ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 355 deletions

diff --git a/board/redrix/sensors.c b/board/redrix/sensors.c
deleted file mode 100644
index f720a7cd32..0000000000
--- a/board/redrix/sensors.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "common.h"
-#include "accelgyro.h"
-#include "adc_chip.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "driver/als_tcs3400_public.h"
-#include "hooks.h"
-#include "motion_sense.h"
-#include "temp_sensor.h"
-#include "thermal.h"
-#include "temp_sensor/thermistor.h"
-
-/* ADC configuration */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_1_DDR] = {
-		.name = "TEMP_DDR",
-		.input_ch = NPCX_ADC_CH0,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-	[ADC_TEMP_SENSOR_2_SOC] = {
-		.name = "TEMP_SOC",
-		.input_ch = NPCX_ADC_CH1,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-	[ADC_TEMP_SENSOR_3_CHARGER] = {
-		.name = "TEMP_CHARGER",
-		.input_ch = NPCX_ADC_CH6,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-	[ADC_TEMP_SENSOR_4_REGULATOR] = {
-		.name = "TEMP_REGULATOR",
-		.input_ch = NPCX_ADC_CH7,
-		.factor_mul = ADC_MAX_VOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-K_MUTEX_DEFINE(g_lid_accel_mutex);
-K_MUTEX_DEFINE(g_base_accel_mutex);
-static struct accelgyro_saved_data_t g_bma253_data;
-static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;
-
-static const mat33_fp_t lid_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-static const mat33_fp_t base_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
-	.als_cal.scale = 1,
-	.als_cal.uscale = 0,
-	.als_cal.offset = 0,
-	.als_cal.channel_scale = {
-		.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc from VPD */
-		.cover_scale = ALS_CHANNEL_SCALE(1.0),     /* CT */
-	},
-};
-
-/*
- * TODO: b/184702900 need to calibrate ALS/RGB sensor. At default settings,
- * shining phone flashlight on sensor pegs all readings at 0xFFFF.
- */
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
-	.calibration.rgb_cal[X] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.rgb_cal[Y] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Z] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.irt = INT_TO_FP(1),
-	.saturation.again = TCS_DEFAULT_AGAIN,
-	.saturation.atime = TCS_DEFAULT_ATIME,
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMA255,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &bma2x2_accel_drv,
-		.mutex = &g_lid_accel_mutex,
-		.drv_data = &g_bma253_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref, /* identity matrix */
-		.default_range = 2, /* g */
-		.min_frequency = BMA255_ACCEL_MIN_FREQ,
-		.max_frequency = BMA255_ACCEL_MAX_FREQ,
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on for lid angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_accel_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-				MOTIONSENSE_TYPE_ACCEL),
-		.int_signal = GPIO_EC_IMU_INT_R_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.default_range = 4,  /* g */
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_accel_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-				MOTIONSENSE_TYPE_GYRO),
-		.int_signal = GPIO_EC_IMU_INT_R_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	},
-
-	[CLEAR_ALS] = {
-		.name = "Clear Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT,
-		.location = MOTIONSENSE_LOC_CAMERA,
-		.drv = &tcs3400_drv,
-		.drv_data = &g_tcs3400_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-		.min_frequency = TCS3400_LIGHT_MIN_FREQ,
-		.max_frequency = TCS3400_LIGHT_MAX_FREQ,
-		.config = {
-			/* Run ALS sensor in S0 */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 1000,
-			},
-		},
-	},
-
-	[RGB_ALS] = {
-		/*
-		 * RGB channels read by CLEAR_ALS and so the i2c port and
-		 * address do not need to be defined for RGB_ALS.
-		 */
-		.name = "RGB Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT_RGB,
-		.location = MOTIONSENSE_LOC_CAMERA,
-		.drv = &tcs3400_rgb_drv,
-		.drv_data = &g_tcs3400_rgb_data,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-	},
-};
-const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
-static void board_sensors_init(void)
-{
-	/* Enable interrupt for the TCS3400 color light sensor */
-	gpio_enable_interrupt(GPIO_EC_ALS_RGB_INT_R_L);
-	/* Enable gpio interrupt for base accelgyro sensor */
-	gpio_enable_interrupt(GPIO_EC_IMU_INT_R_L);
-}
-DECLARE_HOOK(HOOK_INIT, board_sensors_init, HOOK_PRIO_INIT_I2C + 1);
-
-/* Temperature sensor configuration */
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_1_DDR] = {
-		.name = "DDR",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v3_30k9_47k_4050b,
-		.idx = ADC_TEMP_SENSOR_1_DDR
-	},
-	[TEMP_SENSOR_2_SOC] = {
-		.name = "SOC",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v3_30k9_47k_4050b,
-		.idx = ADC_TEMP_SENSOR_2_SOC
-	},
-	[TEMP_SENSOR_3_CHARGER] = {
-		.name = "Charger",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v3_30k9_47k_4050b,
-		.idx = ADC_TEMP_SENSOR_3_CHARGER
-	},
-	[TEMP_SENSOR_4_REGULATOR] = {
-		.name = "Regulator",
-		.type = TEMP_SENSOR_TYPE_BOARD,
-		.read = get_temp_3v3_30k9_47k_4050b,
-		.idx = ADC_TEMP_SENSOR_4_REGULATOR
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/*
- * TODO(b/195673113): Need to update for Alder Lake/redrix
- */
-static const struct ec_thermal_config thermal_ddr = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-	},
-	.temp_fan_off = C_TO_K(35),
-	.temp_fan_max = C_TO_K(50),
-};
-
-/*
- * TODO(b/195673113): Need to update for Alder Lake/redrix
- *
- * Tiger Lake specifies 100 C as maximum TDP temperature.  THRMTRIP# occurs at
- * 130 C.  However, sensor is located next to SOC, so we need to use the lower
- * SOC temperature limit (85 C)
- */
-static const struct ec_thermal_config thermal_cpu = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-	},
-	.temp_fan_off = C_TO_K(35),
-	.temp_fan_max = C_TO_K(50),
-};
-
-/*
- * TODO(b/195673113): Need to update for Alder Lake/redrix
- */
-static const struct ec_thermal_config thermal_charger = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(80),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(85),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-	},
-	.temp_fan_off = C_TO_K(40),
-	.temp_fan_max = C_TO_K(55),
-};
-
-/*
- * TODO(b/195673113): Need to update for Alder Lake/redrix
- */
-static const struct ec_thermal_config thermal_regulator = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(80),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(85),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-	},
-	.temp_fan_off = C_TO_K(40),
-	.temp_fan_max = C_TO_K(55),
-};
-
-/* this should really be "const" */
-struct ec_thermal_config thermal_params[] = {
-	[TEMP_SENSOR_1_DDR] = thermal_ddr,
-	[TEMP_SENSOR_2_SOC] = thermal_cpu,
-	[TEMP_SENSOR_3_CHARGER] = thermal_charger,
-	[TEMP_SENSOR_4_REGULATOR] = thermal_regulator,
-};
-BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);