1 files changed, 0 insertions, 88 deletions
diff --git a/baseboard/intelrvp/mchp_ec.c b/baseboard/intelrvp/mchp_ec.c
deleted file mode 100644
index f1eb4678c1..0000000000
--- a/baseboard/intelrvp/mchp_ec.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Intel BASEBOARD-RVP MCHP EC specific configuration */
-
-#include "adc_chip.h"
-#include "common.h"
-#include "keyboard_scan.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "timer.h"
-#include "usb_pd_tcpm.h"
-
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
-	/*
-	 * F3 key scan cycle completed but scan input is not
-	 * charging to logic high when EC start scan next
-	 * column for "T" key, so we set .output_settle_us
-	 * to 80 us from 50 us.
-	 */
-	.output_settle_us = 80,
-	.debounce_down_us = 9 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-	.actual_key_mask = {
-		0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
-	},
-};
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_TEMP_SNS_AMBIENT] = {
-		.name = "ADC_TEMP_SNS_AMBIENT",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = ADC_TEMP_SNS_AMBIENT_CHANNEL,
-	},
-	[ADC_TEMP_SNS_DDR] = {
-		.name = "ADC_TEMP_SNS_DDR",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = ADC_TEMP_SNS_DDR_CHANNEL,
-	},
-	[ADC_TEMP_SNS_SKIN] = {
-		.name = "ADC_TEMP_SNS_SKIN",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = ADC_TEMP_SNS_SKIN_CHANNEL,
-	},
-	[ADC_TEMP_SNS_VR] = {
-		.name = "ADC_TEMP_SNS_VR",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = ADC_TEMP_SNS_VR_CHANNEL,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/*
- * TODO - Fan and tach table.
- * MCHP MEC1322 and MEC170x have fan speed controller(s)
- * whereas MEC152x only has multiple TACH and PWM modules.
- * MEC152x fan control will require a firmware layer that uses
- * specified TACH and PWM modules.
- */
-
-/* PWM channels */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_FAN] = {
-#ifdef CHIP_FAMILY_MEC172X
-		.channel = PWM_HW_CH_0,
-#else
-		.channel = PWM_HW_CH_4,
-#endif
-		.flags = PWM_CONFIG_HAS_RPM_MODE,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);