ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 183 deletions

diff --git a/board/pompom/gpio.inc b/board/pompom/gpio.inc
deleted file mode 100644
index 531452eae3..0000000000
--- a/board/pompom/gpio.inc
+++ /dev/null
@@ -1,183 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* USB interrupts */
-GPIO_INT(USB_C0_PD_INT_ODL,    PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event)  /* Interrupt from port-0 TCPC */
-GPIO_INT(USB_C0_SWCTL_INT_ODL, PIN(0, 3), GPIO_INT_FALLING, ppc_interrupt)  /* Interrupt from port-0 PPC */
-GPIO_INT(USB_C0_BC12_INT_L,    PIN(6, 1), GPIO_INT_FALLING | GPIO_PULL_UP, usb0_evt)  /* Interrupt from port-0 BC1.2 */
-GPIO_INT(USB_A0_OC_ODL,        PIN(D, 1), GPIO_INT_BOTH | GPIO_PULL_UP, usba_oc_interrupt)
-
-/* System interrupts */
-GPIO_INT(ACOK_OD,           PIN(0, 0), GPIO_INT_BOTH, extpower_interrupt)  /* ACOK */
-GPIO_INT(CCD_MODE_ODL,      PIN(E, 3), GPIO_INT_FALLING, board_connect_c0_sbu)  /* Case Closed Debug Mode */
-GPIO_INT(EC_PWR_BTN_ODL,    PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)  /* Power button */
-GPIO_INT(EC_VOLDN_BTN_ODL,  PIN(7, 0), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)  /* Volume Up button */
-GPIO_INT(EC_VOLUP_BTN_ODL,  PIN(F, 2), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)  /* Volume Down button */
-GPIO_INT(EC_WP_ODL,         PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)  /* Write protection */
-GPIO_INT(LID_OPEN_EC,       PIN(D, 2), GPIO_INT_BOTH, lid_interrupt)  /* Lid open */
-GPIO_INT(AP_RST_L,          PIN(C, 1), GPIO_INT_BOTH | GPIO_SEL_1P8V, chipset_ap_rst_interrupt)  /* PMIC to signal AP reset */
-GPIO_INT(PS_HOLD,           PIN(A, 4), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt)  /* Indicate when AP triggers reset/shutdown */
-GPIO_INT(AP_SUSPEND,        PIN(5, 7), GPIO_INT_BOTH, power_signal_interrupt)  /* Suspend signal from PMIC */
-GPIO_INT(DEPRECATED_AP_RST_REQ, PIN(C, 2), GPIO_INT_BOTH | GPIO_PULL_DOWN | GPIO_SEL_1P8V, power_signal_interrupt) /* Deprecated AP initiated reset indicator */
-/*
- * When switch-cap is off, the POWER_GOOD signal is floating. Need a pull-down
- * to make it low. Overload the interrupt function chipset_warm_reset_interrupt
- * for not only signalling power_signal_interrupt but also handling the logic
- * of WARM_RESET_L which is pulled-up by the same rail of POWER_GOOD.
- */
-GPIO_INT(POWER_GOOD,        PIN(5, 4), GPIO_INT_BOTH | GPIO_PULL_DOWN, chipset_power_good_interrupt)  /* SRC_PP1800_S10A from PMIC */
-GPIO_INT(WARM_RESET_L,      PIN(F, 4), GPIO_INT_BOTH | GPIO_SEL_1P8V, chipset_warm_reset_interrupt)  /* AP warm reset */
-GPIO_INT(AP_EC_SPI_CS_L,    PIN(5, 3), GPIO_INT_FALLING | GPIO_PULL_DOWN, shi_cs_event)  /* EC SPI Chip Select */
-
-/* Sensor interrupts */
-GPIO_INT(LID_360_L,         PIN(7, 2), GPIO_INT_BOTH, gmr_tablet_switch_isr)
-GPIO_INT(ACCEL_GYRO_INT_L,  PIN(A, 0), GPIO_INT_FALLING, bmi160_interrupt)  /* Accelerometer/gyro interrupt */
-
-/*
- * EC_RST_ODL acts as a wake source from hibernate mode. However, it does not
- * need to be an interrupt for normal EC operations. Simply set it an INPUT.
- */
-GPIO(EC_RST_ODL_GPIO02,     PIN(0, 2), GPIO_INPUT)     /* EC reset */
-GPIO(EC_ENTERING_RW,        PIN(E, 1), GPIO_OUT_LOW)   /* Indicate when EC is entering RW code */
-GPIO(EC_BATT_PRES_ODL,      PIN(E, 5), GPIO_INPUT)     /* Battery Present */
-
-/* PMIC/AP 1.8V */
-GPIO(PM7180_RESIN_D_L,      PIN(3, 2), GPIO_ODR_HIGH)  /* PMIC reset trigger */
-GPIO(PMIC_KPD_PWR_ODL,      PIN(D, 6), GPIO_ODR_HIGH)  /* PMIC power button */
-GPIO(EC_INT_L,              PIN(A, 2), GPIO_ODR_HIGH)  /* Interrupt line between AP and EC */
-GPIO(QSIP_ON,               PIN(5, 0), GPIO_OUT_LOW)   /* Not used, for non-switchcap testing */
-
-/* Power enables */
-GPIO(HIBERNATE_L,           PIN(5, 2), GPIO_ODR_HIGH)  /* EC hibernate */
-GPIO(SWITCHCAP_ON,          PIN(D, 5), GPIO_OUT_LOW)   /* Enable switch cap */
-GPIO(EN_PP3300_A,           PIN(A, 6), GPIO_OUT_LOW)   /* Enable PP3300 */
-GPIO(EN_PP5000_A,           PIN(6, 7), GPIO_OUT_LOW)   /* Enable PP5000 */
-GPIO(EC_BL_DISABLE_L,       PIN(B, 6), GPIO_OUT_LOW)   /* Backlight disable signal from EC */
-
-/* Sensors */
-GPIO(LID_ACCEL_INT_L,       PIN(5, 6), GPIO_INPUT)     /* Lid accel sensor interrupt */
-/* Control the gate for trackpad IRQ. High closes the gate.
- * This is always set low so that the OS can manage the trackpad. */
-GPIO(TRACKPAD_INT_GATE,     PIN(7, 4), GPIO_OUT_LOW)
-
-/* USB-C */
-GPIO(USB_C0_PD_RST_L,       PIN(F, 1), GPIO_OUT_HIGH)  /* Port-0 TCPC chip reset */
-GPIO(DP_MUX_OE_L,           PIN(9, 6), GPIO_ODR_HIGH)  /* DP mux enable, actually Open-Drain */
-GPIO(DP_MUX_SEL,            PIN(4, 5), GPIO_OUT_LOW)   /* DP mux selection: L:C0, H:C1 */
-GPIO(DP_HOT_PLUG_DET,       PIN(9, 5), GPIO_OUT_LOW)   /* DP HPD to AP */
-
-/* USB-A */
-GPIO(EN_USB_A_5V,           PIN(8, 6), GPIO_OUT_LOW)
-GPIO(USB_A_CDP_ILIM_EN,     PIN(7, 5), GPIO_OUT_HIGH)  /* H: CDP, L:SDP. Only one USB-A port, always CDP */
-
-/* LEDs */
-GPIO(EC_CHG_LED_Y_C0,       PIN(C, 3), GPIO_OUT_LOW)
-GPIO(EC_CHG_LED_W_C0,       PIN(C, 4), GPIO_OUT_LOW)
-GPIO(EC_PWR_LED_W,          PIN(6, 0), GPIO_OUT_LOW)
-
-/*
- * SPI host interface - enable PDs by default. These will be made functional
- * by the SHI driver when the AP powers up, and restored back to GPIO when
- * the AP powers down.
- */
-GPIO(AP_EC_SPI_MOSI,        PIN(4, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(AP_EC_SPI_MISO,        PIN(4, 7), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(AP_EC_SPI_CLK,         PIN(5, 5), GPIO_INPUT | GPIO_PULL_DOWN)
-
-/* PWM */
-GPIO(KB_BL_PWM,             PIN(8, 0), GPIO_INPUT)     /* PWM3 */
-GPIO(EDP_BKLTCTL,           PIN(B, 7), GPIO_INPUT)     /* PWM5 */
-
-/* ADC */
-GPIO(PPVAR_BOOSTIN_SENSE,   PIN(4, 4), GPIO_INPUT)     /* ADC1 */
-GPIO(CHARGER_IADP,          PIN(4, 3), GPIO_INPUT)     /* ADC2 */
-GPIO(CHARGER_PMON,          PIN(4, 2), GPIO_INPUT)     /* ADC3 */
-
-/* I2C */
-GPIO(EC_I2C_POWER_SCL,      PIN(B, 5), GPIO_INPUT)
-GPIO(EC_I2C_POWER_SDA,      PIN(B, 4), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_PD_SCL,  PIN(9, 0), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_PD_SDA,  PIN(8, 7), GPIO_INPUT)
-GPIO(EC_I2C_EEPROM_SCL,     PIN(3, 3), GPIO_INPUT)
-GPIO(EC_I2C_EEPROM_SDA,     PIN(3, 6), GPIO_INPUT)
-GPIO(EC_I2C_SENSOR_SCL,     PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C_SENSOR_SDA,     PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V)
-
-/* Board/SKU IDs */
-GPIO(BRD_ID0,               PIN(C, 7), GPIO_INPUT)
-GPIO(BRD_ID1,               PIN(9, 3), GPIO_INPUT)
-GPIO(BRD_ID2,               PIN(6, 3), GPIO_INPUT)
-GPIO(SKU_ID0,               PIN(F, 0), GPIO_INPUT)
-GPIO(SKU_ID1,               PIN(4, 1), GPIO_INPUT)
-GPIO(SKU_ID2,               PIN(D, 4), GPIO_INPUT)
-
-/* Switchcap */
-/*
- * GPIO0 is configured as PVC_PG. When the chip in power down mode, it outputs
- * high-Z. Set pull-down to avoid floating.
- */
-GPIO(DA9313_GPIO0,          PIN(E, 2), GPIO_INPUT | GPIO_PULL_DOWN) /* Switchcap GPIO0 */
-
-/* Special straps */
-GPIO(ARM_X86,               PIN(6, 6), GPIO_OUT_LOW)  /* NC, low for power saving */
-
-/* Unused GPIOs, NC. */
-UNUSED(PIN(5, 1))
-UNUSED(PIN(D, 0))
-UNUSED(PIN(F, 3))
-UNUSED(PIN(0, 4))
-UNUSED(PIN(C, 0))
-UNUSED(PIN(A, 7))
-UNUSED(PIN(8, 3))
-UNUSED(PIN(8, 1))
-UNUSED(PIN(3, 7))
-UNUSED(PIN(7, 6))
-UNUSED(PIN(3, 4))
-UNUSED(PIN(C, 5))
-UNUSED(PIN(C, 6))
-UNUSED(PIN(A, 3))
-UNUSED(PIN(7, 3))
-UNUSED(PIN(D, 7))
-UNUSED(PIN(A, 5))
-UNUSED(PIN(B, 0))
-UNUSED(PIN(9, 4))
-UNUSED(PIN(B, 1))
-UNUSED(PIN(6, 2))
-UNUSED(PIN(E, 4))
-UNUSED(PIN(F, 5))
-UNUSED(PIN(3, 5))
-UNUSED(PIN(9, 7))
-UNUSED(PIN(D, 3))
-
-/* Alternate functions GPIO definitions */
-ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0)            /* UART (GPIO64/65) */
-ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0)             /* I2C0 (GPIOB4/B5) */
-ALTERNATE(PIN_MASK(9, 0x07), 1, MODULE_I2C, 0)             /* I2C1 SDA (GPIO90), I2C2 (GPIO91/92) */
-ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0)             /* I2C1 SCL (GPIO87) */
-ALTERNATE(PIN_MASK(3, 0x48), 1, MODULE_I2C, 0)             /* I2C5 (GPIO33/36) */
-ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, GPIO_SEL_1P8V) /* I2C7 (GPIOB2/B3) - 1.8V */
-ALTERNATE(PIN_MASK(4, 0x1C), 0, MODULE_ADC, 0)             /* ADC1 (GPIO44), ADC2 (GPIO43), ADC3 (GPIO42) */
-ALTERNATE(PIN_MASK(4, 0xC0), 1, MODULE_SPI, GPIO_SEL_1P8V) /* SHI_SDO (GPIO47), SHI_SDI (GPIO46) */
-ALTERNATE(PIN_MASK(5, 0x28), 1, MODULE_SPI, GPIO_SEL_1P8V) /* SHI_SCLK (GPIO55), SHI_CS# (GPIO53) */
-ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0)             /* PWM3 (GPIO80) - KB_BL_PWM */
-ALTERNATE(PIN_MASK(B, 0x80), 1, MODULE_PWM, 0)             /* PWM5 (GPIOB7) - EDP_BKLTCTL */
-
-/* Keyboard */
-#define GPIO_KB_INPUT           (GPIO_INPUT | GPIO_PULL_UP)
-#define GPIO_KB_OUTPUT          (GPIO_ODR_HIGH)
-#define GPIO_KB_OUTPUT_COL2     (GPIO_OUT_LOW)
-
-/* Keyboard alternate functions */
-ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO10 (GPIO07), KSO11 (GPIO06), KSO12 (GPIO05) */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO03 (GPIO16), KSO04 (GPIO15), KSO05 (GPIO14), KSO06 (GPIO13), KSO07 (GPIO12), KSO08 (GPIO11), KSO09 (GPIO10) */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO00 (GPIO21), KSO01 (GPIO20) */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)   /* KSI2 (GPIO27), KSI3 (GPIO26), KSI4 (GPIO25), KSI5 (GPIO24), KSI6 (GPIO23), KSI7 (GPIO22) */
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)   /* KSI0 (GPIO31), KSI1 (GPIO30) */
-GPIO(EC_KSO_02_INV,       PIN(1, 7), GPIO_KB_OUTPUT_COL2)              /* KSO02 (GPIO17) */