7 files changed, 0 insertions, 270 deletions
diff --git a/baseboard/nucleo-h743zi/base-board.c b/baseboard/nucleo-h743zi/base-board.c
deleted file mode 100644
index 15e46f006e..0000000000
--- a/baseboard/nucleo-h743zi/base-board.c
+++ /dev/null
@@ -1,11 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "common.h"
-#include "gpio.h"
-
-__overridable void button_event(enum gpio_signal signal)
-{
-}
diff --git a/baseboard/nucleo-h743zi/base-board.h b/baseboard/nucleo-h743zi/base-board.h
deleted file mode 100644
index df5e4bfa8c..0000000000
--- a/baseboard/nucleo-h743zi/base-board.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Nucleo-H743ZI baseboard configuration */
-
-#ifndef __CROS_EC_BASE_BOARD_H
-#define __CROS_EC_BASE_BOARD_H
-
-/*
- * Flash layout:
- *
- * +++++++++++++
- * |    RO     | Bank 1
- * |           |
- * |           |
- * | ......... |
- * |  Rollback | (last two sectors)
- * +-----------+
- * |    RW     | Bank 2
- * |           |
- * |           |
- * |           |
- * |           |
- * +++++++++++++
- *
- * We adjust the following macros to accommodate a rollback region
- * and RO/RW regions of different sizes.
- */
-
-#undef _IMAGE_SIZE
-#undef CONFIG_ROLLBACK_OFF
-#undef CONFIG_ROLLBACK_SIZE
-#undef CONFIG_FLASH_PSTATE
-#undef CONFIG_FW_PSTATE_SIZE
-#undef CONFIG_FW_PSTATE_OFF
-#undef CONFIG_RO_MEM_OFF
-#undef CONFIG_RO_STORAGE_OFF
-#undef CONFIG_RO_SIZE
-#undef CONFIG_RW_MEM_OFF
-#undef CONFIG_RW_STORAGE_OFF
-#undef CONFIG_RW_SIZE
-#undef CONFIG_EC_PROTECTED_STORAGE_OFF
-#undef CONFIG_EC_PROTECTED_STORAGE_SIZE
-#undef CONFIG_EC_WRITABLE_STORAGE_OFF
-#undef CONFIG_EC_WRITABLE_STORAGE_SIZE
-#undef CONFIG_WP_STORAGE_OFF
-#undef CONFIG_WP_STORAGE_SIZE
-
-/*
- * EC rollback protection block
- *
- * We need 2 independently erasable blocks, at a minimum.
- */
-#define CONFIG_ROLLBACK_SIZE   (2 * CONFIG_FLASH_BANK_SIZE)
-#define CONFIG_ROLLBACK_OFF    ((CONFIG_FLASH_SIZE_BYTES / 2) - \
-				CONFIG_ROLLBACK_SIZE)
-
-#define CONFIG_RO_MEM_OFF      0
-#define CONFIG_RO_SIZE         CONFIG_ROLLBACK_OFF
-#define CONFIG_RW_MEM_OFF      (CONFIG_FLASH_SIZE_BYTES / 2)
-#define CONFIG_RW_SIZE         (CONFIG_FLASH_SIZE_BYTES / 2)
-
-#define CONFIG_RO_STORAGE_OFF  0
-#define CONFIG_RW_STORAGE_OFF  0
-
-#define CONFIG_EC_PROTECTED_STORAGE_OFF   CONFIG_RO_MEM_OFF
-#define CONFIG_EC_PROTECTED_STORAGE_SIZE  CONFIG_RO_SIZE
-#define CONFIG_EC_WRITABLE_STORAGE_OFF    CONFIG_RW_MEM_OFF
-#define CONFIG_EC_WRITABLE_STORAGE_SIZE   CONFIG_RW_SIZE
-
-#define CONFIG_WP_STORAGE_OFF             CONFIG_EC_PROTECTED_STORAGE_OFF
-#define CONFIG_WP_STORAGE_SIZE            CONFIG_EC_PROTECTED_STORAGE_SIZE
-
-/* Disabled features */
-
-#undef CONFIG_ADC
-#undef CONFIG_HIBERNATE
-#undef CONFIG_I2C
-#undef CONFIG_LID_SWITCH
-#undef CONFIG_TASK_PROFILING
-
-/* Enabled features */
-
-#define CONFIG_AES
-#define CONFIG_AES_GCM
-#define CONFIG_DMA
-#define CONFIG_FORCE_CONSOLE_RESUME
-#define CONFIG_FPU
-#define CONFIG_HOST_COMMAND_STATUS
-#define CONFIG_LOW_POWER_IDLE
-#define CONFIG_MKBP_EVENT
-#define CONFIG_MKBP_USE_GPIO
-#define CONFIG_PRINTF_LEGACY_LI_FORMAT
-#define CONFIG_RNG
-#define CONFIG_RWSIG_TYPE_RWSIG
-#define CONFIG_SHA256
-#define CONFIG_SHA256_UNROLLED
-#undef CONFIG_SHAREDLIB_SIZE
-#define CONFIG_SHAREDLIB_SIZE   0
-#define CONFIG_STM_HWTIMER32
-#define CONFIG_WATCHDOG_HELP
-#define CONFIG_WP_ACTIVE_HIGH
-
-#ifndef TEST_BUILD
-	/* TODO(hesling): Fix the illogical dependency between spi.c
-	 *                and host_command.c
-	 *
-	 * Currently, the chip/stm32/spi.c depends on functions defined in
-	 * common/host_command.c. When unit test builds use their own tasklist
-	 * without the HOSTCMD task, host_command.c is excluded from the build,
-	 * but chip/stm32/spi.c remains (because of CONFIG_SPI).
-	 * This triggers an undefined reference linker error.
-	 * The reproduce case:
-	 * - Allow CONFIG_SPI in TEST_BUILDs
-	 * - make BOARD=nucleo-h743zi tests
-	 */
-#	define CONFIG_SPI
-#endif
-
-/*
- * We want to prevent flash readout, and use it as indicator of protection
- * status.
- */
-#define CONFIG_FLASH_READOUT_PROTECTION_AS_PSTATE
-
-/*
- * RW does slow compute, RO does slow flash erase.
- */
-#undef CONFIG_WATCHDOG_PERIOD_MS
-#define CONFIG_WATCHDOG_PERIOD_MS 10000
-
-/* Setup UART console */
-
-#undef CONFIG_UART_CONSOLE
-#define CONFIG_UART_CONSOLE 3 /* The UART console is on USART3 */
-#define CONFIG_UART_TX_DMA
-#define CONFIG_UART_TX_DMA_PH DMAMUX1_REQ_USART3_TX
-#undef CONFIG_UART_TX_BUF_SIZE
-#define CONFIG_UART_TX_BUF_SIZE 2048
-
-/* Console commands */
-
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IDLE_STATS
-
-#ifdef SECTION_IS_RO
-	/* RO verifies the RW partition signature */
-#	define CONFIG_RSA
-#	define CONFIG_RWSIG
-#endif  /* SECTION_IS_RO */
-
-#define CONFIG_RSA_KEY_SIZE 3072
-#define CONFIG_RSA_EXPONENT_3
-
-/*
- * We do not use any "locally" generated entropy: this is normally used
- * to add local entropy when the main source of entropy is remote.
- */
-#undef CONFIG_ROLLBACK_SECRET_LOCAL_ENTROPY_SIZE
-#ifdef SECTION_IS_RW
-#	undef CONFIG_ROLLBACK_UPDATE
-#endif
-/*
- * Add rollback protection
- */
-#define CONFIG_ROLLBACK
-#define CONFIG_ROLLBACK_MPU_PROTECT
-
-#ifndef __ASSEMBLER__
-	/* Timer selection */
-#	define TIM_CLOCK32 2
-#	define TIM_WATCHDOG 16
-#	include "gpio_signal.h"
-	void button_event(enum gpio_signal signal);
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BASE_BOARD_H */
diff --git a/baseboard/nucleo-h743zi/base-ec.tasklist b/baseboard/nucleo-h743zi/base-ec.tasklist
deleted file mode 100644
index fae8952113..0000000000
--- a/baseboard/nucleo-h743zi/base-ec.tasklist
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/**
- * See CONFIG_TASK_LIST in config.h for details.
- */
-#define BASEBOARD_CONFIG_TASK_LIST \
-	TASK_ALWAYS_RO(RWSIG, rwsig_task, NULL, 1280) \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, 1024) \
-	TASK_NOTEST(HOSTCMD, host_command_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, CONSOLE_TASK_STACK_SIZE)
diff --git a/baseboard/nucleo-h743zi/base-gpio.inc b/baseboard/nucleo-h743zi/base-gpio.inc
deleted file mode 100644
index ef224cbaf1..0000000000
--- a/baseboard/nucleo-h743zi/base-gpio.inc
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * Note that these pins map to the Nucleo-H743ZI V2 and are only slightly
- * compatible with the original version.
- *
- * The V2 is denoted by "Nucleo-H743ZI2" vs. "Nucleo-H743ZI".
- */
-
-/* Inputs ands Interrupts */
-GPIO_INT(SPI1_NSS,        PIN(A, 4),  GPIO_INPUT, spi_event)
-GPIO_INT(BTN1,            PIN(C, 13), GPIO_INT_BOTH, button_event)
-GPIO(WP,                  PIN(B, 7),  GPIO_INPUT)
-
-/* Outputs */
-GPIO(EC_INT_L,            PIN(A, 1),  GPIO_OUT_HIGH)
-GPIO(LED1,                PIN(B, 0),  GPIO_OUT_LOW) /* Green */
-GPIO(LED2,                PIN(E, 1),  GPIO_OUT_LOW) /* Yellow */
-GPIO(LED3,                PIN(B, 14), GPIO_OUT_LOW) /* Red */
-
-UNIMPLEMENTED(ENTERING_RW)
-
-/* USART3: PD8/PD9 */
-ALTERNATE(PIN_MASK(D, 0x0300), GPIO_ALT_USART,  MODULE_UART, GPIO_PULL_UP)
-/* SPI1 slave from the AP: PA4/5/6/7 */
-ALTERNATE(PIN_MASK(A, 0x00f0), GPIO_ALT_SPI, MODULE_SPI,  0)
diff --git a/baseboard/nucleo-h743zi/build.mk b/baseboard/nucleo-h743zi/build.mk
deleted file mode 100644
index e9f9ae3faa..0000000000
--- a/baseboard/nucleo-h743zi/build.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-# -*- makefile -*-
-# Copyright 2020 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Nucleo-H743ZI baseboard specific files build
-#
-
-# the IC is STmicro STM32H743
-CHIP:=stm32
-CHIP_FAMILY:=stm32h7
-CHIP_VARIANT:=stm32h7x3
-
-baseboard-y=base-board.o
-\ No newline at end of file
diff --git a/baseboard/nucleo-h743zi/openocd-flash.cfg b/baseboard/nucleo-h743zi/openocd-flash.cfg
deleted file mode 100644
index 4517266d7b..0000000000
--- a/baseboard/nucleo-h743zi/openocd-flash.cfg
+++ /dev/null
@@ -1,14 +0,0 @@
-# Copyright 2019 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-
-source [find board/st_nucleo_h743zi.cfg]
-
-gdb_port 0
-tcl_port 0
-telnet_port 0
-init
-reset halt
-flash write_image erase $BUILD_DIR/ec.bin 0x08000000
-reset
-shutdown
diff --git a/baseboard/nucleo-h743zi/openocd.cfg b/baseboard/nucleo-h743zi/openocd.cfg
deleted file mode 100644
index 528e8d6cab..0000000000
--- a/baseboard/nucleo-h743zi/openocd.cfg
+++ /dev/null
@@ -1,9 +0,0 @@
-# Copyright 2019 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-
-source [find board/st_nucleo_h743zi.cfg]
-
-# Enabled EC task context support
-# This is supported by the upstream OpenOCD
-$_TARGETNAME configure -rtos Chromium-EC