1 files changed, 0 insertions, 104 deletions
diff --git a/baseboard/volteer/charger.c b/baseboard/volteer/charger.c
deleted file mode 100644
index a674b98f41..0000000000
--- a/baseboard/volteer/charger.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer family-specific configuration */
-#include "common.h"
-#include "charger.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "driver/charger/isl9241_public.h"
-#include "gpio.h"
-#ifdef CONFIG_ZEPHYR
-#include "usbc_config.h"
-#endif
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* Charger Chip Configuration */
-const struct charger_config_t chg_chips[] = {
-	{
-		.i2c_port = I2C_PORT_CHARGER,
-		.i2c_addr_flags = ISL9241_ADDR_FLAGS,
-		.drv = &isl9241_drv,
-	},
-};
-
-int board_set_active_charge_port(int port)
-{
-	int is_valid_port = (port >= 0 &&
-			     port < CONFIG_USB_PD_PORT_MAX_COUNT);
-	int i;
-
-	if (port == CHARGE_PORT_NONE) {
-		CPRINTSUSB("Disabling all charger ports");
-
-		/* Disable all ports. */
-		for (i = 0; i < ppc_cnt; i++) {
-			/*
-			 * Do not return early if one fails otherwise we can
-			 * get into a boot loop assertion failure.
-			 */
-			if (ppc_vbus_sink_enable(i, 0))
-				CPRINTSUSB("Disabling C%d as sink failed.", i);
-		}
-
-		return EC_SUCCESS;
-	} else if (!is_valid_port) {
-		return EC_ERROR_INVAL;
-	}
-
-
-	/* Check if the port is sourcing VBUS. */
-	if (ppc_is_sourcing_vbus(port)) {
-		CPRINTFUSB("Skip enable C%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-	CPRINTSUSB("New charge port: C%d", port);
-
-	/*
-	 * Turn off the other ports' sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < ppc_cnt; i++) {
-		if (i == port)
-			continue;
-
-		if (ppc_vbus_sink_enable(i, 0))
-			CPRINTSUSB("C%d: sink path disable failed.", i);
-	}
-
-	/* Enable requested charge port. */
-	if (ppc_vbus_sink_enable(port, 1)) {
-		CPRINTSUSB("C%d: sink path enable failed.", port);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	return EC_SUCCESS;
-}
-
-__overridable void board_set_charge_limit(int port, int supplier, int charge_ma,
-			    int max_ma, int charge_mv)
-{
-	charge_set_input_current_limit(MAX(charge_ma,
-					CONFIG_CHARGER_INPUT_CURRENT),
-					charge_mv);
-}
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* Note that the level is inverted because the pin is active low. */
-	switch (port) {
-	case USBC_PORT_C0:
-		gpio_set_level(GPIO_USB_C0_OC_ODL, !is_overcurrented);
-		break;
-	case USBC_PORT_C1:
-		gpio_set_level(GPIO_USB_C1_OC_ODL, !is_overcurrented);
-		break;
-	}
-}