ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

9 files changed, 0 insertions, 747 deletions

diff --git a/board/treeya/analyzestack.yaml b/board/treeya/analyzestack.yaml
deleted file mode 120000
index 9873122a08..0000000000
--- a/board/treeya/analyzestack.yaml
+++ /dev/null
@@ -1 +0,0 @@
-../../baseboard/grunt/analyzestack.yaml
\ No newline at end of file
diff --git a/board/treeya/battery.c b/board/treeya/battery.c
deleted file mode 100644
index a98a38d3e9..0000000000
--- a/board/treeya/battery.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all Treeya battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* SMP 5B10Q13163 */
-	[BATTERY_SMP] = {
-		.fuel_gauge = {
-			.manuf_name = "SMP",
-			.device_name = "L17M3PB0",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13050, /* mV */
-			.voltage_normal		= 11250, /* mV */
-			.voltage_min		= 9000,  /* mV */
-			.precharge_current	= 186,	 /* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 60,
-		},
-	},
-	/* LGC 5B10Q13162  */
-	[BATTERY_LGC] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC",
-			.device_name = "L17L3PB0",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13050, /* mV */
-			.voltage_normal		= 11400, /* mV */
-			.voltage_min		= 9000,  /* mV */
-			.precharge_current	= 181,	 /* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 73,
-		},
-	},
-	/* Sunwoda L18D3PG1  */
-	[BATTERY_SUNWODA] = {
-		.fuel_gauge = {
-			.manuf_name = "SUNWODA",
-			.device_name = "L18D3PG1",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13050, /* mV */
-			.voltage_normal		= 11250, /* mV */
-			.voltage_min		= 9000,  /* mV */
-			.precharge_current	= 200,	 /* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 60,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 60,
-		},
-	},
-
-	/* SMP L19M3PG1 */
-	[BATTERY_SMP_1] = {
-		.fuel_gauge = {
-			.manuf_name = "SMP",
-			.device_name = "L19M3PG1",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13200, /* mV */
-			.voltage_normal		= 11520, /* mV */
-			.voltage_min		= 9000,  /* mV */
-			.precharge_current	= 200,	 /* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 60,
-			.charging_min_c		= 0,
-			.charging_max_c		= 50,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 73,
-		},
-	},
-
-	/* LGC  L19L3PG1 */
-	[BATTERY_LGC_1] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC",
-			.device_name = "L19L3PG1",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13200, /* mV */
-			.voltage_normal		= 11550, /* mV */
-			.voltage_min		= 9000,  /* mV */
-			.precharge_current	= 200,	 /* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 60,
-			.charging_min_c		= 0,
-			.charging_max_c		= 50,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 73,
-		},
-	},
-
-	/* Celxpert  L19C3PG1 */
-	[BATTERY_CEL_1] = {
-		.fuel_gauge = {
-			.manuf_name = "Celxpert",
-			.device_name = "L19C3PG1",
-			.ship_mode = {
-				.reg_addr = 0x34,
-				.reg_data = { 0x0000, 0x1000 },
-			},
-			.fet = {
-				.reg_addr = 0x34,
-				.reg_mask = 0x0100,
-				.disconnect_val = 0x0100,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 13200, /* mV */
-			.voltage_normal		= 11520, /* mV */
-			.voltage_min		= 9000,  /* mV */
-			.precharge_current	= 200,	 /* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 60,
-			.charging_min_c		= 0,
-			.charging_max_c		= 50,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 70,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SMP_1;
diff --git a/board/treeya/board.c b/board/treeya/board.c
deleted file mode 100644
index 4583d89d7c..0000000000
--- a/board/treeya/board.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Treeya board-specific configuration */
-
-#include "button.h"
-#include "driver/accel_lis2dw12.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "extpower.h"
-#include "i2c.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "system.h"
-#include "switch.h"
-#include "tablet_mode.h"
-#include "task.h"
-
-#include "gpio_list.h"
-
-const enum gpio_signal hibernate_wake_pins[] = {
-	GPIO_LID_OPEN,
-	GPIO_AC_PRESENT,
-	GPIO_POWER_BUTTON_L,
-	GPIO_EC_RST_ODL,
-};
-const int hibernate_wake_pins_used =  ARRAY_SIZE(hibernate_wake_pins);
-
-/* I2C port map. */
-const struct i2c_port_t i2c_ports[] = {
-	{"power",   I2C_PORT_POWER,   100, GPIO_I2C0_SCL, GPIO_I2C0_SDA},
-	{"tcpc0",   I2C_PORT_TCPC0,   400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
-	{"tcpc1",   I2C_PORT_TCPC1,   400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
-	{"thermal", I2C_PORT_THERMAL_AP, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA},
-	{"sensor",  I2C_PORT_SENSOR,  400, GPIO_I2C7_SCL, GPIO_I2C7_SDA},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* Motion sensors */
-static struct mutex g_lid_mutex_1;
-static struct mutex g_base_mutex_1;
-
-/* Lid accel private data */
-static struct stprivate_data g_lis2dwl_data;
-/* Base accel private data */
-static struct lsm6dsm_data g_lsm6dsm_data = LSM6DSM_DATA;
-
-
-/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t lsm6dsm_base_standard_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-static const mat33_fp_t treeya_standard_ref = {
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-struct motion_sensor_t lid_accel_1 = {
-	.name = "Lid Accel",
-	.active_mask = SENSOR_ACTIVE_S0_S3,
-	.chip = MOTIONSENSE_CHIP_LIS2DWL,
-	.type = MOTIONSENSE_TYPE_ACCEL,
-	.location = MOTIONSENSE_LOC_LID,
-	.drv = &lis2dw12_drv,
-	.mutex = &g_lid_mutex_1,
-	.drv_data = &g_lis2dwl_data,
-	.port = I2C_PORT_ACCEL,
-	.i2c_spi_addr_flags = LIS2DWL_ADDR1_FLAGS,
-	.rot_standard_ref = NULL,
-	.default_range = 2, /* g */
-	.min_frequency = LIS2DW12_ODR_MIN_VAL,
-	.max_frequency = LIS2DW12_ODR_MAX_VAL,
-	.config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 12500 | ROUND_UP_FLAG,
-		},
-		/* Sensor on for lid angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	},
-};
-
-struct motion_sensor_t base_accel_1 = {
-	.name = "Base Accel",
-	.active_mask = SENSOR_ACTIVE_S0_S3,
-	.chip = MOTIONSENSE_CHIP_LSM6DSM,
-	.type = MOTIONSENSE_TYPE_ACCEL,
-	.location = MOTIONSENSE_LOC_BASE,
-	.drv = &lsm6dsm_drv,
-	.mutex = &g_base_mutex_1,
-	.drv_data = LSM6DSM_ST_DATA(g_lsm6dsm_data,
-			MOTIONSENSE_TYPE_ACCEL),
-	.int_signal = GPIO_6AXIS_INT_L,
-	.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-	.port = I2C_PORT_ACCEL,
-	.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-	.rot_standard_ref = &lsm6dsm_base_standard_ref,
-	.default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-	.min_frequency = LSM6DSM_ODR_MIN_VAL,
-	.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	.config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 13000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		},
-		/* Sensor on for angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		},
-	},
-};
-
-struct motion_sensor_t base_gyro_1 = {
-	.name = "Base Gyro",
-	.active_mask = SENSOR_ACTIVE_S0_S3,
-	.chip = MOTIONSENSE_CHIP_LSM6DSM,
-	.type = MOTIONSENSE_TYPE_GYRO,
-	.location = MOTIONSENSE_LOC_BASE,
-	.drv = &lsm6dsm_drv,
-	.mutex = &g_base_mutex_1,
-	.drv_data = LSM6DSM_ST_DATA(g_lsm6dsm_data,
-			MOTIONSENSE_TYPE_GYRO),
-	.int_signal = GPIO_6AXIS_INT_L,
-	.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-	.port = I2C_PORT_ACCEL,
-	.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-	.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-	.rot_standard_ref = &lsm6dsm_base_standard_ref,
-	.min_frequency = LSM6DSM_ODR_MIN_VAL,
-	.max_frequency = LSM6DSM_ODR_MAX_VAL,
-};
-
-static int board_use_st_sensor(void)
-{
-	/* sku_id 0xa8-0xa9 use ST sensors */
-	uint32_t sku_id = system_get_sku_id();
-
-	return sku_id == 0xa8 || sku_id == 0xa9;
-}
-
-/* treeya board will use two sets of lid/base sensor, we need update
- * sensors info according to sku id.
- */
-void board_update_sensor_config_from_sku(void)
-{
-	if (board_is_convertible()) {
-		/* sku_id a8-a9 use ST sensors */
-		if (board_use_st_sensor()) {
-			motion_sensors[LID_ACCEL] = lid_accel_1;
-			motion_sensors[BASE_ACCEL] = base_accel_1;
-			motion_sensors[BASE_GYRO] = base_gyro_1;
-		} else{
-			/*Need to change matrix for treeya*/
-			motion_sensors[BASE_ACCEL].rot_standard_ref = &treeya_standard_ref;
-			motion_sensors[BASE_GYRO].rot_standard_ref = &treeya_standard_ref;
-		}
-
-		/* Enable Gyro interrupts */
-		gpio_enable_interrupt(GPIO_6AXIS_INT_L);
-	} else {
-		motion_sensor_count = 0;
-		/* Device is clamshell only */
-		tablet_set_mode(0, TABLET_TRIGGER_LID);
-		/* Gyro is not present, don't allow line to float */
-		gpio_set_flags(GPIO_6AXIS_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-}
-
-/* bmi160 or lsm6dsm need differenct interrupt function */
-void board_bmi160_lsm6dsm_interrupt(enum gpio_signal signal)
-{
-	if (board_use_st_sensor())
-		lsm6dsm_interrupt(signal);
-	else
-		bmi160_interrupt(signal);
-}
diff --git a/board/treeya/board.h b/board/treeya/board.h
deleted file mode 100644
index 339929a873..0000000000
--- a/board/treeya/board.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Treeya board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#define VARIANT_GRUNT_TCPC_0_ANX3447
-
-#include "baseboard.h"
-
-/*
- * By default, enable all console messages excepted HC, ACPI and event:
- * The sensor stack is generating a lot of activity.
- */
-#define CC_DEFAULT     (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC)))
-#undef CONFIG_HOSTCMD_DEBUG_MODE
-#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF
-
-/* Power and battery LEDs */
-#define CONFIG_LED_COMMON
-#define CONFIG_CMD_LEDTEST
-
-#define CONFIG_LED_ONOFF_STATES
-
-/* Disable keyboard backlight */
-#undef CONFIG_PWM
-#undef CONFIG_PWM_KBLIGHT
-
-#define CONFIG_MKBP_USE_GPIO
-
-/* Motion sensing drivers */
-#define CONFIG_ACCELGYRO_BMI160
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCEL_KX022
-#define CONFIG_CMD_ACCELS
-#define CONFIG_CMD_ACCEL_INFO
-#define CONFIG_TABLET_MODE
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-/*
- * Slew rate on the PP1800_SENSOR load switch requires a short delay on startup.
- */
-#undef  CONFIG_MOTION_SENSE_RESUME_DELAY_US
-#define CONFIG_MOTION_SENSE_RESUME_DELAY_US (10 * MSEC)
-
-/* Second set of sensor drivers */
-#define CONFIG_ACCELGYRO_LSM6DSM
-#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCEL_LIS2DWL
-
-#ifndef __ASSEMBLER__
-
-
-enum battery_type {
-	BATTERY_SMP,
-	BATTERY_LGC,
-	BATTERY_SUNWODA,
-	BATTERY_SMP_1,
-	BATTERY_LGC_1,
-	BATTERY_CEL_1,
-	BATTERY_TYPE_COUNT,
-};
-
-void board_bmi160_lsm6dsm_interrupt(enum gpio_signal signal);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/treeya/build.mk b/board/treeya/build.mk
deleted file mode 100644
index 250abe6712..0000000000
--- a/board/treeya/build.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# -*- makefile -*-
-# Copyright 2019 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m6f
-BASEBOARD:=grunt
-
-board-y=board.o led.o
-board-$(CONFIG_BATTERY_SMART)+=battery.o
diff --git a/board/treeya/ec.tasklist b/board/treeya/ec.tasklist
deleted file mode 100644
index fb6e2f75a1..0000000000
--- a/board/treeya/ec.tasklist
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE)
diff --git a/board/treeya/gpio.inc b/board/treeya/gpio.inc
deleted file mode 100644
index 70e2e1b29c..0000000000
--- a/board/treeya/gpio.inc
+++ /dev/null
@@ -1,119 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-GPIO_INT(USB_C0_PD_INT_ODL,	PIN(A, 0), GPIO_INT_FALLING,			tcpc_alert_event)
-GPIO_INT(USB_C1_PD_INT_ODL,	PIN(F, 5), GPIO_INT_FALLING,			tcpc_alert_event)
-GPIO_INT(USB_C0_SWCTL_INT_ODL,	PIN(0, 3), GPIO_INT_FALLING,			ppc_interrupt)
-GPIO_INT(USB_C1_SWCTL_INT_ODL,	PIN(D, 4), GPIO_INT_FALLING,			ppc_interrupt)
-GPIO_INT(PCH_SLP_S3_L,		PIN(A, 6), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(PCH_SLP_S5_L,		PIN(A, 3), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(S0_PGOOD,		PIN(F, 4), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(S5_PGOOD,		PIN(6, 3), GPIO_INT_BOTH | GPIO_PULL_UP,	power_signal_interrupt)
-GPIO_INT(POWER_BUTTON_L,	PIN(0, 1), GPIO_INT_BOTH,			power_button_interrupt)
-GPIO_INT(LID_OPEN,		PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH | GPIO_PULL_UP,	lid_interrupt)
-GPIO_INT(AC_PRESENT,		PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH,	extpower_interrupt)
-GPIO_INT(WP_L,			PIN(A, 1), GPIO_INT_BOTH,			switch_interrupt)
-GPIO_INT(VOLUME_DOWN_L,		PIN(7, 0), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
-GPIO_INT(VOLUME_UP_L,		PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
-GPIO_INT(6AXIS_INT_L,		PIN(8, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V,	board_bmi160_lsm6dsm_interrupt)
-
-/* GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an interrupt handler. */
-GPIO(EC_RST_ODL,		PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH | GPIO_LOCKED)
-
-GPIO(EN_PWR_A,			PIN(E, 2), GPIO_OUT_LOW)			/* Enable Power */
-GPIO(EN_PP1800_SENSOR,		PIN(6, 7), GPIO_OUT_LOW)			/* Enable Power */
-GPIO(ENABLE_BACKLIGHT_L,	PIN(D, 3), GPIO_OUT_HIGH)			/* Enable Backlight */
-GPIO(PCH_RSMRST_L,		PIN(C, 2), GPIO_OUT_LOW)			/* RSMRST# to SOC */
-GPIO(PCH_PWRBTN_L,		PIN(C, 1), GPIO_OUT_HIGH)			/* Power Button to SOC */
-GPIO(PCH_WAKE_L,		PIN(7, 4), GPIO_OUT_HIGH)			/* Wake SOC */
-GPIO(SYS_RESET_L,		PIN(E, 4), GPIO_ODR_HIGH)			/* Cold Reset to SOC */
-GPIO(CCD_MODE_ODL,		PIN(E, 3), GPIO_INPUT)				/* Case Closed Debug Mode */
-GPIO(ENTERING_RW,		PIN(E, 1), GPIO_OUT_LOW)			/* EC Entering RW */
-GPIO(EC_BATT_PRES_L,		PIN(E, 5), GPIO_INPUT | GPIO_PULL_UP)		/* Battery Present */
-GPIO(PCH_SYS_PWROK,		PIN(D, 6), GPIO_OUT_LOW)			/* Power OK to SOC */
-GPIO(CPU_PROCHOT,		PIN(3, 4), GPIO_INPUT | GPIO_SEL_1P8V)		/* PROCHOT to SOC */
-GPIO(APU_ALERT_L,		PIN(A, 2), GPIO_INPUT)				/* Alert to SOC */
-GPIO(3AXIS_INT_L,		PIN(5, 0), GPIO_INPUT | GPIO_SEL_1P8V)		/* 3 Axis Accel */
-GPIO(EC_INT_L,			PIN(A, 4), GPIO_ODR_HIGH)			/* Sensor MKBP event to SOC */
-
-/* I2C pins - these will be reconfigured for alternate function below */
-GPIO(I2C0_SCL,			PIN(B, 5), GPIO_INPUT)				/* EC_I2C_POWER_SCL */
-GPIO(I2C0_SDA,			PIN(B, 4), GPIO_INPUT)				/* EC_I2C_POWER_SDA */
-GPIO(I2C1_SCL,			PIN(9, 0), GPIO_INPUT)				/* EC_I2C_USB_C0_PD_SCL */
-GPIO(I2C1_SDA,			PIN(8, 7), GPIO_INPUT)				/* EC_I2C_USB_C0_PD_SDA */
-GPIO(I2C2_SCL,			PIN(9, 2), GPIO_INPUT)				/* EC_I2C_USB_C1_PD_SCL */
-GPIO(I2C2_SDA,			PIN(9, 1), GPIO_INPUT)				/* EC_I2C_USB_C1_PD_SDA */
-GPIO(I2C3_SCL,			PIN(D, 1), GPIO_INPUT | GPIO_SEL_1P8V)		/* APU_SIC */
-GPIO(I2C3_SDA,			PIN(D, 0), GPIO_INPUT | GPIO_SEL_1P8V)		/* APU_SID */
-GPIO(I2C5_SCL,			PIN(3, 3), GPIO_INPUT)				/* EC_I2C_EEPROM_SCL and
-										   EC_I2C_KB_BL_SCL */
-GPIO(I2C5_SDA,			PIN(3, 6), GPIO_INPUT)				/* EC_I2C_EEPROM_SDA and
-										   EC_I2C_KB_BL_SDA */
-GPIO(I2C7_SCL,			PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V)		/* EC_I2C_SENSOR_SCL */
-GPIO(I2C7_SDA,			PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V)		/* EC_I2C_SENSOR_SDA */
-
-/*
- * The NPCX LPC driver configures and controls SCI and SMI,
- * so PCH_SCI_ODL [PIN(7, 6)] and PCH_SMI_ODL [PIN(C, 6)] are
- * not defined here as GPIOs.
- */
-
-GPIO(EN_USB_A0_5V,		PIN(6, 1), GPIO_OUT_LOW)			/* Enable A0 5V Charging */
-GPIO(EN_USB_A1_5V,		PIN(C, 0), GPIO_OUT_LOW)			/* Enable A1 5V Charging */
-GPIO(USB_C0_OC_L,		PIN(7, 3), GPIO_OUT_HIGH)			/* C0 Over Current */
-GPIO(USB_C1_OC_L,		PIN(7, 2), GPIO_OUT_HIGH)			/* C1 Over Current */
-GPIO(USB_C0_PD_RST,		PIN(3, 2), GPIO_OUT_HIGH)			/* C0 PD Reset */
-GPIO(USB_C1_PD_RST_L,		PIN(D, 5), GPIO_OUT_HIGH)			/* C1 PD Reset */
-GPIO(USB_C0_BC12_VBUS_ON_L,	PIN(4, 0), GPIO_ODR_HIGH)			/* C0 BC1.2 Power */
-GPIO(USB_C1_BC12_VBUS_ON_L,	PIN(B, 1), GPIO_ODR_HIGH | GPIO_PULL_UP)	/* C1 BC1.2 Power */
-GPIO(USB_C0_BC12_CHG_DET,	PIN(6, 2), GPIO_INPUT)				/* C0 BC1.2 Detect */
-GPIO(USB_C1_BC12_CHG_DET,	PIN(8, 3), GPIO_INPUT | GPIO_PULL_DOWN)		/* C1 BC1.2 Detect */
-GPIO(USB_C0_DP_HPD,		PIN(9, 5), GPIO_OUT_LOW)			/* C0 DP Hotplug Detect */
-GPIO(USB_C1_DP_HPD,		PIN(9, 6), GPIO_OUT_LOW)			/* C1 DP Hotplug Detect */
-
-/* Board ID */
-GPIO(BOARD_VERSION1,		PIN(C, 7), GPIO_INPUT)
-GPIO(BOARD_VERSION2,		PIN(9, 3), GPIO_INPUT)
-GPIO(BOARD_VERSION3,		PIN(8, 0), GPIO_INPUT)
-GPIO(SKU_ID1,			PIN(F, 0), GPIO_INPUT)
-GPIO(SKU_ID2,			PIN(4, 1), GPIO_INPUT)
-
-/* LED */
-GPIO(BAT_LED_1_L,	 PIN(C, 3), GPIO_OUT_HIGH)
-GPIO(BAT_LED_2_L,	 PIN(C, 4), GPIO_OUT_HIGH)
-GPIO(POWER_LED_3_L,	 PIN(B, 7), GPIO_OUT_HIGH)
-
-/* Alternate functions GPIO definitions */
-/* Cr50 requires no pull-ups on UART pins. */
-ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0)					/* UART from EC to Servo */
-ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0)					/* I2C0 */
-ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0)					/* I2C1 SCL / I2C2 */
-ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0)					/* I2C1 SDA */
-ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0)					/* I2C3 */
-ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0)					/* I2C5 */
-ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, 0)					/* I2C7 */
-ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0)					/* ADC0-1 */
-ALTERNATE(PIN_MASK(4, 0x02), 0, MODULE_ADC, 0)					/* ADC4 */
-ALTERNATE(PIN_MASK(F, 0x02), 0, MODULE_ADC, 0)					/* ADC8 */
-ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0)					/* ADC9 */
-
-/* Keyboard Pins */
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_00-01 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_02-07 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_00-01 */
-GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW)						/* KSO_02 inverted */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_03-09 */
-ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_10-12 */
-
-/* Power Switch Logic (PSL) inputs */
-ALTERNATE(PIN_MASK(0, 0x07), 0, MODULE_PMU, 0)					/* GPIO00 = AC_PRESENT,
-										   GPIO01 = POWER_BUTTON_L,
-										   GPIO02 = EC_RST_ODL */
-ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0)					/* GPIOD2 = LID_OPEN */
diff --git a/board/treeya/led.c b/board/treeya/led.c
deleted file mode 100644
index 9647b45e74..0000000000
--- a/board/treeya/led.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "common.h"
-#include "led_onoff_states.h"
-#include "led_common.h"
-#include "gpio.h"
-
-#define LED_OFF_LVL	1
-#define LED_ON_LVL	0
-
-__override const int led_charge_lvl_1 = 5;
-
-__override const int led_charge_lvl_2 = 97;
-
-__override struct led_descriptor
-			led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
-	[STATE_CHARGING_LVL_1]	     = {{EC_LED_COLOR_RED, LED_INDEFINITE} },
-	[STATE_CHARGING_LVL_2]	     = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
-	[STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_GREEN,  LED_INDEFINITE} },
-	[STATE_DISCHARGE_S0]	     = {{LED_OFF,            LED_INDEFINITE} },
-	[STATE_DISCHARGE_S3]	     = {{LED_OFF,            LED_INDEFINITE} },
-	[STATE_DISCHARGE_S5]         = {{LED_OFF,            LED_INDEFINITE} },
-	[STATE_BATTERY_ERROR]        = {{EC_LED_COLOR_RED, 1 * LED_ONE_SEC},
-					{LED_OFF,            1 * LED_ONE_SEC} },
-	[STATE_FACTORY_TEST]         = {{EC_LED_COLOR_RED,  2 * LED_ONE_SEC},
-					{EC_LED_COLOR_GREEN, 2 * LED_ONE_SEC} },
-};
-
-__override const struct led_descriptor
-			led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = {
-	[PWR_LED_STATE_ON]           = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
-	[PWR_LED_STATE_SUSPEND_AC]   = {{EC_LED_COLOR_WHITE, 3 * LED_ONE_SEC},
-				{LED_OFF,          0.5 * LED_ONE_SEC} },
-	[PWR_LED_STATE_SUSPEND_NO_AC] = {{LED_OFF, LED_INDEFINITE} },
-	[PWR_LED_STATE_OFF]           = {{LED_OFF, LED_INDEFINITE} },
-};
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_BATTERY_LED,
-	EC_LED_ID_POWER_LED
-};
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-__override void led_set_color_power(enum ec_led_colors color)
-{
-	if (color == EC_LED_COLOR_WHITE)
-		gpio_set_level(GPIO_POWER_LED_3_L, LED_ON_LVL);
-	else
-		/* LED_OFF and unsupported colors */
-		gpio_set_level(GPIO_POWER_LED_3_L, LED_OFF_LVL);
-}
-
-__override void led_set_color_battery(enum ec_led_colors color)
-{
-	switch (color) {
-	case EC_LED_COLOR_RED:
-		gpio_set_level(GPIO_BAT_LED_1_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_BAT_LED_2_L, LED_ON_LVL);
-		break;
-	case EC_LED_COLOR_AMBER:
-		gpio_set_level(GPIO_BAT_LED_1_L, LED_ON_LVL);
-		gpio_set_level(GPIO_BAT_LED_2_L, LED_ON_LVL);
-		break;
-	case EC_LED_COLOR_GREEN:
-		gpio_set_level(GPIO_BAT_LED_1_L, LED_ON_LVL);
-		gpio_set_level(GPIO_BAT_LED_2_L, LED_OFF_LVL);
-		break;
-	default: /* LED_OFF and other unsupported colors */
-		gpio_set_level(GPIO_BAT_LED_1_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_BAT_LED_2_L, LED_OFF_LVL);
-		break;
-	}
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	if (led_id == EC_LED_ID_BATTERY_LED) {
-		brightness_range[EC_LED_COLOR_RED] = 1;
-		brightness_range[EC_LED_COLOR_AMBER] = 1;
-		brightness_range[EC_LED_COLOR_GREEN] = 1;
-	} else if (led_id == EC_LED_ID_POWER_LED) {
-		brightness_range[EC_LED_COLOR_WHITE] = 1;
-	}
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	if (led_id == EC_LED_ID_BATTERY_LED) {
-		if (brightness[EC_LED_COLOR_RED] != 0)
-			led_set_color_battery(EC_LED_COLOR_RED);
-		else if (brightness[EC_LED_COLOR_AMBER] != 0)
-			led_set_color_battery(EC_LED_COLOR_AMBER);
-		else if (brightness[EC_LED_COLOR_GREEN] != 0)
-			led_set_color_battery(EC_LED_COLOR_GREEN);
-		else
-			led_set_color_battery(LED_OFF);
-	} else if (led_id == EC_LED_ID_POWER_LED) {
-		if (brightness[EC_LED_COLOR_WHITE] != 0)
-			led_set_color_power(EC_LED_COLOR_WHITE);
-		else
-			led_set_color_power(LED_OFF);
-	}
-
-	return EC_SUCCESS;
-}
diff --git a/board/treeya/vif_override.xml b/board/treeya/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/treeya/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->