ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 328 deletions

diff --git a/board/reef_mchp/board.h b/board/reef_mchp/board.h
deleted file mode 100644
index c9b2704530..0000000000
--- a/board/reef_mchp/board.h
+++ /dev/null
@@ -1,328 +0,0 @@
-/* Copyright 2016 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Reef board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/*
- * By default, enable all console messages excepted HC, ACPI and event:
- * The sensor stack is generating a lot of activity.
- */
-#define CC_DEFAULT     (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC)))
-#undef CONFIG_HOSTCMD_DEBUG_MODE
-#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF
-
-/* EC console on UART 0 */
-#define CONFIG_UART_CONSOLE 0
-
-/* EC console commands  */
-#define CONFIG_CMD_ACCELS
-#define CONFIG_CMD_ACCEL_INFO
-#define CONFIG_CMD_BATT_MFG_ACCESS
-#define CONFIG_CMD_CHARGER_ADC_AMON_BMON
-#define CONFIG_CHARGER_SENSE_RESISTOR		10
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC	10
-#define BD9995X_IOUT_GAIN_SELECT \
-		BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_GAIN_SET_20V
-
-#define CONFIG_CHARGER_PSYS_READ
-#define BD9995X_PSYS_GAIN_SELECT \
-		BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_GAIN_SET_02UAW
-
-#define CONFIG_CMD_I2C_STRESS_TEST
-#define CONFIG_CMD_I2C_STRESS_TEST_ACCEL
-#define CONFIG_CMD_I2C_STRESS_TEST_ALS
-#define CONFIG_CMD_I2C_STRESS_TEST_BATTERY
-#define CONFIG_CMD_I2C_STRESS_TEST_CHARGER
-#define CONFIG_CMD_I2C_STRESS_TEST_TCPC
-
-/* Battery */
-#define CONFIG_BATTERY_DEVICE_CHEMISTRY  "LION"
-#define CONFIG_BATTERY_CUT_OFF
-#define CONFIG_BATTERY_PRESENT_CUSTOM
-#define CONFIG_BATTERY_SMART
-
-/* Charger */
-#define CONFIG_CHARGE_MANAGER
-#define CONFIG_CHARGE_RAMP_SW
-#define CONFIG_CHARGER
-#define CONFIG_CHARGER_BD9995X
-#define CONFIG_CHARGER_BD9995X_CHGEN
-#define CONFIG_CHARGER_DISCHARGE_ON_AC
-#define CONFIG_CHARGER_INPUT_CURRENT 512
-#define CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT 1
-#define CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW 18000
-#define CONFIG_CHARGER_MAINTAIN_VBAT
-#undef CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON
-#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 1
-#define CONFIG_USB_CHARGER
-#define CONFIG_CHARGER_PROFILE_OVERRIDE
-#define CONFIG_CHARGER_PROFILE_OVERRIDE_COMMON
-#undef  CONFIG_CHARGER_PROFILE_VOLTAGE_RANGES
-#define CONFIG_CHARGER_PROFILE_VOLTAGE_RANGES 3
-#define CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT
-
-/* USB-A config */
-#define CONFIG_USB_PORT_POWER_SMART
-#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP
-#define CONFIG_USB_PORT_POWER_SMART_SIMPLE
-#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT
-#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1
-#define GPIO_USB1_ILIM_SEL GPIO_USB_A_CHARGE_EN_L
-#define GPIO_USB_CTL1 GPIO_EN_PP5000
-
-#define CONFIG_TABLET_MODE
-
-/* USB PD config */
-#define CONFIG_HOSTCMD_PD_CONTROL
-#define CONFIG_USB_PD_ALT_MODE
-#define CONFIG_USB_PD_ALT_MODE_DFP
-#define CONFIG_USB_PD_DUAL_ROLE
-#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
-#define CONFIG_USB_PD_DISCHARGE_TCPC
-#define CONFIG_USB_PD_LOGGING
-#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0
-#define CONFIG_USB_PD_PORT_MAX_COUNT 2
-#define CONFIG_USB_PD_VBUS_DETECT_CHARGER
-#define CONFIG_USB_PD_TCPC_LOW_POWER
-#define CONFIG_USB_PD_TCPM_MUX  /* for both PS8751 and ANX3429 */
-#define CONFIG_USB_PD_TCPM_ANX3429 /* Silicon on Reef is ANX3429 */
-#define CONFIG_USB_PD_TCPM_PS8751
-#define CONFIG_USB_PD_TCPM_TCPCI
-#define CONFIG_USB_PD_TRY_SRC
-#define CONFIG_USB_POWER_DELIVERY
-#define CONFIG_USB_PD_TCPMV1
-#define CONFIG_USB_PD_COMM_LOCKED
-
-#define CONFIG_USBC_SS_MUX
-#define CONFIG_USBC_SS_MUX_DFP_ONLY
-#define CONFIG_USBC_VCONN
-#define CONFIG_USBC_VCONN_SWAP
-
-/* SoC / PCH */
-#define CONFIG_HOSTCMD_LPC
-#define CONFIG_CHIPSET_APOLLOLAKE
-#define CONFIG_CHIPSET_RESET_HOOK
-#define CONFIG_POWER_BUTTON
-#define CONFIG_POWER_BUTTON_X86
-#define CONFIG_POWER_COMMON
-#define CONFIG_POWER_S0IX
-#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE
-
-/* EC */
-#define CONFIG_ADC
-#define CONFIG_EXTPOWER_GPIO
-#undef   CONFIG_EXTPOWER_DEBOUNCE_MS
-#define  CONFIG_EXTPOWER_DEBOUNCE_MS 1000
-#define CONFIG_FPU
-#define CONFIG_HOSTCMD_FLASH_SPI_INFO
-#define CONFIG_I2C
-#define CONFIG_I2C_CONTROLLER
-
-#define CONFIG_KEYBOARD_PROTOCOL_8042
-#define CONFIG_KEYBOARD_COL2_INVERTED
-#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI2
-#define CONFIG_LED_COMMON
-#define CONFIG_LID_SWITCH
-#define CONFIG_LOW_POWER_IDLE
-#define CONFIG_LTO
-#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30
-#define CONFIG_PWM
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_THERMISTOR_NCP15WB
-#define CONFIG_DPTF
-#define CONFIG_SCI_GPIO GPIO_PCH_SCI_L
-#define CONFIG_VOLUME_BUTTONS
-#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL
-#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL
-#define CONFIG_VBOOT_HASH
-#define CONFIG_BACKLIGHT_LID
-#define CONFIG_WIRELESS
-#define CONFIG_WIRELESS_SUSPEND EC_WIRELESS_SWITCH_WLAN_POWER
-#define CONFIG_WLAN_POWER_ACTIVE_LOW
-#define  WIRELESS_GPIO_WLAN_POWER GPIO_WIRELESS_GPIO_WLAN_POWER
-#define CONFIG_PWR_STATE_DISCHARGE_FULL
-
-/*
- * During shutdown sequence TPS65094x PMIC turns off the sensor rails
- * asynchronously to the EC. If we access the sensors when the sensor power
- * rails are off we get I2C errors. To avoid this issue, defer switching
- * the sensors rate if in S3. By the time deferred function is serviced if
- * the chipset is in S5 we can back out from switching the sensor rate.
- *
- * Time taken by V1P8U rail to go down from S3 is 30ms to 60ms hence defer
- * the sensor switching after 60ms.
- */
-#undef CONFIG_MOTION_SENSE_SUSPEND_DELAY_US
-#define CONFIG_MOTION_SENSE_SUSPEND_DELAY_US (MSEC * 60)
-
-/*
- * MEC1701H loads firmware using QMSPI controller
- * CONFIG_SPI_FLASH_PORT is the index into
- * spi_devices[] in board.c
- */
-#define CONFIG_SPI_FLASH_PORT 0
-#define CONFIG_SPI_FLASH
-
-#define CONFIG_FLASH_SIZE_BYTES 524288
-#define CONFIG_SPI_FLASH_REGS
-#define CONFIG_SPI_FLASH_W25Q40	/* FIXME: Should be GD25LQ40? */
-
-/*
- * Enable 1 slot of secure temporary storage to support
- * suspend/resume with read/write memory training.
- */
-#define CONFIG_VSTORE
-#define CONFIG_VSTORE_SLOT_COUNT 1
-
-/* Optional feature - used by MCHP */
-#define CONFIG_CLOCK_CRYSTAL /* interposer board uses parallel crystal */
-#define CONFIG_WATCHDOG_HELP /* required for MCHP MEC17xx */
-#define CONFIG_BOARD_PRE_INIT
-
-/* I2C ports */
-#define I2C_CONTROLLER_COUNT	4
-#define I2C_PORT_COUNT		5
-
-#define I2C_PORT_GYRO			MCHP_I2C_PORT6
-#define I2C_PORT_LID_ACCEL		MCHP_I2C_PORT7
-#define I2C_PORT_ALS			MCHP_I2C_PORT7
-#define I2C_PORT_BARO			MCHP_I2C_PORT7
-#define I2C_PORT_BATTERY		MCHP_I2C_PORT3
-#define I2C_PORT_CHARGER		MCHP_I2C_PORT3
-/* Accelerometer and Gyroscope are the same device. */
-#define I2C_PORT_ACCEL			I2C_PORT_GYRO
-
-/* Sensors */
-#define CONFIG_MKBP_EVENT
-#define CONFIG_MKBP_USE_HOST_EVENT
-#define CONFIG_ACCELGYRO_BMI160
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_MAG_BMI_BMM150
-#define CONFIG_ACCELGYRO_SEC_ADDR_FLAGS BMM150_ADDR0_FLAGS
-#define CONFIG_MAG_CALIBRATE
-#define CONFIG_ACCEL_KX022
-#define CONFIG_ALS_OPT3001
-#define CONFIG_BARO_BMP280
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-/* Enable sensor fifo, must also define the _SIZE and _THRES */
-#define CONFIG_ACCEL_FIFO
-/* FIFO size is in power of 2. */
-#define CONFIG_ACCEL_FIFO_SIZE 1024
-/* Depends on how fast the AP boots and typical ODRs */
-#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
-
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-/* ADC signal */
-enum adc_channel {
-	ADC_TEMP_SENSOR_CHARGER,	/* ADC0 */
-	ADC_TEMP_SENSOR_AMB,		/* ADC1 */
-	ADC_BOARD_ID,			/* ADC2 */
-	ADC_CH_COUNT
-};
-
-enum pwm_channel {
-	PWM_CH_LED_GREEN = 0,
-	PWM_CH_LED_RED,
-	/* Number of PWM channels */
-	PWM_CH_COUNT
-};
-
-enum temp_sensor_id {
-	TEMP_SENSOR_BATTERY = 0,
-	TEMP_SENSOR_AMBIENT,
-	TEMP_SENSOR_CHARGER,
-	TEMP_SENSOR_COUNT
-};
-
-/* MCHP - new Reef code not using TASK_ALS */
-/*
- * For backward compatibility, to report ALS via ACPI,
- * Define the number of ALS sensors: motion_sensor copy the data to the ALS
- * memmap region.
- */
-#define CONFIG_ALS
-#define ALS_COUNT 1
-
-/*
- * Motion sensors:
- * When reading through IO memory is set up for sensors (LPC is used),
- * the first 2 entries must be accelerometers, then gyroscope.
- * For BMI160, accel, gyro and compass sensors must be next to each other.
- */
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	BASE_MAG,
-	BASE_BARO,
-	LID_ALS,	/* firmware-reef-9042.B doesn't have this */
-	SENSOR_COUNT,
-};
-
-enum reef_board_version {
-	BOARD_VERSION_UNKNOWN = -1,
-	BOARD_VERSION_1,
-	BOARD_VERSION_2,
-	BOARD_VERSION_3,
-	BOARD_VERSION_4,
-	BOARD_VERSION_5,
-	BOARD_VERSION_6,
-	BOARD_VERSION_7,
-	BOARD_VERSION_8,
-	BOARD_VERSION_COUNT,
-};
-
-/* TODO: determine the following board specific type-C power constants */
-/* FIXME(dhendrix): verify all of the below PD_* numbers */
-/*
- * delay to turn on the power supply max is ~16ms.
- * delay to turn off the power supply max is about ~180ms.
- */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY  30000  /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */
-
-/* delay to turn on/off vconn */
-
-/* Define typical operating power and max power */
-#define PD_OPERATING_POWER_MW 15000
-#define PD_MAX_POWER_MW       45000
-#define PD_MAX_CURRENT_MA     3000
-#define PD_MAX_VOLTAGE_MV     20000
-
-/* Reset PD MCU */
-void board_reset_pd_mcu(void);
-
-int board_get_version(void);
-
-void board_set_tcpc_power_mode(int port, int mode);
-void board_print_tcpc_fw_version(int port);
-
-/* Map I2C port to controller */
-int board_i2c_p2c(int port);
-
-/* MCHP - firwmare-reef-9042.B does have LID_ALS bit
- * because its using TASK_ALS ?
- */
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK \
-	(BIT(LID_ACCEL) | BIT(BASE_BARO) | BIT(LID_ALS))
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */