diff options
| -rw-r--r--[l---------] | board/flapjack/usb_pd_policy.c | 409 |
1 files changed, 408 insertions, 1 deletions
diff --git a/board/flapjack/usb_pd_policy.c b/board/flapjack/usb_pd_policy.c index bcb9116de7..42b0ce7e03 120000..100644 --- a/board/flapjack/usb_pd_policy.c +++ b/board/flapjack/usb_pd_policy.c @@ -1 +1,408 @@ -../kukui/usb_pd_policy.c
\ No newline at end of file +/* Copyright 2018 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include "atomic.h" +#include "charger.h" +#include "charge_manager.h" +#include "common.h" +#include "console.h" +#include "driver/charger/rt946x.h" +#include "gpio.h" +#include "hooks.h" +#include "host_command.h" +#include "registers.h" +#include "system.h" +#include "task.h" +#include "timer.h" +#include "util.h" +#include "usb_mux.h" +#include "usb_pd.h" +#include "usb_pd_tcpm.h" + +#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) + +#define PDO_FIXED_FLAGS (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |\ + PDO_FIXED_COMM_CAP) + +const uint32_t pd_src_pdo[] = { + PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS), +}; +const int pd_src_pdo_cnt = ARRAY_SIZE(pd_src_pdo); + +const uint32_t pd_snk_pdo[] = { + PDO_FIXED(5000, 500, PDO_FIXED_FLAGS), + PDO_BATT(4750, + (int)(PD_MAX_VOLTAGE_MV * 1.05), + PD_OPERATING_POWER_MW), + PDO_VAR(4750, + (int)(PD_MAX_VOLTAGE_MV * 1.05), + PD_MAX_CURRENT_MA), +}; +const int pd_snk_pdo_cnt = ARRAY_SIZE(pd_snk_pdo); + +int pd_is_valid_input_voltage(int mv) +{ + return 1; +} + +void pd_transition_voltage(int idx) +{ + /* No-operation: we are always 5V */ +} + +static uint8_t vbus_en; + +int board_vbus_source_enabled(int port) +{ + return vbus_en; +} + +int pd_set_power_supply_ready(int port) +{ + + pd_set_vbus_discharge(port, 0); + /* Provide VBUS */ + vbus_en = 1; + charger_enable_otg_power(1); + + /* notify host of power info change */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); + + return EC_SUCCESS; /* we are ready */ +} + +void pd_power_supply_reset(int port) +{ + int prev_en; + + prev_en = vbus_en; + /* Disable VBUS */ + vbus_en = 0; + charger_enable_otg_power(0); + /* Enable discharge if we were previously sourcing 5V */ + if (prev_en) + pd_set_vbus_discharge(port, 1); + + /* notify host of power info change */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); +} + +void typec_set_source_current_limit(int port, int rp) +{ + /* No-operation */ +} + +int pd_board_checks(void) +{ + return EC_SUCCESS; +} + +int pd_check_power_swap(int port) +{ + /* + * Allow power swap as long as we are acting as a dual role device, + * otherwise assume our role is fixed (not in S0 or console command + * to fix our role). + */ + return pd_get_dual_role(port) == PD_DRP_TOGGLE_ON ? 1 : 0; +} + +int pd_check_data_swap(int port, int data_role) +{ + /* Allow data swap if we are a UFP, otherwise don't allow */ + return (data_role == PD_ROLE_UFP) ? 1 : 0; +} + +int pd_check_vconn_swap(int port) +{ + /* + * VCONN is provided directly by the battery (PPVAR_SYS) + * but use the same rules as power swap. + */ + return pd_get_dual_role(port) == PD_DRP_TOGGLE_ON ? 1 : 0; +} + +void pd_execute_data_swap(int port, int data_role) +{ + /* Do nothing */ +} + +void pd_check_pr_role(int port, int pr_role, int flags) +{ + /* + * If partner is dual-role power and dualrole toggling is on, consider + * if a power swap is necessary. + */ + if ((flags & PD_FLAGS_PARTNER_DR_POWER) && + pd_get_dual_role(port) == PD_DRP_TOGGLE_ON) { + /* + * If we are a sink and partner is not externally powered, then + * swap to become a source. If we are source and partner is + * externally powered, swap to become a sink. + */ + int partner_extpower = flags & PD_FLAGS_PARTNER_EXTPOWER; + + if ((!partner_extpower && pr_role == PD_ROLE_SINK) || + (partner_extpower && pr_role == PD_ROLE_SOURCE)) + pd_request_power_swap(port); + } +} + +void pd_check_dr_role(int port, int dr_role, int flags) +{ + /* If UFP, try to switch to DFP */ + if ((flags & PD_FLAGS_PARTNER_DR_DATA) && dr_role == PD_ROLE_UFP) + pd_request_data_swap(port); +} +/* ----------------- Vendor Defined Messages ------------------ */ +const struct svdm_response svdm_rsp = { + .identity = NULL, + .svids = NULL, + .modes = NULL, +}; + +int pd_custom_vdm(int port, int cnt, uint32_t *payload, + uint32_t **rpayload) +{ + int cmd = PD_VDO_CMD(payload[0]); + uint16_t dev_id = 0; + int is_rw; + + /* make sure we have some payload */ + if (cnt == 0) + return 0; + + switch (cmd) { + case VDO_CMD_VERSION: + /* guarantee last byte of payload is null character */ + *(payload + cnt - 1) = 0; + CPRINTF("version: %s\n", (char *)(payload+1)); + break; + case VDO_CMD_READ_INFO: + case VDO_CMD_SEND_INFO: + /* copy hash */ + if (cnt == 7) { + dev_id = VDO_INFO_HW_DEV_ID(payload[6]); + is_rw = VDO_INFO_IS_RW(payload[6]); + + CPRINTF("DevId:%d.%d SW:%d RW:%d\n", + HW_DEV_ID_MAJ(dev_id), + HW_DEV_ID_MIN(dev_id), + VDO_INFO_SW_DBG_VER(payload[6]), + is_rw); + } else if (cnt == 6) { + /* really old devices don't have last byte */ + pd_dev_store_rw_hash(port, dev_id, payload + 1, + SYSTEM_IMAGE_UNKNOWN); + } + break; + case VDO_CMD_CURRENT: + CPRINTF("Current: %dmA\n", payload[1]); + break; + case VDO_CMD_FLIP: + usb_mux_flip(port); + break; +#ifdef CONFIG_USB_PD_LOGGING + case VDO_CMD_GET_LOG: + pd_log_recv_vdm(port, cnt, payload); + break; +#endif /* CONFIG_USB_PD_LOGGING */ + } + + return 0; +} + +#ifdef CONFIG_USB_PD_ALT_MODE_DFP +static int dp_flags[CONFIG_USB_PD_PORT_COUNT]; +/* DP Status VDM as returned by UFP */ +static uint32_t dp_status[CONFIG_USB_PD_PORT_COUNT]; + +static void svdm_safe_dp_mode(int port) +{ + /* make DP interface safe until configure */ + dp_flags[port] = 0; + dp_status[port] = 0; + usb_mux_set(port, TYPEC_MUX_NONE, + USB_SWITCH_CONNECT, pd_get_polarity(port)); +} + +static int svdm_enter_dp_mode(int port, uint32_t mode_caps) +{ + /* Only enter mode if device is DFP_D capable */ + if (mode_caps & MODE_DP_SNK) { + svdm_safe_dp_mode(port); + return 0; + } + + return -1; +} + +static int svdm_dp_status(int port, uint32_t *payload) +{ + int opos = pd_alt_mode(port, USB_SID_DISPLAYPORT); + + payload[0] = VDO(USB_SID_DISPLAYPORT, 1, + CMD_DP_STATUS | VDO_OPOS(opos)); + payload[1] = VDO_DP_STATUS(0, /* HPD IRQ ... not applicable */ + 0, /* HPD level ... not applicable */ + 0, /* exit DP? ... no */ + 0, /* usb mode? ... no */ + 0, /* multi-function ... no */ + (!!(dp_flags[port] & DP_FLAGS_DP_ON)), + 0, /* power low? ... no */ + (!!(dp_flags[port] & DP_FLAGS_DP_ON))); + return 2; +}; + +static int svdm_dp_config(int port, uint32_t *payload) +{ + int opos = pd_alt_mode(port, USB_SID_DISPLAYPORT); + int pin_mode = pd_dfp_dp_get_pin_mode(port, dp_status[port]); + + if (!pin_mode) + return 0; + + payload[0] = VDO(USB_SID_DISPLAYPORT, 1, + CMD_DP_CONFIG | VDO_OPOS(opos)); + payload[1] = VDO_DP_CFG(pin_mode, /* pin mode */ + 1, /* DPv1.3 signaling */ + 2); /* UFP connected */ + return 2; +}; + +/* + * timestamp of the next possible toggle to ensure the 2-ms spacing + * between IRQ_HPD. + */ +static uint64_t hpd_deadline[CONFIG_USB_PD_PORT_COUNT]; + +static void svdm_dp_post_config(int port) +{ + const struct usb_mux * const mux = &usb_muxes[port]; + + dp_flags[port] |= DP_FLAGS_DP_ON; + if (!(dp_flags[port] & DP_FLAGS_HPD_HI_PENDING)) + return; + + gpio_set_level(GPIO_USB_C0_HPD_OD, 1); + gpio_set_level(GPIO_USB_C0_DP_OE_L, 0); + gpio_set_level(GPIO_USB_C0_DP_POLARITY, pd_get_polarity(port)); + + /* set the minimum time delay (2ms) for the next HPD IRQ */ + hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; + mux->hpd_update(port, 1, 0); +} + +static int svdm_dp_attention(int port, uint32_t *payload) +{ + int cur_lvl = gpio_get_level(GPIO_USB_C0_HPD_OD); + int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); + int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); + const struct usb_mux * const mux = &usb_muxes[port]; + + dp_status[port] = payload[1]; + + /* Its initial DP status message prior to config */ + if (!(dp_flags[port] & DP_FLAGS_DP_ON)) { + if (lvl) + dp_flags[port] |= DP_FLAGS_HPD_HI_PENDING; + return 1; + } + + if (irq & cur_lvl) { + uint64_t now = get_time().val; + /* wait for the minimum spacing between IRQ_HPD if needed */ + if (now < hpd_deadline[port]) + usleep(hpd_deadline[port] - now); + + /* generate IRQ_HPD pulse */ + gpio_set_level(GPIO_USB_C0_HPD_OD, 0); + usleep(HPD_DSTREAM_DEBOUNCE_IRQ); + gpio_set_level(GPIO_USB_C0_HPD_OD, 1); + + gpio_set_level(GPIO_USB_C0_DP_OE_L, 0); + gpio_set_level(GPIO_USB_C0_DP_POLARITY, pd_get_polarity(port)); + + /* set the minimum time delay (2ms) for the next HPD IRQ */ + hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; + } else if (irq & !cur_lvl) { + CPRINTF("ERR:HPD:IRQ&LOW\n"); + return 0; /* nak */ + } else { + gpio_set_level(GPIO_USB_C0_HPD_OD, lvl); + gpio_set_level(GPIO_USB_C0_DP_OE_L, !lvl); + gpio_set_level(GPIO_USB_C0_DP_POLARITY, pd_get_polarity(port)); + /* set the minimum time delay (2ms) for the next HPD IRQ */ + hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; + } + + mux->hpd_update(port, lvl, irq); + /* ack */ + return 1; +} + +static void svdm_exit_dp_mode(int port) +{ + const struct usb_mux * const mux = &usb_muxes[port]; + + svdm_safe_dp_mode(port); + gpio_set_level(GPIO_USB_C0_HPD_OD, 0); + gpio_set_level(GPIO_USB_C0_DP_OE_L, 1); + mux->hpd_update(port, 0, 0); +} + +static int svdm_enter_gfu_mode(int port, uint32_t mode_caps) +{ + /* Always enter GFU mode */ + return 0; +} + +static void svdm_exit_gfu_mode(int port) +{ +} + +static int svdm_gfu_status(int port, uint32_t *payload) +{ + /* + * This is called after enter mode is successful, send unstructured + * VDM to read info. + */ + pd_send_vdm(port, USB_VID_GOOGLE, VDO_CMD_READ_INFO, NULL, 0); + return 0; +} + +static int svdm_gfu_config(int port, uint32_t *payload) +{ + return 0; +} + +static int svdm_gfu_attention(int port, uint32_t *payload) +{ + return 0; +} + +const struct svdm_amode_fx supported_modes[] = { + { + .svid = USB_SID_DISPLAYPORT, + .enter = &svdm_enter_dp_mode, + .status = &svdm_dp_status, + .config = &svdm_dp_config, + .post_config = &svdm_dp_post_config, + .attention = &svdm_dp_attention, + .exit = &svdm_exit_dp_mode, + }, + { + .svid = USB_VID_GOOGLE, + .enter = &svdm_enter_gfu_mode, + .status = &svdm_gfu_status, + .config = &svdm_gfu_config, + .attention = &svdm_gfu_attention, + .exit = &svdm_exit_gfu_mode, + } +}; +const int supported_modes_cnt = ARRAY_SIZE(supported_modes); +#endif /* CONFIG_USB_PD_ALT_MODE_DFP */ + |