diff options
Diffstat (limited to 'baseboard/nucleo-h743zi/base-board.h')
| -rw-r--r-- | baseboard/nucleo-h743zi/base-board.h | 179 |
1 files changed, 0 insertions, 179 deletions
diff --git a/baseboard/nucleo-h743zi/base-board.h b/baseboard/nucleo-h743zi/base-board.h deleted file mode 100644 index df5e4bfa8c..0000000000 --- a/baseboard/nucleo-h743zi/base-board.h +++ /dev/null @@ -1,179 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Nucleo-H743ZI baseboard configuration */ - -#ifndef __CROS_EC_BASE_BOARD_H -#define __CROS_EC_BASE_BOARD_H - -/* - * Flash layout: - * - * +++++++++++++ - * | RO | Bank 1 - * | | - * | | - * | ......... | - * | Rollback | (last two sectors) - * +-----------+ - * | RW | Bank 2 - * | | - * | | - * | | - * | | - * +++++++++++++ - * - * We adjust the following macros to accommodate a rollback region - * and RO/RW regions of different sizes. - */ - -#undef _IMAGE_SIZE -#undef CONFIG_ROLLBACK_OFF -#undef CONFIG_ROLLBACK_SIZE -#undef CONFIG_FLASH_PSTATE -#undef CONFIG_FW_PSTATE_SIZE -#undef CONFIG_FW_PSTATE_OFF -#undef CONFIG_RO_MEM_OFF -#undef CONFIG_RO_STORAGE_OFF -#undef CONFIG_RO_SIZE -#undef CONFIG_RW_MEM_OFF -#undef CONFIG_RW_STORAGE_OFF -#undef CONFIG_RW_SIZE -#undef CONFIG_EC_PROTECTED_STORAGE_OFF -#undef CONFIG_EC_PROTECTED_STORAGE_SIZE -#undef CONFIG_EC_WRITABLE_STORAGE_OFF -#undef CONFIG_EC_WRITABLE_STORAGE_SIZE -#undef CONFIG_WP_STORAGE_OFF -#undef CONFIG_WP_STORAGE_SIZE - -/* - * EC rollback protection block - * - * We need 2 independently erasable blocks, at a minimum. - */ -#define CONFIG_ROLLBACK_SIZE (2 * CONFIG_FLASH_BANK_SIZE) -#define CONFIG_ROLLBACK_OFF ((CONFIG_FLASH_SIZE_BYTES / 2) - \ - CONFIG_ROLLBACK_SIZE) - -#define CONFIG_RO_MEM_OFF 0 -#define CONFIG_RO_SIZE CONFIG_ROLLBACK_OFF -#define CONFIG_RW_MEM_OFF (CONFIG_FLASH_SIZE_BYTES / 2) -#define CONFIG_RW_SIZE (CONFIG_FLASH_SIZE_BYTES / 2) - -#define CONFIG_RO_STORAGE_OFF 0 -#define CONFIG_RW_STORAGE_OFF 0 - -#define CONFIG_EC_PROTECTED_STORAGE_OFF CONFIG_RO_MEM_OFF -#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE -#define CONFIG_EC_WRITABLE_STORAGE_OFF CONFIG_RW_MEM_OFF -#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE - -#define CONFIG_WP_STORAGE_OFF CONFIG_EC_PROTECTED_STORAGE_OFF -#define CONFIG_WP_STORAGE_SIZE CONFIG_EC_PROTECTED_STORAGE_SIZE - -/* Disabled features */ - -#undef CONFIG_ADC -#undef CONFIG_HIBERNATE -#undef CONFIG_I2C -#undef CONFIG_LID_SWITCH -#undef CONFIG_TASK_PROFILING - -/* Enabled features */ - -#define CONFIG_AES -#define CONFIG_AES_GCM -#define CONFIG_DMA -#define CONFIG_FORCE_CONSOLE_RESUME -#define CONFIG_FPU -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -#define CONFIG_PRINTF_LEGACY_LI_FORMAT -#define CONFIG_RNG -#define CONFIG_RWSIG_TYPE_RWSIG -#define CONFIG_SHA256 -#define CONFIG_SHA256_UNROLLED -#undef CONFIG_SHAREDLIB_SIZE -#define CONFIG_SHAREDLIB_SIZE 0 -#define CONFIG_STM_HWTIMER32 -#define CONFIG_WATCHDOG_HELP -#define CONFIG_WP_ACTIVE_HIGH - -#ifndef TEST_BUILD - /* TODO(hesling): Fix the illogical dependency between spi.c - * and host_command.c - * - * Currently, the chip/stm32/spi.c depends on functions defined in - * common/host_command.c. When unit test builds use their own tasklist - * without the HOSTCMD task, host_command.c is excluded from the build, - * but chip/stm32/spi.c remains (because of CONFIG_SPI). - * This triggers an undefined reference linker error. - * The reproduce case: - * - Allow CONFIG_SPI in TEST_BUILDs - * - make BOARD=nucleo-h743zi tests - */ -# define CONFIG_SPI -#endif - -/* - * We want to prevent flash readout, and use it as indicator of protection - * status. - */ -#define CONFIG_FLASH_READOUT_PROTECTION_AS_PSTATE - -/* - * RW does slow compute, RO does slow flash erase. - */ -#undef CONFIG_WATCHDOG_PERIOD_MS -#define CONFIG_WATCHDOG_PERIOD_MS 10000 - -/* Setup UART console */ - -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 3 /* The UART console is on USART3 */ -#define CONFIG_UART_TX_DMA -#define CONFIG_UART_TX_DMA_PH DMAMUX1_REQ_USART3_TX -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 2048 - -/* Console commands */ - -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IDLE_STATS - -#ifdef SECTION_IS_RO - /* RO verifies the RW partition signature */ -# define CONFIG_RSA -# define CONFIG_RWSIG -#endif /* SECTION_IS_RO */ - -#define CONFIG_RSA_KEY_SIZE 3072 -#define CONFIG_RSA_EXPONENT_3 - -/* - * We do not use any "locally" generated entropy: this is normally used - * to add local entropy when the main source of entropy is remote. - */ -#undef CONFIG_ROLLBACK_SECRET_LOCAL_ENTROPY_SIZE -#ifdef SECTION_IS_RW -# undef CONFIG_ROLLBACK_UPDATE -#endif -/* - * Add rollback protection - */ -#define CONFIG_ROLLBACK -#define CONFIG_ROLLBACK_MPU_PROTECT - -#ifndef __ASSEMBLER__ - /* Timer selection */ -# define TIM_CLOCK32 2 -# define TIM_WATCHDOG 16 -# include "gpio_signal.h" - void button_event(enum gpio_signal signal); -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASE_BOARD_H */ |