ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 226 deletions

diff --git a/board/terrador/sensors.c b/board/terrador/sensors.c
deleted file mode 100644
index 9997591cb6..0000000000
--- a/board/terrador/sensors.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer family-specific sensor configuration */
-#include "common.h"
-#include "accelgyro.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/accelgyro_bmi260.h"
-#include "driver/als_tcs3400.h"
-#include "driver/sync.h"
-#include "keyboard_scan.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "task.h"
-#include "tablet_mode.h"
-#include "util.h"
-
-/******************************************************************************/
-/* Sensors */
-static struct mutex g_lid_accel_mutex;
-static struct mutex g_base_mutex;
-
-/* BMA253 private data */
-static struct accelgyro_saved_data_t g_bma253_data;
-
-/* BMI260 private data */
-static struct bmi_drv_data_t g_bmi260_data;
-
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
-	.als_cal.scale = 1,
-	.als_cal.uscale = 0,
-	.als_cal.offset = 0,
-	.als_cal.channel_scale = {
-		.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc from VPD */
-		.cover_scale = ALS_CHANNEL_SCALE(1.0),     /* CT */
-	},
-};
-
-/*
- * TODO: b/146166425 need to calibrate ALS/RGB sensor. At default settings,
- * shining phone flashlight on sensor pegs all readings at 0xFFFF.
- */
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
-	.calibration.rgb_cal[X] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.rgb_cal[Y] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Z] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.irt = INT_TO_FP(1),
-	.saturation.again = TCS_DEFAULT_AGAIN,
-	.saturation.atime = TCS_DEFAULT_ATIME,
-};
-
-/* Rotation matrix for the lid accelerometer */
-static const mat33_fp_t lid_standard_ref = {
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMA255,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &bma2x2_accel_drv,
-		.mutex = &g_lid_accel_mutex,
-		.drv_data = &g_bma253_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.min_frequency = BMA255_ACCEL_MIN_FREQ,
-		.max_frequency = BMA255_ACCEL_MAX_FREQ,
-		.default_range = 2, /* g, to support tablet mode */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI260,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi260_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi260_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMI260_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_ACCEL_MIN_FREQ,
-		.max_frequency = BMI_ACCEL_MAX_FREQ,
-		.default_range = 4, /* g */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI260,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi260_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi260_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMI260_ADDR0_FLAGS,
-		.default_range = 1000, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_GYRO_MIN_FREQ,
-		.max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-	[CLEAR_ALS] = {
-		.name = "Clear Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_drv,
-		.drv_data = &g_tcs3400_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-		.min_frequency = TCS3400_LIGHT_MIN_FREQ,
-		.max_frequency = TCS3400_LIGHT_MAX_FREQ,
-		.config = {
-			/* Run ALS sensor in S0 */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 1000,
-			},
-		},
-	},
-
-	[RGB_ALS] = {
-		/*
-		 * RGB channels read by CLEAR_ALS and so the i2c port and
-		 * address do not need to be defined for RGB_ALS.
-		 */
-		.name = "RGB Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT_RGB,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_rgb_drv,
-		.drv_data = &g_tcs3400_rgb_data,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
-static void baseboard_sensors_init(void)
-{
-	/* Note - BMA253 interrupt unused by EC */
-
-	/* Enable interrupt for the TCS3400 color light sensor */
-	gpio_enable_interrupt(GPIO_EC_ALS_RGB_INT_L);
-	/* Enable interrupt for the BMI260 accel/gyro sensor */
-	gpio_enable_interrupt(GPIO_EC_IMU_INT_L);
-}
-DECLARE_HOOK(HOOK_INIT, baseboard_sensors_init, HOOK_PRIO_DEFAULT);