1 files changed, 0 insertions, 92 deletions
diff --git a/baseboard/guybrush/usb_pd_policy.c b/baseboard/guybrush/usb_pd_policy.c
deleted file mode 100644
index 79725e827a..0000000000
--- a/baseboard/guybrush/usb_pd_policy.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Shared USB-C policy for Zork boards */
-
-#include "charge_manager.h"
-#include "chipset.h"
-#include "common.h"
-#include "compile_time_macros.h"
-#include "console.h"
-#include "ec_commands.h"
-#include "gpio.h"
-#include "ioexpander.h"
-#include "system.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-int pd_check_vconn_swap(int port)
-{
-	/*
-	 * Do not allow vconn swap 5V rail is off
-	 * S5_PGOOD depends on PG_PP5000_S5 being asserted,
-	 * so GPIO_S5_PGOOD is a reasonable proxy for PP5000_S5
-	 */
-	return gpio_get_level(GPIO_S5_PGOOD);
-}
-
-void pd_power_supply_reset(int port)
-{
-	/* Disable VBUS. */
-	ppc_vbus_source_enable(port, 0);
-
-	/* Enable discharge if we were previously sourcing 5V */
-	if (IS_ENABLED(CONFIG_USB_PD_DISCHARGE))
-		pd_set_vbus_discharge(port, 1);
-
-	/* Notify host of power info change. */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-}
-
-int pd_set_power_supply_ready(int port)
-{
-	int rv;
-
-	/* Disable charging. */
-	rv = ppc_vbus_sink_enable(port, 0);
-	if (rv)
-		return rv;
-
-	if (IS_ENABLED(CONFIG_USB_PD_DISCHARGE))
-		pd_set_vbus_discharge(port, 0);
-
-	/* Provide Vbus. */
-	rv = ppc_vbus_source_enable(port, 1);
-	if (rv)
-		return rv;
-
-	/* Notify host of power info change. */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-
-	return EC_SUCCESS;
-}
-
-__override int board_pd_set_frs_enable(int port, int enable)
-{
-	/*
-	 * Both PPCs require the FRS GPIO to be set as soon as FRS capability
-	 * is established.
-	 */
-	if (port == 0)
-		ioex_set_level(IOEX_USB_C0_TCPC_FASTSW_CTL_EN, enable);
-	else if (port == 1)
-		ioex_set_level(IOEX_USB_C1_TCPC_FASTSW_CTL_EN, enable);
-
-	return EC_SUCCESS;
-}
-
-/* Used by Vbus discharge common code with CONFIG_USB_PD_DISCHARGE */
-int board_vbus_source_enabled(int port)
-{
-	return tcpm_get_src_ctrl(port);
-}
-
-/* Used by USB charger task with CONFIG_USB_PD_5V_EN_CUSTOM */
-int board_is_sourcing_vbus(int port)
-{
-	return board_vbus_source_enabled(port);
-}