diff options
Diffstat (limited to 'baseboard/zork/variant_dalboz.c')
| -rw-r--r-- | baseboard/zork/variant_dalboz.c | 220 |
1 files changed, 0 insertions, 220 deletions
diff --git a/baseboard/zork/variant_dalboz.c b/baseboard/zork/variant_dalboz.c deleted file mode 100644 index 10058bb8bc..0000000000 --- a/baseboard/zork/variant_dalboz.c +++ /dev/null @@ -1,220 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "adc.h" -#include "charger.h" -#include "chipset.h" -#include "common.h" -#include "driver/charger/isl9241.h" -#include "driver/temp_sensor/sb_tsi.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "power.h" -#include "temp_sensor.h" -#include "temp_sensor/thermistor.h" - -const struct power_signal_info power_signal_list[] = { - [X86_SLP_S3_N] = { - .gpio = GPIO_PCH_SLP_S3_L, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "SLP_S3_DEASSERTED", - }, - [X86_SLP_S5_N] = { - .gpio = GPIO_PCH_SLP_S5_L, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "SLP_S5_DEASSERTED", - }, - [X86_S0_PGOOD] = { - .gpio = GPIO_S0_PGOOD, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "S0_PGOOD", - }, - [X86_S5_PGOOD] = { - .gpio = GPIO_S5_PGOOD, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "S5_PGOOD", - }, -}; -BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); - -int board_get_temp(int idx, int *temp_k) -{ - int mv; - int temp_c; - enum adc_channel channel; - - /* idx is the sensor index set in board temp_sensors[] */ - switch (idx) { - case TEMP_SENSOR_CHARGER: - channel = ADC_TEMP_SENSOR_CHARGER; - break; - case TEMP_SENSOR_SOC: - /* thermistor is not powered in G3 */ - if (chipset_in_state(CHIPSET_STATE_HARD_OFF)) - return EC_ERROR_NOT_POWERED; - - /* adc power not ready when transition to S5 */ - if (chipset_in_or_transitioning_to_state( - CHIPSET_STATE_SOFT_OFF)) - return EC_ERROR_NOT_POWERED; - - channel = ADC_TEMP_SENSOR_SOC; - break; - default: - return EC_ERROR_INVAL; - } - - mv = adc_read_channel(channel); - if (mv < 0) - return EC_ERROR_INVAL; - - temp_c = thermistor_linear_interpolate(mv, &thermistor_info); - *temp_k = C_TO_K(temp_c); - return EC_SUCCESS; -} - -const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_CHARGER] = { - .name = "CHARGER", - .input_ch = NPCX_ADC_CH2, - .factor_mul = ADC_MAX_VOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - }, - [ADC_TEMP_SENSOR_SOC] = { - .name = "SOC", - .input_ch = NPCX_ADC_CH3, - .factor_mul = ADC_MAX_VOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_CHARGER] = { - .name = "Charger", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = board_get_temp, - .idx = TEMP_SENSOR_CHARGER, - }, - [TEMP_SENSOR_SOC] = { - .name = "SOC", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = board_get_temp, - .idx = TEMP_SENSOR_SOC, - }, - [TEMP_SENSOR_CPU] = { - .name = "CPU", - .type = TEMP_SENSOR_TYPE_CPU, - .read = sb_tsi_get_val, - .idx = 0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -__overridable struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT] = { - [TEMP_SENSOR_CHARGER] = { - .temp_host = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(90), - [EC_TEMP_THRESH_HALT] = C_TO_K(92), - }, - .temp_host_release = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(80), - } - }, - [TEMP_SENSOR_SOC] = { - .temp_host = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(90), - [EC_TEMP_THRESH_HALT] = C_TO_K(92), - }, - .temp_host_release = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(80), - } - }, - [TEMP_SENSOR_CPU] = { - .temp_host = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(90), - [EC_TEMP_THRESH_HALT] = C_TO_K(92), - }, - .temp_host_release = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(80), - } - }, -}; -BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT); - -const struct i2c_port_t i2c_ports[] = { - { - .name = "tcpc0", - .port = I2C_PORT_TCPC0, - .kbps = 400, - .scl = GPIO_EC_I2C_USB_A0_C0_SCL, - .sda = GPIO_EC_I2C_USB_A0_C0_SDA, - }, - { - .name = "tcpc1", - .port = I2C_PORT_TCPC1, - .kbps = 400, - .scl = GPIO_EC_I2C_USB_A1_C1_SCL, - .sda = GPIO_EC_I2C_USB_A1_C1_SDA, - }, - { - .name = "charger", - .port = I2C_PORT_CHARGER, - .kbps = 100, - .scl = GPIO_EC_I2C_POWER_SCL, - .sda = GPIO_EC_I2C_POWER_SDA, - }, - { - .name = "ap_mux", - .port = I2C_PORT_USB_AP_MUX, - .kbps = 400, - .scl = GPIO_EC_I2C_USBC_AP_MUX_SCL, - .sda = GPIO_EC_I2C_USBC_AP_MUX_SDA, - }, - { - .name = "thermal", - .port = I2C_PORT_THERMAL_AP, - .kbps = 400, - .scl = GPIO_FCH_SIC, - .sda = GPIO_FCH_SID, - }, - { - .name = "sensor", - .port = I2C_PORT_SENSOR, - .kbps = 400, - .scl = GPIO_EC_I2C_SENSOR_CBI_SCL, - .sda = GPIO_EC_I2C_SENSOR_CBI_SDA, - }, - { - .name = "ap_audio", - .port = I2C_PORT_AP_AUDIO, - .kbps = 400, - .scl = GPIO_I2C_AUDIO_USB_HUB_SCL, - .sda = GPIO_I2C_AUDIO_USB_HUB_SDA, - }, - { - .name = "battery", - .port = I2C_PORT_BATTERY_V1, - .kbps = 100, - .scl = GPIO_EC_I2C_BATT_SCL, - .sda = GPIO_EC_I2C_BATT_SDA, - }, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/***************************************************************************** - * Charger - */ - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL9241_ADDR_FLAGS, - .drv = &isl9241_drv, - }, -}; |