ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

8 files changed, 0 insertions, 945 deletions

diff --git a/board/stryke/battery.c b/board/stryke/battery.c
deleted file mode 100644
index 0144c049b5..0000000000
--- a/board/stryke/battery.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all Stryke battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* SMP LIS Dell FMXMT Battery Information */
-	[BATTERY_SMP_LIS] = {
-		.fuel_gauge = {
-			.manuf_name = "SMP-LIS3.78",
-			.ship_mode = {
-				.reg_addr = 0x0,
-				.reg_data = { 0x10, 0x10 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x2000,
-				.disconnect_val = 0x2000,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 8800,
-			.voltage_normal		= 7660, /* mV */
-			.voltage_min		= 6000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 60,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* SMP SDI Dell FMXMT Battery Information */
-	[BATTERY_SMP_SDI] = {
-		.fuel_gauge = {
-			.manuf_name = "SMP-SDI-3727",
-			.ship_mode = {
-				.reg_addr = 0x0,
-				.reg_data = { 0x10, 0x10 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x2000,
-				.disconnect_val = 0x2000,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 8800,
-			.voltage_normal		= 7660, /* mV */
-			.voltage_min		= 6000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 60,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 60,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SMP_SDI;
diff --git a/board/stryke/board.c b/board/stryke/board.c
deleted file mode 100644
index 3275ff7fa9..0000000000
--- a/board/stryke/board.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Stryke board-specific configuration */
-
-#include "adc.h"
-#include "button.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "ec_commands.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "spi.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "thermal.h"
-#include "temp_sensor/thermistor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_pd.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* GPIO to enable/disable the USB Type-A port. */
-const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = {
-	GPIO_EN_USB_A_5V,
-};
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_INT_ODL:
-		sn5s330_interrupt(0);
-		break;
-
-	case GPIO_USB_C1_PPC_INT_ODL:
-		sn5s330_interrupt(1);
-		break;
-
-	default:
-		break;
-	}
-}
-
-static void tcpc_alert_event(enum gpio_signal signal)
-{
-	int port = -1;
-
-	switch (signal) {
-	case GPIO_USB_C0_TCPC_INT_ODL:
-		port = 0;
-		break;
-	case GPIO_USB_C1_TCPC_INT_ODL:
-		port = 1;
-		break;
-	default:
-		return;
-	}
-
-	schedule_deferred_pd_interrupt(port);
-}
-
-static void hdmi_hpd_interrupt(enum gpio_signal signal)
-{
-	baseboard_mst_enable_control(MST_HDMI, gpio_get_level(signal));
-}
-
-static void bc12_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-		break;
-
-	case GPIO_USB_C1_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-		break;
-
-	default:
-		break;
-	}
-}
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-/******************************************************************************/
-/* SPI devices */
-const struct spi_device_t spi_devices[] = {
-};
-const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
-
-/******************************************************************************/
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT]   = { .channel = 3, .flags = 0, .freq = 10000 },
-	[PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN,
-			.freq = 25000},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/******************************************************************************/
-/* USB-C TPCP Configuration */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC0,
-			.addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS,
-		},
-		.drv = &anx7447_tcpm_drv,
-		.flags = TCPC_FLAGS_RESET_ACTIVE_HIGH,
-	},
-	[USB_PD_PORT_TCPC_1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC1,
-			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-		},
-		.drv = &ps8xxx_tcpm_drv,
-	},
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.usb_port = USB_PD_PORT_TCPC_0,
-		.driver = &anx7447_usb_mux_driver,
-		.hpd_update = &anx7447_tcpc_update_hpd_status,
-	},
-	[USB_PD_PORT_TCPC_1] = {
-		.usb_port = USB_PD_PORT_TCPC_1,
-		.driver = &tcpci_tcpm_usb_mux_driver,
-		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	}
-};
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USB_PD_PORT_TCPC_0] = {
-		.i2c_port = I2C_PORT_PPC0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-
-	[USB_PD_PORT_TCPC_1] = {
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-
-/******************************************************************************/
-/* Sensors */
-/* Base Sensor mutex */
-static struct mutex g_base_mutex;
-static struct mutex g_lid_mutex;
-
-/* Base accel private data */
-static struct bmi_drv_data_t g_bmi160_data;
-
-/* BMA255 private data */
-static struct accelgyro_saved_data_t g_bma255_data;
-
-/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-/*
- * TODO(b/124337208): P0 boards don't have this sensor mounted so the rotation
- * matrix can't be tested properly. This needs to be revisited after EVT to make
- * sure the rotaiton matrix for the lid sensor is correct.
- */
-static const mat33_fp_t lid_standard_ref = {
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMA255,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &bma2x2_accel_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_bma255_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.min_frequency = BMA255_ACCEL_MIN_FREQ,
-		.max_frequency = BMA255_ACCEL_MAX_FREQ,
-		.default_range = 2, /* g, to support lid angle calculation. */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_ACCEL_MIN_FREQ,
-		.max_frequency = BMI_ACCEL_MAX_FREQ,
-		.default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI160,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi160_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi160_data,
-		.port = I2C_PORT_ACCEL,
-		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-		.default_range = 1000, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_GYRO_MIN_FREQ,
-		.max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-
-const struct fan_conf fan_conf_0 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = MFT_CH_0,	/* Use MFT id to control fan */
-	.pgood_gpio = -1,
-	.enable_gpio = GPIO_EN_PP5000_FAN,
-};
-
-/* Default */
-const struct fan_rpm fan_rpm_0 = {
-	.rpm_min = 3100,
-	.rpm_start = 3100,
-	.rpm_max = 6900,
-};
-
-const struct fan_t fans[FAN_CH_COUNT] = {
-	[FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, },
-};
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
-	[MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SENSOR_1] = {
-		"TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_TEMP_SENSOR_2] = {
-		"TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_1] = {.name = "Temp1",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_30k9_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_1},
-	[TEMP_SENSOR_2] = {.name = "Temp2",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_30k9_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_2},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-
-/* Stryke Temperature sensors */
-/*
- * TODO(b/124316213): These setting need to be reviewed and set appropriately
- * for Stryke. They matter when the EC is controlling the fan as opposed to DPTF
- * control.
- */
-const static struct ec_thermal_config thermal_a = {
-	.temp_host = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_WARN] = 0,
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-		[EC_TEMP_THRESH_HALT] = 0,
-	},
-	.temp_fan_off = C_TO_K(25),
-	.temp_fan_max = C_TO_K(50),
-};
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_fans(void)
-{
-	thermal_params[TEMP_SENSOR_1] = thermal_a;
-	thermal_params[TEMP_SENSOR_2] = thermal_a;
-}
-
-/* Sets the gpio flags correct taking into account warm resets */
-static void reset_gpio_flags(enum gpio_signal signal, int flags)
-{
-	/*
-	 * If the system was already on, we cannot set the value otherwise we
-	 * may change the value from the previous image which could cause a
-	 * brownout.
-	 */
-	if (system_is_reboot_warm() || system_jumped_late())
-		flags &= ~(GPIO_LOW | GPIO_HIGH);
-
-	gpio_set_flags(signal, flags);
-}
-
-/* Runtime GPIO defaults */
-enum gpio_signal gpio_en_pp5000_a = GPIO_EN_PP5000_A_V1;
-
-static void board_gpio_set_pp5000(void)
-{
-	uint32_t board_id = 0;
-
-	/* Errors will count as board_id 0 */
-	cbi_get_board_version(&board_id);
-
-	if (board_id == 0) {
-		reset_gpio_flags(GPIO_EN_PP5000_A_V0, GPIO_OUT_LOW);
-		/* Change runtime default for V0 */
-		gpio_en_pp5000_a = GPIO_EN_PP5000_A_V0;
-	} else if (board_id >= 1) {
-		reset_gpio_flags(GPIO_EN_PP5000_A_V1, GPIO_OUT_LOW);
-	}
-
-}
-
-static void board_init(void)
-{
-	/* Initialize Fans */
-	setup_fans();
-	/* Enable gpio interrupt for base accelgyro sensor */
-	gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-	/* Enable HDMI HPD interrupt. */
-	gpio_enable_interrupt(GPIO_HDMI_CONN_HPD);
-	/* Select correct gpio signal for PP5000_A control */
-	board_gpio_set_pp5000();
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* Check that port number is valid. */
-	if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
-		return;
-
-	/* Note that the level is inverted because the pin is active low. */
-	gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented);
-}
-
-bool board_is_convertible(void)
-{
-	const uint8_t sku = get_board_sku();
-
-	return (sku == 255);
-}
diff --git a/board/stryke/board.h b/board/stryke/board.h
deleted file mode 100644
index 4bc1839787..0000000000
--- a/board/stryke/board.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Stryke board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Baseboard features */
-#include "baseboard.h"
-
-#define CONFIG_POWER_BUTTON
-#define CONFIG_KEYBOARD_PROTOCOL_8042
-#define CONFIG_LED_COMMON
-#define CONFIG_LOW_POWER_IDLE
-
-#define CONFIG_HOSTCMD_ESPI
-
-#undef CONFIG_UART_TX_BUF_SIZE
-#define CONFIG_UART_TX_BUF_SIZE 4096
-
-/* Keyboard features */
-#define CONFIG_PWM_KBLIGHT
-
-/* Sensors */
-/* BMI160 Base accel/gyro */
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCELGYRO_BMI160
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCELGYRO_BMI160_INT2_OUTPUT
-/* BMA253 Lid accel */
-#define CONFIG_ACCEL_BMA255
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-#define CONFIG_LID_ANGLE_UPDATE
-
-/* USB Type C and USB PD defines */
-#define CONFIG_USB_PD_COMM_LOCKED
-#define CONFIG_USB_PD_TCPM_ANX7447
-#define CONFIG_USB_PD_TCPM_ANX7447_AUX_PU_PD
-#define CONFIG_USB_PD_TCPM_PS8751
-#define BOARD_TCPC_C0_RESET_HOLD_DELAY ANX74XX_RESET_HOLD_MS
-#define BOARD_TCPC_C0_RESET_POST_DELAY ANX74XX_RESET_HOLD_MS
-#define BOARD_TCPC_C1_RESET_HOLD_DELAY PS8XXX_RESET_DELAY_MS
-#define BOARD_TCPC_C1_RESET_POST_DELAY 0
-#define GPIO_USB_C1_TCPC_RST GPIO_USB_C1_TCPC_RST_ODL
-
-/* USB Type A Features */
-#define CONFIG_USB_PORT_POWER_SMART
-#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT
-#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1
-#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY
-#define GPIO_USB1_ILIM_SEL GPIO_EN_USB_A_LOW_PWR_OD
-
-/* BC 1.2 */
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-/* Charger features */
-/*
- * The IDCHG current limit is set in 512 mA steps. The value set here is
- * somewhat specific to the battery pack being currently used. The limit here
- * was set based on the battery's discharge current limit and what was tested to
- * prevent the AP rebooting with low charge level batteries.
- *
- * TODO(b/133447140): Revisit this threshold once peak power consumption tuning
- * for the AP is completed.
- */
-#define CONFIG_CHARGER_BQ25710_IDCHG_LIMIT_MA 8192
-
-/* Volume Button feature */
-#define CONFIG_VOLUME_BUTTONS
-#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL
-
-/* Fan features */
-#define CONFIG_FANS 1
-#undef CONFIG_FAN_INIT_SPEED
-#define CONFIG_FAN_INIT_SPEED 50
-#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_A_RAILS
-#define CONFIG_THERMISTOR
-#define CONFIG_THROTTLE_AP
-#define CONFIG_STEINHART_HART_3V3_30K9_47K_4050B
-
-/* MST */
-/*
- * TDOD (b/124068003): This inherently assumes the MST chip is connected to only
- * one Type C port. This will need to be chagned to support 2 Type C ports
- * connected to the same MST chip.
- */
-#define USB_PD_PORT_TCPC_MST USB_PD_PORT_TCPC_1
-
-/*
- * Macros for GPIO signals used in common code that don't match the
- * schematic names. Signal names in gpio.inc match the schematic and are
- * then redefined here to so it's more clear which signal is being used for
- * which purpose.
- */
-#define GPIO_PCH_RSMRST_L	GPIO_EC_PCH_RSMRST_L
-#define GPIO_PCH_SLP_S0_L	GPIO_SLP_S0_L
-#define GPIO_CPU_PROCHOT	GPIO_EC_PROCHOT_ODL
-#define GPIO_AC_PRESENT		GPIO_ACOK_OD
-#define GPIO_RSMRST_L_PGOOD	GPIO_PG_EC_RSMRST_L
-#define GPIO_PCH_SYS_PWROK	GPIO_EC_PCH_SYS_PWROK
-#define GPIO_PCH_SLP_S3_L	GPIO_SLP_S3_L
-#define GPIO_PCH_SLP_S4_L	GPIO_SLP_S4_L
-#define GPIO_EN_PP5000		GPIO_EN_PP5000_A
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-/* GPIO signals updated base on board version. */
-#define GPIO_EN_PP5000_A gpio_en_pp5000_a
-extern enum gpio_signal gpio_en_pp5000_a;
-
-enum adc_channel {
-	ADC_TEMP_SENSOR_1,	/* ADC0 */
-	ADC_TEMP_SENSOR_2,	/* ADC1 */
-	ADC_CH_COUNT
-};
-
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT,
-};
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT,
-	PWM_CH_FAN,
-	PWM_CH_COUNT
-};
-
-enum fan_channel {
-	FAN_CH_0 = 0,
-	/* Number of FAN channels */
-	FAN_CH_COUNT,
-};
-
-enum mft_channel {
-	MFT_CH_0 = 0,
-	/* Number of MFT channels */
-	MFT_CH_COUNT,
-};
-
-enum temp_sensor_id {
-	TEMP_SENSOR_1,
-	TEMP_SENSOR_2,
-	TEMP_SENSOR_COUNT
-};
-
-/* List of possible batteries */
-enum battery_type {
-	BATTERY_SMP_LIS,
-	BATTERY_SMP_SDI,
-	BATTERY_TYPE_COUNT,
-};
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/stryke/build.mk b/board/stryke/build.mk
deleted file mode 100644
index 733912454f..0000000000
--- a/board/stryke/build.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# -*- makefile -*-
-# Copyright 2019 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m6fc
-BASEBOARD:=hatch
-
-board-y=board.o led.o
-board-$(CONFIG_BATTERY_SMART)+=battery.o
diff --git a/board/stryke/ec.tasklist b/board/stryke/ec.tasklist
deleted file mode 100644
index 4a1024a091..0000000000
--- a/board/stryke/ec.tasklist
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE)
-
diff --git a/board/stryke/gpio.inc b/board/stryke/gpio.inc
deleted file mode 100644
index 8b241b2850..0000000000
--- a/board/stryke/gpio.inc
+++ /dev/null
@@ -1,144 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* Wake Source interrupts */
-GPIO_INT(LID_OPEN,             PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt)
-GPIO_INT(WP_L,                 PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)              /* EC_WP_ODL */
-GPIO_INT(POWER_BUTTON_L,       PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)        /* MECH_PWR_BTN_ODL */
-GPIO_INT(ACOK_OD,              PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt)
-
-/* Power sequencing interrupts */
-GPIO_INT(SLP_S0_L,             PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt)
-#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3
-GPIO_INT(SLP_S3_L,             PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt)
-#endif
-#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S4
-GPIO_INT(SLP_S4_L,             PIN(D, 4), GPIO_INT_BOTH, power_signal_interrupt)
-#endif
-GPIO_INT(PG_EC_RSMRST_L,       PIN(E, 2), GPIO_INT_BOTH, intel_x86_rsmrst_signal_interrupt)
-GPIO_INT(PG_EC_ALL_SYS_PWRGD,  PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PP5000_A_PG_OD,       PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt)
-
-/* Sensor Interrupts */
-GPIO_INT(BASE_SIXAXIS_INT_L,   PIN(5, 6), GPIO_INT_FALLING, bmi160_interrupt)
-
-/* USB-C interrupts */
-GPIO_INT(USB_C0_PPC_INT_ODL,   PIN(E, 0), GPIO_INT_FALLING, ppc_interrupt)
-GPIO_INT(USB_C1_PPC_INT_ODL,   PIN(A, 2), GPIO_INT_FALLING, ppc_interrupt)
-GPIO_INT(USB_C0_TCPC_INT_ODL,  PIN(6, 2), GPIO_INT_FALLING, tcpc_alert_event)
-GPIO_INT(USB_C1_TCPC_INT_ODL,  PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event)
-GPIO_INT(USB_C0_BC12_INT_ODL,  PIN(9, 5), GPIO_INT_FALLING, bc12_interrupt)
-GPIO_INT(USB_C1_BC12_INT_ODL,  PIN(E, 4), GPIO_INT_FALLING, bc12_interrupt)
-
-GPIO_INT(HDMI_CONN_HPD,        PIN(7, 2), GPIO_INT_BOTH, hdmi_hpd_interrupt)
-
-/* Volume button interrupts */
-GPIO_INT(EC_VOLDN_BTN_ODL,     PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
-GPIO_INT(EC_VOLUP_BTN_ODL,     PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
-
-
-GPIO(SYS_RESET_L,              PIN(C, 5), GPIO_ODR_HIGH)        /* SYS_RST_ODL */
-GPIO(ENTERING_RW,              PIN(E, 3), GPIO_OUT_LOW)         /* EC_ENTERING_RW */
-GPIO(PCH_WAKE_L,               PIN(7, 4), GPIO_ODR_HIGH)        /* EC_PCH_WAKE_ODL */
-GPIO(PCH_PWRBTN_L,             PIN(C, 1), GPIO_ODR_HIGH)        /* EC_PCH_PWR_BTN_ODL */
-
-/* Power Sequencing Signals */
-GPIO(EN_PP5000_A_V1,           PIN(A, 4), GPIO_DEFAULT)
-GPIO(EN_PP5000_A_V0,           PIN(7, 3), GPIO_DEFAULT)
-GPIO(EN_A_RAILS,               PIN(A, 3), GPIO_OUT_LOW)
-GPIO(EC_PCH_RSMRST_L,          PIN(A, 6), GPIO_OUT_LOW)
-GPIO(EC_PROCHOT_ODL,           PIN(6, 3), GPIO_ODR_HIGH)
-GPIO(EC_PROCHOT_IN_OD,         PIN(3, 4), GPIO_INPUT)
-GPIO(EC_PCH_SYS_PWROK,         PIN(3, 7), GPIO_OUT_LOW)
-GPIO(CPU_C10_GATE_L,           PIN(6, 7), GPIO_INPUT)
-
-/* MKBP event synchronization */
-GPIO(EC_INT_L,                 PIN(7, 0), GPIO_ODR_HIGH)
-
-/*
- * GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an
- * interrupt handler because it is automatically handled by the PSL.
- *
- * We need to lock the setting so this gpio can't be reconfigured to overdrive
- * the real reset signal. (This is the PSL input pin not the real reset pin).
- */
-GPIO(EC_RST_ODL,		PIN(0, 2), GPIO_INT_BOTH |
-					               GPIO_HIB_WAKE_HIGH |
-					               GPIO_LOCKED)
-
-/* USB and USBC Signals */
-GPIO(USB_C_OC_ODL,             PIN(B, 1), GPIO_ODR_HIGH)
-GPIO(USB_C0_TCPC_RST,          PIN(9, 7), GPIO_OUT_LOW)
-GPIO(USB_C1_TCPC_RST_ODL,      PIN(3, 2), GPIO_ODR_HIGH)
-GPIO(EN_USB_A_5V,              PIN(3, 5), GPIO_OUT_LOW)
-GPIO(EN_USB_A_LOW_PWR_OD,      PIN(9, 4), GPIO_OUT_LOW)
-
-/* Misc Signals */
-GPIO(EC_BATT_PRES_ODL,         PIN(E, 1), GPIO_INPUT)
-GPIO(LED_1_L,                  PIN(C, 4), GPIO_OUT_HIGH)        /* Yellow (hatch) */
-GPIO(LED_2_L,                  PIN(C, 3), GPIO_OUT_HIGH)        /* White (hatch) */
-GPIO(LED_3_L,                  PIN(C, 2), GPIO_OUT_HIGH)
-GPIO(LED_4_L,                  PIN(6, 0), GPIO_OUT_HIGH)
-GPIO(EC_KB_BL_EN,              PIN(8, 6), GPIO_OUT_LOW)         /* Keyboard backlight */
-GPIO(EDP_BKLTEN_OD,            PIN(D, 3), GPIO_ODR_HIGH)        /* Display backlight */
-GPIO(EN_PP5000_FAN,            PIN(6, 1), GPIO_OUT_LOW)
-GPIO(EN_MST,                   PIN(9, 6), GPIO_OUT_LOW)
-
-
-/* I2C pins - Alternate function below configures I2C module on these pins */
-GPIO(I2C0_SCL,                 PIN(B, 5), GPIO_INPUT |
-                                          GPIO_SEL_1P8V)        /* EC_I2C_SENSOR_1V8_SCL */
-GPIO(I2C0_SDA,                 PIN(B, 4), GPIO_INPUT |
-                                          GPIO_SEL_1P8V)        /* EC_I2C_SENSOR_1V8_SDA */
-GPIO(I2C1_SCL,                 PIN(9, 0), GPIO_INPUT)           /* EC_I2C_USB_C0_PD_SCL */
-GPIO(I2C1_SDA,                 PIN(8, 7), GPIO_INPUT)           /* EC_I2C_USB_C0_PD_SDA */
-GPIO(I2C2_SCL,                 PIN(9, 2), GPIO_INPUT)           /* EC_I2C_USB_C1_PD_SCL */
-GPIO(I2C2_SDA,                 PIN(9, 1), GPIO_INPUT)           /* EC_I2C_USB_C1_PD_SDA */
-GPIO(I2C3_SCL,                 PIN(D, 1), GPIO_INPUT)           /* EC_I2C_USB_C0_TCPC_SDA */
-GPIO(I2C3_SDA,                 PIN(D, 0), GPIO_INPUT)           /* EC_I2C_USB_C0_TCPC_SCL */
-GPIO(I2C5_SCL,                 PIN(3, 3), GPIO_INPUT)           /* EC_I2C_POWER_SCL */
-GPIO(I2C5_SDA,                 PIN(3, 6), GPIO_INPUT)           /* EC_I2C_POWER_SDA */
-GPIO(I2C7_SCL,                 PIN(B, 3), GPIO_INPUT)           /* EC_I2C_EEPROM_SCL */
-GPIO(I2C7_SDA,                 PIN(B, 2), GPIO_INPUT)           /* EC_I2C_EEPROM_SDA */
-
-/* Keyboard pins */
-#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP)
-GPIO(KBD_KSO2,                 PIN(1, 7), GPIO_OUT_LOW)        /* KSO_02 inverted */
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)       /* KSI_00-01 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)       /* KSI_02-07 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)       /* KSO_00-01 */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)       /* KSO_03-09 */
-ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)       /* KSO_10-13 */
-ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)       /* KSO_14 */
-
-/* Alternate functions GPIO definitions */
-ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, (GPIO_INPUT | GPIO_SEL_1P8V))  /* I2C0 1.8V */
-ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0)                             /* I2C1 SCL / I2C2 */
-ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0)                             /* I2C1 SDA */
-ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0)                             /* I2C3 */
-ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0)                             /* I2C5 */
-ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, 0)                             /* I2C7 */
-
-/* UART */
-ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0)                            /* UART from EC to Servo */
-
-/* PWM */
-ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0)                             /* PWM3 - Keyboard backlight */
-ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0)                             /* PWM5 - FAN */
-ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0)                             /* TA1 - Fan Tachometer */
-
-/* ADC */
-ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0)                             /* ADC0-1 */
-
-/* Power Switch Logic (PSL) inputs */
-ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0)                             /* GPIOD2 = LID_OPEN */
-ALTERNATE(PIN_MASK(0, 0x07), 0, MODULE_PMU, 0)                             /* GPIO00 = ACOK_OD,
-                                                                              GPIO01 = MECH_PWR_BTN_ODL
-                                                                              GPIO02 = EC_RST_ODL */
diff --git a/board/stryke/led.c b/board/stryke/led.c
deleted file mode 100644
index f68b39361e..0000000000
--- a/board/stryke/led.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control for Stryke
- */
-
-#include "ec_commands.h"
-#include "gpio.h"
-#include "led_common.h"
-#include "led_onoff_states.h"
-#include "chipset.h"
-
-#define LED_ON_LVL 0
-#define LED_OFF_LVL 1
-
-__override const int led_charge_lvl_1 = 5;
-
-__override const int led_charge_lvl_2 = 95;
-
-__override struct led_descriptor
-			led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
-	[STATE_CHARGING_LVL_1]	     = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
-	[STATE_CHARGING_LVL_2]	     = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
-	[STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_WHITE,  LED_INDEFINITE} },
-	[STATE_DISCHARGE_S0]	     = {{LED_OFF,  LED_INDEFINITE} },
-	[STATE_DISCHARGE_S3]	     = {{LED_OFF,  LED_INDEFINITE} },
-	[STATE_DISCHARGE_S5]         = {{LED_OFF,  LED_INDEFINITE} },
-	[STATE_BATTERY_ERROR]        = {{EC_LED_COLOR_AMBER,  1 * LED_ONE_SEC},
-					{LED_OFF,	    1 * LED_ONE_SEC} },
-	[STATE_FACTORY_TEST]         = {{EC_LED_COLOR_WHITE,   2 * LED_ONE_SEC},
-					{EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC} },
-};
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_BATTERY_LED
-};
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-__override void led_set_color_battery(enum ec_led_colors color)
-{
-	switch (color) {
-	case EC_LED_COLOR_AMBER:
-		gpio_set_level(GPIO_LED_2_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_LED_1_L, LED_ON_LVL);
-		break;
-	case EC_LED_COLOR_WHITE:
-		gpio_set_level(GPIO_LED_1_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_LED_2_L, LED_ON_LVL);
-		break;
-	default: /* LED_OFF and other unsupported colors */
-		gpio_set_level(GPIO_LED_1_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_LED_2_L, LED_OFF_LVL);
-		break;
-	}
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	if (led_id == EC_LED_ID_BATTERY_LED) {
-		brightness_range[EC_LED_COLOR_AMBER] = 1;
-		brightness_range[EC_LED_COLOR_WHITE] = 1;
-	}
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	if (led_id == EC_LED_ID_BATTERY_LED) {
-		if (brightness[EC_LED_COLOR_AMBER] != 0)
-			led_set_color_battery(EC_LED_COLOR_AMBER);
-		else if (brightness[EC_LED_COLOR_WHITE] != 0)
-			led_set_color_battery(EC_LED_COLOR_WHITE);
-		else
-			led_set_color_battery(LED_OFF);
-	}
-
-	return EC_SUCCESS;
-}
-
diff --git a/board/stryke/vif_override.xml b/board/stryke/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/stryke/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->