diff options
Diffstat (limited to 'baseboard/intelrvp/README.md')
| -rw-r--r-- | baseboard/intelrvp/README.md | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/baseboard/intelrvp/README.md b/baseboard/intelrvp/README.md deleted file mode 100644 index 39286e130d..0000000000 --- a/baseboard/intelrvp/README.md +++ /dev/null @@ -1,53 +0,0 @@ -This folder is for the baseboard for the board specific files which use Intel -Reference Validation Platform (RVP) for developing the EC and other peripherals -which can be hooked on EC or RVP. - -This baseboard follows the Intel Modular Embedded Controller Card (MECC) -specification for pinout and these pin definitions remain same on all the RVPs. -Chrome MECC spec is standardized for Icelake and successor RVPs hence this -baseboard code is applicable to Icelake and its successors only. - -Following hardware features are supported on MECC header by RVP and can be -validated by software by MECC. - -## MECC version 0.9 features - -1. Power to MECC is provided by RVP (battery + DC Jack + Type C) -2. Power control pins for Intel SOC are added -3. Servo V2 header need to be added by MECC -4. Google H1 chip need to be added by MECC (optional for EC vendors) -5. 2 Type-C port support (SRC/SNK/BC1.2/MUX/Rerimer) -6. 6 Temperature sensors -7. 4 ADC -8. 4 I2C Channels -9. 1 Fan control - -## MECC version 1.0 features - -1. Power to MECC is provided by RVP (battery + DC Jack + Type C) -2. Power control pins for Intel SOC are added -3. Servo V2 header need to be added by MECC -4. Google H1 chip need to be added by MECC (optional for EC vendors) -5. 4 Type-C port support (SRC/SNK/BC1.2/MUX/Rerimer) as Add In Card (AIC) on - RVP -6. Optional 2 Type-C port routed to MECC for integrated TCPC support -7. 6 I2C Channels -8. 2 SMLINK Channels -9. 2 I3C channels - -## MECC version 1.1 features - -1. Power to MECC is provided by RVP (battery + DC Jack + Type C) -2. Power control pins for Intel SOC are added -3. Servo V2 header is added on RVP as an AIC -4. Google H1 chip is added on RVP as an AIC -5. 4 Type-C port support (SRC/SNK/MUX/Rerimer) as an (AIC) -6. Optional 2 Type-C port routed to MECC for integrated TCPC support -7. 6 I2C Channels -8. 2 SMLINK Channels -9. 2 I3C channels -10. 1 Fan control -11. 4 ADC based temperature sensors -12. PECI control -13. I2C based Keyboard is added on RVP as an AIC -14. Both Google & Intel CCD support is added on RVP on Type-C port 0 |