ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 179 deletions

diff --git a/chip/lm4/spi.c b/chip/lm4/spi.c
deleted file mode 100644
index 629e306af7..0000000000
--- a/chip/lm4/spi.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/* Copyright 2013 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* SPI module for Chrome EC */
-
-#include "console.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "registers.h"
-#include "spi.h"
-#include "task.h"
-#include "timer.h"
-#include "util.h"
-
-/* Console output macros */
-#define CPUTS(outstr) cputs(CC_SPI, outstr)
-#define CPRINTS(format, args...) cprints(CC_SPI, format, ## args)
-
-int spi_enable(const struct spi_device_t *spi_device, int enable)
-{
-	if (enable) {
-		gpio_config_module(MODULE_SPI, 1);
-		/*
-		 * Don't use the SSI0 frame output.
-		 * CS# is a GPIO so we can keep it low during an entire
-		 * transaction.
-		 */
-		gpio_set_flags(spi_device->gpio_cs, GPIO_OUTPUT);
-		gpio_set_level(spi_device->gpio_cs, 1);
-
-		/* Enable SSI port */
-		LM4_SSI_CR1(0) |= 0x02;
-	} else {
-		/* Disable SSI port */
-		LM4_SSI_CR1(0) &= ~0x02;
-
-		/* Make sure CS# is deselected */
-		gpio_set_level(spi_device->gpio_cs, 1);
-		gpio_set_flags(spi_device->gpio_cs[i], GPIO_ODR_HIGH);
-
-		gpio_config_module(MODULE_SPI, 0);
-	}
-
-	return EC_SUCCESS;
-}
-
-
-int spi_transaction(const struct spi_device_t *spi_device,
-		    const uint8_t *txdata, int txlen,
-		    uint8_t *rxdata, int rxlen)
-{
-	int totallen = txlen + rxlen;
-	int txcount = 0, rxcount = 0;
-	static struct mutex spi_mutex;
-	volatile uint32_t unused  __attribute__((unused));
-
-	mutex_lock(&spi_mutex);
-	/* Empty the receive FIFO */
-	while (LM4_SSI_SR(0) & LM4_SSI_SR_RNE)
-		unused = LM4_SSI_DR(0);
-
-	/* Start transaction.  Need to do this explicitly because the LM4
-	 * SSI controller pulses its frame select every byte, and the EEPROM
-	 * wants the chip select held low during the entire transaction. */
-	gpio_set_level(spi_device->gpio_cs, 0);
-
-	while (rxcount < totallen) {
-		/* Handle received bytes if any.  We just checked rxcount <
-		 * totallen, so we don't need to worry about overflowing the
-		 * receive buffer. */
-		if (LM4_SSI_SR(0) & LM4_SSI_SR_RNE) {
-			if (rxcount < txlen) {
-				/* Throw away bytes received while we were
-				   transmitting */
-				unused = LM4_SSI_DR(0);
-			} else
-				*(rxdata++) = LM4_SSI_DR(0);
-			rxcount++;
-		}
-
-		/* Transmit another byte if needed */
-		if ((LM4_SSI_SR(0) & LM4_SSI_SR_TNF) && txcount < totallen) {
-			if (txcount < txlen)
-				LM4_SSI_DR(0) = *(txdata++);
-			else {
-				/* Clock out unused byte so we can clock in the
-				 * response byte */
-				LM4_SSI_DR(0) = 0;
-			}
-			txcount++;
-		}
-	}
-
-	/* End transaction */
-	gpio_set_level(spi_device->gpio_cs, 1);
-	mutex_unlock(&spi_mutex);
-
-	return EC_SUCCESS;
-}
-
-/*****************************************************************************/
-/* Hooks */
-
-static int spi_init(void)
-{
-	/* Enable the SPI module in run and sleep modes */
-	clock_enable_peripheral(CGC_OFFSET_SSI, 0x1,
-			CGC_MODE_RUN | CGC_MODE_SLEEP);
-
-	LM4_SSI_CR1(0) = 0;       /* Disable SSI */
-	LM4_SSI_CR0(0) = 0x0007;  /* SCR=0, SPH=0, SPO=0, FRF=SPI, 8-bit */
-
-	/* Use PIOSC for clock.  This limits us to 8MHz (PIOSC/2), but is
-	 * simpler to configure and we don't need to worry about clock
-	 * frequency changing when the PLL is disabled.  If we really start
-	 * using this, might be worth using the system clock and handling
-	 * frequency change (like we do with PECI) so we can go faster. */
-	LM4_SSI_CC(0) = 1;
-	/* SSICLK = PIOSC / (CPSDVSR * (1 + SCR)
-	 *        = 16 MHz / (2 * (1 + 0))
-	 *        = 8 MHz */
-	LM4_SSI_CPSR(0) = 2;
-
-	/* Ensure the SPI port is disabled.  This keeps us from interfering
-	 * with the main chipset when we're not explicitly using the SPI
-	 * bus. */
-	spi_enable(SPI_FLASH_DEVICE, 0);
-
-	return EC_SUCCESS;
-}
-DECLARE_HOOK(HOOK_INIT, spi_init, HOOK_PRIO_INIT_SPI);
-
-/*****************************************************************************/
-/* Console commands */
-
-static int printrx(const char *desc, const uint8_t *txdata, int txlen,
-		   int rxlen)
-{
-	uint8_t rxdata[32];
-	int rv;
-	int i;
-
-	rv = spi_transaction(SPI_FLASH_DEVICE, txdata, txlen, rxdata, rxlen);
-	if (rv)
-		return rv;
-
-	ccprintf("%-12s:", desc);
-	for (i = 0; i < rxlen; i++)
-		ccprintf(" 0x%02x", rxdata[i]);
-	ccputs("\n");
-	return EC_SUCCESS;
-}
-
-
-static int command_spirom(int argc, char **argv)
-{
-	uint8_t txmandev[] = {0x90, 0x00, 0x00, 0x00};
-	uint8_t txjedec[] = {0x9f};
-	uint8_t txunique[] = {0x4b, 0x00, 0x00, 0x00, 0x00};
-	uint8_t txsr1[] = {0x05};
-	uint8_t txsr2[] = {0x35};
-
-	spi_enable(SPI_FLASH_DEVICE, 1);
-
-	printrx("Man/Dev ID", txmandev, sizeof(txmandev), 2);
-	printrx("JEDEC ID", txjedec, sizeof(txjedec), 3);
-	printrx("Unique ID", txunique, sizeof(txunique), 8);
-	printrx("Status reg 1", txsr1, sizeof(txsr1), 1);
-	printrx("Status reg 2", txsr2, sizeof(txsr2), 1);
-
-	spi_enable(SPI_FLASH_DEVICE, 0);
-
-	return EC_SUCCESS;
-}
-DECLARE_CONSOLE_COMMAND(spirom, command_spirom,
-			NULL,
-			"Test reading SPI EEPROM");