ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 152 deletions

diff --git a/chip/lm4/peci.c b/chip/lm4/peci.c
deleted file mode 100644
index b3b54a64bc..0000000000
--- a/chip/lm4/peci.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* Copyright 2012 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* PECI interface for Chrome EC */
-
-#include "chipset.h"
-#include "clock.h"
-#include "common.h"
-#include "console.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "peci.h"
-#include "registers.h"
-#include "temp_sensor.h"
-#include "util.h"
-
-/* Initial PECI baud rate */
-#define PECI_BAUD_RATE 100000
-
-/* Polling interval for PECI, in ms */
-#define PECI_POLL_INTERVAL_MS 250
-
-/*
- * Internal and external path delays, in ns.  The external delay is a
- * best-guess measurement, but we're fairly tolerant of a bad guess because
- * PECI_BAUD_RATE is slow compared to PECI's actual maximum baud rate.
- */
-#define PECI_TD_FET_NS 60
-#define PECI_TD_INT_NS 80
-
-/* Number of controller retries. Should be between 0 and 7. */
-#define PECI_RETRY_COUNT 4
-
-/* Timing negotiation error bypass. 1 = on. 0 = off. */
-#define PECI_ERROR_BYPASS 1
-
-#define TEMP_AVG_LENGTH 4  /* Should be power of 2 */
-static int temp_vals[TEMP_AVG_LENGTH];
-static int temp_idx;
-
-int peci_get_cpu_temp(void)
-{
-	int v = LM4_PECI_M0D0 & 0xffff;
-
-	if (v >= 0x8000 && v <= 0x8fff)
-		return -1;
-
-	return v >> 6;
-}
-
-int peci_temp_sensor_get_val(int idx, int *temp_ptr)
-{
-	int sum = 0;
-	int success_cnt = 0;
-	int i;
-
-	if (!chipset_in_state(CHIPSET_STATE_ON))
-		return EC_ERROR_NOT_POWERED;
-
-	for (i = 0; i < TEMP_AVG_LENGTH; ++i) {
-		if (temp_vals[i] >= 0) {
-			success_cnt++;
-			sum += temp_vals[i];
-		}
-	}
-
-	/*
-	 * Require at least two valid samples. When the AP transitions into S0,
-	 * it is possible, depending on the timing of the PECI sample, to read
-	 * an invalid temperature. This is very rare, but when it does happen
-	 * the temperature returned is CONFIG_PECI_TJMAX. Requiring two valid
-	 * samples here assures us that one bad maximum temperature reading
-	 * when entering S0 won't cause us to trigger an over temperature.
-	 */
-	if (success_cnt < 2)
-		return EC_ERROR_UNKNOWN;
-
-	*temp_ptr = sum / success_cnt;
-	return EC_SUCCESS;
-}
-
-static void peci_temp_sensor_poll(void)
-{
-	temp_vals[temp_idx] = peci_get_cpu_temp();
-	temp_idx = (temp_idx + 1) & (TEMP_AVG_LENGTH - 1);
-}
-DECLARE_HOOK(HOOK_TICK, peci_temp_sensor_poll, HOOK_PRIO_TEMP_SENSOR);
-
-static void peci_freq_changed(void)
-{
-	int freq = clock_get_freq();
-	int baud;
-
-	/* Disable polling while reconfiguring */
-	LM4_PECI_CTL = 0;
-
-	/*
-	 * Calculate baud setting from desired rate, compensating for internal
-	 * and external delays.
-	 */
-	baud = freq / (4 * PECI_BAUD_RATE) - 2;
-	baud -= (freq / 1000000) * (PECI_TD_FET_NS + PECI_TD_INT_NS) / 1000;
-
-	/* Set baud rate and polling rate */
-	LM4_PECI_DIV = (baud << 16) |
-		(PECI_POLL_INTERVAL_MS * (freq / 1000 / 4096));
-
-	/* Set up temperature monitoring to report in degrees K */
-	LM4_PECI_CTL = ((CONFIG_PECI_TJMAX + 273) << 22) | 0x0001 |
-		       (PECI_RETRY_COUNT << 12) |
-		       (PECI_ERROR_BYPASS << 11);
-}
-DECLARE_HOOK(HOOK_FREQ_CHANGE, peci_freq_changed, HOOK_PRIO_DEFAULT);
-
-static void peci_init(void)
-{
-	int i;
-
-	/* Enable the PECI module in run and sleep modes. */
-	clock_enable_peripheral(CGC_OFFSET_PECI, 0x1,
-			CGC_MODE_RUN | CGC_MODE_SLEEP);
-
-	/* Configure GPIOs */
-	gpio_config_module(MODULE_PECI, 1);
-
-	/* Set initial clock frequency */
-	peci_freq_changed();
-
-	/* Initialize temperature reading buffer to a valid value. */
-	for (i = 0; i < TEMP_AVG_LENGTH; ++i)
-		temp_vals[i] = 300; /* 27 C */
-}
-DECLARE_HOOK(HOOK_INIT, peci_init, HOOK_PRIO_DEFAULT);
-
-/*****************************************************************************/
-/* Console commands */
-
-static int command_peci_temp(int argc, char **argv)
-{
-	int t = peci_get_cpu_temp();
-	if (t == -1) {
-		ccprintf("PECI error 0x%04x\n", LM4_PECI_M0D0 & 0xffff);
-		return EC_ERROR_UNKNOWN;
-	}
-	ccprintf("CPU temp = %d K = %d C\n", t, K_TO_C(t));
-	return EC_SUCCESS;
-}
-DECLARE_CONSOLE_COMMAND(pecitemp, command_peci_temp,
-			NULL,
-			"Print CPU temperature");