diff options
| author | Jack Rosenthal <jrosenth@chromium.org> | 2021-11-04 12:11:58 -0600 |
|---|---|---|
| committer | Commit Bot <commit-bot@chromium.org> | 2021-11-05 04:22:34 +0000 |
| commit | 252457d4b21f46889eebad61d4c0a65331919cec (patch) | |
| tree | 01856c4d31d710b20e85a74c8d7b5836e35c3b98 /board/poppy/gpio.inc | |
| parent | 08f5a1e6fc2c9467230444ac9b582dcf4d9f0068 (diff) | |
| download | chrome-ec-stabilize-14528.B-ish.tar.gz | |
ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
Diffstat (limited to 'board/poppy/gpio.inc')
| -rw-r--r-- | board/poppy/gpio.inc | 174 |
1 files changed, 0 insertions, 174 deletions
diff --git a/board/poppy/gpio.inc b/board/poppy/gpio.inc deleted file mode 100644 index 286085d39c..0000000000 --- a/board/poppy/gpio.inc +++ /dev/null @@ -1,174 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2016 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(USB_C0_PD_INT_ODL, PIN(3, 7), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C1_PD_INT_ODL, PIN(C, 5), GPIO_INT_FALLING, tcpc_alert_event) -#ifdef CONFIG_POWER_S0IX -GPIO_INT(PCH_SLP_S0_L, PIN(7, 5), GPIO_INT_BOTH, power_signal_interrupt) -#endif -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#ifdef BOARD_LUX -GPIO_INT(PCH_SLP_S3_L, PIN(2, 2), GPIO_INT_BOTH, power_signal_interrupt) -#else -GPIO_INT(PCH_SLP_S3_L, PIN(7, 3), GPIO_INT_BOTH, power_signal_interrupt) -#endif -#endif /* CONFIG_HOSTCMD_ESPI_VW_SLP_S3 */ -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -GPIO_INT(PCH_SLP_S4_L, PIN(8, 6), GPIO_INT_BOTH, power_signal_interrupt) -#endif -GPIO_INT(PCH_SLP_SUS_L, PIN(6, 2), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(RSMRST_L_PGOOD, PIN(B, 0), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PMIC_DPWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(POWER_BUTTON_L, PIN(0, 4), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt) -GPIO_INT(LID_OPEN, PIN(6, 7), GPIO_INT_BOTH, lid_interrupt) -/* TODO(b/35585396): Make use of reverse dock signal. */ -GPIO_INT(REVERSE_DOCK, PIN(B, 7), GPIO_INT_BOTH, lid_interrupt) -GPIO_INT(VOLUME_DOWN_L, PIN(8, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(VOLUME_UP_L, PIN(8, 2), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(WP_L, PIN(4, 0), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(AC_PRESENT, PIN(C, 1), GPIO_INT_BOTH, extpower_interrupt) -GPIO_INT(USB_C0_VBUS_WAKE_L, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, vbus0_evt) -GPIO_INT(USB_C1_VBUS_WAKE_L, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, vbus1_evt) -GPIO_INT(USB_C0_BC12_INT_L, PIN(D, 3), GPIO_INT_FALLING, usb0_evt) -GPIO_INT(USB_C1_BC12_INT_L, PIN(3, 3), GPIO_INT_FALLING, usb1_evt) -#ifdef BOARD_LUX -GPIO_INT(ACCELGYRO3_INT_L, PIN(7, 3), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt) -#else -GPIO_INT(ACCELGYRO3_INT_L, PIN(3, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt) -#endif -GPIO_INT(BASE_DET_A, PIN(4, 5), GPIO_INT_BOTH, base_detect_interrupt) -GPIO_INT(USB_C0_CABLE_DET, PIN(D, 2), GPIO_INT_RISING, anx74xx_cable_det_interrupt) -#ifdef BOARD_LUX -GPIO_INT(UART_MAIN_RX, PIN(6, 4), GPIO_INT_FALLING, uart_default_pad_rx_interrupt) -#endif - -GPIO(PCH_RTCRST, PIN(2, 7), GPIO_OUT_LOW) /* RTCRST# to SOC (>= rev4) */ -GPIO(ENABLE_BACKLIGHT, PIN(2, 6), GPIO_OUT_LOW) /* Enable Backlight */ -GPIO(WLAN_OFF_L, PIN(7, 2), GPIO_OUT_LOW) /* Disable WLAN */ -GPIO(PP3300_DX_WLAN, PIN(A, 7), GPIO_OUT_LOW) /* Enable WLAN 3.3V Power */ -GPIO(CPU_PROCHOT, PIN(8, 1), GPIO_OUT_HIGH) /* PROCHOT# to SOC */ -GPIO(PCH_ACOK, PIN(5, 0), GPIO_ODR_LOW) /* ACOK to SOC */ -GPIO(PCH_WAKE_L, PIN(A, 3), GPIO_ODR_HIGH) /* Wake SOC */ -GPIO(PCH_RSMRST_L, PIN(7, 0), GPIO_OUT_LOW) /* RSMRST# to SOC */ -GPIO(PCH_PWRBTN_L, PIN(4, 1), GPIO_ODR_HIGH) /* Power Button to SOC */ -GPIO(EC_PLATFORM_RST, PIN(A, 6), GPIO_OUT_LOW) /* EC Reset to LDO_EN */ -GPIO(SYS_RESET_L, PIN(6, 1), GPIO_ODR_HIGH) /* Cold Reset to SOC */ -GPIO(PMIC_SLP_SUS_L, PIN(8, 5), GPIO_OUT_LOW) /* SLP_SUS# to PMIC */ -GPIO(BATTERY_PRESENT_L, PIN(3, 4), GPIO_INPUT) /* Battery Present */ -GPIO(CCD_MODE_ODL, PIN(6, 3), GPIO_INPUT) /* Case Closed Debug Mode */ -GPIO(EC_HAVEN_RESET_ODL, PIN(0, 2), GPIO_INPUT | GPIO_PULL_UP) /* H1 Reset (unused) */ -GPIO(ENTERING_RW, PIN(7, 6), GPIO_OUTPUT) /* EC Entering RW */ -GPIO(PMIC_INT_L, PIN(6, 0), GPIO_INPUT | GPIO_PULL_UP) /* PMIC interrupt */ -#ifndef CONFIG_POWER_S0IX -GPIO(PCH_SLP_S0_L, PIN(7, 5), GPIO_INPUT) -#endif - -/* Sensor interrupts, not implemented yet */ -GPIO(ALS_INT_L, PIN(2, 5), GPIO_INPUT) - -/* TODO(b/35585396): Make use of these GPIOs */ -GPIO(PP1800_DX_SENSOR, PIN(1, 4), GPIO_OUTPUT) -GPIO(PP3300_DX_SENSOR, PIN(2, 1), GPIO_OUTPUT) -GPIO(PP3300_USB_PD, PIN(2, 0), GPIO_OUTPUT) -/* end of TODO */ - -GPIO(PP3300_DX_LTE, PIN(0, 5), GPIO_OUT_LOW) - -#ifndef BOARD_LUX -GPIO(WLAN_PE_RST, PIN(1, 2), GPIO_OUTPUT) -GPIO(LTE_GPS_OFF_L, PIN(0, 0), GPIO_ODR_HIGH) -GPIO(LTE_BODY_SAR_L, PIN(0, 1), GPIO_ODR_HIGH) -GPIO(LTE_OFF_ODL, PIN(8, 0), GPIO_ODR_LOW) -GPIO(LTE_WAKE_L, PIN(7, 1), GPIO_INPUT) -#endif - -#ifdef BOARD_LUX -GPIO(WFCAM_VSYNC, PIN(7, 1), GPIO_INPUT) -#endif - -/* Set unused pins as Input+PU */ -#ifdef BOARD_LUX -GPIO(TP_EC_GPIO_00, PIN(0, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(TP_EC_GPIO_01, PIN(0, 1), GPIO_INPUT | GPIO_PULL_UP) -GPIO(TP_EC_GPIO_36, PIN(3, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(TP_EC_GPIO_80, PIN(8, 0), GPIO_INPUT | GPIO_PULL_UP) -#else -GPIO(TP_EC_GPIO_06, PIN(0, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(TP_EC_GPIO_22, PIN(2, 2), GPIO_INPUT | GPIO_PULL_UP) -#endif -GPIO(TP_EC_GPIO_16, PIN(1, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(TP_EC_GPIO_23, PIN(2, 3), GPIO_INPUT | GPIO_PULL_UP) -GPIO(TP_EC_GPIO_57, PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP) -GPIO(TP_EC_GPIO_B6, PIN(B, 6), GPIO_INPUT | GPIO_PULL_UP) - -#ifdef BOARD_LUX -GPIO(UART_ALT_RX, PIN(1, 0), GPIO_INPUT) -GPIO(UART_ALT_TX, PIN(1, 1), GPIO_INPUT) -GPIO(EC_COMM_PD, PIN(1, 5), GPIO_ODR_HIGH) -GPIO(EC_COMM_PU, PIN(0, 7), GPIO_INPUT) -GPIO(PPVAR_VAR_BASE, PIN(1, 2), GPIO_OUT_LOW) -#else -GPIO(PP3300_DX_BASE, PIN(1, 1), GPIO_OUT_LOW) -GPIO(TP_EC_GPIO_07, PIN(0, 7), GPIO_INPUT | GPIO_PULL_UP) -GPIO(TP_EC_GPIO_10, PIN(1, 0), GPIO_INPUT) -GPIO(TP_EC_GPIO_15, PIN(1, 5), GPIO_INPUT | GPIO_PULL_UP) -#endif - -/* I2C pins - these will be reconfigured for alternate function below */ -GPIO(I2C0_0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C0_0_USBC_3V3_SCL */ -GPIO(I2C0_0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C0_0_USBC_3V3_SDA */ -GPIO(I2C0_1_SCL, PIN(B, 3), GPIO_INPUT) /* EC_I2C0_1_3V3_SCL */ -GPIO(I2C0_1_SDA, PIN(B, 2), GPIO_INPUT) /* EC_I2C0_1_3V3_SDA */ -GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C1_3V3_SCL */ -GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C1_3V3_SDA */ -GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_I2C2_PMIC_3V3_SCL */ -GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_I2C2_PMIC_3V3_SDA */ -GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C3_SENSOR_1V8_SCL */ -GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C3_SENSOR_1V8_SDA */ - -#ifdef BOARD_LUX -GPIO(USB_C0_5V_EN, PIN(0, 6), GPIO_OUT_LOW) /* C0 5V Enable */ -#else -GPIO(USB_C0_5V_EN, PIN(4, 2), GPIO_OUT_LOW) /* C0 5V Enable */ -#endif -GPIO(USB_C0_3A_EN, PIN(6, 6), GPIO_OUT_LOW) /* C0 Enable 3A */ -GPIO(USB_C0_CHARGE_L, PIN(C, 0), GPIO_OUT_LOW) /* C0 Charge enable */ -GPIO(USB_C1_5V_EN, PIN(B, 1), GPIO_OUT_LOW) /* C1 5V Enable */ -GPIO(USB_C1_3A_EN, PIN(3, 5), GPIO_OUT_LOW) /* C1 3A Enable */ -GPIO(USB_C1_CHARGE_L, PIN(C, 3), GPIO_OUT_LOW) /* C1 Charge enable */ -GPIO(USB_C0_PD_RST_L, PIN(0, 3), GPIO_OUT_LOW) /* C0 PD Reset */ -GPIO(USB_C1_PD_RST_L, PIN(7, 4), GPIO_ODR_HIGH) /* C1 PD Reset */ -GPIO(USB_C0_DP_HPD, PIN(9, 4), GPIO_INPUT) /* C0 DP Hotplug Detect */ -GPIO(USB_C1_DP_HPD, PIN(A, 5), GPIO_INPUT) /* C1 DP Hotplug Detect */ -GPIO(USB_C0_TCPC_PWR, PIN(8, 4), GPIO_OUT_LOW) /* Enable C0 TCPC Power */ -GPIO(USB2_OTG_ID, PIN(A, 1), GPIO_OUT_LOW) /* OTG ID */ -GPIO(USB2_OTG_VBUSSENSE, PIN(9, 5), GPIO_OUT_LOW) /* OTG VBUS Sense */ - -/* LEDs (2 colors on each port) */ -GPIO(LED_YELLOW_C0, PIN(2, 4), GPIO_OUT_LOW) /* This is from rev5 */ -GPIO(LED_YELLOW_C0_OLD, PIN(3, 2), GPIO_OUT_LOW) /* This is for rev1 to rev4 */ -GPIO(LED_WHITE_C0, PIN(C, 6), GPIO_OUT_LOW) -GPIO(LED_YELLOW_C1, PIN(3, 1), GPIO_OUT_LOW) -GPIO(LED_WHITE_C1, PIN(3, 0), GPIO_OUT_LOW) - -/* Board ID */ -GPIO(BOARD_VERSION1, PIN(C, 4), GPIO_INPUT) /* Board ID bit0 */ -GPIO(BOARD_VERSION2, PIN(C, 2), GPIO_INPUT) /* Board ID bit1 */ -GPIO(BOARD_VERSION3, PIN(1, 3), GPIO_INPUT) /* Board ID bit2 */ -GPIO(BOARD_VERSION4, PIN(1, 7), GPIO_INPUT) /* Board ID strap 3 (ternary) */ - -/* Alternate functions GPIO definitions */ -ALTERNATE(PIN_MASK(6, 0x30), 1, MODULE_UART, 0) /* GPIO64-65 */ /* UART from EC to Servo */ -ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0) /* GPIO87 */ /* EC_I2C1_3V3_SDA */ -ALTERNATE(PIN_MASK(9, 0x01), 1, MODULE_I2C, 0) /* GPIO90 */ /* EC_I2C1_3V3_SCL */ -ALTERNATE(PIN_MASK(9, 0x06), 1, MODULE_I2C, 0) /* GPIO91-92 */ /* EC_I2C2_PMIC_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0) /* GPIOB4-B5 */ /* EC_I2C0_0_USBC_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, 0) /* GPOPB2-B3 */ /* EC_I2C0_1_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(D, 0x03), 1, MODULE_I2C, 0) /* GPIOD0-D1 */ /* EC_I2C3_SENSOR_1V8_SDA/SCL */ |