diff options
Diffstat (limited to 'baseboard/brya/baseboard.h')
| -rw-r--r-- | baseboard/brya/baseboard.h | 43 |
1 files changed, 21 insertions, 22 deletions
diff --git a/baseboard/brya/baseboard.h b/baseboard/brya/baseboard.h index bc44a9d642..84fefa9b53 100644 --- a/baseboard/brya/baseboard.h +++ b/baseboard/brya/baseboard.h @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -12,18 +12,18 @@ * By default, enable all console messages excepted HC, ACPI and event: * The sensor stack is generating a lot of activity. */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) +#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) #undef CONFIG_HOSTCMD_DEBUG_MODE #define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF /* NPCX9 config */ -#define NPCX9_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ +#define NPCX9_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ /* * This defines which pads (GPIO10/11 or GPIO64/65) are connected to * the "UART1" (NPCX_UART_PORT0) controller when used for * CONSOLE_UART. */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 for UART1 */ +#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 for UART1 */ /* EC Defines */ #define CONFIG_LTO @@ -46,8 +46,8 @@ /* Host communication */ #define CONFIG_HOST_INTERFACE_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S5 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S4 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S5 /* * TODO(b/179648721): implement sensors @@ -68,7 +68,7 @@ #define CONFIG_CHARGE_MANAGER #define CONFIG_CHARGER #define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 +#define CONFIG_CHARGER_INPUT_CURRENT 512 #define CONFIG_CMD_CHARGER_DUMP @@ -79,8 +79,8 @@ * Don't allow the system to boot to S0 when the battery is low and unable to * communicate on locked systems (which haven't PD negotiated) */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 15001 +#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 +#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 15001 /* Common battery defines */ #define CONFIG_BATTERY_SMART @@ -113,7 +113,7 @@ #define CONFIG_POWER_TRACK_HOST_SLEEP_STATE #define CONFIG_LOW_POWER_IDLE -#define CONFIG_HOSTCMD_ESPI_RESET_SLP_SX_VW_ON_ESPI_RST +#define CONFIG_HOST_INTERFACE_ESPI_RESET_SLP_SX_VW_ON_ESPI_RST #define CONFIG_BOARD_HAS_RTC_RESET #undef CONFIG_S5_EXIT_WAIT @@ -124,8 +124,8 @@ /* ADL has new lower-power features that require extra-wide virtual wire * pulses. The EDS specifies 100 microseconds. */ -#undef CONFIG_ESPI_DEFAULT_VW_WIDTH_US -#define CONFIG_ESPI_DEFAULT_VW_WIDTH_US 100 +#undef CONFIG_HOST_INTERFACE_ESPI_DEFAULT_VW_WIDTH_US +#define CONFIG_HOST_INTERFACE_ESPI_DEFAULT_VW_WIDTH_US 100 /* Buttons / Switches */ #define CONFIG_VOLUME_BUTTONS @@ -181,7 +181,7 @@ #define CONFIG_USB_PD_TCPM_NCT38XX #define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_HOSTCMD_PD_CONTROL /* Needed for TCPC FW update */ +#define CONFIG_HOSTCMD_PD_CONTROL /* Needed for TCPC FW update */ #define CONFIG_CMD_USB_PD_PE /* @@ -189,7 +189,7 @@ * with non-PD chargers. Override the default low-power mode exit delay. */ #undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE -#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (50*MSEC) +#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (50 * MSEC) /* Enable USB3.2 DRD */ #define CONFIG_USB_PD_USB32_DRD @@ -230,13 +230,13 @@ * bytes. Task stack sizes not listed here use more generic values (see * ec.tasklist). */ -#define BASEBOARD_CHARGER_TASK_STACK_SIZE 1088 -#define BASEBOARD_CHG_RAMP_TASK_STACK_SIZE 1088 -#define BASEBOARD_CHIPSET_TASK_STACK_SIZE 1152 -#define BASEBOARD_PD_INT_TASK_STACK_SIZE 800 -#define BASEBOARD_PD_TASK_STACK_SIZE 1216 -#define BASEBOARD_POWERBTN_TASK_STACK_SIZE 1088 -#define BASEBOARD_RGBKBD_TASK_STACK_SIZE 2048 +#define BASEBOARD_CHARGER_TASK_STACK_SIZE 1088 +#define BASEBOARD_CHG_RAMP_TASK_STACK_SIZE 1088 +#define BASEBOARD_CHIPSET_TASK_STACK_SIZE 1152 +#define BASEBOARD_PD_INT_TASK_STACK_SIZE 800 +#define BASEBOARD_PD_TASK_STACK_SIZE 1216 +#define BASEBOARD_POWERBTN_TASK_STACK_SIZE 1088 +#define BASEBOARD_RGBKBD_TASK_STACK_SIZE 2048 #ifndef __ASSEMBLER__ @@ -248,7 +248,6 @@ #include "baseboard_usbc_config.h" #include "extpower.h" - /* * Check battery disconnect state. * This function will return if battery is initialized or not. |