diff options
Diffstat (limited to 'baseboard/trogdor/baseboard.h')
| -rw-r--r-- | baseboard/trogdor/baseboard.h | 90 |
1 files changed, 44 insertions, 46 deletions
diff --git a/baseboard/trogdor/baseboard.h b/baseboard/trogdor/baseboard.h index d65fb2dc1e..63813c89a0 100644 --- a/baseboard/trogdor/baseboard.h +++ b/baseboard/trogdor/baseboard.h @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -13,12 +13,12 @@ * The sensor stack is generating a lot of activity. * They can be enabled through the console command 'chan'. */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_HOSTCMD))) +#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_HOSTCMD))) /* NPCX7 config */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ -#define NPCX_TACH_SEL2 0 /* No tach. */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ +#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ +#define NPCX_TACH_SEL2 0 /* No tach. */ +#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ /* Internal SPI flash on NPCX7 */ #define CONFIG_SPI_FLASH_REGS @@ -142,13 +142,13 @@ #define CONFIG_CMD_ACCEL_INFO /* PD */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ -#define PD_OPERATING_POWER_MW 10000 -#define PD_MAX_POWER_MW ((PD_MAX_VOLTAGE_MV * PD_MAX_CURRENT_MA) / 1000) -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_OPERATING_POWER_MW 10000 +#define PD_MAX_POWER_MW ((PD_MAX_VOLTAGE_MV * PD_MAX_CURRENT_MA) / 1000) +#define PD_MAX_CURRENT_MA 3000 +#define PD_MAX_VOLTAGE_MV 20000 /* Chipset */ #define CONFIG_CHIPSET_SC7180 @@ -166,56 +166,54 @@ * then redefined here to so it's more clear which signal is being used for * which purpose. */ -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL -#define GPIO_LID_OPEN GPIO_LID_OPEN_EC -#define GPIO_SHI_CS_L GPIO_AP_EC_SPI_CS_L -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_BATT_PRES_ODL GPIO_EC_BATT_PRES_ODL -#define GPIO_EN_PP5000 GPIO_EN_PP5000_A -#define GPIO_ENABLE_BACKLIGHT GPIO_EC_BL_DISABLE_L -#define GPIO_BOARD_VERSION1 GPIO_BRD_ID0 -#define GPIO_BOARD_VERSION2 GPIO_BRD_ID1 -#define GPIO_BOARD_VERSION3 GPIO_BRD_ID2 -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV +#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL +#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL +#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL +#define GPIO_LID_OPEN GPIO_LID_OPEN_EC +#define GPIO_SHI_CS_L GPIO_AP_EC_SPI_CS_L +#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW +#define GPIO_BATT_PRES_ODL GPIO_EC_BATT_PRES_ODL +#define GPIO_EN_PP5000 GPIO_EN_PP5000_A +#define GPIO_ENABLE_BACKLIGHT GPIO_EC_BL_DISABLE_L +#define GPIO_BOARD_VERSION1 GPIO_BRD_ID0 +#define GPIO_BOARD_VERSION2 GPIO_BRD_ID1 +#define GPIO_BOARD_VERSION3 GPIO_BRD_ID2 +#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV /* I2C Ports */ #define I2C_PORT_BATTERY I2C_PORT_POWER #define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY #define I2C_PORT_CHARGER I2C_PORT_POWER -#define I2C_PORT_ACCEL I2C_PORT_SENSOR -#define I2C_PORT_POWER NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 -#define I2C_PORT_WLC NPCX_I2C_PORT3_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT7_0 +#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_POWER NPCX_I2C_PORT0_0 +#define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 +#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 +#define I2C_PORT_WLC NPCX_I2C_PORT3_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT5_0 +#define I2C_PORT_SENSOR NPCX_I2C_PORT7_0 /* UART */ #define CONFIG_CMD_CHARGEN /* Define the host events which are allowed to wake AP up from S3 */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_RTC) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_DEVICE)) +#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_RTC) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_DEVICE)) /* And the MKBP events */ #ifdef HAS_TASK_KEYSCAN -#define CONFIG_MKBP_EVENT_WAKEUP_MASK \ - (BIT(EC_MKBP_EVENT_KEY_MATRIX) | \ - BIT(EC_MKBP_EVENT_HOST_EVENT) | \ - BIT(EC_MKBP_EVENT_SENSOR_FIFO)) +#define CONFIG_MKBP_EVENT_WAKEUP_MASK \ + (BIT(EC_MKBP_EVENT_KEY_MATRIX) | BIT(EC_MKBP_EVENT_HOST_EVENT) | \ + BIT(EC_MKBP_EVENT_SENSOR_FIFO)) #else #define CONFIG_MKBP_EVENT_WAKEUP_MASK \ - (BIT(EC_MKBP_EVENT_HOST_EVENT) | \ - BIT(EC_MKBP_EVENT_SENSOR_FIFO)) + (BIT(EC_MKBP_EVENT_HOST_EVENT) | BIT(EC_MKBP_EVENT_SENSOR_FIFO)) #endif #endif /* __CROS_EC_BASEBOARD_H */ |