ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 220 deletions

diff --git a/chip/mec1322/uart.c b/chip/mec1322/uart.c
deleted file mode 100644
index 2c607d0b72..0000000000
--- a/chip/mec1322/uart.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/* Copyright 2013 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* UART module for MEC1322 */
-
-#include "clock.h"
-#include "common.h"
-#include "console.h"
-#include "gpio.h"
-#include "lpc.h"
-#include "registers.h"
-#include "system.h"
-#include "task.h"
-#include "uart.h"
-#include "util.h"
-
-#define TX_FIFO_SIZE 16
-
-static int init_done;
-static int tx_fifo_used;
-
-int uart_init_done(void)
-{
-	return init_done;
-}
-
-void uart_tx_start(void)
-{
-	/* If interrupt is already enabled, nothing to do */
-	if (MEC1322_UART_IER & BIT(1))
-		return;
-
-	/* Do not allow deep sleep while transmit in progress */
-	disable_sleep(SLEEP_MASK_UART);
-
-	/*
-	 * Re-enable the transmit interrupt, then forcibly trigger the
-	 * interrupt.  This works around a hardware problem with the
-	 * UART where the FIFO only triggers the interrupt when its
-	 * threshold is _crossed_, not just met.
-	 */
-	MEC1322_UART_IER |= BIT(1);
-	task_trigger_irq(MEC1322_IRQ_UART);
-}
-
-void uart_tx_stop(void)
-{
-	MEC1322_UART_IER &= ~BIT(1);
-
-	/* Re-allow deep sleep */
-	enable_sleep(SLEEP_MASK_UART);
-}
-
-void uart_tx_flush(void)
-{
-	/* Wait for transmit FIFO empty */
-	while (!(MEC1322_UART_LSR & MEC1322_LSR_TX_EMPTY))
-		;
-}
-
-int uart_tx_ready(void)
-{
-	/*
-	 * We have no indication of free space in transmit FIFO. To work around
-	 * this, we check transmit FIFO empty bit every 16 characters written.
-	 */
-	return tx_fifo_used != 0 || (MEC1322_UART_LSR & MEC1322_LSR_TX_EMPTY);
-}
-
-int uart_tx_in_progress(void)
-{
-	/* return 0: FIFO is empty, 1: FIFO NOT Empty */
-	return !(MEC1322_UART_LSR & MEC1322_LSR_TX_EMPTY);
-}
-
-int uart_rx_available(void)
-{
-	return MEC1322_UART_LSR & BIT(0);
-}
-
-void uart_write_char(char c)
-{
-	/* Wait for space in transmit FIFO. */
-	while (!uart_tx_ready())
-		;
-
-	tx_fifo_used = (tx_fifo_used + 1) % TX_FIFO_SIZE;
-	MEC1322_UART_TB = c;
-}
-
-int uart_read_char(void)
-{
-	return MEC1322_UART_RB;
-}
-
-static void uart_clear_rx_fifo(int channel)
-{
-	MEC1322_UART_FCR = BIT(0) | BIT(1);
-}
-
-/**
- * Interrupt handler for UART
- */
-void uart_ec_interrupt(void)
-{
-	/* Read input FIFO until empty, then fill output FIFO */
-	uart_process_input();
-	uart_process_output();
-}
-DECLARE_IRQ(MEC1322_IRQ_UART, uart_ec_interrupt, 1);
-
-void uart_init(void)
-{
-	/* Set UART to reset on VCC1_RESET instaed of nSIO_RESET */
-	MEC1322_UART_CFG &= ~BIT(1);
-
-	/* Baud rate = 115200. 1.8432MHz clock. Divisor = 1 */
-
-	/* Set CLK_SRC = 0 */
-	MEC1322_UART_CFG &= ~BIT(0);
-
-	/* Set DLAB = 1 */
-	MEC1322_UART_LCR |= BIT(7);
-
-	/* PBRG0/PBRG1 */
-	MEC1322_UART_PBRG0 = 1;
-	MEC1322_UART_PBRG1 = 0;
-
-	/* Set DLAB = 0 */
-	MEC1322_UART_LCR &= ~BIT(7);
-
-	/* Set word length to 8-bit */
-	MEC1322_UART_LCR |= BIT(0) | BIT(1);
-
-	/* Enable FIFO */
-	MEC1322_UART_FCR = BIT(0);
-
-	/* Activate UART */
-	MEC1322_UART_ACT |= BIT(0);
-
-	/*
-	clock_enable_peripheral(CGC_OFFSET_UART, mask,
-			CGC_MODE_RUN | CGC_MODE_SLEEP);*/
-
-	gpio_config_module(MODULE_UART, 1);
-
-	/*
-	 * Enable interrupts for UART0.
-	 */
-	uart_clear_rx_fifo(0);
-	MEC1322_UART_IER |= BIT(0);
-	MEC1322_UART_MCR |= BIT(3);
-	MEC1322_INT_ENABLE(15) |= BIT(0);
-	MEC1322_INT_BLK_EN |= BIT(15);
-	task_enable_irq(MEC1322_IRQ_UART);
-
-	init_done = 1;
-}
-
-#ifdef CONFIG_LOW_POWER_IDLE
-void uart_enter_dsleep(void)
-{
-	/* Disable the UART interrupt. */
-	task_disable_irq(MEC1322_IRQ_UART);  /* NVIC interrupt for UART=13 */
-
-	/*
-	 * Set the UART0 RX pin to be a GPIO-162(fixed pin) interrupt
-	 * with the flags defined in the gpio.inc file.
-	 */
-	gpio_reset(GPIO_UART0_RX);
-
-	/* power-down/de-activate UART0 */
-	MEC1322_UART_ACT &= ~BIT(0);
-
-	/* Clear pending interrupts on GPIO_UART0_RX(GPIO162, girq=8, bit=18) */
-	MEC1322_INT_SOURCE(8) = (1<<18);
-
-	/* Enable GPIO interrupts on the UART0 RX pin. */
-	gpio_enable_interrupt(GPIO_UART0_RX);
-}
-
-
-void uart_exit_dsleep(void)
-{
-	/*
-	 * If the UART0 RX GPIO interrupt has not fired, then no edge has been
-	 * detected. Disable the GPIO interrupt so that switching the pin over
-	 * to a UART pin doesn't inadvertently cause a GPIO edge interrupt.
-	 * Note: we can't disable this interrupt if it has already fired
-	 * because then the IRQ will not run at all.
-	 */
-	if (!(BIT(18) & MEC1322_INT_SOURCE(8))) /* if edge interrupt */
-		gpio_disable_interrupt(GPIO_UART0_RX);
-
-	/* Configure UART0 pins for use in UART peripheral. */
-	gpio_config_module(MODULE_UART, 1);
-
-	/* Clear pending interrupts on UART peripheral and enable interrupts. */
-	uart_clear_rx_fifo(0);
-	task_enable_irq(MEC1322_IRQ_UART); /* NVIC interrupt for UART = 13 */
-
-	/* power-up/activate UART0 */
-	MEC1322_UART_ACT |= BIT(0);
-}
-
-void uart_deepsleep_interrupt(enum gpio_signal signal)
-{
-	/*
-	 * Activity seen on UART RX pin while UART was disabled for deep sleep.
-	 * The console won't see that character because the UART is disabled,
-	 * so we need to inform the clock module of UART activity ourselves.
-	 */
-	clock_refresh_console_in_use();
-
-	/* Disable interrupts on UART0 RX pin to avoid repeated interrupts. */
-	gpio_disable_interrupt(GPIO_UART0_RX);
-}
-#endif /* CONFIG_LOW_POWER_IDLE */