ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 487 deletions

diff --git a/board/wheelie/board.c b/board/wheelie/board.c
deleted file mode 100644
index 198dbda284..0000000000
--- a/board/wheelie/board.c
+++ /dev/null
@@ -1,487 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Wheelie board-specific configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "driver/accel_lis2dh.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/sm5803.h"
-#include "driver/sync.h"
-#include "driver/retimer/tusb544.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/it83xx_pd.h"
-#include "driver/usb_mux/it5205.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "intc.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "tcpm/tcpci.h"
-#include "temp_sensor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-
-/* C0 interrupt line shared by BC 1.2 and charger */
-static void usb_c0_interrupt(enum gpio_signal s)
-{
-	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-	sm5803_interrupt(0);
-}
-
-/* C1 interrupt line shared by BC 1.2, TCPC, and charger */
-static void usb_c1_interrupt(enum gpio_signal s)
-{
-	schedule_deferred_pd_interrupt(1);
-	task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-	sm5803_interrupt(1);
-}
-
-static void c0_ccsbu_ovp_interrupt(enum gpio_signal s)
-{
-	cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event");
-	pd_handle_cc_overvoltage(0);
-}
-
-/* Must come after other header files and interrupt handler declarations */
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_VSNS_PP3300_A] = {
-		.name = "PP3300_A_PGOOD",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH0
-	},
-	[ADC_TEMP_SENSOR_1] = {
-		.name = "TEMP_SENSOR1",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH2
-	},
-	[ADC_TEMP_SENSOR_2] = {
-		.name = "TEMP_SENSOR2",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH3
-	},
-	[ADC_SUB_ANALOG] = {
-		.name = "SUB_ANALOG",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH13
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* BC 1.2 chips */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-	{
-		.i2c_port = I2C_PORT_SUB_USB_C1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-
-/* Charger chips */
-const struct charger_config_t chg_chips[] = {
-	[CHARGER_PRIMARY] = {
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = SM5803_ADDR_CHARGER_FLAGS,
-		.drv = &sm5803_drv,
-	},
-	[CHARGER_SECONDARY] = {
-		.i2c_port = I2C_PORT_SUB_USB_C1,
-		.i2c_addr_flags = SM5803_ADDR_CHARGER_FLAGS,
-		.drv = &sm5803_drv,
-	},
-};
-
-/* TCPCs */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_EMBEDDED,
-		.drv = &it83xx_tcpm_drv,
-	},
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_SUB_USB_C1,
-			.addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS,
-		},
-		.drv = &anx7447_tcpm_drv,
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-	},
-};
-
-/* USB Retimer */
-const struct usb_mux usbc1_retimer = {
-	.usb_port = 1,
-	.i2c_port = I2C_PORT_SUB_USB_C1,
-	.i2c_addr_flags = TUSB544_I2C_ADDR_FLAGS0,
-	.driver = &tusb544_drv,
-};
-
-/* USB Muxes */
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS,
-		.driver = &it5205_usb_mux_driver,
-	},
-	{
-		.usb_port = 1,
-		.i2c_port = I2C_PORT_SUB_USB_C1,
-		.i2c_addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS,
-		.driver = &anx7447_usb_mux_driver,
-		.next_mux = &usbc1_retimer,
-	},
-};
-
-void board_init(void)
-{
-	int on;
-
-	gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C0_CCSBU_OVP_ODL);
-
-	/* Charger on the MB will be outputting PROCHOT_ODL and OD CHG_DET */
-	sm5803_configure_gpio0(CHARGER_PRIMARY, GPIO0_MODE_PROCHOT, 1);
-	sm5803_configure_chg_det_od(CHARGER_PRIMARY, 1);
-
-	/* Charger on the sub-board will be a push-pull GPIO */
-	sm5803_configure_gpio0(CHARGER_SECONDARY, GPIO0_MODE_OUTPUT, 0);
-
-	/* Turn on 5V if the system is on, otherwise turn it off */
-	on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND);
-	board_power_5v_enable(on);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_reset_pd_mcu(void)
-{
-	/*
-	 * Nothing to do.  TCPC C0 is internal, TCPC C1 reset pin is not
-	 * connected to the EC.
-	 */
-}
-
-__override void board_power_5v_enable(int enable)
-{
-	/*
-	 * Motherboard has a GPIO to turn on the 5V regulator, but the sub-board
-	 * sets it through the charger GPIO.
-	 */
-	gpio_set_level(GPIO_EN_PP5000, !!enable);
-	if (sm5803_set_gpio0_level(1, !!enable))
-		CPRINTUSB("Failed to %sable sub rails!", enable ? "en" : "dis");
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	/*
-	 * TCPC 0 is embedded in the EC and processes interrupts in the chip
-	 * code (it83xx/intc.c)
-	 */
-
-	uint16_t status = 0;
-	int regval;
-
-	/* Check whether TCPC 1 pulled the shared interrupt line */
-	if (!gpio_get_level(GPIO_USB_C1_INT_ODL)) {
-		if (!tcpc_read16(1, TCPC_REG_ALERT, &regval)) {
-			if (regval)
-				status = PD_STATUS_TCPC_ALERT_1;
-		}
-	}
-
-	return status;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma,
-			    int charge_mv)
-{
-	int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
-	/*
-	 * TODO(b/151955431): Characterize the input current limit in case a
-	 * scaling needs to be applied here
-	 */
-	charge_set_input_current_limit(icl, charge_mv);
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_valid_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT);
-	int p0_otg, p1_otg;
-
-	if (!is_valid_port && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	/* TODO(b/147440290): charger functions should take chgnum */
-	p0_otg = chg_chips[0].drv->is_sourcing_otg_power(0, 0);
-	p1_otg = chg_chips[1].drv->is_sourcing_otg_power(1, 1);
-
-	if (port == CHARGE_PORT_NONE) {
-		CPRINTUSB("Disabling all charge ports");
-
-		if (!p0_otg)
-			chg_chips[0].drv->set_mode(0,
-						   CHARGE_FLAG_INHIBIT_CHARGE);
-		if (!p1_otg)
-			chg_chips[1].drv->set_mode(1,
-						   CHARGE_FLAG_INHIBIT_CHARGE);
-
-		return EC_SUCCESS;
-	}
-
-	CPRINTUSB("New chg p%d", port);
-
-	/*
-	 * Charger task will take care of enabling charging on the new charge
-	 * port.  Here, we ensure the other port is not charging by changing
-	 * CHG_EN
-	 */
-	if (port == 0) {
-		if (p0_otg) {
-			CPRINTUSB("Skip enable p%d", port);
-			return EC_ERROR_INVAL;
-		}
-		if (!p1_otg) {
-			chg_chips[1].drv->set_mode(1,
-						   CHARGE_FLAG_INHIBIT_CHARGE);
-		}
-	} else {
-		if (p1_otg) {
-			CPRINTUSB("Skip enable p%d", port);
-			return EC_ERROR_INVAL;
-		}
-		if (!p0_otg) {
-			chg_chips[0].drv->set_mode(0,
-						   CHARGE_FLAG_INHIBIT_CHARGE);
-		}
-	}
-
-	return EC_SUCCESS;
-}
-
-/* Vconn control for integrated ITE TCPC */
-void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled)
-{
-	/* Vconn control is only for port 0 */
-	if (port)
-		return;
-
-	if (cc_pin == USBPD_CC_PIN_1)
-		gpio_set_level(GPIO_EN_USB_C0_CC1_VCONN, !!enabled);
-	else
-		gpio_set_level(GPIO_EN_USB_C0_CC2_VCONN, !!enabled);
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
-	int current;
-
-	if (port < 0 || port > CONFIG_USB_PD_PORT_MAX_COUNT)
-		return;
-
-	current = (rp == TYPEC_RP_3A0) ? 3000 : 1500;
-
-	chg_chips[port].drv->set_otg_current_voltage(port, current, 5000);
-}
-
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = {
-		.channel = 0,
-		.flags = PWM_CONFIG_DSLEEP,
-		.freq_hz = 10000,
-	},
-
-	[PWM_CH_LED_RED] = {
-		.channel = 1,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 2400,
-	},
-
-	[PWM_CH_LED_GREEN] = {
-		.channel = 2,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 2400,
-	},
-
-	[PWM_CH_LED_BLUE] = {
-		.channel = 3,
-		.flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW,
-		.freq_hz = 2400,
-	}
-
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/* Sensor Mutexes */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* Sensor Data */
-static struct stprivate_data g_lis2dh_data;
-static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;
-
-/* Drivers */
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LIS2DE,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &lis2dh_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = &g_lis2dh_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LIS2DH_ADDR1_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 2, /* g */
-		/* We only use 2g because its resolution is only 8-bits */
-		.min_frequency = LIS2DH_ODR_MIN_VAL,
-		.max_frequency = LIS2DH_ODR_MAX_VAL,
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-				MOTIONSENSE_TYPE_ACCEL),
-		.int_signal = GPIO_BASE_SIXAXIS_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 4,  /* g */
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-		.config = {
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_LSM6DSM,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
-				MOTIONSENSE_TYPE_GYRO),
-		.int_signal = GPIO_BASE_SIXAXIS_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
-		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-		.rot_standard_ref = NULL,
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	},
-	[VSYNC] = {
-		.name = "Camera VSYNC",
-		.active_mask = SENSOR_ACTIVE_S0,
-		.chip = MOTIONSENSE_CHIP_GPIO,
-		.type = MOTIONSENSE_TYPE_SYNC,
-		.location = MOTIONSENSE_LOC_CAMERA,
-		.drv = &sync_drv,
-		.default_range = 0,
-		.min_frequency = 0,
-		.max_frequency = 1,
-	},
-};
-
-const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* Thermistors */
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_1] = {.name = "Memory",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_1},
-	[TEMP_SENSOR_2] = {.name = "Ambient",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_2},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/* This callback disables keyboard when convertibles are fully open */
-__override void lid_angle_peripheral_enable(int enable)
-{
-	int chipset_in_s0 = chipset_in_state(CHIPSET_STATE_ON);
-
-	/*
-	 * If the lid is in tablet position via other sensors,
-	 * ignore the lid angle, which might be faulty then
-	 * disable keyboard.
-	 */
-	if (tablet_get_mode())
-		enable = 0;
-
-	if (enable) {
-		keyboard_scan_enable(1, KB_SCAN_DISABLE_LID_ANGLE);
-	} else {
-		/*
-		 * Ensure that the chipset is off before disabling the keyboard.
-		 * When the chipset is on, the EC keeps the keyboard enabled and
-		 * the AP decides whether to ignore input devices or not.
-		 */
-		if (!chipset_in_s0)
-			keyboard_scan_enable(0, KB_SCAN_DISABLE_LID_ANGLE);
-	}
-}