GPIO(SKU_ID2,               PIN(D, 4), GPIO_INPUT)
-
-/* Switchcap */
-/*
- * GPIO0 is configured as PVC_PG. When the chip in power down mode, it outputs
- * high-Z. Set pull-down to avoid floating.
- */
-GPIO(SWITCHCAP_GPIO_1,      PIN(E, 2), GPIO_INPUT | GPIO_PULL_DOWN) /* Switchcap GPIO0 */
-
-/* Special straps */
-GPIO(ARM_X86,               PIN(6, 6), GPIO_OUT_LOW)  /* NC, low for power saving */
-
-/* Unused GPIOs, NC. */
-UNUSED(PIN(5, 1))
-UNUSED(PIN(D, 0))
-UNUSED(PIN(F, 3))
-UNUSED(PIN(9, 4))
-UNUSED(PIN(9, 7))
-UNUSED(PIN(A, 7))
-UNUSED(PIN(B, 0))
-UNUSED(PIN(A, 5))
-UNUSED(PIN(3, 5))
-UNUSED(PIN(7, 2))
-UNUSED(PIN(8, 1))
-UNUSED(PIN(3, 7))
-UNUSED(PIN(7, 6))
-UNUSED(PIN(3, 4))
-UNUSED(PIN(C, 5))
-UNUSED(PIN(7, 3))
-UNUSED(PIN(D, 7))
-UNUSED(PIN(A, 3))
-UNUSED(PIN(6, 2))
-UNUSED(PIN(0, 4))
-UNUSED(PIN(8, 3))
-UNUSED(PIN(B, 1))
-UNUSED(PIN(5, 0))
-UNUSED(PIN(D, 3))
-
-/* Alternate functions GPIO definitions */
-ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0)            /* UART (GPIO64/65) */
-ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0)             /* I2C0 (GPIOB4/B5) */
-ALTERNATE(PIN_MASK(9, 0x07), 1, MODULE_I2C, 0)             /* I2C1 SDA (GPIO90), I2C2 (GPIO91/92) */
-ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0)             /* I2C1 SCL (GPIO87) */
-ALTERNATE(PIN_MASK(3, 0x48), 1, MODULE_I2C, 0)             /* I2C5 (GPIO33/36) */
-ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, GPIO_SEL_1P8V) /* I2C7 (GPIOB2/B3) - 1.8V */
-ALTERNATE(PIN_MASK(4, 0x1C), 0, MODULE_ADC, 0)             /* ADC1 (GPIO44), ADC2 (GPIO43), ADC3 (GPIO42) */
-ALTERNATE(PIN_MASK(4, 0xC0), 1, MODULE_SPI, GPIO_SEL_1P8V) /* SHI_SDO (GPIO47), SHI_SDI (GPIO46) */
-ALTERNATE(PIN_MASK(5, 0x28), 1, MODULE_SPI, GPIO_SEL_1P8V) /* SHI_SCLK (GPIO55), SHI_CS# (GPIO53) */
-ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0)             /* PWM3 (GPIO80) - KB_BL_PWM */
-ALTERNATE(PIN_MASK(B, 0x80), 1, MODULE_PWM, 0)             /* PWM5 (GPIOB7) - EDP_BKLTCTL */
-
-/* Keyboard */
-#define GPIO_KB_INPUT           (GPIO_INPUT | GPIO_PULL_UP)
-#define GPIO_KB_OUTPUT          (GPIO_ODR_HIGH)
-#define GPIO_KB_OUTPUT_COL2     (GPIO_OUT_LOW)
-
-/* Keyboard alternate functions */
-ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO10 (GPIO07), KSO11 (GPIO06), KSO12 (GPIO05) */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO03 (GPIO16), KSO04 (GPIO15), KSO05 (GPIO14), KSO06 (GPIO13), KSO07 (GPIO12), KSO08 (GPIO11), KSO09 (GPIO10) */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO00 (GPIO21), KSO01 (GPIO20) */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)   /* KSI2 (GPIO27), KSI3 (GPIO26), KSI4 (GPIO25), KSI5 (GPIO24), KSI6 (GPIO23), KSI7 (GPIO22) */
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)   /* KSI0 (GPIO31), KSI1 (GPIO30) */
-GPIO(EC_KSO_02_INV,       PIN(1, 7), GPIO_KB_OUTPUT_COL2)              /* KSO02 (GPIO17) */
diff --git a/board/pazquel/led.c b/board/pazquel/led.c
deleted file mode 100644
index aabf33f3f0..0000000000
--- a/board/pazquel/led.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control.
- */
-
-#include "battery.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "chipset.h"
-#include "ec_commands.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "led_common.h"
-#include "system.h"
-#include "util.h"
-
-#define LED_ONE_SEC (1000 / HOOK_TICK_INTERVAL_MS)
-#define BAT_LED_ON 1
-#define BAT_LED_OFF 0
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_BATTERY_LED,
-};
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-enum led_color {
-	LED_OFF = 0,
-	LED_RED,
-	LED_BLUE,
-	LED_COLOR_COUNT  /* Number of colors, not a color itself */
-};
-
-static void led_set_color(enum led_color color)
-{
-	gpio_set_level(GPIO_EC_CHG_LED_Y_C1,
-		(color == LED_RED) ? BAT_LED_ON : BAT_LED_OFF);
-	gpio_set_level(GPIO_EC_CHG_LED_W_C1,
-		(color == LED_BLUE) ? BAT_LED_ON : BAT_LED_OFF);
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	brightness_range[EC_LED_COLOR_RED] = 1;
-	brightness_range[EC_LED_COLOR_BLUE] = 1;
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	if (brightness[EC_LED_COLOR_BLUE] != 0)
-		led_set_color(LED_BLUE);
-	else if (brightness[EC_LED_COLOR_RED] != 0)
-		led_set_color(LED_RED);
-	else
-		led_set_color(LED_OFF);
-
-	return EC_SUCCESS;
-}
-
-static void board_led_set_battery(void)
-{
-	static int battery_ticks;
-	enum led_color color = LED_OFF;
-	int period = 0;
-	uint32_t chflags = charge_get_flags();
-
-	battery_ticks++;
-
-	switch (charge_get_state()) {
-	case PWR_STATE_CHARGE:
-		/* Always indicate amber on when charging. */
-		color = LED_RED;
-		break;
-	case PWR_STATE_DISCHARGE:
-		if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND)) {
-			/* Discharging in S3: Red 1 sec, off 3 sec */
-			period = (1 + 3) * LED_ONE_SEC;
-			battery_ticks = battery_ticks % period;
-			if (battery_ticks < 1 * LED_ONE_SEC)
-				color = LED_RED;
-			else
-				color = LED_OFF;
-		} else if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
-			/* Discharging in S5: off */
-			color = LED_OFF;
-		} else if (chipset_in_state(CHIPSET_STATE_ON)) {
-			/* Discharging in S0: Blue on */
-			color = LED_BLUE;
-		}
-		break;
-	case PWR_STATE_ERROR:
-		/* Battery error: Red 1 sec, off 1 sec */
-		period = (1 + 1) * LED_ONE_SEC;
-		battery_ticks = battery_ticks % period;
-		if (battery_ticks < 1 * LED_ONE_SEC)
-			color = LED_RED;
-		else
-			color = LED_OFF;
-		break;
-	case PWR_STATE_CHARGE_NEAR_FULL:
-		/* Full Charged: Blue on */
-		color = LED_BLUE;
-		break;
-	case PWR_STATE_IDLE: /* External power connected in IDLE */
-		if (chflags & CHARGE_FLAG_FORCE_IDLE) {
-			/* Factory mode: Blue 2 sec, Red 2 sec */
-			period = (2 + 2) * LED_ONE_SEC;
-			battery_ticks = battery_ticks % period;
-			if (battery_ticks < 2 * LED_ONE_SEC)
-				color = LED_BLUE;
-			else
-				color = LED_RED;
-		} else
-			color = LED_BLUE;
-		break;
-	default:
-		/* Other states don't alter LED behavior */
-		break;
-	}
-
-	led_set_color(color);
-}
-
-/* Called by hook task every TICK */
-static void led_tick(void)
-{
-	if (led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED))
-		board_led_set_battery();
-}
-DECLARE_HOOK(HOOK_TICK, led_tick, HOOK_PRIO_DEFAULT);
-
-void led_control(enum ec_led_id led_id, enum ec_led_state state)
-{
-	enum led_color color;
-
-	if ((led_id != EC_LED_ID_RECOVERY_HW_REINIT_LED) &&
-	    (led_id != EC_LED_ID_SYSRQ_DEBUG_LED))
-		return;
-
-	if (state == LED_STATE_RESET) {
-		led_auto_control(EC_LED_ID_BATTERY_LED, 1);
-		board_led_set_battery();
-		return;
-	}
-
-	color = state ? LED_BLUE : LED_OFF;
-
-	led_auto_control(EC_LED_ID_BATTERY_LED, 0);
-
-	led_set_color(color);
-}
diff --git a/board/pazquel/vif_override.xml b/board/pazquel/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/pazquel/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->