diff options
| author | Jack Rosenthal <jrosenth@chromium.org> | 2021-11-04 12:11:58 -0600 |
|---|---|---|
| committer | Commit Bot <commit-bot@chromium.org> | 2021-11-05 04:22:34 +0000 |
| commit | 252457d4b21f46889eebad61d4c0a65331919cec (patch) | |
| tree | 01856c4d31d710b20e85a74c8d7b5836e35c3b98 /board/rammus/gpio.inc | |
| parent | 08f5a1e6fc2c9467230444ac9b582dcf4d9f0068 (diff) | |
| download | chrome-ec-stabilize-14345.B-ish.tar.gz | |
ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
Diffstat (limited to 'board/rammus/gpio.inc')
| -rw-r--r-- | board/rammus/gpio.inc | 125 |
1 files changed, 0 insertions, 125 deletions
diff --git a/board/rammus/gpio.inc b/board/rammus/gpio.inc deleted file mode 100644 index 1e05cbe9a7..0000000000 --- a/board/rammus/gpio.inc +++ /dev/null @@ -1,125 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(USB_C0_PD_INT_ODL, PIN(3, 7), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C1_PD_INT_ODL, PIN(C, 5), GPIO_INT_FALLING | GPIO_PULL_UP, tcpc_alert_event) -#ifdef CONFIG_POWER_S0IX -GPIO_INT(SLP_S0_L, PIN(7, 5), GPIO_INT_BOTH, power_signal_interrupt) -#endif -GPIO_INT(SLP_SUS_L_PCH, PIN(6, 2), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(ROP_EC_RSMRST_L, PIN(B, 0), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(ROP_DSW_PWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PWR_BTN_ODL, PIN(0, 4), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt) -GPIO_INT(LID_OPEN, PIN(6, 7), GPIO_INT_BOTH, lid_interrupt) -GPIO_INT(VOLDN_BTN, PIN(8, 3), GPIO_INT_BOTH, button_interrupt) -GPIO_INT(VOLUP_BTN, PIN(3, 6), GPIO_INT_BOTH, button_interrupt) -GPIO_INT(WP_L, PIN(4, 0), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(ROP_EC_ACOK, PIN(C, 1), GPIO_INT_BOTH, extpower_interrupt) -GPIO_INT(USB_C0_VBUS_DET_L, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, vbus0_evt) -GPIO_INT(USB_C1_VBUS_DET_L, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, vbus1_evt) -GPIO_INT(USB_C0_BC12_INT_L, PIN(D, 3), GPIO_INT_FALLING, usb0_evt) -GPIO_INT(USB_C1_BC12_INT_L, PIN(3, 3), GPIO_INT_FALLING, usb1_evt) -GPIO_INT(BASE_SIXAXIS_INT_L, PIN(7, 3), GPIO_INT_FALLING | GPIO_SEL_1P8V, motion_interrupt) -GPIO_INT(TABLET_MODE, PIN(C, 6), GPIO_INT_BOTH, gmr_tablet_switch_isr) - -GPIO(EN_PP3300_TRACKPAD, PIN(4, 5), GPIO_OUT_LOW) /* Enable TouchPad */ -GPIO(PCH_RTCRST, PIN(8, 2), GPIO_OUT_LOW) /* RTCRST# to SOC */ -GPIO(BL_DISABLE_L, PIN(5, 6), GPIO_OUT_LOW) /* Enable Backlight */ -GPIO(WLAN_OFF_L, PIN(7, 2), GPIO_OUT_LOW) /* Disable WLAN */ -GPIO(EN_PP3300_DX_WLAN, PIN(A, 7), GPIO_OUT_LOW) /* Enable WLAN 3.3V Power */ -GPIO(PCH_PROCHOT, PIN(8, 1), GPIO_OUT_HIGH) /* PROCHOT# to SOC */ -GPIO(PCH_ACPRESENT, PIN(5, 0), GPIO_ODR_LOW) /* ACOK to SOC */ -GPIO(PCH_WAKE_L, PIN(A, 3), GPIO_ODR_HIGH) /* Wake SOC */ -GPIO(PCH_RSMRST_L, PIN(7, 0), GPIO_OUT_LOW) /* RSMRST# to SOC */ -GPIO(PCH_PWR_BTN_L, PIN(C, 4), GPIO_ODR_HIGH) /* Power Button to SOC */ -GPIO(PLATFORM_RST, PIN(A, 6), GPIO_OUT_LOW) /* EC Reset to LDO_EN */ -GPIO(SYS_RESET_L, PIN(6, 1), GPIO_ODR_HIGH) /* Cold Reset to SOC */ -GPIO(SLP_SUS_L_PMIC, PIN(8, 5), GPIO_OUT_LOW) /* SLP_SUS# to PMIC */ -GPIO(BATT_PRES_L, PIN(3, 4), GPIO_INPUT) /* Battery Present */ -GPIO(CCD_MODE_ODL, PIN(6, 3), GPIO_INPUT) /* Case Closed Debug Mode */ -GPIO(ENTERING_RW, PIN(7, 6), GPIO_OUTPUT) /* EC Entering RW */ -GPIO(ROP_EC_INT_L, PIN(6, 0), GPIO_INPUT) /* PMIC interrupt */ -GPIO(KB_BL_EN, PIN(7, 1), GPIO_OUT_LOW) /* Keyboard backlight enable */ -#ifndef CONFIG_POWER_S0IX -GPIO(SLP_S0_L, PIN(7, 5), GPIO_INPUT) -#endif - -/* Sensor Power */ -GPIO(EN_PP1800_DX_SENSOR, PIN(E, 7), GPIO_OUT_LOW) - -/* Reserved, no function */ -GPIO(EN_PP3300_USB_PD, PIN(0, 1), GPIO_INPUT) -/* Reserved, output low to disable Board ID ADC by default */ -GPIO(BRD_ID_EN, PIN(0, 2), GPIO_OUT_LOW) /* Enable for board ID ADC */ -/* Reserved, for the lid accelerator interrupt */ -GPIO(LID_ACCEL_INT_L, PIN(D, 2), GPIO_INPUT | GPIO_SEL_1P8V | GPIO_PULL_UP) /* LID Accelerator interrupt */ -/* Reserved, changing touchpad interrupt behavior for wakeup */ -GPIO(TP_INT_CONN, PIN(C, 2), GPIO_INPUT) /* Touchpad interrupt */ -/* Reserved, output low to enable touchpad interrupt by default */ -GPIO(TP_INT_EN, PIN(A, 1), GPIO_OUT_LOW) /* Enable Touchpad interrupt */ - -/* I2C pins - these will be reconfigured for alternate function below */ -GPIO(I2C0_0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C0_0_USBC_3V3_SCL */ -GPIO(I2C0_0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C0_0_USBC_3V3_SDA */ -GPIO(I2C0_1_SCL, PIN(B, 3), GPIO_INPUT) /* EC_I2C0_1_USBC_3V3_SCL */ -GPIO(I2C0_1_SDA, PIN(B, 2), GPIO_INPUT) /* EC_I2C0_1_USBC_3V3_SDA */ -GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C1_3V3_SCL */ -GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C1_3V3_SDA */ -GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_I2C2_PMIC_3V3_SCL */ -GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_I2C2_PMIC_3V3_SDA */ -GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C3_SENSOR_1V8_SCL */ -GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C3_SENSOR_1V8_SDA */ - -/* rev0: 5V enables: INPUT=1.5A, OUT_LOW=OFF, OUT_HIGH=3A */ -GPIO(EN_USB_C0_5V_OUT, PIN(3, 2), GPIO_OUT_LOW) /* C0 5V Enable */ -GPIO(EN_USB_C0_3A, PIN(6, 6), GPIO_OUT_LOW) /* C0 Enable 3A */ -GPIO(EN_USB_C0_CHARGE_EC_L, PIN(C, 0), GPIO_OUT_LOW) /* C0 Charge enable */ -GPIO(EN_USB_C1_5V_OUT, PIN(B, 1), GPIO_OUT_LOW) /* C1 5V Enable */ -GPIO(EN_USB_C1_3A, PIN(3, 5), GPIO_OUT_LOW) /* C1 3A Enable */ -GPIO(EN_USB_C1_CHARGE_EC_L, PIN(C, 3), GPIO_OUT_LOW) /* C1 Charge enable */ -GPIO(USB_PD_RST_C0, PIN(0, 3), GPIO_OUT_LOW) /* C0 PD Reset */ -GPIO(USB_C1_PD_RST_ODL, PIN(7, 4), GPIO_ODR_HIGH) /* C1 PD Reset */ -GPIO(USB_C0_DP_HPD, PIN(9, 4), GPIO_INPUT) /* C0 DP Hotplug Detect */ -GPIO(USB_C1_DP_HPD, PIN(A, 5), GPIO_INPUT) /* C1 DP Hotplug Detect */ -GPIO(USB2_ID2, PIN(9, 5), GPIO_OUT_LOW) /* USB OTG ID */ - -/* USB Type-A control */ -GPIO(USB_A_CHARGE_EN_L, PIN(0, 0), GPIO_OUT_LOW) -GPIO(EN_USB_A_5V, PIN(8, 4), GPIO_OUT_LOW) - -/* LEDs */ -GPIO(CHG_LED1, PIN(8, 0), GPIO_OUT_LOW) -GPIO(CHG_LED2, PIN(B, 7), GPIO_OUT_LOW) -GPIO(PWR_LED, PIN(8, 6), GPIO_OUT_LOW) - -/* Alternate functions GPIO definitions */ -/* UART pins */ -ALTERNATE(PIN_MASK(6, 0x30), 1, MODULE_UART, 0) /* GPIO64-65 */ /* UART from EC to Servo */ - -/* I2C pins */ -ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0) /* GPIO87 */ /* EC_I2C1_3V3_SDA */ -ALTERNATE(PIN_MASK(9, 0x01), 1, MODULE_I2C, 0) /* GPIO90 */ /* EC_I2C1_3V3_SCL */ -ALTERNATE(PIN_MASK(9, 0x06), 1, MODULE_I2C, 0) /* GPIO91-92 */ /* EC_I2C2_PMIC_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0) /* GPIOB4-B5 */ /* EC_I2C0_0_USBC_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, 0) /* GPOPB2-B3 */ /* EC_I2C0_1_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(D, 0x03), 1, MODULE_I2C, 0) /* GPIOD0-D1 */ /* EC_I2C3_SENSOR_1V8_SDA/SCL */ - -/* PWM pins */ -ALTERNATE(PIN_MASK(B, 0x40), 1, MODULE_PWM, 0) /* GPIOB6 */ /* PWM KB Backlight */ - -/* Keyboard pins */ -#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP) -#define GPIO_KB_OUTPUT (GPIO_ODR_HIGH) -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* GPIO30-31 */ /* KSI_00-01 */ -ALTERNATE(PIN_MASK(2, 0xfc), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* GPIO22-27 */ /* KSI_02-07 */ -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) /* GPIO20-21 */ /* KSO_00-01 */ -ALTERNATE(PIN_MASK(1, 0x7f), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) /* GPIO10-16 */ /* KSO_03-09 */ -ALTERNATE(PIN_MASK(0, 0xe0), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) /* GPIO05-07 */ /* KSO_10-12 */ -GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW) /* EC_KSO_02_INV */ |