1 files changed, 0 insertions, 130 deletions
diff --git a/baseboard/intelrvp/chg_usb_pd.c b/baseboard/intelrvp/chg_usb_pd.c
deleted file mode 100644
index 9f64cdd4e7..0000000000
--- a/baseboard/intelrvp/chg_usb_pd.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Common USB PD charge configuration */
-
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "hooks.h"
-#include "tcpm/tcpci.h"
-
-#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
-
-bool is_typec_port(int port)
-{
-#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
-	return !(port == DEDICATED_CHARGE_PORT || port == CHARGE_PORT_NONE);
-#else
-	return !(port == CHARGE_PORT_NONE);
-#endif /* CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 */
-}
-
-static inline int board_dc_jack_present(void)
-{
-#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
-	return gpio_get_level(GPIO_DC_JACK_PRESENT);
-#else
-	return 0;
-#endif
-}
-
-#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
-static void board_dc_jack_handle(void)
-{
-	struct charge_port_info charge_dc_jack;
-
-	/* System is booted from DC Jack */
-	if (board_dc_jack_present()) {
-		charge_dc_jack.current = (PD_MAX_POWER_MW * 1000) /
-					DC_JACK_MAX_VOLTAGE_MV;
-		charge_dc_jack.voltage = DC_JACK_MAX_VOLTAGE_MV;
-	} else {
-		charge_dc_jack.current = 0;
-		charge_dc_jack.voltage = USB_CHARGER_VOLTAGE_MV;
-	}
-
-	charge_manager_update_charge(CHARGE_SUPPLIER_DEDICATED,
-				DEDICATED_CHARGE_PORT, &charge_dc_jack);
-}
-#endif
-
-void board_dc_jack_interrupt(enum gpio_signal signal)
-{
-#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
-	board_dc_jack_handle();
-#endif
-}
-
-static void board_charge_init(void)
-{
-	int port, supplier;
-	struct charge_port_info charge_init = {
-		.current = 0,
-		.voltage = USB_CHARGER_VOLTAGE_MV,
-	};
-
-	/* Initialize all charge suppliers to seed the charge manager */
-	for (port = 0; port < CHARGE_PORT_COUNT; port++) {
-		for (supplier = 0; supplier < CHARGE_SUPPLIER_COUNT; supplier++)
-			charge_manager_update_charge(supplier, port,
-				&charge_init);
-	}
-
-#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
-	board_dc_jack_handle();
-#endif /* CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 */
-}
-DECLARE_HOOK(HOOK_INIT, board_charge_init, HOOK_PRIO_DEFAULT);
-
-int board_set_active_charge_port(int port)
-{
-	int i;
-	/* charge port is a realy physical port */
-	int is_real_port = (port >= 0 &&
-			port < CHARGE_PORT_COUNT);
-	/* check if we are source vbus on that port */
-	int source = board_vbus_source_enabled(port);
-
-	if (is_real_port && source) {
-		CPRINTS("Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
-	/*
-	 * Do not enable Type-C port if the DC Jack is present.
-	 * When the Type-C is active port, hardware circuit will
-	 * block DC jack from enabling +VADP_OUT.
-	 */
-	if (port != DEDICATED_CHARGE_PORT && board_dc_jack_present()) {
-		CPRINTS("DC Jack present, Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-#endif /* CONFIG_DEDICATED_CHARGE_PORT_COUNT */
-
-	/* Make sure non-charging ports are disabled */
-	for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
-		if (i == port)
-			continue;
-
-		board_charging_enable(i, 0);
-	}
-
-	/* Enable charging port */
-	if (is_typec_port(port))
-		board_charging_enable(port, 1);
-
-	CPRINTS("New chg p%d", port);
-
-	return EC_SUCCESS;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma,
-			    int max_ma, int charge_mv)
-{
-	charge_set_input_current_limit(MAX(charge_ma,
-				CONFIG_CHARGER_INPUT_CURRENT), charge_mv);
-}